What is the maximum size of a jpg that can be imported into iPhoto?

what is the maximum size of a jpg that can be imported into iPhoto

I've imported and worked on Photoshop and tiff files up at 220 MB (8400 x 6600 pixels) in size. It does take some time to do any edits, up to 7 seconds for some. 220 MB is a big file but iPhoto handles it OK.
I do have a top of the line iMac with SSD drive so it's pretty fast. Other Macs may be slower depending on their configuration.
OT

Similar Messages

What is the maximum size of indexed array that can be created during execution of while loop?

Hello,
I am using a ring acquisition to take in images. If i write them as files in the loop, it slows down the acquisition unacceptably. Therefore i am converting image to array and storing the array until the acquisition is complete and then reading the array and converting back to image to save. The program sometimes runs out of memory (after a couple of minutes). Can anyone think of a way where i can store the array/images within the execution (without losing image information), without slowing it down and to avoid this memory problem?
I have included the VI.
Thanks in advance for any help or advice.
kindest regards,
FraserD
Attachments:
LL_Ring_in_IMAQ_8_bit_array_then_write_as_png.vi ‏94 KB

When you build the array of pictures you do it using auto-indexing out of a while loop. That means that memory is aquired for a copy of the previous picture array and the array is rebuilt on every iteration, this is slow and requires a lot of extra memory.
If you want to speed things up try initializing a shift register with a 3D array of a size that will be able to hold a certain number of pictures, then replace the "pages" as new pictures are aquired, replace operations do not require copying of the previous array and will thus be much much faster. The difference is exeptional when dealing with large arrays/amounts of data.
Now, the shift register buffer could be built into a functional global, and you can add a push/pop logic to it so that you can have a p
arrallell loop that works on writing the elements to disk. You could use a que for this, but I think even though you specify a size limit to the que it still aquires memory as new elements are added (correct me if I'm wrong people...:-)), so a functional global acting as a circular buffer og fixed size frame for a que should be better.
MTO

What is the maximum size a sender SOAP adapter can handle?

Hi,
I am using sender SOAP adapter and receiver RFC adapter.
What is the maximum size of request message it can handle efficiently.
In the current scenario which I need to design , the request XML file could be up to 24 MB.
Also if you could comment on which would be the best to use as the sender side - SOAP or File Adapter
when the request message/file is of such size?
regards
Arun G

hi,
>What is the maximum size of request message it can handle efficiently.
it totally depends on your hardware and flow design inside XI/PI
>In the current scenario which I need to design , the request XML file could be up to 24 MB.
this size is not a lot for a "normal" XI machine but it also depends on the
volume of those messages - that is if you need to send
one message like that per day or 1000 per half an hour...
>Also if you could comment on which would be the best to use as the sender side - SOAP or File Adapter
when the request message/file is of such size?
SAP's general recommendation is to use messages around 5mb
but it heavily depends on other factors so don't threat it as a must
Regards,
michal Krawczyk

What's the maximum number of Apple TVs that can be displayed in the AirPlay list?

We have 50 conference rooms all on the same network and are considering equiping each one with an Apple TV for AirPlay Mirroring our iPad 2s to the rooms projector, or TV. What is the maximum number of Apple TVs that can be displayed in the AirPlay menu to select the correct Apple TV for the conference room being used?

From what you're saying it sounds as though you wouldn't want to Airplay to all AppleTVs at once, just identify them when that specific room in use?
This is one of those uncharted territories wheer most domestic users will not require such a set up - Apple provide no official info about this, but they'd be your best source to ask.
AC

What's the maximum size of a pdf you can upload to the adobe cloud service?

I'm trying to upload a book of 545 MB of size, with no success at all. Any information about restrictions? Thanks for the reply.

Hi emoussi,
I am so sorry for the inconvenience caused & will help you to get this issue resolved.
Please let me know the file format of the e-book that you are trying to upload & also let me know if there is any attachment with that or any java script implemented on that e-book?
Also, check your Internet upload speed at Speedtest.net by Ookla - The Global Broadband Speed Test as 545 MB is a big size to upload & it might take long time to upload depending on your Internet upload speed.
Regards,
Aadesh

What is the maximum number of matching entires that can be included in a filter ?

