What is the maximum number of Call Types, Skill Groups and Campaigns created in ICM 8.0.1 and 8.0.3

Hi All,
What is the maximum number of Call Types, Skill Groups and Campaigns created in ICM 8.0.1 and 8.0.3?
In which the above requested information will be available??

Oh I see. So I guess what you are saying is that is
Director's way of compressing vector numbers. Also, as to what you
were saying about the number 3000 is sure not the limit for vector
units, I think I was just jumping the gun considering that I only
glanced at the script error, and then clicked on the debug button
to see where the error happened. Then once I looked at the varibles
in the varible window, I saw these weird numbers with the e3 at the
end of them, and I just thought that it could not add the vectors
together with the e3 at the end of each vector unit. However, to
make a long story short, I detached the script and reattached it
which did no create the error again, and I learned that Director
can add vector units together that have an e3 at the end of each
vector unit. So thanks for clarifying what the e3 means.

Similar Messages

  • What is the maximum number of contacts in a group that will send in an iCloud email? I'm sending from MacBookPro.

    What is the maximum number of contacts in a group that will send in an iCloud email? I'm sending from MacBookPro.

    Limits on Sending Messages  
    iCloud has several safeguards to ensure that only iCloud members can send messages using the iCloud outgoing mail server. Among these safeguards are reasonable limitations on:
    The total number of messages you can send each day (200 messages)
    The number of recipients to whom you can send each day (1000 recipients)
    The maximum number of recipients per message (100 recipients)
    The size of incoming and outgoing messages (20 MB)
    You can send 10 emails to 100 people each in a day, for example, or 198 messages with, on average, 5 recipients (and five ninety-ninths).

  • What is the maximum number of characters in an Oracle 10G Instance Name

    All,
    Can I know what is the maximum number of characters in an oracle 10g instance name under AIX? Is it 7 characters or 8 characters?
    regards
    Santhosh

    One should really make the difference between db_name and instance_name: if instance_name default value is db_name it can be different
    (even on a non RAC database).
    For example with Oracle 10.2.0.4 you can create a database named DB78 with instance_name=DB12345678:
    $ uname -a
    Linux lx01.localdomain 2.6.18-92.el5 #1 SMP Fri May 23 22:17:30 EDT 2008 i686 i686 i386 GNU/Linux
    $ ps -fu oracle | grep smon
    oracle    6353     1  0 20:30 ?        00:00:01 ora_smon_DB12345678
    oracle    6412  5596  0 20:37 pts/1    00:00:00 grep smon
    $ export ORACLE_SID=DB12345678
    $ sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 8 20:34:26 2010
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> show parameter name
    NAME                                 TYPE        VALUE
    db_file_name_convert                 string
    db_name                              string      DB78
    db_unique_name                       string      DB78
    global_names                         boolean     FALSE
    instance_name                        string      DB12345678
    lock_name_space                      string
    log_file_name_convert                string
    service_names                        string      DB78I would not recommend this practice: but it's interesting to know to avoid confusing between db_name and instance_name.

  • What is the maximum number of builds in Keynote version 6.2?

    What is the maximum number of builds in Keynote version 6.2? If there are any...
    I'm up to 800 builds and seems to be working great. I'd like to keep adding builds and want to know if anyone has stumbled across a limit and started to have issues.
    Thanks!

