What is the maximum ram for the zd 8000

I have a zd8000  what is the max. ram this will take.
Thanks
This question was solved.
View Solution.

zd8000 is more like 2009 or so. Here is the Service Manual:
Manual
The series started out as a Socket 775 Pentium 4 machine but I believe by the end of the run, with a BIOS update you could actually use Core2 Duo processors in it and it could take up to 4 gigs of RAM and run 64 bit Windows. The model numbers ran up into the zd8400 range, if I recall. They are enormous machines which are essentially desktop computers in a laptop case but lots of room in there so easy to disassemble and work on. 
There should be a tag on the bottom with the full model number. The Manual does not really describe the later versions very well. It is a pretty rare beast, you do not see very many of them. 

Similar Messages

  • What's the maximum RAM for this notebook (C742EM)

    What is the maximum RAM size for this notebook?

    Hi,
    The following link shows its specs and max size is 2Gb
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01179737&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What's the maximum ram for G4 1Ghz?

    Can someone please tell me what's the maximum ram I can install in my PowerBook G4.  It currently has 1 Gb Ram.
    Thank you.

    See:
    http://download.info.apple.com/Apple_Support_Area/Manuals/specs/powerbook/L24362 A_EN.pdf
    Processor and memory
    • 867MHz or 1GHz PowerPC G4 processor with Velocity Engine
    • 1MB DDR SRAM level 3 cache • 133MHz system bus • 256MB or 512MB of PC133 SDRAM; two SO-DIMM
    slots support up to 1GB
    Message was edited by: kennethfromtoronto

  • What is the maximum RAM for 2.16 GHz 24 in DDR2 iMac Early 2006

    What is the maximum RAM that I can install on iMac 24 in 2.16 GHz DDR2 Early 2006 model?

    Is this your Mac:
    http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.16-24-inch-sp ecs.html
    I had the same model: officially it'll support 3 GB RAM; some people added 4 GB and it ran fine, but it will only address about 3.2 GB. I decided that wasn't worth it and made do with 3 GB.

  • What's the maximum RAM for this notebook (ze2000)?

    Hello,
    i want to find out, what's the max memory for notebook ze2000 (p/n: EF062EA#ABU)
    Andrius
    LTU

    Hi:
    According to the service manual for your notebook at the link below, maximum is 2 x 512 MB for 1 GB.
    Chapter 1, page 1-3.
    http://h10032.www1.hp.com/ctg/Manual/c00400869.pdf
    I would run the free Crucial Memory scanner and see what it reports.  1 GB seems pretty low for the hardware in your notebook.
    http://www.crucial.com/systemscanner/
    Paul

  • What is the maximum MBPS for the AirPort Extreme 5th Generation?

    I am considering the E4200 v2 and AirPort Extreme routers. Can any give me the pros & cons for each? Price is about the same with the E4200 v2 $20 more.

    For an excellent review of the 5th Gen AirPort Extreme Base Station (AEBSn), I would recommend that you check out the following SmallNetBuilder article. They not only provide comprehensive data on testing the base station's performance. but they also do so for a number of other router manufacturer products, including the Cisco/Linksys E4200V2 that you are also interested in.

  • What is the maximum RAM for 2008 MacBook pro

    I've seen some here say they have 8gb. Manual says 4 is max. What is the correct number?

    You're welcome.
    My late 08 Uni also states 4GB Max but been running 8GB for a year now.
    Same with my 1 month old late 2011.  Specs says 8GB Max.  Been running it with 16GB the day I bought it.
    I have Crucial installed in both my Macbooks.
    If your MB works for you, then just use it with the RAM upgrade so it can last you for awhile.  You'll see a difference in speed.
    Another thing to check is your hard drive.  If it's almost full, delete some files you're not using and clear your cache memory once in a while.
    An almost full hard drive also slows down your MB.

  • Whats the maximum RAM for my MacBook Pro?

    Thanks to any and all.
    MT3

    Sorry, I thought i included that info.
    From what i found online, it looks as if 4GB is the max. However i can't figure out if thats per slot, or if I can put 2GB in each available slot.
    I currently have 1GB SDRAM per slot.