I have created a message filter for "junk".
I seem to have added one too many entries and now it does not filter any new "junk" entries.
I have deleted some of the new entries and added them again, only to find they are not filtered.

You may be right about CLI vs GUI differences...
Call me a geek - but I wanted to see what would happen when my system hit the limit. So I saved all open documents, used a loop to create 40 passwordless accounts, then set up a login item so that on login, FUS would be invoked to log in to the next sequential uid.
When I came back (some time later), the system was logged in to the 40th user, and with a few exceptions, things seemed to be working ok...
The most obvious problem was that SystemUIServer was crashed in most of the users. I'm not sure when that started, but at some point after so many logins, it wasn't possible to launch the SystemUIServer, meaning no FUS menu (among other things). Other programmes launched and worked ok, though a bit sluggish (I had 7 swap files at that point, where it is rare for me to have more than two). But "Terminal.app" worked fine, and FUS was possible via command line so that wasn't a big problem, and the few other accounts I switched over to check were in a similar state.
The "Accounts" pref pane seems to be limited to showing 42 accounts (I had several accounts prior to creating the 40 test accounts), but the FUS menu (viewed from an account where SystemUIServer hadn't crashed) showed them all. I forgot to check the "Login Window".
Of course, there may be other things that don't work under these conditions that I didn't stumble across, but depending on whether or not SystemUIServer is required, and probably load and RAM availability, it looks like it is possible to squeeze at least 40 logins at once on a system.
And again, this obviously isn't "official" in any way.

What is the maximum number of user accounts that can be logged in at once?

How many users can be logged in at once, using Fast User Switching (FUS)?
Ideally, I'd like an "official" answer from Apple, or if someone can refer me to "official" Apple documentation that answers this question, that would be fine.
I think the answer is 10 but need to know for sure.
Thanks in advance!
Mac OS X (10.4.9)

You may be right about CLI vs GUI differences...
Call me a geek - but I wanted to see what would happen when my system hit the limit. So I saved all open documents, used a loop to create 40 passwordless accounts, then set up a login item so that on login, FUS would be invoked to log in to the next sequential uid.
When I came back (some time later), the system was logged in to the 40th user, and with a few exceptions, things seemed to be working ok...
The most obvious problem was that SystemUIServer was crashed in most of the users. I'm not sure when that started, but at some point after so many logins, it wasn't possible to launch the SystemUIServer, meaning no FUS menu (among other things). Other programmes launched and worked ok, though a bit sluggish (I had 7 swap files at that point, where it is rare for me to have more than two). But "Terminal.app" worked fine, and FUS was possible via command line so that wasn't a big problem, and the few other accounts I switched over to check were in a similar state.
The "Accounts" pref pane seems to be limited to showing 42 accounts (I had several accounts prior to creating the 40 test accounts), but the FUS menu (viewed from an account where SystemUIServer hadn't crashed) showed them all. I forgot to check the "Login Window".
Of course, there may be other things that don't work under these conditions that I didn't stumble across, but depending on whether or not SystemUIServer is required, and probably load and RAM availability, it looks like it is possible to squeeze at least 40 logins at once on a system.
And again, this obviously isn't "official" in any way.

What is the Maximum inputs and alternate inputs that can be associated to a formulation specification.

Hi, can you please let me know how many maximum inputs can be associated to a formulation specification. Thanks, Rohini M

I don't believe we have a hardcoded limit. Are you having issues when you reach a certain number?

What is the maximum size for open_cursors parameter in 11g database

what is the maximum size we can set for open_cursors parameter in 11g database..

Oracle® Database Reference
11g Release 1 (11.1)
Parameter type     Integer
Default value     50
Modifiable     ALTER SYSTEM
Range of values     0 to 65535
Basic     Yes
For details, go to the following link:
http://www.seasongreetings.org/documentation/oracle/database/11.1/server.111/b28320/initparams153.htm

What is the maximum size for mailbox per user (Exchange 2007)

Hello,
I'd like to know:
What is the maximum size per mailbox, and is it not recommended to exceed 3 GB and about the items how many is the maximum per folder (inbox, .. )
I've Exchange 2007 SP2, Outlook 2007 and 2010.
Thank you.

