What is the maximum operating time of the airport and airport extreme?

What is the maximum operating time of the airport and airport extreme? Can I leave it on for long periods of time, like never turning it off? Will it affect the performance of the said products?

Apple does not include an "Off" button on the AirPorts since they assume that you will leave it on all the time, like you would a modem.
If you are going to be gone for a week or two, it might make sense to power everything off during that time.
Otherwise, leaving the device(s) "On" actually results in less stress on the device that constantly turning it "Off" and "On". In other words, odds are the device will last longer if you leave it "On" most of the time.
Apple does not publish a life expectancy for the devices, but 5-7 years...on average....for a modem or router is about right....my opinion here.

Similar Messages

  • What's the maximum LAN speed with the Thunderbolt to Gigabit Ethernet Adapter on my MacBook Pro?

    While I was at Yodobashi Camera yesterday, I got a Thunderbolt to Gigabit ethernet adapter for my MacBook Pro. I figure, since I'm paying for the high speed fiber optic (Sony Nuro), why limit my self to wi-fi speeds at home?
    Before connecting the adapter, via wi-fi it the speed was 143.8 Mbps down and 181.5 Mbps up.
    After connecting the adapter and making a direct LAN connection to the router, the speed is 783.2 Mbps down and 940.1 Mbps up.
    I'm certainly happy with the speed, but since Sony Nuro is supposed to be 2 Gbps down and 1 Gbps up I was wondering what the maximum possible is with this computer and adapter. Before asking the provider I was curious what the maximum specs where.
    The ether cable is a 3 m category 6.
    Thanks,
    doug

    It's not really your computer that is getting the 2Gbps download - it is the router/ modem.
    If you hooked better/ different hardware up you could probably push those speeds around your network too. The trouble is that most residential hardware is gigabit ethernet not fibre. Fibre cards & cable are expensive in comparison.
    The existing hardware may allow you to 'bond or aggregate' multiple ethernet connections into one link to get more speed over ethernet. Obviously this requires more complex routers, switches & a network admin to set it up
    Those speeds sound nice, this bottleneck will mean that other devices on you network can't choke up the whole connection & make other users sad.

  • How does the GR processing time affect the scheduling of the process order & the latest start date in the operation.

    Hi
    Can anyone explain  how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.

    Hi
    GR processing time means number of workdays required after receiving the material in storage.
    Check this link:GR Processing time
    Regards,
    Anupam Sharma

  • The wait operation time out

    Dear all,
    I am facing one problem with my user pc "The wait operation time out"
    ERROR= 
    Aconnection was successfully established with the server. but then an error occurred during the pre-loging handshake. (provided , SSL providing error-0 , The wait operation time out microsoft SQL server error- 258.
    my user-pc use windows 7 and connect VPN by using "Sonic-wall" we connect successfully and get my remote server IP ping reply but when try to access remote server database that time I am getting this error
    At the same time using same network and id can connect the server from vpn and access database from other
    system.
    please help me sort it out this issue. 
    thanks 
    sajal 

    Hi Sajal,
    It is possible that remote machine(server) is up but please check whether database server is up or not.
    Please contact database administrator to know the status of database. This will help you to know the cause.
    If database is down you cannot connect it.

  • Operation time at the time of confirmation

    Hi Guru's,
    I want a report on  operation time as per routing  and  actual time of operation entered at the time of
    order confirmation . Any Tcode could you suggest where i can get operation time ( asper Routing ) and
    actual time of the operation against order . I have checked coois with different layout it is available but
    i want report on all the order number also checked in AFVC table not getting  .
    Please suggest  some Tcode / report where i can extract this .  points will be awarded for the suitable
    answers.
    expecting your reply at the earliest,
    regards,
    vimal

    Hi Guru's,
    I repeat this question because i did not get  answer and people are points oriented and answering
    the questions which are repeated no of times. Please take it serious and  this time i anticipate that
    PP guru's will revert  with solutions .
    I want a report on operation time as per routing and actual time of operation entered at the time of
    order confirmation . Any Tcode could you suggest where i can get operation time ( asper Routing ) and
    actual time of the operation against order . I have checked coois with different layout it is available but
    i want report on all the order number also checked in AFVC table not getting .
    Please suggest some Tcode / report where i can extract this . points will be awarded for the suitable
    answers.
    expecting your reply at the earliest,
    regards,
    vimal

  • I have Mac OS X Version 10.6.8 ,I want to buy the updated operating system that puts iMessage and Facetime on my Macbook Pro. What should I search for, and then purchase, in the App Store?

