What is the maximum iLife supported on my ibook g4

Im new to mac so bare with me , i bought a preowned ibook g4 with Os 10.5.8 its the late 2004 model so i assumed iLife 04 was the only compatable iLife but i have iWeb which i read was only introduced after the iLife 05 os i dont know what do , can anyone help? i need to know what the maximum iLife i can install

Hello Dsloan97,
PowerPC iLife requirements:
http://support.apple.com/kb/TA27615
After iLife 09 an intel Mac is required.
Note that different features of iLife have
different requirements such as DVD burner,
1GB RAM, G5 processor, ect.
If you want features available in later iLifes
make sure they work with your system.
I believe your G4 can be upgraded to 1.25 GB
of RAM. You might consider this.
Also, leave 15% available HD space. Your Mac
will run smoother. Also, remember to verify disc
and repair permissions using disc utility before and
after downloads and installs.
Good Luck
A

Similar Messages

Solaris 10 question: What is the maximum memory support at a x64 system?

I am trying to install Solaris 10 U4 at a x64 Intel system. When the OS installation cd boot, it can only recognize up to 32GB memories. After installation with 64GB memories, at the 1st boot, the system will continuously reboot automatically. So I would like to know if Solaris 10 can support 64GB at a x64 system. If yes, then does anyone have any idea how I can counter this problem. If not, then any idea why?
Thanks~
Anthony

Hi,
If you install the faster 800 MHz alongwith the existing, then the faster memory will also default if any of the existing is of a lower speed. That said, 800 MHz will also work just as the 667 MHz with a slight difference.
Good luck !
Hit kudos if I helped.

What is the maximum size of an image height (in pixels) that supports Muse? I noticed that if the photo is too high, reduce the Muses. thanks

What is the maximum size of an image height (in pixels) that supports Muse? I noticed that if the photo is too high, reduce the Muses.
thanks

Thanks for the explanation, it was very helpful
Paolo Guercio
Il giorno 11/nov/2014, alle ore 17:00, Vikas.Sharma <[email protected]> ha scritto:
If you place in Muse - an image with either height or width larger than 2048 pixels - Muse scales the image down proportionately, limiting the larger dimension to 2048.
However, if you want to use the placed image at its original size, you can scale the image up to desired size either by dragging the resizing handles or by entering Height and Width values in the Control Strip on top. After that, go to the Assets panel and locate the image in there, then right click that image in Assets panel and choose "Import Larger Size". That would bring back the lost image information from the original image.
Hope this gives you clarity on what you wanted to know.
Cheers,
Vikas
>

What is the maximum number of ARP entries (IPv4) and ND entries (IPv6) supported in our controllers?

Q: What is the maximum number of ARP entries (IPv4) and ND entries (IPv6) supported in Aruba controllers?
A: The maximum number of static ARP entries supported is about 2048 for M3/72xx/70xx platforms.
The maximum number of static ARP entries supported is about 128 for 6xx platforms.
The maximum number of static ND entries supported is about 2048 for M3/72xx/70xx platforms.
The maximum number of static ND entries supported is about 128 for 6xx platforms.

a)It depends upon software level. b) 16,000 per card, With release 9.3:
60K Connections Support on BXM-E—Provides the ability to support a maximum of 60K per card for VSI applications for the BPX 8600, for example, PNNI or MPLS, used on enhanced BXM-E cards.

I want to upgrade my macbook pro 15-inch i7 2.3GHz memory and I want to know what is the maximum RAM it could take

I want to upgrade my macbook pro 15-inch i7 2.3GHz memory and I want to know what is the maximum RAM it could take

Welcome to Apple Support Communities
It looks like you have got an Early 2011 or newer MacBook Pro, so you can use 16 GB of RAM. You can buy more RAM at OWC or Crucial. Remember that you cannot upgrade RAM in MacBooks Pro with Retina display
In case you have got a Mid 2010 MacBook Pro, you can only install 8 GB of RAM

What is the maximum size for mailbox per user (Exchange 2007)

Hello,
I'd like to know:
What is the maximum size per mailbox, and is it not recommended to exceed 3 GB and about the items how many is the maximum per folder (inbox, .. )
I've Exchange 2007 SP2, Outlook 2007 and 2010.
Thank you.

