What is the @ mean here?
select count(*) from proddta.fz15002@oneworld, proddta.fz15001@oneworld, proddta.f0101_aec_nonhr_view@oneworld where fz15001.jhz15doisy = 'R1'...............................
I know proddta is schema name, and fz15002 and fz15001 are table names.
I am wondering what is the @ mean here? and what is the oneworld supposed to be here?
Thanks
user8117130 wrote:
I know proddta is schema name, and fz15002 and fz15001 are table names.
I am wondering what is the @ mean here? and what is the oneworld supposed to be here?
select * from user_db_links where db_link = 'ONEWORLD'
Similar Messages
-
MM - PO - what is the meaning of this button?
Dear friends,
Could anybody help me with one question.
There is a strange button in a Purchasing Order on the Account Assignment tab page on this screenshot (it is marked with red color).
Screenshot below
http://content.foto.mail.ru/mail/raiden87/81/i-84.jpg
What is the meaning of this button? When it is used for?
I hope that anybody knows the meaning =)hi raiden,
as for as i have gone through the issue I have come to know that:
If you want to use multiple account assignment for a line item in PO then at that moment you will have to first press the "repeat on " button. only after that multiple account button will be active that is just before your "repeat on " button.
Steps:
1:Save your PO.
2:Go to transaction code ME22N to change the PO.
(Here you will firstly see that the multiple a/c assignment button is firsty gray.It will become active only after when you press the "repeat on" button).
I hope It will be helpfull for you.
regards,
Aslam Ansari. -
Could you tell me what's the meaning of the logfile-path and log-level?
we are running an productive xml database. but it is not stable now. Sometime it would report resource conflict error while you access xmldb via http protocol. I read the database logs and listener logs, but no abnormal message could be found. So, I want to find more information from the xmldb logs. While I run select DBMS_XDB.cfg_get().getclobval() from dual, I found that there are several logfile-path and log-level tags and I guess that these would be xmldb logs. Does anyone know what's the meaning of these tags?
I wondered about that one often too. I didn't have a chance yet to investigate (but maybe Mark will elaborate a little here), my guess is that it / or will be a possibility to enable tracing regarding the protocols or servlets.
Though It look like if you enable it it will trace to the XML file defined in the xdbconfig.xml. I also guess that (because there is also a XSD counterpart) that one could create an resource that streams the errors into a XDB ftp or http or ... xmltype table based on these settings.
This would be great because it would mature the protocol server regarding functionality. You could enable the tracing and see what happens. Until now the documentation doesn't give much extra insight...
<!-- FTP specific -->
<element name="ftpconfig">
<complexType><sequence>
<element name="ftp-port" type="unsignedShort" default="2100"/>
<element name="ftp-listener" type="string"/>
<element name="ftp-protocol" type="string"/>
<element name="logfile-path" type="string" default="/sys/log/ftplog.xml"/>
<element name="log-level" type="unsignedInt" default="0"/>
<element name="session-timeout" type="unsignedInt" default="6000"/>
<element name="buffer-size" default="8192">
<simpleType>
<restriction base="unsignedInt">
<minInclusive value="1024"/> <!-- 1KB -->
<maxInclusive value="1048496"/> <!-- 1MB -->
</restriction>
</simpleType>
</element>
<element name="ftp-welcome-message" type="string" minOccurs="0"
maxOccurs="1"/>
</sequence></complexType>
</element>
<!-- HTTP specific -->
<element name="httpconfig">
<complexType><sequence>
<element name="http-port" type="unsignedShort" default="8080"/>
<element name="http-listener" type="string"/>
<element name="http-protocol" type="string"/>
<element name="max-http-headers" type="unsignedInt" default="64"/>
<element name="max-header-size" type="unsignedInt" default="4096"/>
<element name="max-request-body" type="unsignedInt" default="2000000000"
minOccurs="1"/>
<element name="session-timeout" type="unsignedInt" default="6000"/>
<element name="server-name" type="string"/>
<element name="logfile-path" type="string"
default="/sys/log/httplog.xml"/>
<element name="log-level" type="unsignedInt" default="0"/>
<element name="servlet-realm" type="string" minOccurs="0"/>
...etc... -
why my iphone could not be restored ? and what is the meaning "this device isn't eligible for the requested build"
Covered in this support article:
http://support.apple.com/kb/ts4451
Which, you used to get here. You need to read the article & go through the troubleshooting steps. -
What's the mean of error infomation ?