    I have Mac OS X Version 10.6.8 ,I want to buy the updated operating system that puts iMessage and Facetime on my Macbook Pro. What should I search for, and then purchase, in the App Store?

    FaceTime can run in the version of OS X that you currently have. To get Messageyou need Mountain Lion. The protocol used by Messages is iMeassage.
    The question is does your MBP meet the specs for Mountain Lion.
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory
    8 GB or more of available space

  • Can't setup iCloud V 4.  I get error:  You have exceeded the maximum number of 25000 allowed events and tasks.  I get this error no matter what choice I select to setup.

    Can't setup iCloud V 4.  I get error:  You have exceeded the maximum number of 25000 allowed events and tasks.  I get this error no matter what choice I select to setup.

    Is your I tunes ID an @me.com ID?  If not, i cloud ONLY works with an @me.com ID. You will have two ID's. One for I cloud, one for I tunes

  • What is the maximum number of ARP entries (IPv4) and ND entries (IPv6) supported in our controllers?

    Q: What is the maximum number of ARP entries (IPv4) and ND entries (IPv6) supported in Aruba controllers?
    A: The maximum number of static ARP entries supported is about 2048 for M3/72xx/70xx platforms.
    The maximum number of static ARP entries supported is about 128 for 6xx platforms.
    The maximum number of static ND entries supported is about 2048 for M3/72xx/70xx platforms.
    The maximum number of static ND entries supported is about 128 for 6xx platforms.

    a)It depends upon software level. b) 16,000 per card, With release 9.3:
    60K Connections Support on BXM-E—Provides the ability to support a maximum of 60K per card for VSI applications for the BPX 8600, for example, PNNI or MPLS, used on enhanced BXM-E cards.

  • HT201250 when restoring a time machine backup to a new computer, does it affect the new operating system on the new computer

    when restoring a time machine backup to a new computer, does it affect the new operating system on the new computer?

    That depends on how you do it.
    By far the best, easiest, most reliable method is to use Setup Assistant when your shiny new Mac first starts up, to transfer your apps, users, data, etc.   That doesn't disturb either the OS or basic Apple apps that came with the new Mac.  See Using Setup Assistant on Mountain Lion or Lion.
    There is a facility to restore an entire system from Time Machine backups, including the version of OSX on the backup, but that's for use when your internal HD has been erased or replaced only.  It's not a good idea to restore the full backup of one Mac to a different one.  Depending on the circumstances, the installer may not allow it.  Even if it does, the Mac may not start up, or may kernel panic, or not work properly.

  • When i send an imessage from ipad I get the answer most times at the iphone, not at ipad from where i sent the message. Apple ID on both devices is the same. What can i do?

    When i send an imessage from ipad I get the answer most times at the iphone, not at ipad from where i sent the message. Apple ID on both devices is the same. What can i do?

    I am sorry, my english isn't very good.
    Next try :) I send a iMessage from my ipad (wifi only) to a friend and he answers but i don't receive the answer on the ipad but on the iphone instead. Both devices using the same Apple ID (Settings>Messages>Receive At, same Adress on both devices). I tought iMessages are always received on bothe devices, like the advertisment says i should be able to start a iMessage conversation on ipad and finish it on iphone because both devices receive my iMessages... Thats not like it is on my devices, most times iMessages are only received from the iphone.

