What is the maximum number of matching entires that can be included in a filter ?

I have created a message filter for "junk".
I seem to have added one too many entries and now it does not filter any new "junk" entries.
I have deleted some of the new entries and added them again, only to find they are not filtered.

You may be right about CLI vs GUI differences...
Call me a geek - but I wanted to see what would happen when my system hit the limit. So I saved all open documents, used a loop to create 40 passwordless accounts, then set up a login item so that on login, FUS would be invoked to log in to the next sequential uid.
When I came back (some time later), the system was logged in to the 40th user, and with a few exceptions, things seemed to be working ok...
The most obvious problem was that SystemUIServer was crashed in most of the users. I'm not sure when that started, but at some point after so many logins, it wasn't possible to launch the SystemUIServer, meaning no FUS menu (among other things). Other programmes launched and worked ok, though a bit sluggish (I had 7 swap files at that point, where it is rare for me to have more than two). But "Terminal.app" worked fine, and FUS was possible via command line so that wasn't a big problem, and the few other accounts I switched over to check were in a similar state.
The "Accounts" pref pane seems to be limited to showing 42 accounts (I had several accounts prior to creating the 40 test accounts), but the FUS menu (viewed from an account where SystemUIServer hadn't crashed) showed them all. I forgot to check the "Login Window".
Of course, there may be other things that don't work under these conditions that I didn't stumble across, but depending on whether or not SystemUIServer is required, and probably load and RAM availability, it looks like it is possible to squeeze at least 40 logins at once on a system.
And again, this obviously isn't "official" in any way.

Similar Messages

  • What's the maximum number of Apple TVs that can be displayed in the AirPlay list?

    We have 50 conference rooms all on the same network and are considering equiping each one with an Apple TV for AirPlay Mirroring our iPad 2s to the rooms projector, or TV. What is the maximum number of Apple TVs that can be displayed in the AirPlay menu to select the correct Apple TV for the conference room being used?

    From what you're saying it sounds as though you wouldn't want to Airplay to all AppleTVs at once, just identify them when that specific room in use?
    This is one of those uncharted territories wheer most domestic users will not require such a set up - Apple provide no official info about this, but they'd be your best source to ask.
    AC

  • What is the maximum number of user accounts that can be logged in at once?

    How many users can be logged in at once, using Fast User Switching (FUS)?
    Ideally, I'd like an "official" answer from Apple, or if someone can refer me to "official" Apple documentation that answers this question, that would be fine.
    I think the answer is 10 but need to know for sure.
    Thanks in advance!
      Mac OS X (10.4.9)  

    You may be right about CLI vs GUI differences...
    Call me a geek - but I wanted to see what would happen when my system hit the limit. So I saved all open documents, used a loop to create 40 passwordless accounts, then set up a login item so that on login, FUS would be invoked to log in to the next sequential uid.
    When I came back (some time later), the system was logged in to the 40th user, and with a few exceptions, things seemed to be working ok...
    The most obvious problem was that SystemUIServer was crashed in most of the users. I'm not sure when that started, but at some point after so many logins, it wasn't possible to launch the SystemUIServer, meaning no FUS menu (among other things). Other programmes launched and worked ok, though a bit sluggish (I had 7 swap files at that point, where it is rare for me to have more than two). But "Terminal.app" worked fine, and FUS was possible via command line so that wasn't a big problem, and the few other accounts I switched over to check were in a similar state.
    The "Accounts" pref pane seems to be limited to showing 42 accounts (I had several accounts prior to creating the 40 test accounts), but the FUS menu (viewed from an account where SystemUIServer hadn't crashed) showed them all. I forgot to check the "Login Window".
    Of course, there may be other things that don't work under these conditions that I didn't stumble across, but depending on whether or not SystemUIServer is required, and probably load and RAM availability, it looks like it is possible to squeeze at least 40 logins at once on a system.
    And again, this obviously isn't "official" in any way.

