What is the meaning of Adobe?

I really don't know.

The name of the company, Adobe Systems Incorporated, was taken from the name of a creek (i.e., a very small river), Adobe Creek, that runs by the home of one of the founders of the company, John Warnock.
- Dov

Similar Messages

What is the meaning of the black line in the Layer 2 View?

In the layer 2 View,there are many black line indicate "Ethernet 100M",what is the meaning?Does it mean the device is an end device that connected PC only?

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

MM - PO - what is the meaning of this button?

Dear friends,
Could anybody help me with one question.
There is a strange button in a Purchasing Order on the Account Assignment tab page on this screenshot (it is marked with red color).
Screenshot below
http://content.foto.mail.ru/mail/raiden87/81/i-84.jpg
What is the meaning of this button? When it is used for?
I hope that anybody knows the meaning =)

hi raiden,
as for as i have gone through the issue I have come to know that:
If you want to use multiple account assignment for a line item in PO then at that moment you will have to first press the "repeat on " button. only after that multiple account button will be active that is just before your "repeat on " button.
Steps:
1:Save your PO.
2:Go to transaction code ME22N to change the PO.
(Here you will firstly see that the multiple a/c assignment button is firsty gray.It will become active only after when you press the "repeat on" button).
I hope It will be helpfull for you.
regards,
Aslam Ansari.

So I have an iPad with the smart cover, and it's usually supposed to turn on the iPad when u open it, but it's no doing that for me. Nor is it turning off without pressing the button. What is the meaning of this?

So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?

Wait a sec did this just start?
You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now.

What is the meaning of this column in the pricing procedure?

Dear Gurus,
What is the meaning of this column in the pricing procedure?
thanks..

subtotal field : Subtotal field is used to pass the value to some other field in PO .
for ex: using value 9 you pass the value to field komp-brtwr. so that this can be used in any other routine in the pricing procedure.
requirement field: if there is a scenario that condition type should come in pricing on some condition like vendor country is india. in that case use create the requirment and attached this requirement.in this requirment you put logic and set the sy-subrc value 4 or 0.

What is the meaning of e system- jvm:infop=25a84f41,a='7.1.0.746',0='9.50.0.80',h=e000f03

what is the meaning of e system- jvm:infop=25a84f41,a='7.1.0.746',0='9.50.0.80',h=e000f03 when i press alt+L+G+L+G on my bb 9220 i have that situation,but when i press alt+L+G+L+G on the other device i come different situation.what i must to do?

deepspace wrote:
i2b converts form int tot byte.
If you don't use this instruction, the int will probably simply be chopped off at 1 byte.
The casting does this:
Narrowing Conversions: when an integer type is cast to another integer type of a smaller n number of bits, all but the n lowest-order bits, will be truncated.
Yes, if instructions that yields integer results, such as iload_<n>*, are not proceeded with an i2b* instruction then the bastore* instruction, for example, would truncate the 32bit word into 8bits. But what option is there anyway? Maybe not proceeding an instruction, such as iload_<n>*, with i2b* will cause the bastore* instruction to forcibly compress a 32bit word into an 8bit byte?
Please, if you would look at the output of the programs, that I discussed earlier in this post, you would notice the results are exactly the same, regardless to if the iload_<n>* instruction is proceeded with i2b* or not; it is analogous to the NOP*, No Operation, instruction used by microprocessors; however, conversely, the i2bmnemonic implies it actually performs a function. This is why I was questioning the pragmatic* reasoning behind it's usage. I just want to understand what is happening!
I have posted this question to 3 different developer sites, including java.sun.com/j2se forums, and HAVE YET to get a DEFINITIVE* answer. All I get is the obvious answer but that is my problem, isn't it OBVIOUS* that 32bits must be truncated to 8bits to fit into a byte? I could understand if i2* transformed the 32bit word in some way but as evidence by the programs I posted earlier this is not the case. The values I passed to thoses methods ranged from -255 to 255, inclusive!!! Should I use values ranging from java.lang.Integer.*MIN_VALUE* to java.lang.Integer.*MAX_VALUE*, inclusive, instead?
h4.
Please read the posting and look at the output and you will understand my conundrum
-----

