What is the maximum amount of hours the iphone 4 can record in 720p?
Also does it just record in 720p or is there some wwhere you can choose to record in hd or not?
Unsure about how many hours it will record.. I found this answer on another website, but it does not really answer exactly.
+"Iphone 4 come in two sizes 16gb and 32gb. I just did a test and the video stopped after 49mn51secs, saying that I had reached the maximum size for the video. And I still have 20 gb left free on the device."+
Back camera automatically records in 720HD. There is no option to switch.
You can however edit the videos in iMovie app and export it at: 360p / 540p or 720p
Message was edited by: RandomPhil86 - More Detail
Similar Messages
-
I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?
Maximum Memory 16 GB (Actual) 8 GB (Apple)
Memory Slots 2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM -
What are the reporting performances can we do?
What are the reporting performances can we do?
Hi,
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particual day > check query execution time.
Try table rsddstats to get the statistics
Using cache memoery will decrease the loading time of the report.
Run reporting agent at night and sending results to email.This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Hope this helps.
Thanks,
JituK -
What is the proper way to record line numbers in Master/Detail records?
Guys and Gals,
Been thinking about this for awhile, but thought it best to ask the people who really know what they are doing.
What is the proper way to record & show line numbers in a Master / Detail record set?
For example, take Master/Detail relationship Orders and OrderItems. Orders has a column Document_Number and OrderItems has Document_Number, Line_Number. Line_Number should contain the row number 1,2,3,4 ... etc. for each row in a document.
Should I ...
<ol><li>Add a sequence and a trigger in the database? The FusionOrderDemo does this, but then the sequence never "resets" and I've got row numbers that keep incrementing. So one document has rows 4,5,6 and the next document has 7,8,9 when they should both have 1,2,3.</li>
<li>Programmatically take care of the row numbers? This seems like I'm asking for trouble. Anytime an insert or delete operation gets done, I'll have to iterate through rows and re-assign row numbers.</li>
<li>Is there a way to assign row numbers in a table iterator (or data collection?) to an entity?</li></ol>
Any suggestions would be appreciated. It's looking like #2 is my only option, but if anyone knows different I'd love the input.
WillThank you both guys.
As John said, I believe I'm looking for a gap-free sequence per master record.
The line number of the OrderItems table is the second half of the primary key. The first half of the primary key (DocumentNumber) is the foreign key to the Orders table.
Think of it like line items on an order or invoice. For example, if you were talking to someone on the phone concerning an invoice, you might say, "The pricing for line item #3 is incorrect." In this case, it's good to have a common reference. Or imagine a Microsoft Excel spreadsheet with no row numbers displayed! You'd never get anywhere if you had to explain something over the phone.
If this is tricky to perform, I take it using a sequence and trigger such as the Fusion Order Demo is the best way to approach the challenge for simplicity's sake?
Will -
Greetings,
What are the entities that can be re-used in different servers, SI App, SI instance? And how?
e.g. can I use a deployed IQStreamable@app1 into app2?
can I use a deployed observable/app1/siInstance1/Server1 into another query/app3/siInstance3/server2?
On the presentation titled "04 – Installing, Deploying and Maintaining the SQL Server 2008 R2 StreamInsight Runtime Engine" with file name SQL10R2UPD05-DECK-04.pptx on ecn.channel9.msdn.com/o9/learn/SQL2008R2TrainingKit/Presentations/SQL10R2UPD05-DECK-04/SQL10R2UPD05-DECK-04.pptx
It is mentioned one of the deployment option is "Deployment: Standalone Server"
and it mention the following:
"Use this option for the following scenarios:
- Metadata objects need to be shared between applications
- Event Types
- Adapter Types
- Query Templates
- A data source registered with the server provides an event stream for another existing application"
Could you please provide good example that explain the above statement?
Cheers, MuhammadFirst, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful. -
I bought my iphone 4s in usa apple store
ihave trouble with my iphone wifi that is gray and cannot connect any wifi network.
i want to support for this issue.
but when i write my serial number to support center i see warning like that. What is the problem ?