Hi
There is no size limit on mailboxes up to the maximum size of your database. I normally recommend 2GB mailbox limits if you have some form of archiving in place. If you have no archiving in place then the limit should be set at the amount of
data people need to keep - it is not a good idea for people to store mail in PST files because there is a limit on their mailbox.
See this article for item count recommendations:
http://support.microsoft.com/kb/905803
Also you need to upgrade your Exchange 2007 server to SP3 ... SP2 has been out of support for nearly 3 years already:
Exchange 2007 Support Lifecycle
Steve

What is the maximum size of an image height (in pixels) that supports Muse? I noticed that if the photo is too high, reduce the Muses. thanks

What is the maximum size of an image height (in pixels) that supports Muse? I noticed that if the photo is too high, reduce the Muses.
thanks

Thanks for the explanation, it was very helpful
Paolo Guercio
Il giorno 11/nov/2014, alle ore 17:00, Vikas.Sharma <[email protected]> ha scritto:
If you place in Muse - an image with either height or width larger than 2048 pixels - Muse scales the image down proportionately, limiting the larger dimension to 2048.
However, if you want to use the placed image at its original size, you can scale the image up to desired size either by dragging the resizing handles or by entering Height and Width values in the Control Strip on top. After that, go to the Assets panel and locate the image in there, then right click that image in Assets panel and choose "Import Larger Size". That would bring back the lost image information from the original image.
Hope this gives you clarity on what you wanted to know.
Cheers,
Vikas
>

TS3276 What's the maximum size of an email to be sent by Apple's Mail program?

What is the maximum size of an email sent in the Apple Mail program? Is 2.9 MB too large?

susanzimm wrote:
Is 2.9 MB too large?
No, in terms of Mail.app. As WZZZ said, this limit is set by your ISP.
Yes, in terms of netiquette. Google it. Any file > 1MB is, IMHO, too big for e-mail. Nowadays, this rule may be more relaxed, because more people have broadband. You should check with your intended recipient.

What's the maximum size and length that go onto a DVD

I'm trying to put a whole load of home videos onto DVDs. What is the maximum size that can be burnt onto a DVD. There are a lot of hours on here, about 15 and I was hoping to try and get about 3 hours per DVD is this possible?
Thanks
Tom

If you're referring to a video DVD which will plan on a TV set via a DVD player then a single layer DVD disk can hold 120 minutes of playing time which includes the basic material and any animated menus in the project.
A double layer disk can hold 240 minutes.
If you are creating a data disk with the files copied to it then its a matter of grouping the files into batches of either slightly less than 4.7 GB for single layer and 9.4 GB for double layer.
if you're referring to video DVD discs follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

What's the maximum size.......

What's the maximum size of an ImageIcon to be supported by a Label???
I'm trying to show a 3.5 Mb image and doesn't show it. But a 1 Mb does....
Can anyone tell me why this happens???

Well maybe you have to set the size of the Label to the size of the Image - use setPreferredSize() to set the size of the label....
otherwise you can do something like this :
//Get the Icon
icon =
new ImageIcon(YourFrame.class.getClassLoader().getResource(
"/images/yourImage"));
//Get he Width of the Label on which the Image is placed
int width = imageLabel.getSize().width;
//Get the height of the label on which the Image is placed
int height = imageLabel.getSize().height;
//Get the Scaled image
Image scaledImage = image.getScaledInstance(width,height,Image.SCALESMOOTH);
//Set the Image of the Icon
icon.setImage(scaledImage);
//Update the Image Label
imageLabel.updateUI();
--j

What's the maximum size of data a coherence cluster can hold?

What's the maximum size of data a coherence cluster can hold before it starts noticing a degradation in performance?
Assume a partitioned topology is used with only one backup for each partition.

Hi,
Coherence partitioned cache is designed for linear scalability and it does it quite well. I don't see any reasons of performance degrations with increase in data size given, you have enough cores and memory for processing the requests and managing the data.
Cheers,
_NJ

What is the maximum size of a jpg that can be imported into iPhoto?

Similar Messages

Maybe you are looking for