    Hi Wayne - you have been very helpful; thank you.
    I work at a film / tv post production facility.  We use Outlook365 and the Sharepoint feature to share Word Docs and Excel Spreadsheets virtually.  I use the Excel functionality in Sharepoint so that we can track media we copy to our StorNext SAN volumes as well as the multiple LTFS and Tar Per Shot LTO5s we write for both our clients and as internal data backups.  Managing the media is beyond critical as TV and Feature studios require the utmost care of their OCF (original camera footage) and dailies / editorial media.
    Of the many toolsets we use to edit and color shows and feature films is the AutoDesk platform (think Flame, Inferno, Smoke).  The application toolset writes over 20TBs of data to our SAN volumes and the way it writes the data is unique to the application. If you tried to look at via a Mac Finder or Windows Explorer, the hex values in the filenames would not make sense. We cannot associate those hex names with actual human readable project names.
    One of my engineers used the AutoDesk app to spit out a 1 million line plus text file with human readable names of every project, file type and file path.
    What I am trying to do is suck all of that data into a spreadsheet that I can upload to Sharepoint (or paste directly into Sharepoint).  When I try to copy/paste on my Mac Mini directly into a Sharepoint page, both Safari and Firefox go into a spinning beach ball of death.  Time stops; photons of light are bent towards the event horizon; you get the picture.
    Since Numbers won't accept more than 65,000 lines, I need a way to get that data into a spreadsheet.
    I have downloaded LibreOffice and will give that a try. 
    Knowing what you do now, might you have any other suggestions?
    Thank you again.
    Scott

  • What is the maximum number of columns allowed on a table?

    What is the maximum number of columns that a table can have? I have a research team that wants to have 140,000 columns on one table and 2000 rows.
    What would be the best way to input (SQL*Loader?) that data on this table and retrieve data from this table? The highest number of columns that I have implemented on a table was 500.
    Any feedback would be greatly appreciated.
    Thanks. ;-)

    Holy cow 140,000 columns and 2000 rows!! I think you are going to have to tell someone to come up with a better design because that doesn't sound like a relational table. Besides, I found this in the Oracle 8.1.7 Reference Manual:
    "The absolute maximum number of columns in a table is 1000. However, when you create an object table (or a relational table with columns of object, nested table, varray, or REF type), Oracle maps the columns of the user-defined types to relational columns, creating in effect "hidden columns" that count toward the 1000-column limit. For details on how Oracle calculates the total number of columns in such a table, please refer to Oracle8i Administrator's Guide."

  • What is the maximum number of physical link we can bind to a ether-channel and port-channel

    Hi,
    I was studying about port-channel & ether-channel and found that, it can be bind up-to 8 ports. So maximum number, we can have of 8 ports or more ? 
    For binding we should have minimum of 2 ports or 1 ports will work ? For load-balancing purpose, is the port no. would be in a bundle of 2,4 and 8 ?
    Thanks

    Hi Kathik,
    I have gone through one document. It's saying the below mentioned things :
    Jun 7, 2012 9:36 PM (in response to Sarabjit)
    Re: What is the maximum number of etherchannels we can have?
    The maximum number of Etherchannels varies from platform to platform. The maximum number of ports in an etherchannel is either 8 ro 16 depending on the platform. The minimum number of ports in an etherchannel bundle is 1.
    Jun 8, 2012 1:27 AM (in response to Sarabjit)
    Re: What is the maximum number of etherchannels we can have?
    Etherchannels is a Cisco term. Other vendors call them 802.3ad trunks. It's common to see something like this in datasheets:
    48 ports 10/100/1000 Mbit/s
    802.3ad:
    Maximum of 32 groups
    Maximum of 8 ports per group
    The document url is https://learningnetwork.cisco.com/thread/43680
    The another document says the below mentioned things :
    Matrix of Load Balancing Methods
    This matrix consolidates the load balancing methods that this document describes:
    Platform
    Address Used in XOR
    Source-Based?
    Destination-Based?
    Source-Destination-Based?
    Load Balancing Method—Configurable/Fixed?
    6500/6000
    Layer 2, Layer 3 addresses, Layer 4 information, or MPLS information2
    Yes
    Yes
    Yes
    Configurable
    5500/5000
    Layer 2 address only
    Yes
    Cannot change the method
    4500/4000
    Layer 2, Layer 3 addresses, or Layer 4 information
    Yes
    Yes
    Yes
    Configurable
    2900XL/3500XL
    Layer 2 address only
    Yes
    Yes
    Configurable
    3750/3560
    Layer 2 or Layer 3 address only
    Yes
    Yes
    Yes
    Configurable
    2950/2955/3550
    Layer 2 address only1
    Yes
    Yes
    —1
    Configurable
    1900/2820
    These platforms use a special method of load balancing. See theCatalyst 1900/2820 section for details.
    8500
    Layer 3 address only
    Yes
    Cannot change the method
    1 For the 3550 series switch, when source-MAC address forwarding is used, load distribution based on the source and destination IP address is also enabled for routed IP traffic. All routed IP traffic chooses a port based on the source and destination IP address.
    2 For the 6500 series switches that run Cisco IOS, MPLS layer 2 information can also be used for load balancing MPLS packets.
    The document url is http://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/12023-4.html
    Another document says the below mentioned things for load-balancing :
    inally, here is full list of valid load-distribution methods:
    •dst-ip—Load distribution on the destination IP address
    •dst-mac—Load distribution on the destination MAC address
    •dst-port—Load distribution on the destination TCP/UDP port
    •src-dst-ip—Load distribution on the source XOR destination IP address
    •src-dst-mac—Load distribution on the source XOR destination MAC address
    •src-dst-port—Load distribution on the source XOR destination TCP/UDP port
    •src-ip—Load distribution on the source IP address
    •src-mac—Load distribution on the source MAC address
    •src-port—Load distribution on the source port
    The document url is https://learningnetwork.cisco.com/thread/63064
    Please suggest.