  • What is the maximum size of a jpg that can be imported into iPhoto?

    what is the maximum size of a jpg that can be imported into iPhoto

    I've imported and worked on Photoshop and tiff files up at 220 MB (8400 x 6600 pixels) in size.  It does take some time to do any edits, up to 7 seconds for some.   220 MB is a big file but iPhoto handles it OK.
    I do have a top of the line iMac with SSD drive so it's pretty fast.  Other Macs may be slower depending on their configuration.
    OT

  • The maximum number of data files that can be accessed on the ORACLE DB is r

    Hello Gurus,
    We are facing problem in our BW production server
    The maximum number of data files that can be accessed on the ORACLE DB is reached
    Error Message :
    ORA-00059: maximum number of DB_FILES exceeded
    We have search a SAP Note regarding this error but this is for oracle - 8i, we want to solve this problem in Oracle - 10g
    Thanks & Regards
    Shishir
    Vital Information
    Database - ORACLE - 10.2.0.2.0
    O/S - AIX - 5.3
    SAP - BIW ( 700 )

    Hi,
    check Data transfer from one BW system to another
    regards,
    kaushal

  • What is the maximum number of physical link we can bind to a ether-channel and port-channel

    Hi,
    I was studying about port-channel & ether-channel and found that, it can be bind up-to 8 ports. So maximum number, we can have of 8 ports or more ? 
    For binding we should have minimum of 2 ports or 1 ports will work ? For load-balancing purpose, is the port no. would be in a bundle of 2,4 and 8 ?
    Thanks

    Hi Kathik,
    I have gone through one document. It's saying the below mentioned things :
    Jun 7, 2012 9:36 PM (in response to Sarabjit)
    Re: What is the maximum number of etherchannels we can have?
    The maximum number of Etherchannels varies from platform to platform. The maximum number of ports in an etherchannel is either 8 ro 16 depending on the platform. The minimum number of ports in an etherchannel bundle is 1.
    Jun 8, 2012 1:27 AM (in response to Sarabjit)
    Re: What is the maximum number of etherchannels we can have?
    Etherchannels is a Cisco term. Other vendors call them 802.3ad trunks. It's common to see something like this in datasheets:
    48 ports 10/100/1000 Mbit/s
    802.3ad:
    Maximum of 32 groups
    Maximum of 8 ports per group
    The document url is https://learningnetwork.cisco.com/thread/43680
    The another document says the below mentioned things :
    Matrix of Load Balancing Methods
    This matrix consolidates the load balancing methods that this document describes:
    Platform
    Address Used in XOR
    Source-Based?
    Destination-Based?
    Source-Destination-Based?
    Load Balancing Method—Configurable/Fixed?
    6500/6000
    Layer 2, Layer 3 addresses, Layer 4 information, or MPLS information2
    Yes
    Yes
    Yes
    Configurable
    5500/5000
    Layer 2 address only
    Yes
    Cannot change the method
    4500/4000
    Layer 2, Layer 3 addresses, or Layer 4 information
    Yes
    Yes
    Yes
    Configurable
    2900XL/3500XL
    Layer 2 address only
    Yes
    Yes
    Configurable
    3750/3560
    Layer 2 or Layer 3 address only
    Yes
    Yes
    Yes
    Configurable
    2950/2955/3550
    Layer 2 address only1
    Yes
    Yes
    —1
    Configurable
    1900/2820
    These platforms use a special method of load balancing. See theCatalyst 1900/2820 section for details.
    8500
    Layer 3 address only
    Yes
    Cannot change the method
    1 For the 3550 series switch, when source-MAC address forwarding is used, load distribution based on the source and destination IP address is also enabled for routed IP traffic. All routed IP traffic chooses a port based on the source and destination IP address.
    2 For the 6500 series switches that run Cisco IOS, MPLS layer 2 information can also be used for load balancing MPLS packets.
    The document url is http://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/12023-4.html
    Another document says the below mentioned things for load-balancing :
    inally, here is full list of valid load-distribution methods:
    •dst-ip—Load distribution on the destination IP address
    •dst-mac—Load distribution on the destination MAC address
    •dst-port—Load distribution on the destination TCP/UDP port
    •src-dst-ip—Load distribution on the source XOR destination IP address
    •src-dst-mac—Load distribution on the source XOR destination MAC address
    •src-dst-port—Load distribution on the source XOR destination TCP/UDP port
    •src-ip—Load distribution on the source IP address
    •src-mac—Load distribution on the source MAC address
    •src-port—Load distribution on the source port
    The document url is https://learningnetwork.cisco.com/thread/63064
    Please suggest.

