What is the max voltage rating for motherboard on Satellite 1110?

what is the maximum voltage rating for the motherboard in the Satellite 1110 please?
Because my current cpu (1.5ghz celeron) is 1.025 volts and i would like to change the cpu
to something faster (cooling will be dealt with btw XD)
The only problem being that the new cpu needs 1.3 volts to run.
Any info wud b much appreciated

I had the same machine years ago and I suggest you no to do this, because nothing will happen.
We tried to put a another CPU onto Mainboard and it simply didnt boot. I dont know why it didnt work, but luckily the machine started after that with the old CPU on the board again. I assume that the chipset is not giving enough power to CPU. I assume, when youre putting the wrong CPU on the Board then you, in the worst case, seriously damage your Mainboard.

Similar Messages

  • What is the max hard drive for a late 2006 xserve?

    What is the max hard drive for a late 2006 xserve?

    Hi Kappy,
    That's not quite true. I don't think anyone has managed to get a 3TB drive working as 3TB on an Xserve yet.. Here is the official compatibility matrix from Apple http://support.apple.com/kb/HT1219
    2TB seems to be the limit. Some people have had success with non Apple drives but it's very hit and miss..
    All the best
    Beatle

  • What is the max supported CPU for MSI 865PE-NEO2-LS?

    Can someone please tell me what is the max supported CPU speed for the MSI 865PE-NEO2-LS?  I have a P4 2.8@800Mhz, but was told that with a BIOS upgrade this motherboard can achieve up to 3.2?  Is that right, or can it support higher speeds such as the 3.4+
    Thank you!

    Hello,
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=433&kind=1
    I think A6728IMS.210 means BIOS 2.1 so it may already work with the 3.2Ghz CPU.
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=433&kind=1

  • What is the max clob length for Forms 6i with most recent updates.

    I am trying to determine what the largest clob is that can be handled by Forms 6i with the latest patches installed. I have searched the forum and the help files and have found a bunch of different answers, but nothing useful - nothing current.
    I have a record that has a clob field with 28,213 characters (including spaces) or 9902 characters (without spaces). Saved as a text file, it is 29kb.
    To read and work with the data in Forms, I have to set the DATA: Maximum Length to 110000, almost 3 times the length of the actual data. I can read and edit the field without problems.
    My questions are:
    1. what is the maximum size of data in a clob field that will work with Forms 6i and Oracle 10R2 database (Forms with the most recent update)?
    2. what is the Maximum Length - It certainly doesn't seem to be character. How do I set this - 3x Actual????
    Thanks for the help
    Glenn

    In theory it should be 64k bytes. In practice its often a bit less than that.

  • What is the max file limit for FTP adapter that uses FileIoInteractionSpec

    Hi,
    I know that Oracle provided some new features in 10.1.3.4 using which we can use the file and ftp adapter to move files in a more efficient way
    http://download.oracle.com/docs/cd/E12524_01/relnotes.1013/e12523/adapters.htm#CHDGFAAB
    Essentially it involves modifying the WSDL to use the new InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
    Now my question is, what is the file size limit which can be transferred using this.
    I have tried with 20 mb file, it works. But I want to know the upper limit.
    Thanks,
    Amit

    Tried with 31 mb file.
    It successfully delivers the file but....
    The instance never completes successfully in the BPEL Console. If I open the audit tab, it shows the following message
    There is a system exception while performing the BPEL instance, the reason is "JTA transaction is not present or the transaction is not in active state. The current JTA transaction is not present or it is not in active state when processing activity or instance "7,200,001". The reason is The execution of this instance "7200001" for process "TestFTPLimit" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.. Please consult your administrator regarding this error. ". Please check the error log file for more infromation. Please try to use bpel fault handlers to catch the faults in your bpel process. If this is a system exception, please report this to your system administrator. Administrator could perform manual recovery of the instance from last non-idempotent activity or dehydration point.less
    ORABPEL-02182
    JTA transaction is not present or the transaction is not in active state.
    The current JTA transaction is not present or it is not in active state when processing activity or instance "7,200,001". The reason is The execution of this instance "7200001" for process "TestFTPLimit" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
    Please consult your administrator regarding this error.
         at com.collaxa.cube.engine.CubeEngine.store(CubeEngine.java:5514)
    So does anybody know how to get over this.
    I understand that sync read is a sync operation, so obviously it was going to timeout, as this transfer took around 4 minutes for me. But then, isnt this a bug from Oracle's side

  • What is the max song limit for wifi media sync? Getting spinning clock and device acts locked up...