What is the meaning of "i" in apple products?

what is the meaning of "i" in apple products? i means "my" or any other answers?
iOS means iphone Operating System
so , iphone means my phone , internet phone or any other meanings?
Can any one please clear my doubt?
Thank you.

http://www.quora.com/What-is-the-history-of-the-i-prefix-in-Apple-product-names
Cheers
Pete

In CM01 selection screen, what is the meaning of "Operator"

Hello,
(1) In CM01 selection screen, there are 3 fields with column heading "Operator". There is no documentation available for those fields. Can someone help me understand what is the meaning and use of those 3 fields. Thanks.
(2) We are in the process of writing a wrapper program for CM01 - so that we have more detailed selection options and also download to Excel. Any help/suggestion for this is welcomed. Thanks.
- Chetan

Hi Chetan
the operator field is just to select your input values and it has these following options
and has no significance on the report
=     equal to
<>     not equal to
>     Greater than
>=     greater than/equal to
<     less than
<=     less than/equal to
EQ     equal to
NE     not equal to
GT     Greater than
GE     greater than/equal to
LT     less than
LE     less than/equal to
CP     contains pattern
NP     does not contain pattern
regarding downloading the report to excel file, it is a standard functionality and any ABAP developer should be able to add it to your report and if you plan to add some additional fields to make your report more details, you need to do some enhance ment and build a custom report depending on what you want to add
if helpful please reward your points

Could you tell me what's the meaning of the logfile-path and log-level?

we are running an productive xml database. but it is not stable now. Sometime it would report resource conflict error while you access xmldb via http protocol. I read the database logs and listener logs, but no abnormal message could be found. So, I want to find more information from the xmldb logs. While I run select DBMS_XDB.cfg_get().getclobval() from dual, I found that there are several logfile-path and log-level tags and I guess that these would be xmldb logs. Does anyone know what's the meaning of these tags?

I wondered about that one often too. I didn't have a chance yet to investigate (but maybe Mark will elaborate a little here), my guess is that it / or will be a possibility to enable tracing regarding the protocols or servlets.
Though It look like if you enable it it will trace to the XML file defined in the xdbconfig.xml. I also guess that (because there is also a XSD counterpart) that one could create an resource that streams the errors into a XDB ftp or http or ... xmltype table based on these settings.
This would be great because it would mature the protocol server regarding functionality. You could enable the tracing and see what happens. Until now the documentation doesn't give much extra insight...

<element name="ftpconfig">
<complexType><sequence>
<element name="ftp-port" type="unsignedShort" default="2100"/>
<element name="ftp-listener" type="string"/>
<element name="ftp-protocol" type="string"/>
<element name="logfile-path" type="string" default="/sys/log/ftplog.xml"/>
<element name="log-level" type="unsignedInt" default="0"/>
<element name="session-timeout" type="unsignedInt" default="6000"/>
<element name="buffer-size" default="8192">
<simpleType>
<restriction base="unsignedInt">
<minInclusive value="1024"/> 
<maxInclusive value="1048496"/> 
</restriction>
</simpleType>
</element>
<element name="ftp-welcome-message" type="string" minOccurs="0"
maxOccurs="1"/>
</sequence></complexType>
</element>

<element name="httpconfig">
<complexType><sequence>
<element name="http-port" type="unsignedShort" default="8080"/>
<element name="http-listener" type="string"/>
<element name="http-protocol" type="string"/>
<element name="max-http-headers" type="unsignedInt" default="64"/>
<element name="max-header-size" type="unsignedInt" default="4096"/>
<element name="max-request-body" type="unsignedInt" default="2000000000"
minOccurs="1"/>
<element name="session-timeout" type="unsignedInt" default="6000"/>
<element name="server-name" type="string"/>
<element name="logfile-path" type="string"
default="/sys/log/httplog.xml"/>
<element name="log-level" type="unsignedInt" default="0"/>
<element name="servlet-realm" type="string" minOccurs="0"/>
...etc...