  • What is the maximum number of line items we can enter in an order...

    Hi,
       Can anyone explain what is the max number of line items that v can enter in an order....
    or if i want to increase the number of line items than the max where it is controlled.
    Because my mm counter part is facing this in the PO he could make only 9999,the problem is when posting...the accounting document is not getting generated bcas of exceeding the limit.
    venugopal

    hi,
    this is my personal experiance that we can enter at the most 499 line items in SALES ORDER.
    This is because for every line item there will be 2 financial entries, debit and credit. and 1 FI document can have at the most 999 line items (which we can not increase without KEY fromSAP)
    If we divide 999 by 2 then it comes to 499.50 so you can enter at the most 499 line items in Sales order.
    Regards
    Vishal

  • What's the maximum number of view criteria that a view object can contain?

    We are making extensive use of view criteria in our view objects, mainly for LOV purposes. Is there a figure on the maximum amount of view criteria a view object can contain.
    Regards
    Ollyando
    Somewhere in Canada

    Hi,
    I am not aware of a limitation
    Frank

  • What is the maximum number of user accounts that IMS 5.0 supports?

     

    This sort of determiniation is based on several factors like:
    - What access protocol is being used? (IMAP, POP, or Webmail)
    - How often users check their mail
    - What sort of hardware the server is running on.
    - The network connection from the clients to the server.
    - Is LDAP on the same system as iMS.
    -Chris

  • What's the maximum number of i-pads that I can connect up to a single i-tunes account?

    I'd like to know if I can connect up to say 20 i-pads on a single account - to allow me to have automated control over the content on all. Also I'd like to be able to allow each user to register their own i-tunes account and make purchases of their choice on each i-pad accordingly.

    Check out the Apple Configurator here http://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
    As well as the iPad Enterprise web site http://www.apple.com/support/ipad/enterprise/
    Many options to choose from.

  • What is the max number of New-MailboxExportRequest that can be InProgress at the same time?

    I haven't been able to find an answer for this, so I'm hoping someone can clarify off the top of their head.
    If you queue up a large number of New-MailboxExportRequests, how many of them can be "InProgress" at once? I'm assuming there is an upper limit on the number that will be processed, with the others remaining queued.
    As a follow up, is that default number something you can modify?

    Hi,
    The default maximum simultaneous move requests is different for each parameter:
    MaxActiveMovesPerSourceMDB
    MaxActiveMovesPerTargetMDB
    MaxActiveMovesPerSourceServer
    MaxActiveMovesPerTargetServer
    To override the default value, you can refer to the article provided by Josh above. Even though this article is for Exchange 2010, these values in Exchange 2013 are exactly the same ones set by default in Exchange 2010, Exchange 2013 follows them.
    Thanks,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Belinda Ma
    TechNet Community Support

  • What is the Maximum inputs and alternate inputs that can be associated to a formulation specification.

    Hi, can you please let me know how many maximum inputs can be associated to a formulation specification. Thanks, Rohini M

    I don't believe we have a hardcoded limit.  Are you having issues when you reach a certain number?

  • What is the maximum size of indexed array that can be created during execution of while loop?