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.Nobody here would know. Contact Apple and ask them
-
What is the best way to record a video(not big) for free on a mac w/isight?
What is the best way to record a video(not big) for free on a mac w/isight? I need to just make a short (less than 5 minute, no special effects) video, but I can't figure out any programs that will make this possible for me.
Thanks.Hi Carolyn,
you can use iMovie to record a video for free on a Mac with iSight.
1. Open iMovie HD
2. Choose “Create a new project”
3. Name the project for example “iSight Movie” (first field). In the second field, let the default location “Sequences”, in the third one, video format, choose “iSight”. Push “Create”
4. iMovie window opens, next to the scissors, choose the camera (Camera mode), then iSight. Now you appear on the screen, right?
5. Press “Record with iSight” in the main picture window.
6. Press the same button to stop. Your new clip appears now in the clip panel at the right.
7. You are done!
iMac G5 PPC 2,1 Ghz Mac OS X (10.4.8) -
What is the best way to record a project from the timeline to an external recorder via firewire? Also, who makes a recorder that works with a mac and recordes in realtime? This is possible right?
While theoretically possible, sometimes the camera people disable recording back to tape from the computer due to DRM (digital rights managment) issues. They will allow tape to tape transfers however.
Test your process first is all I can advise.
x -
Hello! This is my first time in this discussion group. The question posed is the subject line itself:
What is the smallest data structure record in a .TXT file record to be recognized as an Apple Address Book "Data Card"?
I'm lazy! As a math instructor with 40+ students per class per semester (pCpS), I would rather not have to create 40 data cards pCpS by hand, only to expunge that info at semester's end. My college's IS department can easily supply me with First name, Last name, and eMail address info, along with a myriad of other fields. I can manipulate those data on my end to create the necessary .TXT file, but I don't know the essential structure of that file.
Can you help me?
Thank you in advance.
BillHello Bill, & welcome aboard!
No idea what pCpS is, sorry.
To import a text file into Address Book, it needs to be a comma delimited .csv file, like...
Customer Name,Company,Address1,Address2,City,State,Zip
Customer 1,Company 1,2233 W Seventh Street,Unit 543,Seattle,WA,99099
Customer 2,Company 2,1 Park Avenue,,New York,NY,10001
Customer 3,Company 3,65 Loma Linda Parkway,,San Jose,CA,94321
Customer 4,Company 4,89988 E 23rd Street,B720,Oakland,CA,99899
Customer 5,Company 5,432 1st Avenue,,Seattle,WA,99876
Customer 6,Company 6,76765 NE 92nd Street,,Seattle,WA,98009
Customer 7,Company 7,8976 Poplar Street,,Coupeville,WA,98976
Customer 8,Company 8,7677 4th Ave North,,Seattle,WA ,89876
Customer 9,Company 9,4556 Fauntleroy Avenue,,West Seattle,WA,98987
Customer 10,Company 10,4 Bell Street,,Cincinnati,OH,89987
Customer 11,Company 11,4001 Beacon Ave North,,Seattle,WA,90887
Customer 12,Company 12,63 Dehli Street,,Noida,India,898877-8879
Customer 13,Company 13,63 Dehli Street,,Noida,India,898877-8879
Customer 14,Company 14,63 Dehli Street,,Noida,India,898877-8879
Customer 15,Company 15,4847 Spirit Lake Drive,,Bellevue,WA,98006
Customer 16,Company 16,444 Clark Avenue,,West Seattle,WA,88989
Customer 17,Company 17,6601 E Stallion,,Scottsdale,AZ,85254
Customer 18,Company 18,801 N 34th Street,,Seattle,WA,98103
Customer 19,Company 19,15925 SE 92nd,,Newcastle,WA,99898
Customer 20,Company 20,3335 NW 220th,2nd Floor,Edmonds,WA,99890
Customer 21,Company 21,444 E Greenway,,Scottsdale,AZ,85654
Customer 22,Company 22,4 Railroad Drive,,Moclips,WA,98988
Customer 23,Company 23,89887 E 64th,,Scottsdale,AZ,87877
Customer 24,Company 24,15620 SE 43rd Street,,Bellevue,WA,98006
Customer 25,Company 25,123 Smalltown,,Redmond,WA,98998
Try Address Book Importer...
http://www.sillybit.com/abee/ -
Please help me..?! My iphone 4 is low battery so i'm charging for 8 hours and i turn on it..But the iphone 4 can't turn on..!! Please help me..!!