    Okay,
    So my device has been working fine for quite a while and I moved over OS6 when it was made available to the beta testing group about a month ago.
    So I decided to try out the wifi media sync last night and it took Desktop Manager about an hour to even come up with the list of music.  After I saw all my songs listed I synced over a few songs via USB to get the wireless sync portion all setup and make sure it was working.
    After I unplugged my device from USB and let it do it's thing over wifi it started up with the spinning clock and became VERY unresponsive.  Now everytime I start it up, it is somewhat workable for 1 minute or so and then the spinning clock comes back. (Even though I have shut off Wifi so it won't continue to attempt syncing)  I actually let it sit and run overnight but the device had a 601 error when I woke up and it needed a reset.  When it came back up it resumed with the spinning clock again.
    I'm thinking it's the number of files I have in my library, about 45,000...
    What's the most you've ever tried to use with media sync???  There is no provision inside the desktop manager as far as selecting which library you would like to sync or a way to reduce the number of songs it sees.  Only way to do this appears to be changing media player's libraries so that it doesn't see all the files.
    Really, I would like to be able to sync some of those files, but all of them are not needed.  And the fact that it basically makes my device unusable is the biggest problem.  I'm in the process of trying to disable it completely via desktop manager so I can have my device back....
    I looked around at various forums and can't seem to find anyone else running into this.  Anyone here had a similar or related problem?  What did you do to get around it?

    One other thing I found... It was still doing the spinning clock and locking up, but it took a while after boot for the problem to crop up.
    I pulled the media card and found that there was a media sync folder under Blackberry\System that had some files in there that were pretty big.  The artwork file was over 150MB and some other files were largish.
    I deleted the entire media sync folder and now it seems to be behaving itself.  No more spinning clock and it seems to be slowly returning to normal.  (Besides all the messages it deleted during the whole process)
    If anyone else runs into this I would say you should clean the folder off the media card along with disabling the sync.  Seems the BB still reads that folder and processes it if present.

  • What is the max hdd size for a macbook 2.1 (late 2006)

    I have a Macbook 2.1 (late 2006). Its 80 MB HDD crashed.
    What maximum HDD capacity/size can my Macbook handle?

    Replace it with any notebook sized, 2.5", SATA I or II HDD. Presently, the largest that will fit is a 1.5 GB drive by Toshiba. You cannot install a drive that is over 9.5 mm high.
    Look for drives at OWC to get an idea of what's available and pricing. You can buy the drive you want anywhere reliable you want, so look for the best price available for the make and model you choose. Good brands are Hitachi, Seagate, Toshiba, and Samsung.

  • What is the max HDD capacity for Satellite L300-1EI?

    Hi there,
    I have A laptop Sattelite L300 - 1EI Nodel PSLB8E - 05W013H2.
    Currently I have a Hard Disk with the capacity of 120G .
    It has lots of bad sectors.
    I wold like to know what is the maximum capacity I could replace it with.
    Thanks

    Thanks for answering.
    My problem is that I bought already a HDD of 500GB.
    The BIOS recognize the HDD.
    When I try to install Windows 7 the computer reads the files from the CD into memory
    and when it finishes, before it has the chance to start writing it switch itself off and re-boots.
    Is that mean that the contoller is gone or the capacity of the HDD is too high for this Laptop.
    Thanks

  • What is the safe voltage range for charging my iphone

    I tested a USB Car charger that I had, and it was putting out 5.68V.  Is that safe to charge my iPhone 5 with?  I thought it was supposed to be 5V.  I don't want to screw anything up.
    Thanks!

    Joe Z in VA wrote:
    All chargers are certified and regulated to hold a maximum output of 5V. Specific chargers modeled for higher power devices including iPads hold a maximum output of 10V but can take 5V instead.
    A difference of 0.68 more won't hurt the device much, despite that you used a tester.
    You are confusing your V with W
    Iphone uses 5V 1A ( 5w)
    iPad uses    5V  2A (10w)
    Not all chargers are certified Branded ones may be most far east copies definately not
    hence my reference to premium Brands

  • What is the power voltage for appletv

    What is the power voltage required for apple tv? This is not mentioned in the booklet.