    Hello,
    I am using a ring acquisition to take in images. If i write them as files in the loop, it slows down the acquisition unacceptably. Therefore i am converting image to array and storing the array until the acquisition is complete and then reading the array and converting back to image to save. The program sometimes runs out of memory (after a couple of minutes). Can anyone think of a way where i can store the array/images within the execution (without losing image information), without slowing it down and to avoid this memory problem?
    I have included the VI.
    Thanks in advance for any help or advice.
    kindest regards,
    FraserD
    Attachments:
    LL_Ring_in_IMAQ_8_bit_array_then_write_as_png.vi ‏94 KB

    When you build the array of pictures you do it using auto-indexing out of a while loop. That means that memory is aquired for a copy of the previous picture array and the array is rebuilt on every iteration, this is slow and requires a lot of extra memory.
    If you want to speed things up try initializing a shift register with a 3D array of a size that will be able to hold a certain number of pictures, then replace the "pages" as new pictures are aquired, replace operations do not require copying of the previous array and will thus be much much faster. The difference is exeptional when dealing with large arrays/amounts of data.
    Now, the shift register buffer could be built into a functional global, and you can add a push/pop logic to it so that you can have a p
    arrallell loop that works on writing the elements to disk. You could use a que for this, but I think even though you specify a size limit to the que it still aquires memory as new elements are added (correct me if I'm wrong people...:-)), so a functional global acting as a circular buffer og fixed size frame for a que should be better.
    MTO

  • The maximum number of PDF documents that can be simultaneous openned in the browser has been exceede

    I'm currently build a WinForms application that uses the built-in webbrowser to view PDF files. However, I just started getting this message. I saw someone's post but in was in the archive section and looks like it was never resolved. So I'm asking for Adobe's help if they're on here to put up a FAQ somewhere describing this error.
    I'm currently on Reader 8.1.2.
    Jeff

    First, no one is addressing Adobe here. This is a User 2 User forum. I'm
    not sure this is really a Reader issue as opposed to a Microsoft issue.
    Microsoft applications have a habbit of holding onto documents until the
    application is closed. Since you are most likely using MSIE, it is
    probably still holding onto the document via the reader plug-in until it
    quits.
    However, if you wish to log it as a Reader bug, here is the appropriate
    link:
    Mike

  • What is the maximum number of text characters

    Probably has been asked before, but what is the maximum number of text characters that can be used in a song title and still be burned to a disk. TIA

    Are the files tucked away in some deeply nested folder. I've not used Toast (being a PC) but my experience of other burning software suggests that it is usually designed to truncate the filenames to meet the specification of the format it is using. Also I believe "Red Book" is the audio standard so the output will simply be a number of audio tracks with the accompanying index. Filenames on the output end should be irrelevant, unless you've enabled CD Text which is not Red Book standard, and again Toast should enforce any field limits. Perhaps Toast is having trouble reading the files rather than a problem writing them. I assume the files are on an internal drive and you are not trying to burn DRM'd files.
    Use a rewritable disc and clone a small audio file multiple times, giving them filenames of 40,45,50,55 etc. characters then try to burn them in a list of increasing length of filename - see which one Toast hangs on.
    tt2

Maybe you are looking for

  • TM has been backing up to Time Capsule for a month, but there's nothing there

    Brand-new retina MacBook Pro (512 GB SSD) connected to brand-new Time Capsule (3 GB). Software is all up-to-date (Mountain Lion). After purchasing and setting up this top-of-the-line system last month, Time Machine was configured to make backups on t

  • Coherence Error at the time of Starting weblogic Server

    Hi , I am getting below error at the time of starting Weblogic OSB managed server We are using osb_cluster1 (Unicast) for osb_server1 managed server. When Weblogic server try to start the managed server we get following Coherence errors and startup s

  • Oracle Not Starting : error ORA-19809

    Hello All, I was trying to start the 11gr2 database and getting the following error. Please can any one give some advise ? I manually deleted all archive logs using OS command but still i get the same error when i try to start the database. ORA-19815

  • Document Connection Client - Error 234882975

    Hi, I have been using the MSFT Document Connection client (version 14.3.9) on Mac OS Lion 10.7.5 to access files stored on SharePoint (on an Office 365 subscription) for several years.  Yesterday I had an internet outage while trying to access files

  • Has anybody been able to pair a 2008 Audi A4 to iPhone 5 for music?

    Has anybody been able to pair a 2008 Audi A4 to bluetooth music? I have no problem pairing blueooth using the hands free phone. However I'm not sure how to stream my music to my car using bluetooth. I tried just playing the music straight up but the