What is the maximum number of files that Finder can display in a directory?

When displaying systems in an Active Directory domain, Finder only displays some of the systems.
I presume that Finder is treating the list of SMB/CIFS systems as if they were entries in a file directory. The number of systems that should appear in the list is around 10,000 but only about half of these are displayed in Finder.
Is there a way to increase the number of systems displayed in Finder?

Yes, I am working with a Windows Active Directory domain.
When using Finder>Network> to display systems in an Active Directory domain, it fails to display all of the systems. Is there a Finder limitation that causes this?
When the system was originally brought online, only the local systems that were members of the Active Directory domain were displayed. Over time, the number of systems that have been "discovered" has increased. The entries are maintained in ascending alphabetical order. Currently, only systems with names beginnig with A through M are listed.
This creates a bit of a problem for our Technical Publications group as all of the systems in our facility start with the letter T.
Does Finder have a limit on how many entries that it can display for a given directory?
Is the list of Active Directory systems being maintained in memory and, hence, limited by memory resources?
Is there a way to filter the list?

Similar Messages

What is the maximum number of columns that can be displayed by sqlplus?

Hello,
Questions:
Is there a limit on what sqlplus can display?
What is the maximum number of columns that can be displayed by sqlplus?
I cannot find anything on this in my search. I checked the limits page:
http://docs.oracle.com/cd/B19306_01/server.102/b14357/apa.htm#sthref3658
http://docs.oracle.com/cd/E11882_01/server.112/e16604/apa.htm#i635278
It does not specify any column limits; however, I'm thinking it is tied to LINESIZE which is system dependent.
Please confirm if true.
Thanks!

Received answer directly from SQL*Plus Development:
"sqlplus does not have a limit on the number of columns it displays."
They created a table with more than 256 columns with data and had no problem retrieving the data.

IN cluse: what is the maximum number of values that can use in "in" caluse?

Hi All,
Please see the following querry
select * from <table> where <columnname> in (value1,value2,....);
My question is what is the maximum number of values we can put inside the bracket in the querry?
I mean what is the maximum number of values that can use in "in" caluse.
Best Reagrds
Marcelo

http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14200/expressions014.htm
A comma-delimited list of expressions can contain no more than 1000 expressions. A comma-delimited list of sets of expressions can contain any number of sets, but each set can contain no more than 1000 expressions.
The following are some valid expression lists in conditions:
(10, 20, 40)
('SCOTT', 'BLAKE', 'TAYLOR')
( ('Guy', 'Himuro', 'GHIMURO'),('Karen', 'Colmenares', 'KCOLMENA') )

What is the maximum number of users that can be simultaneously connected to a shared drive on an Airport Extreme

What is the maximum number of users that can be simultaneously connected to a shared drive on an Airport Extreme?

50
I haven't tried this, but imagine that things are going to be quite slow.

What is the maximum number of devices that can be connected with FaceTime?

I have tried to find in theh Apple web pages the maximum number of devices that one can connect to with FaceTime. Specifically, how many iPad2 or iPad (new) devices can connect to each other with FaceTime? What about an older iMac running Mountain Lion with iPads? Or, iPhone4s and iPads? Thanks for any information you can provide.

I don't know of any limit, as long as each device has its own individual identification ( e-mail address, or phone number for iphones)

What is the maximum number of addresses that can be sent in a group mailing

Can anyone tell me the maximum number of addresses that can be sent as a group mailing?
Thanks.

"Does Mail complain when you try to send a message to several recipients at once? You might be surprised to know that Mail actually has no limit on the number of recipients to whom you can send a message! So, what's going on here?
Chances are it's your Internet Service Provider (ISP) that's preventing your message from being sent. Your ISP might do this, for example, to deter folks who send unsolicited bulk commercial email (such as "spam" or "Junk mail") to a large number of addresses.
If this happens to you, contact your ISP and ask them if they enforce a limit on how many recipients each email message can have. If there is a limit, you can either send your message to fewer people, or divide your recipient list into multiple sets and send the same message in batches (each time to a different set of recipients). "
Brilliant! Thanks.

What is the maximum number of physical link we can bind to a ether-channel and port-channel

Hi,
I was studying about port-channel & ether-channel and found that, it can be bind up-to 8 ports. So maximum number, we can have of 8 ports or more ?
For binding we should have minimum of 2 ports or 1 ports will work ? For load-balancing purpose, is the port no. would be in a bundle of 2,4 and 8 ?
Thanks