    It's described as a Universal power supply and as far as I know assuming you're not hooking it up to some non-standard home made power supply it should work worldwide on known mains systems (at the very least in those countries where it is sold ANY AppleTV should adapt to the local mains power).
    AC
    http://www.apple.com/uk/appletv/specs.html

  • What is the max sample clock using the Shielded Single-Ended Flying-Lead Cable

    Hi
    What are the max practical limits for the sample clock using the Shielded Single-Ended Flying-Lead Cable?
    I am playing with the Labview embedded example "Dynamic Generation and Acquisition Source Synchronou.vi" using the Shielded Single-Ended Flying-Lead Cable and the PXIe-6556.
    This example write in the channels 0-7 and read in the channels 7-15.
    It also export the sample clock and data active event so we have a "Source Synchronous"
    I change the original example to set the input impedance to 50ohm and VH and VL voltatages.Write 3.3V - 0V and read 0.5V 0.3V.
    The problem is the signal integrity at higher frequencies. Please see the picture attached.
    Sample clock 30MHz
    50MHz
    70MHz
    90MHz
    Error: PLL could not phase-lock to the external reference clock.

    Hello engfpe,
    According Hardware manual the Maximum Sample Clock rate is 200 MHz.
    http://www.ni.com/datasheet/pdf/en/ds-421
    Is not clear for me if your error message was received on LabVIEW or on your Agilent Scope, and I don´t know your Agilent Scopes specifications. Neither I don´t know what exactly you are trying to generate, maybe if yo ucan clarify more your application and your issue I can help you more.
    Best regards,

  • HP Pavilion DV2700 Special Edition what is the max ram for this model laptop?

    HP Pavilion DV2700 VERVE Special Edition
    Operating System  Windows Vista 64 bit Service Pack 2
    Year made 2007 
    Processor AMD Turion 64 X2 TL- 60 2.0 GHz
    Current Ram 4GB
    would like to know what is the max ram 
    PS 
    Can i install and other Processor or is this and intergrated one with the motherboard.? 
    In Advance thank you for your time to look at my question
    Indarktimes
    This question was solved.
    View Solution.

    Hi
    Please find the link given below for your model off unit Max Memory supported is 4GB.
    http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06a/12139188-78299199-78299212-78299212-78299212-81135202....
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • What the max HDD size my Motherboard can take?

    I got these specs:
    Motherboard:   MSI MS-6342/K7M Pro (MS-6340M)/K7TM Pro (MS-6340)
    Bios: http://img230.echo.cx/img230/2712/pixx9kl.jpg
    I want to know if they can run on ATA 133, if they can get 16 mb Cache, and what is the max size max each HDD?
    It it not mentioned on the mainsite :-/

    Quote from: Fredrik Åsenius on 26-June-05, 06:47:00
    Hello Erwin!
    As it normally is the same BIOS for them, I think this might help:
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=131
    "On-Board IDE
    • An IDE controller on the VIA® VT82C686B Chipset provides IDE HDD / CD-ROM with PIO,
       Bus Master and Ultra DMA 33/66/100 operation modes. "
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=131&kind=1
    BIOS, update version 4.4
    "-Support HDD Size larger than 137GB"
    Hmm, how can you see if you have succesfully updated to version 4.4? because I am not sure if I did it right 
    Also it supports HDD larger than 137gb, does it support up to a 300 gb?

  • What is the max  os upgrade available for power mac g5 w/powerpc processor

    What is the max one can upgrade the os on a powerpc power mac g5

    Hi, 10.5.8...
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)

  • What is the max resolution for external monitors from the intel hd 4000 graphics driver

    What is the max resolution supported by the intel hd 4000 graphics driver found on the 13in MacBook Pro for EXTERNAL monitors?

    OK so after doing much research... this seems to be the best workflow.
    Bring HDV in to FCP as ProRes 422.
    Edit show... add bells and whistles, etc.
    Export movie as ProRes 422.
    Then for the client - ensure that they have latest version of Quicktime and download the Apple ProRes Quicktime Decoder (for mac or Windows). (It is assumed they have a decent computer to play back on.)
    The client will then be able to play a movie encoded as proRes 422 and all will be happy.
    As a back up a high resolution h264 file can't hurt.
    Thanks for everyones input. We got there in the end.

Maybe you are looking for