  • Is there anyway or increasing the maximum ram capacity on a macbook a1181?

    Looking to upgrade some ram, but more than only 2GB, any help?

    The A1181 simply means it's one of 17 models of MacBook with a plastic case and a removable battery. Check out http://www.everymac.com/ultimate-mac-lookup/?search_keywords=A1181
    Each MacBook has a Model Number like 2,1, 3,1 etc... To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier.
    OWC lists the maximum RAM for each model on this page. http://eshop.macsales.com/shop/memory/MacBook/DDR2/

  • Maximum RAM for MB mid 2010

    Hi I'm using a Macbook White Mid 2010, and I'm planning to upgrade it's ram for Final cut Pro~
    so yeah, I just want to know what is the maximum ram for MB mid 2010 A1342

    Click here for information.
    (114960)

  • MAXIMUM RAM for MacBook Pro Core 2 Duo Mid 2010

    What is the MAXIMUM RAM for MacBook Pro, 2.4 GHz Intel Core 2 Duo, Mid 2010 - 24MC374LL/A, running OS X 10.8.2 (12C60)?
    I tried to search for this but was unable to find anything.
    Apple Specs say 8GB, but I was just told by someone I THINK would know, that you can actually go up to 16GB.
    This would be an enormous improvement to my workflow if true.
    Anyone out there know for certain?
    Making sure before I buy (or NOT!)
    Thanks.
    Jerry G

    I just found this post and I realize this is a late response but maybe it will help others.
    Based on recent circumstances I just happened to have two 8GB DDR3 modules collecting dust. Having an old trusty MacMini as my media center, server among other things and whatnot, I was curious if I could bump this little thing to 16GB. In doing so I found this post and verified with OWC.
    End result:
    Booted with no issues, and is running nice and smooth. Should be noted that just adding 16GB of RAM to a Core 2 Duo will not make the machine lightning fast or become some amazing computing platform. It will just make the box run a bit quicker and give you the ability to have more applications open before you begin to note some lag.
    However this is really nice to see:

  • Were are the default settings for the screen resolution

    ?

    The default resolution for any LCD display is usually it's maximum, which is the resolution at which the display is sharpest (for lower resolutions, an LCD display as to interpolate which results in a slightly fuzzy display). The maximum resolution for the built-in LCD for all models of MacBook (not the MacBook Pro) is 1280 by 800.