tail /var/adm/messages
it shows as follows
Feb 4 09:32:44 mail3 last message repeated 1 time
Feb 4 09:34:45 mail3 SRS Proxy[1397]: [ID 663108 daemon.error] Could not upload bulk message
Feb 4 09:34:47 mail3 SRS Proxy[1397]: [ID 388765 daemon.error] Could not send message from queue: /var/SUNWsrspx/SRSQueueStore/store/queues/REGISTRATION/registration
Please tell me what's the mean?? thank you !!One more time:
This appears to be some kind of Sendmail error, not an iMS error. First, iMS does not normally log anything to /var/adm, so errors you see there are very unlikely to be from Messaging Server.
Second, none of us here really is likely to know sendmail well.
I would first check that you haven't installed some patch that has restored sendmail. Normally, on install of iMS, we replace Sendmail with our "compatibility" binary. Patching can replace that with real Sendmail, and your startup scripts can start Sendmail, preventing iMS from fully starting. Please check that.
If you believe that this is an error coming from iMS, then you will need to provide some context, like where the message shows, and any other symptoms. This bare error message doesn't really allow me to help you,. -
What's the meaning of GSM Rev A for the iPhone 4?
What's the meaning of GSM Rev A for the iPhone 4?
I need to know, what does Rev A mean?!??!!amy_lou wrote:
It's a certain type of the phone that determines which ipsw file you would download for beta versions of an iOS. The Rev A one means you've got an 8 GB iphone 4.
Both sentences here are innacurate. It applyies to non-beta too, it's applys to your phone itself. And Rev A doesn't not mean you've got an 8 GB iPhone 4.
Here's the correct way to identify your iPhone 4 GSM by model nummber (written on back of phone in tiny text, and in Settings > General > About):
If you cannot view that image properly copy and paste this Imgur link into a new tab/page/window:
http://i.imgur.com/IXQvhYc.png -
HT3529 What does "Unlimited" mean here, "iMessage allows you to send unlimited text..."?
"iMessage allows you to send unlimited text, photos, videos, locations, and contacts using Wi-Fi or cellular data* " What does "Unlimited" mean here, since as far as I can tell, you have to pay for a text plan and none of them are unlimited?
As long as you both have a data connection (either cellular or WiFi) the iMessage will be sent over the data connection and only use a tiny portion of your data allowance.
If the recipient of the message does not have a data connection, the iMessage may switch over to a standard SMS text message (if you have allowed that option in the Settings) - in which case you may be charged by your mobile network operator for the SMS as you would any other SMS you send.
Whether or not you are charged to receive SMS is something you'd have to ask your mobile network provider. -
What is the meaning of the black line in the Layer 2 View?
In the layer 2 View,there are many black line indicate "Ethernet 100M",what is the meaning?Does it mean the device is an end device that connected PC only?
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting. -
It says I've got 12,3 GB free space left, of my total 25GB. But my iPhone tells me there is no more space to take pictures or download stuff. It clearly says I have 12,3 GB left. What's the issue here??
The issue is probably space on the phone, not in your iCloud account. (Space in your iCloud account does not give you more space on your phone.) Check Settings>General>Usage at the top to see how much available space you have. If it's low, you'll have to delete or sync something off our phone to make room for more.
-
So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?
Wait a sec did this just start?
You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now. -
What is the meaning of this column in the pricing procedure?
Dear Gurus,
What is the meaning of this column in the pricing procedure?
thanks..subtotal field : Subtotal field is used to pass the value to some other field in PO .
for ex: using value 9 you pass the value to field komp-brtwr. so that this can be used in any other routine in the pricing procedure.
requirement field: if there is a scenario that condition type should come in pricing on some condition like vendor country is india. in that case use create the requirment and attached this requirement.in this requirment you put logic and set the sy-subrc value 4 or 0. -
What is the meaning of e system- jvm:infop=25a84f41,a='7.1.0.746',0='9.50.0.80',h=e000f03
what is the meaning of e system- jvm:infop=25a84f41,a='7.1.0.746',0='9.50.0.80',h=e000f03 when i press alt+L+G+L+G on my bb 9220 i have that situation,but when i press alt+L+G+L+G on the other device i come different situation.what i must to do?
deepspace wrote:
i2b converts form int tot byte.