  • What's the maximum number of Apple TVs that can be displayed in the AirPlay list?

    We have 50 conference rooms all on the same network and are considering equiping each one with an Apple TV for AirPlay Mirroring our iPad 2s to the rooms projector, or TV. What is the maximum number of Apple TVs that can be displayed in the AirPlay menu to select the correct Apple TV for the conference room being used?

    From what you're saying it sounds as though you wouldn't want to Airplay to all AppleTVs at once, just identify them when that specific room in use?
    This is one of those uncharted territories wheer most domestic users will not require such a set up - Apple provide no official info about this, but they'd be your best source to ask.
    AC

  • I can't change the maximum number of calls and busy in 8941

    Hi Experts,
    I have 8941 model with Camera and I can't make a second call, I tried to change the maximum number of calls, but I couldn't change it's 3 just by default,
    Is there any way to solve this issue?
    Thanks
    Mohammad Saeed 

    Hi Mohammad,
    A firmware or cucm upgrade is required as per the following
    https://supportforums.cisco.com/document/97916/sccp89459-2-2qedinstallpdf
    HTH
    Manish

  • What is the maximum number of columns that can be displayed by sqlplus?

    Hello,
    Questions:
    Is there a limit on what sqlplus can display?
    What is the maximum number of columns that can be displayed by sqlplus?
    I cannot find anything on this in my search. I checked the limits page:
    http://docs.oracle.com/cd/B19306_01/server.102/b14357/apa.htm#sthref3658
    http://docs.oracle.com/cd/E11882_01/server.112/e16604/apa.htm#i635278
    It does not specify any column limits; however, I'm thinking it is tied to LINESIZE which is system dependent.
    Please confirm if true.
    Thanks!

    Received answer directly from SQL*Plus Development:
    "sqlplus does not have a limit on the number of columns it displays."
    They created a table with more than 256 columns with data and had no problem retrieving the data.

  • TS1503 what is the maximum number of pictures I can store and keep on my iPhone 3G?

    What is the maximum number of pictures I can store (and keep indefinitely) on my iPhone 3GS (8GB)?

    It is a balancing act between your photos and everything else you have on the device (apps, mail, messages, etc.), so there is no specific "number" we can give you. Just keep track of your available memory, and make sure you back up your photos regularly so if you reach the maximum memory capacity, you can delete the oldest ones without worrying that they are not saved somewhere else:
    IMPORTING PHOTOS - WINDOWS/MAC
    Cheers,
    GB

  • IN cluse: what is the maximum number of values that can use in "in" caluse?