  • Condition that takes only one row with the maximum cost of the maximum date

    I have to the following query
    SELECT distinct b.segment1 ||'.'|| b.segment2 as ITEM,
           so.vendor_site_id as SUPPLIER,
           'VE' as ORIGIN_COUNTRY_ID,
           replace(round(l.mto_costo_neto/l.can_unidades_empaque,2),',','.') as UNIT_COST,
           5 as lead_time,
           null as pickup_lead_time,
           l.can_unidades_empaque as supp_pack_size,
           1 as inner_pack_size,
           'C' as round_lvl,
           50 as ROUND_TO_INNER_PCT,
           50 as ROUND_TO_CASE_PCT,
           50 as ROUND_TO_LAYER_PCT,
           50 as ROUND_TO_PALLET_PCT,
           null as MIN_ORDER_QTY,
           null as MAX_ORDER_QTY,
           'FLAT' as PACKING_METHOD,
           'N' as PRIMARY_SUPP_IND,
           'Y' as PRIMARY_COUNTRY_IND,
           case when b.primary_unit_of_measure like '%KG%' then 'KG'
                when b.primary_unit_of_measure like '%Kg%' then 'KG'
                when b.primary_unit_of_measure like '%UND%' then 'EA'
                when b.primary_unit_of_measure = 'Kilogramo' then 'KG'
                when b.primary_unit_of_measure = 'Litro' then 'L'
                when b.primary_unit_of_measure = 'Unidad' then 'EA'
                else null
           end as DEFAULT_UOP,
           1 as TI,
           1 as HI,
           null as SUPP_HIER_TYPE_1,
           null as SUPP_HIER_LVL_1,
           null as SUPP_HIER_TYPE_2,
           null as SUPP_HIER_LVL_2,
           null as SUPP_HIER_TYPE_3,
           null as SUPP_HIER_LVL_3,
           null as CREATE_DATETIME,
           null as LAST_UPDATE_DATETIME,
           null as LAST_UPDATE_ID,
           case when b.primary_unit_of_measure like '%KG%' then 'KG'
                when b.primary_unit_of_measure like '%Kg%' then 'KG'
                when b.primary_unit_of_measure like '%UND%' then 'EA'
                when b.primary_unit_of_measure = 'Kilogramo' then 'KG'
                when b.primary_unit_of_measure = 'Litro' then 'L'
                when b.primary_unit_of_measure = 'Unidad' then 'EA'
                else null
           end as COST_UOM,
           null as TOLERANCE_TYPE,
           null as MAX_TOLERANCE,
           null as MIN_TOLERANCE
    FROM mrp.mrp_sr_assignments sr , MRP.MRP_SR_RECEIPT_ORG ro , MRP.MRP_SR_SOURCE_ORG so,
         inv.mtl_system_items_b b, lcm.cmp_lineas_cotizacion l
    WHERE sr.SOURCING_RULE_ID = ro.SOURCING_RULE_ID
          and ro.SR_RECEIPT_ID = so.SR_RECEIPT_ID
          and sr.inventory_item_id in ((select inventory_item_id  from TMP.VIVERES_VEGETALES)
                                      UNION ALL
                                      (select inventory_item_id  from TMP.GENERICOS)
                                      UNION ALL
                                      (select inventory_item_id from TMP.HIJOS_GENERICOS))
          and sr.inventory_item_id = b.inventory_item_id
          and b.organization_id = 136
          and sr.inventory_item_id = l.cod_producto_idI need to agregate the following condition
    For example, The following query
    SELECT l2.fec_ini_vigencia_costo, l2.mto_costo_neto, l2.can_unidades_empaque, l2.cod_producto,
           REPLACE(ROUND(l2.mto_costo_neto/l2.can_unidades_empaque,2),',','.')  costo_unidad
    from cmp_lineas_cotizacion l2
    order by cod_producto, fec_ini_vigencia_costo desc, mto_costo_neto descgenerate
    FEC_INI_VIGENCIA_COSTO     MTO_COSTO_NETO     CAN_UNIDADES_EMPAQUE     COD_PRODUCTO      COSTO_UNIDAD
    17/06/2010     382.56     12     1.1000008     31.88 -- THIS ONE
    17/06/2010     382.56     12     1.1000008     31.88
    17/06/2010     371.0832     12     1.1000008     30.92
    17/06/2010     371.0832     12     1.1000008     30.92
    18/05/2009     382.56     12     1.1000008     31.88
    04/05/2009     245.82     12     1.1000008     20.49
    13/04/2009     382.56     12     1.1000008     31.88
    23/03/2009     373.2072     12     1.1000008     31.1
    23/03/2009     373.2072     12     1.1000008     31.1I need to take only one row with the maximum FEC_INI_VIGENCIA with the maximum COSTO_UNIDAD of the table lcm.cmp_lineas_cotizacion l, which is calculated with the formula ROUND(l2.mto_costo_neto/l2.can_unidades_empaque,2)