Hi
There is no size limit on mailboxes up to the maximum size of your database. I normally recommend 2GB mailbox limits if you have some form of archiving in place. If you have no archiving in place then the limit should be set at the amount of
data people need to keep - it is not a good idea for people to store mail in PST files because there is a limit on their mailbox.
See this article for item count recommendations:
http://support.microsoft.com/kb/905803
Also you need to upgrade your Exchange 2007 server to SP3 ... SP2 has been out of support for nearly 3 years already:
Exchange 2007 Support Lifecycle
Steve

What's the maximum # of threads?

Support for asynchronous I/O (in HTTPService and WebService)
kinda implies that the Player has a thread pool that it gets a
spare thread from each time I do a send() on one of these
components. Each allocated thread will block until it gets a
response. If I don't get any responses (perhaps because it's
long-lived) how many threads can I obtain from the pool before the
Player runs out of threads (or is there no maximum or is it a
start-up parameter)?

Anakin1989 wrote:
Hi,
I'm working on a pretty big program and i need a lot of threads to make it run well (it's an audio player and, of course, i don't need people to wait when, for example, they save a playlist). So, i put some of these tasks on different threads, plus others that i didn't need for making the program run faster, but they are there just to make the program run. Now i have at least 4 threads running at the same time and, in some cases, there are even 6 or 7. Is it too much? It's my first big program (it's just for fun but i still want it to run well) and i didn't need so many threads before. What's the maximum number of threads you'd recommend me to have?
Thanks.Are you experiencing any problems with the number of Threads you have? If not, stop worrying. On the other hand, are you sure you need all of them? There are alternatives to Threading, such as SwingWorker and Timer that might be able to help you out.
One thing you better make sure of is that you're not doing any Swing work off of the EDT, or doing things like sleeping or time-consuming work on the EDT.

What's the maximum ram for G4 1Ghz?

Can someone please tell me what's the maximum ram I can install in my PowerBook G4. It currently has 1 Gb Ram.
Thank you.

See:
http://download.info.apple.com/Apple_Support_Area/Manuals/specs/powerbook/L24362 A_EN.pdf
Processor and memory
• 867MHz or 1GHz PowerPC G4 processor with Velocity Engine
• 1MB DDR SRAM level 3 cache • 133MHz system bus • 256MB or 512MB of PC133 SDRAM; two SO-DIMM
slots support up to 1GB
Message was edited by: kennethfromtoronto

What's the maximum size.......

What's the maximum size of an ImageIcon to be supported by a Label???
I'm trying to show a 3.5 Mb image and doesn't show it. But a 1 Mb does....
Can anyone tell me why this happens???

Well maybe you have to set the size of the Label to the size of the Image - use setPreferredSize() to set the size of the label....
otherwise you can do something like this :
//Get the Icon
icon =
new ImageIcon(YourFrame.class.getClassLoader().getResource(
"/images/yourImage"));
//Get he Width of the Label on which the Image is placed
int width = imageLabel.getSize().width;
//Get the height of the label on which the Image is placed
int height = imageLabel.getSize().height;
//Get the Scaled image
Image scaledImage = image.getScaledInstance(width,height,Image.SCALESMOOTH);
//Set the Image of the Icon
icon.setImage(scaledImage);
//Update the Image Label
imageLabel.updateUI();
--j

What is the maximum RAM for 2.16 GHz 24 in DDR2 iMac Early 2006

What is the maximum RAM that I can install on iMac 24 in 2.16 GHz DDR2 Early 2006 model?

Is this your Mac:
http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.16-24-inch-sp ecs.html
I had the same model: officially it'll support 3 GB RAM; some people added 4 GB and it ran fine, but it will only address about 3.2 GB. I decided that wasn't worth it and made do with 3 GB.

What is the maximum resolution of the display port on the X200s dock?

I would like to purchase a new ultraportable and monitor for my home office. A 30 inch screen is in my price range, but not all devices support such a high resolution.
What is the maximum resolution that the dock which connects to the X200s can output?
Thanks in advance!

Thank you. Now I can look for nice LCD model. Regards, Krecony

What is the maximum number of columns available in Numbers 3.1?

What is the maximum number of columns available in Numbers 3.1? (I don't seem to be able to get past Column IU. Is that just how it is?)