Hi Kathik,
I have gone through one document. It's saying the below mentioned things :
Jun 7, 2012 9:36 PM (in response to Sarabjit)
Re: What is the maximum number of etherchannels we can have?
The maximum number of Etherchannels varies from platform to platform. The maximum number of ports in an etherchannel is either 8 ro 16 depending on the platform. The minimum number of ports in an etherchannel bundle is 1.
Jun 8, 2012 1:27 AM (in response to Sarabjit)
Re: What is the maximum number of etherchannels we can have?
Etherchannels is a Cisco term. Other vendors call them 802.3ad trunks. It's common to see something like this in datasheets:
48 ports 10/100/1000 Mbit/s
802.3ad:
Maximum of 32 groups
Maximum of 8 ports per group
The document url is https://learningnetwork.cisco.com/thread/43680
The another document says the below mentioned things :
Matrix of Load Balancing Methods
This matrix consolidates the load balancing methods that this document describes:
Platform
Address Used in XOR
Source-Based?
Destination-Based?
Source-Destination-Based?
Load Balancing Method—Configurable/Fixed?
6500/6000
Layer 2, Layer 3 addresses, Layer 4 information, or MPLS information2
Yes
Yes
Yes
Configurable
5500/5000
Layer 2 address only
Yes
Cannot change the method
4500/4000
Layer 2, Layer 3 addresses, or Layer 4 information
Yes
Yes
Yes
Configurable
2900XL/3500XL
Layer 2 address only
Yes
Yes
Configurable
3750/3560
Layer 2 or Layer 3 address only
Yes
Yes
Yes
Configurable
2950/2955/3550
Layer 2 address only1
Yes
Yes
—1
Configurable
1900/2820
These platforms use a special method of load balancing. See theCatalyst 1900/2820 section for details.
8500
Layer 3 address only
Yes
Cannot change the method
1 For the 3550 series switch, when source-MAC address forwarding is used, load distribution based on the source and destination IP address is also enabled for routed IP traffic. All routed IP traffic chooses a port based on the source and destination IP address.
2 For the 6500 series switches that run Cisco IOS, MPLS layer 2 information can also be used for load balancing MPLS packets.
The document url is http://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/12023-4.html
Another document says the below mentioned things for load-balancing :
inally, here is full list of valid load-distribution methods:
•dst-ip—Load distribution on the destination IP address
•dst-mac—Load distribution on the destination MAC address
•dst-port—Load distribution on the destination TCP/UDP port
•src-dst-ip—Load distribution on the source XOR destination IP address
•src-dst-mac—Load distribution on the source XOR destination MAC address
•src-dst-port—Load distribution on the source XOR destination TCP/UDP port
•src-ip—Load distribution on the source IP address
•src-mac—Load distribution on the source MAC address
•src-port—Load distribution on the source port
The document url is https://learningnetwork.cisco.com/thread/63064
Please suggest.

What is the maximum number of line items we can enter in an order...

Hi,
Can anyone explain what is the max number of line items that v can enter in an order....
or if i want to increase the number of line items than the max where it is controlled.
Because my mm counter part is facing this in the PO he could make only 9999,the problem is when posting...the accounting document is not getting generated bcas of exceeding the limit.
venugopal

hi,
this is my personal experiance that we can enter at the most 499 line items in SALES ORDER.
This is because for every line item there will be 2 financial entries, debit and credit. and 1 FI document can have at the most 999 line items (which we can not increase without KEY fromSAP)
If we divide 999 by 2 then it comes to 499.50 so you can enter at the most 499 line items in Sales order.
Regards
Vishal

What is the maximum number of images that can be imported into flash?

I am not able to import images more than 47 or 48. What is the max. images imported?
As the images are sequence images and I need that to use for interactivity for rotation with Action script. So cudn't import as a swf either.
Please do let me know.
Thanks in advance.

You can load the image files into your movie's Library during authoring, or, you can import the image files into your movie at runtime. Either way, your're still using the same memory.
If your movie is designed so that the user will only ever use some of the images, then it may be better to load the files that the user selects at runtime.
In either case, you should optimize the images that you use as much as possible so that you are using the smallest possible file size and still keep the greatest image quality possible.

What is the maximum number of samples that can be acquired with a single trigger using PCI-6036E DAQ card?

1. My PCI-6036E card has a FIFO of 1024 bytes in AI. Maximum how many samples can be acquired with single trigger for digitizing a waveform?
2. PCI-6036E DAQ card has got a AO with 10ks/s update rate? Can I generate a pulsed output with the AO of this card? I need a pulse of, say, 5 V and 1 kHz frequency.

Giri,
1.The trigger is usually for enabling the acquisition. I mean, when it is logic zero, you acquire nothing; however, when it is logic one, you start acquiring your waveform,and you can acquire continuously without having to worry about how many samples, unless you want to set your program for doing so. You can acquire continuously by implementing buffer acquisition. Finally, the FIFO that is in the board will not affect the buffer acquisition.
2.Yes, you can do that! You can generate your 5V signal with that specific frequency, and you should not have any problems, because the freq fits in the update rate.
I hope this information is helpful.
L Aguila
Applications Engineer
National Instruments

What is the maximum number of devices that can be added to an ePrint Center Account?

How many printer can be in one account?

Rachels,
I have an account that has had 10 printers on one account, but I am looking into if there is a limit and if i find out I will post it.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

What is the maximum number of devices that can be added to a icloud account? ie Does 'Find my iphone' have a max number of devices?

I have over 50 iphone logged in with the same compant account to keep track of them, some of them are not showing anymore, including new devices, have I maxed out the ammount of devices I can associate with this feature?

The answer to this question is 100.
You can have 100 devices on a single iCloud account.

What is the maximum number of emails that can be sent at 1 time?

We are a business and need to send several thousand emails at one time. Can we do this or are we limited to 100 per hour, 500 per day, for example/

Thunderbird is email client software that runs on YOUR computer. It has nothing to do with limits or quotas. If there are any limits they would be set by your email provider. I suggest that you ask them.

What is the maximum number of devices that can be linked to the same cloud?

Hi,
How many devices can be linked to the same icloud account? Is there a max?
Thanks.

The answer to this question is 100.
You can have 100 devices on a single iCloud account.

What is the max number of contacts that can be added to an email?

I'm sometimes sent emails with 1-200 contacts added in. If I try to 'respond to all' iMail just won't send the email back.
What is the maximum number of contacts that iMail can cope with? Is there a workaround for a larger number?
Many thanks
Steve

I'm not sure the point of it as I use a BT push pop3 account?
The point is that these kinds of restrictions are set by your email provider, i.e., Comcast, GMail, etc., not by the Mail application client.
If BT means British Telecom, ask them.

What is the maximum number of files that Finder can display in a directory?

Similar Messages

Maybe you are looking for