  • DPS(pdf): What is the maximum zoom-factor for the iPad

    Hi,
    What is the maximum zoom-factor for the iPad?
    Regards,
    Anil Yadav

    I'm sorry -- I have not communicated my question well.   When I use full
    page mode (no window borders, Ctrl-L) and zoom to many thousands %, then
    entire screen (14000 pixels by 1200 pixels) is not used -- only about 9000
    pixels x 1200 pixels.   The entire screen should have document content
    because I'm extremely zoomed in.  There is no meaning to pixels/inch in
    this context (and I tried your suggestion -- it made no difference).   This
    seems to be a hard limitation of Adobe Reader X screen display...?
    Thanks,
    Scott

  • What is the maximum memory capability of the HP Pavilion 15-p210na laptop?

    What is the maximum memory capability of the HP Pavilion 15-p210na laptop?
    Many thanks.
    /whinge
    ...and why don't HP publish this information somewhere easily found?
    Do they want to make it harder for people to decide to purchase their product?
    /endwhinge

    R_Lange wrote:
    What is the maximum memory capability of the HP Pavilion 15-p210na laptop?
    Many thanks.
    /whinge
    ...and why don't HP publish this information somewhere easily found?
    Do they want to make it harder for people to decide to purchase their product?
    /endwhinge
    Hi,
    I guess that 8 or max 12GB. It depends how many slots. It should support 12GB with 2 memory slots but only 8GB with a single one. The CPU itself supports up to 16GB.
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

    H,
    Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
    Event 1001
    Op Code NLS initialization
    The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
    We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now. 
    I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
    How do we ascertain the  cause of this error and the specific registry key that might be problematic?

    Hi,
    This could be caused by firewall rules or security softwares.
    http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
    And in addition, the fix is worth a try.
    Nothing happens when you double-click "Region" in Control Panel 
    http://support.microsoft.com/kb/2958845
    Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

  • Gif - file help: i don't want to read the gif each time from the file.....

    Hello there guys,
    i'm making a game and therefor i need to read a gif file like 20 times.
    i don't want my program to read the gif each time from the file, but only once.
    so i load it into an image or something?
    cuz opening the gif 20 times from my hard disk is a lot of time loss....
    opening it once and store it is much more efficient
    thx in advance
    plz help me out, cuz i don't really know how to do it.
    (in Delphi it's easy, but Java......)
    greetz,
    SpeciesXX
    Ramon Ribbe

    yes, it works, i used this code, thx man
    void button1_ActionPerformed(java.awt.event.ActionEvent event)
              ImageIcon image = new ImageIcon("f:/a.gif");          
              JLabel label = new JLabel();          
              label.setIcon(image);                    
              this.getContentPane().add(label);
              label.setBounds(10,10,100,100);
    and there i see my image :-)
    but 1 more thing, should i display all those blocks (images) on an applet, or should i use something else? (like what??)
    a sort of frame?
    because later on i have the field where all the blocks are in, and i have an area surrounding it, displaying all kinda information about the game, like how many lives remaining....
    can i put 2 applets in eachother? like applet1 is the parent of applet2?
    or should i use something else?
    plz help me, cuz java is kinda new to me i see....
    in delphi i just used 2 forms, form 1 with the blocks, form2 with the rest of info, and also being the parent of form1
    thx again, soon i can help ya guys too, i hope..
    (im learning java at school, but way too slow and to ez)
    Ramon

  • Is there a breeze export option that defines the maximum opening resolution of the browser ?

    Hi,
    The maximum resolution of a breeze presentation slide is 720
    x 540 correct?
    Does anyone know if there is a way to prevent that a breeze
    presentation gets too big when it is opened in a big resolution
    screen?
    What I’m asking is if there is a breeze export option
    that defines the maximum opening resolution of the browser that
    contains the breeze presentation, preventing the images and flash
    animations to loose too much resolution…
    When I play my presentations from the breeze server, it
    doesn’t load in the web browser but in a window that not fit
    the entire computer screen, what is good to the definition of the
    presentation…It is possible to do this locally??
    (I may be wrong, but in the breeze server is it opening the
    swf file directly?)
    I sure can, after exporting, place the swf file of the
    presentation, manually, in an html file (instead of using the
    index.html that is created in the publishing) this way it will
    never get bigger when opening it in the browser, but if I do this
    it will affect the SCORM or anything else??
    What do you suggest?

    Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    * http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    * http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes

Maybe you are looking for