    Hi All,
    Please see the following querry
    select * from <table> where <columnname> in (value1,value2,....);
    My question is what is the maximum number of values we can put inside the bracket in the querry?
    I mean what is the maximum number of values that can use in "in" caluse.
    Best Reagrds
    Marcelo

    http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14200/expressions014.htm
    A comma-delimited list of expressions can contain no more than 1000 expressions. A comma-delimited list of sets of expressions can contain any number of sets, but each set can contain no more than 1000 expressions.
    The following are some valid expression lists in conditions:
    (10, 20, 40)
    ('SCOTT', 'BLAKE', 'TAYLOR')
    ( ('Guy', 'Himuro', 'GHIMURO'),('Karen', 'Colmenares', 'KCOLMENA') )

  • What is the maximum number of Active Connection in SSG 7206VXR?

    Hi,
    What is the maximum number of SSG Host or active connection (show ssg service package) for Cisco 7206VXR which running with NPE-G1? The SSG is deploying with Web-login and the TCP-Redirect, Port-bundle and Pass-through is enabling. The SSG is to handling IP session authentication. The SSG is binding Gigabit Ethernet.
    The current version of IOS is show as below.
    Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 12.4(9)T1, RELEASE SOFTWARE (fc2)
    Thanks,
    Chia

    To set the maximum number of services per user, use the ssg maxservice command in global configuration mode. To reset the maximum number of services per user to the default, use the no form of this command. ssg maxservice number and no ssg maxservice
    If you want to know more please click following URL:
    http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_command_reference_chapter09186a008017cf59.html

  • . What is the maximum number of levels available in SAP?

    What is the maximum number of levels available in SAP?
    thanx in advanc
    regards,
    rajesh

    this is the question i got from the net for interview preparaton.
    i tried a lot to find out the answer, but still it is pending.
    pls. help me in this.
    regards,
    rajesh

  • What is the maximum number of columns available in Numbers 3.1?

    What is the maximum number of columns available in Numbers 3.1? (I don't seem to be able to get past Column IU. Is that just how it is?)

    DBacs wrote:
    Aha! Just after posting this, the Support Community website suggested "More Like This", and I discovered the answer: 256 columns.  (I don't suppose I get Genius Points for answering my own question, do I...?)
    No

  • What is the maximum number of photos in a iphoto book?

    What is the maximum number of photos in an iphoto book?

    Depends on the theme and the page layouts you - choose - a book has a maximum of 100 pages and as far as I have seen the most photos on a page is 16 - so 1600 would be the Max if you used 100 pages of 16 photos each
    for an overview of page layouts for iPhoto '09 (all are still valid in iPhoto '11 - with some more added) see Liz Castro's web site - http://www.iphotobookthemes.com/pmwiki.php?n=Main.HomePage
    LN

Maybe you are looking for

  • IMac as Dumb Monitor

    I have an iMac 20/2.1G5 Power PC with a bad logic board. Due to the repair costs it is not an economical fix. I would however like to be able to make use of the unit's beautiful monitor and was wondering if anyone out there might have some insights o

  • Creating a dynamic sql statement

    hi, I am having a query select w.id, w.cr_dt, w.cc_cor_addr_id, w.cc_cee_addr_id, w.ttl_pkgs, w.chrg_wt, wf.wb_bkg_chgd_amt + wf.wb_bkg_chgd_amt_st from ops_waybl_fin wf, ops_waybl w where wf.id = w.id and cre_bill_batch_dtls_id in (select get_bill_b

  • Suggest manufacturing scenario Discrete / Repetitve  for Iron & Steel indus

    Which scenario u will suggest for Iron & Steel industry & why? Product - Galvanised Plain/ Galvanised Corrugated Sheets Process- Pickling-Cold Rolling -Galavanizing- Cutting /Corrugation but the product is varying in THK & Width so how u can go for r

  • Where's the other 3/5 of my swap space?!

    Right now, I have a 5 GB swap partition. But my system only sees 2 GB of swap space - I have 3 gigs of space being used for nothing! Where'd my swap space go?

  • Collection of NLS papers

    (possibly from Metalink) http://www.fors.com/orasupp/rdbms/nls/index.htm null