    A better example
    I need only one row the maximum COSTO_UNIDAD for the maximum FEC_INI_VIGENCIA for every cod_producto_id in the table lcm.cmp_lineas_cotizacion
    I need to take these values
    FEC_INI_VIGENCIA_COSTO     MTO_COSTO_NETO     CAN_UNIDADES_EMPAQUE     COD_PRODUCTO_ID  COSTO_UNIDAD
    17/06/2010     382.56     12     1.1000008     31.88 -- THIS!
    17/06/2010     382.56     12     1.1000008     31.88
    17/06/2010     371.0832     12     1.1000008     30.92
    17/06/2010     371.0832     12     1.1000008     30.92
    18/05/2009     382.56     12     1.1000008     31.88
    04/05/2009     245.82     12     1.1000008     20.49
    13/04/2009     382.56     12     1.1000008     31.88
    17/06/2010     382.56     12     1.1000008     31.88
    17/06/2010     382.56     12     1.1000008     31.88
    17/06/2010     371.0832     12     1.1000008     30.92
    17/06/2010     371.0832     12     1.1000008     30.92
    18/05/2009     382.56     12     1.1000008     31.88
    04/05/2009     245.82     12     1.1000008     20.49
    13/04/2009     382.56     12     1.1000008     31.88
    27/10/2010     1171.549344     12     1.1000009     97.63 -- THIS!
    13/10/2010     1171.549344     12     1.1000009     97.63
    06/09/2010     1171.549344     12     1.1000009     97.63
    02/08/2010     1048.825056     12     1.1000009     87.4
    28/07/2010     754.8     12     1.1000009     62.9
    27/07/2010     614.04     12     1.1000009     51.17
    21/06/2010     954.84     12     1.1000009     79.57
    27/05/2010     614.04     12     1.1000009     51.17
    07/07/2009     1143.17     12     1.1000010     95.26
    28/03/2009     1143.17     12     1.1000010     95.26
    27/10/2008     1744.644672     12     1.1000010     145.39
    01/07/2008     1690.12224     12     1.1000010     140.84
    07/07/2009     1143.17     12     1.1000010     95.26             --THIS!
    28/03/2009     1143.17     12     1.1000010     95.26
    27/10/2008     1744.644672     12     1.1000010     145.39
    01/07/2008     1690.12224     12     1.1000010     140.84
    07/07/2009     1143.17     12     1.1000010     95.26
    28/03/2009     1143.17     12     1.1000010     95.26
    27/10/2008     1744.644672     12     1.1000010     145.39
    01/07/2008     1690.12224     12     1.1000010     140.84

  • What is the maximum ram upgrade possible on a Mid 2011 iMac 21.5-inch

    I have an iMac 21.5-inch, Mid 2011 running OS X 10.9.5 which currently has 4 GB 1333 MHz DDR3 Ram. The Hard Drive has 149.87 GB free out of 499.25 GB. It has been running slow for a while now. I would like to know what is the "TRUE" maximum Ram Upgrade possible. The reason I say "TRUE" is because the specs say one things when I find others saying another. I would like to install the maximum Ram that will increase the speed to its optimum. I have read some information that this particular computer will not take advantage of anything past a certain amount of ram.
    So with all that said, I am asking for specific numbers, types of ram, suggestions etc etc...
    Thanks

    Here's what you can do and need:
    Maximum Memory
    32 GB (Actual) 16 GB (Apple)
    Memory Slots
    4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
    Sources for memory I recommend are:
    OWC
    DataMem
    Crucial.com

  • HT1338 how much is the mac mini A1347,i7,4GB RAM,1TB hard drive ?? and wat maximum upgrading for the ram ? thannks :D

    how much is the mac mini A1347,i7,4GB RAM,1TB hard drive ?? and wat maximum upgrading for the ram ? thannks

    go to Apples website and look.  That's what anyone else here would do.

Maybe you are looking for

  • Problems with Os 9 updating to osx 10.3

    Hello: I just bought a 350 mhz blueberry slot loading Imac G3 from 1999. It is currently running OS 9. I am using an ethernet connection. I was not prepared for OS and made a critical mistake early on--which has created more issues--which has brought

  • How can I install Adobe inDesign without optical drive?

    I have Word and a few other programs that are on CD's how can I put them on my MacBook Pro w/ retina display? Do I have to go to the apple store? Or buy that external DVD/CD Drive?

  • Unavailable Master Images are present

    Trying to relocate masters to an external drive using Aperture 2.1. Project with many albums which I am relocating to folders with the same name as the album on an external drive. Most of the albums I was able to relocate. There are 4 where I get the

  • Can someone show me how to use sorted/tree set

    i have a server program, and i want to create a sortedset, then everytime a client connects an element(nickname) is added to the sortedset.. i have to create a syncronized one i need to know how to add elements, and read elements one-by-one into a st

  • Shattered theme with text over photo

    How do you use the shatted theme and place text over a photo?  I have to use a blank text screen.  I did it before, but cant use i now.