If you don't use this instruction, the int will probably simply be chopped off at 1 byte.
The casting does this:
Narrowing Conversions: when an integer type is cast to another integer type of a smaller n number of bits, all but the n lowest-order bits, will be truncated.
Yes, if instructions that yields integer results, such as iload_<n>*, are not proceeded with an i2b* instruction then the bastore* instruction, for example, would truncate the 32bit word into 8bits. But what option is there anyway? Maybe not proceeding an instruction, such as iload_<n>*, with i2b* will cause the bastore* instruction to forcibly compress a 32bit word into an 8bit byte?
Please, if you would look at the output of the programs, that I discussed earlier in this post, you would notice the results are exactly the same, regardless to if the iload_<n>* instruction is proceeded with i2b* or not; it is analogous to the NOP*, No Operation, instruction used by microprocessors; however, conversely, the i2bmnemonic implies it actually performs a function. This is why I was questioning the pragmatic* reasoning behind it's usage. I just want to understand what is happening!
I have posted this question to 3 different developer sites, including java.sun.com/j2se forums, and HAVE YET to get a DEFINITIVE* answer. All I get is the obvious answer but that is my problem, isn't it OBVIOUS* that 32bits must be truncated to 8bits to fit into a byte? I could understand if i2* transformed the 32bit word in some way but as evidence by the programs I posted earlier this is not the case. The values I passed to thoses methods ranged from -255 to 255, inclusive!!! Should I use values ranging from java.lang.Integer.*MIN_VALUE* to java.lang.Integer.*MAX_VALUE*, inclusive, instead?
h4.
Please read the posting and look at the output and you will understand my conundrum
----- -
What is the meaning of "i" in apple products?
what is the meaning of "i" in apple products? i means "my" or any other answers?
iOS means iphone Operating System
so , iphone means my phone , internet phone or any other meanings?
Can any one please clear my doubt?
Thank you.http://www.quora.com/What-is-the-history-of-the-i-prefix-in-Apple-product-names
Cheers
Pete -
In CM01 selection screen, what is the meaning of "Operator"
Hello,
(1) In CM01 selection screen, there are 3 fields with column heading "Operator". There is no documentation available for those fields. Can someone help me understand what is the meaning and use of those 3 fields. Thanks.
(2) We are in the process of writing a wrapper program for CM01 - so that we have more detailed selection options and also download to Excel. Any help/suggestion for this is welcomed. Thanks.
- ChetanHi Chetan
the operator field is just to select your input values and it has these following options
and has no significance on the report
= equal to
<> not equal to
> Greater than
>= greater than/equal to
< less than
<= less than/equal to
EQ equal to
NE not equal to
GT Greater than
GE greater than/equal to
LT less than
LE less than/equal to
CP contains pattern
NP does not contain pattern
regarding downloading the report to excel file, it is a standard functionality and any ABAP developer should be able to add it to your report and if you plan to add some additional fields to make your report more details, you need to do some enhance ment and build a custom report depending on what you want to add
if helpful please reward your points -
Trouble with iMovie '11 transitions and themes? I'm running Lion, Mac OS X and just noticed today that the transitions and themes don't seem to be working at all when I start new projects or try to add to old projects. What is the solve here?
I've seen notes about clearing the cache but it seems that this is an older OS and I can't find the plist mentioned here because it's an older system. http://www.youtube.com/watch?v=2cL9RuDV3Qc
Thoughts? Anyone?GUYS, I NEED HELP !
ANYONE?
Maybe you are looking for
-
How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text. As an example, html widget has white background on iPad, and black on mac. The same goes for int
-
Don't know email, password, or birthday for Game Center ID; how do I sign in?
I created a gamecenter ID a long time ago separate from my Apple ID. I don't remember creating an email or birthday or anything, just a password, which I wrote down. Now when I try to view my account, that password doesn't work. I tried iForgot, but
-
does anyone know if it is possible to send a fce project in to idvd so i can show my work in best quality? if so is it straight forward or is it complecated?
-
Respected gurus, i have one issue in asset accounting,i.e,i have set a planned useful life for an asset ( book dep area) is 30 yrs,initially it was following slm after 10 yrs if you want to go for wdv,then what are the settings we have to do. thanks
-
When I try to run dashboard it does nothing, I can't install widgets, it won't do anything. When I try to install a widget I get a dialog box that pops up and go's away very fast and the dock restarts(also something called crashdump running while the