DBacs wrote:
Aha! Just after posting this, the Support Community website suggested "More Like This", and I discovered the answer: 256 columns. (I don't suppose I get Genius Points for answering my own question, do I...?)
No

What is the maximum capacity of memory card suppor...

Hi Friends!
Please can any one tell me What is the maximum capacity of memory card supported by 6233???

coolbelief wrote:
jimmy is right, it can handle up to 16GB.
http://europe.nokia.com/find-products/devices/nokia-6720-classic/specifications
yes but in Greek site it says it can take up to 8GB memory card . weird...
If you want to thank someone, just click on the blue star at the bottom of their post

What is the maximum number of physical link we can bind to a ether-channel and port-channel

Hi,
I was studying about port-channel & ether-channel and found that, it can be bind up-to 8 ports. So maximum number, we can have of 8 ports or more ?
For binding we should have minimum of 2 ports or 1 ports will work ? For load-balancing purpose, is the port no. would be in a bundle of 2,4 and 8 ?
Thanks

Hi Kathik,
I have gone through one document. It's saying the below mentioned things :
Jun 7, 2012 9:36 PM (in response to Sarabjit)
Re: What is the maximum number of etherchannels we can have?
The maximum number of Etherchannels varies from platform to platform. The maximum number of ports in an etherchannel is either 8 ro 16 depending on the platform. The minimum number of ports in an etherchannel bundle is 1.
Jun 8, 2012 1:27 AM (in response to Sarabjit)
Re: What is the maximum number of etherchannels we can have?
Etherchannels is a Cisco term. Other vendors call them 802.3ad trunks. It's common to see something like this in datasheets:
48 ports 10/100/1000 Mbit/s
802.3ad:
Maximum of 32 groups
Maximum of 8 ports per group
The document url is https://learningnetwork.cisco.com/thread/43680
The another document says the below mentioned things :
Matrix of Load Balancing Methods
This matrix consolidates the load balancing methods that this document describes:
Platform
Address Used in XOR
Source-Based?
Destination-Based?
Source-Destination-Based?
Load Balancing Method—Configurable/Fixed?
6500/6000
Layer 2, Layer 3 addresses, Layer 4 information, or MPLS information2
Yes
Yes
Yes
Configurable
5500/5000
Layer 2 address only
Yes
Cannot change the method
4500/4000
Layer 2, Layer 3 addresses, or Layer 4 information
Yes
Yes
Yes
Configurable
2900XL/3500XL
Layer 2 address only
Yes
Yes
Configurable
3750/3560
Layer 2 or Layer 3 address only
Yes
Yes
Yes
Configurable
2950/2955/3550
Layer 2 address only1
Yes
Yes
—1
Configurable
1900/2820
These platforms use a special method of load balancing. See theCatalyst 1900/2820 section for details.
8500
Layer 3 address only
Yes
Cannot change the method
1 For the 3550 series switch, when source-MAC address forwarding is used, load distribution based on the source and destination IP address is also enabled for routed IP traffic. All routed IP traffic chooses a port based on the source and destination IP address.
2 For the 6500 series switches that run Cisco IOS, MPLS layer 2 information can also be used for load balancing MPLS packets.
The document url is http://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/12023-4.html
Another document says the below mentioned things for load-balancing :
inally, here is full list of valid load-distribution methods:
•dst-ip—Load distribution on the destination IP address
•dst-mac—Load distribution on the destination MAC address
•dst-port—Load distribution on the destination TCP/UDP port
•src-dst-ip—Load distribution on the source XOR destination IP address
•src-dst-mac—Load distribution on the source XOR destination MAC address
•src-dst-port—Load distribution on the source XOR destination TCP/UDP port
•src-ip—Load distribution on the source IP address
•src-mac—Load distribution on the source MAC address
•src-port—Load distribution on the source port
The document url is https://learningnetwork.cisco.com/thread/63064
Please suggest.

When i create my own 3D Lut what is the maximum mesh size Photoshop CS6 can read?

when i create my own 3D Lut what is the maximum mesh size Photoshop CS6 can read?

Photoshop should support up to 256x256x256 - but I don't recommend creating LUTs that big.

What is the maximum iLife supported on my ibook g4

Similar Messages

Maybe you are looking for