Try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data -
What are the tasks we can do with Maintenance Optimizer
What are the tasks we can do with Maintenance Optimizer?
Hi,
All Corrective Packages for SAP NW04 , NW04s and SAP Business suite delivered after 04/02/2007 will only be available via SAP Solution Manager MOPZ
Also it Reduces risk, Increase transparency and Prepared for Future.
Thanks
Vijay Kothapalli -
What is the reason of doing recording in BDC !
What is the reason of doing recording.....CAn we directly write the code ???
Hi,
OKCODE is nothing but the button clicks which you have performed while creating or changing a document.
You will be moving around in the transaction for creating a document and finally you click the save button. When click the save button then you will generally have the OKCODE as '=SICH'.
The OKCODE basically tells you which button you have clicked, as you are having so many options in the transaction to work around.
Thanks,
Mahesh. -
HT201401 What causes the iPhone 4S to shut down to a black screen when it has full power?
What causes the iPhone 4S to shut down to a black screen when it has full power? I have cleared the open icons and it works for one day then shuts down again.
Software hiccup, glitch or maybe faulty battery. Restore iPhone with iTunes on computer. See if this helps. If still problem that you think is serious enough to fix, all iPhone 4S have full Warranty. Make Genius Reservation and take iPhone to Apple for resolution.
-
What is the best way of recording bass
Hi Peeps
What is the best way to record a bass guitar in Logic. I'm going through a Fast Track Pro Audio Interface. The songs we are recording a disco cover, like get down on it and freak out, so need quite a warm rounded tone to them with a solid level.
Thanks
MattHi Peeps
What is the best way to record a bass guitar in Logic. I'm going through a Fast Track Pro Audio Interface. The songs we are recording a disco cover, like get down on it and freak out, so need quite a warm rounded tone to them with a solid level.
Thanks
Matt -
What are the reports we can get from OPM Quality
Dear All,
What are the reports we can get it from OPM Quality module.
I am unable to get any reports abouts Tests, Samples specifications.
Can someone please suggest me.
Regards,
JonPl post details of EBS version.
If 12.1.3, see Chapter 7 of the OPM Quality User Guide - http://download.oracle.com/docs/cd/B53825_08/current/acrobat/121gmdqmug.pdf
The same guide for other versions can be found at http://www.oracle.com/technetwork/documentation/applications-167706.html
HTH
Srini
Maybe you are looking for
-
How do I get my MacBook Pro, iPhone and iPad all in sync with each other?
Just bought an iPad mini. What is best way to sync my iPhone 5, MacBook Pro, and iPad mini?
-
How to interchange the data in a report
I am using Obiee 10g.I build one report in that we having 4 columns like name, sal, job, manager ank, 4000 ,SE, parta mou ,5000, SE, kemp Rafi, 4000, SE, debi parta, 11000, mana, sai kemp, 12000 ,SE, ben now my client requirement like this ( the mana
-
Mkv,avi vlc icon issue in Finder after upgrade Yosemite
After Yosemite upgrade I have a problem with vlc icon in Finder. mkv file don't have vlc icon and show white icon: some avi file show this icon: and other avi file show this icon: I uninstalled and reinstalled vlc but I have not solved the problem...
-
How do i install my hp officejet 6500a printer without disc
how do i install my hp printer officejet 6500a without a disc?
-
Currently I am running a subvi in a subpanel. I want to be able to run the subvi in the subpanel only when I select a boolean control on the front panel. Is this possible? I have attached the main vi. I tried putting the code in a case structure