What's the meaning of the various .bin files used by SAM?

hey everyone,
I'm trying to understand why exactly there are so many .bin files used by the SAM, and how to compile each one of them.
My .rc file for the simulation contains:
load bin reset.bin 0xfff0000000
load bin q.bin 0xfff0010000
load bin openboot.bin 0xfff0080000
load bin nvram1 0x1f11000000
load bin 1c1t-md.bin 0x100000
load bin 1c1t-hv.bin 0x180000
load bin disk1.img 0x1f40000000
I don't understand why I have 3 different files - reset.bin, q.bin and openboot.bin when I would have expected only one bootfile.
I also don't know what's the meaning of the 1c1t-md.bin file (what md stands for).
If anyone could clear this subject for me, and also point me to the sources of each such file (if they exist in the project, and assume they do, at least for most of them), I'd be grateful.
Thanks,
Mintz Yuval

Hi,
Sorry I haven't replied sooner.
I get your project now and it sounds pretty cool.
Let me answer your last question first. The service processor resides a separate motherboard running independently of the N2 processor. The SP and N2 processor communicate via a I2C link which allows the SP to read and alter the state of the N2. The cpu, caches, NIU, memory, etc. are all connected by this link. Once the N2 is running, the SP and the N2 firmware may exchange messages via a mailbox protocol over the I2C.
nvram1.bin is a configuration file that is OBP specific. On HW, it would be a little ROM that obp reads during the boot. Since it's in memory, SAM doesn't make any assumptions about it. You can remove it or rework it to suit u-boot.
disk.img is the contents of a virtual disk which contains the root filesystem. This is essentially a ram disk which has been added to SAM's version of the hypervisor and/or obp. On HW, the firmware does not support this kind of virtual ram disk. For SAM, I'm pretty sure that obp is extended to create a device tree node for the virtual disk. Hypervisor may not know about the virtual disk.
Since disk.img is a UFS (or other Solaris-oriented) filesystem, you will probably want to replace it with a ext3 or Linux-oriented filesystem. Since Linux has direct kernel support for ramdisk, you might be able to build/configure the kernel with the location of the root filesystem image in memory. Or this might be a u-boot option.
As to 1c1t*.bin and reset.bin. On HW, the service processor is responsible for discovering all the devices and cpus on a system and writing the machine description file (e.g. 1c1t*.bin) and the reset firmware (e.g. reset.bin). These files are used during boot and various resets to initialize or reinitialize machines state for the cpus and all the i/o devices. Since SAM doesn't include a service processor, these files are static and created completely outside of SAM. The md*.bin files contents must match the configuration of cpu's in the sam.rc file -- firmware will fail if it tries to run code on a strand that is missing.
The md and reset.bin files are used during the boot process to set-up CMT registers and do a little bit of i/o device initialization. SAM doesn't support reset modes such as warm reset.
I hope this helps. Let me know if you need me to track down more details.
Cheers,
Stephen

What's the Meaning of Dimension in SAP B1?

Sir,
What's the Meaning of Dimension in SAP B1? And how it is used in Profit Centre ?
plz tell me ......!

Hi,
Dimension - Dimensions configured in the system provide customers with multiple views of an expense and revenue analysis.
For further clarifications and use you can check the details in the following links :
Dimensions - Cost Accounting.
http://help.sap.com/saphelp_sbo881/helpdata/en/fe/9b2e5e66894e378d041732fcdd531a/content.htm
http://help.sap.com/saphelp_sbo881/helpdata/en/91/f6349f3c9047d5b91696c02ac6e9d6/content.htm
Hope it helps.
Kind Regards,
Jitin
SAP Business One Forum Team

What's the meaning of local PO, reservation?

Hi ,
I am new to SRM. I have small doubts. Please clarify these..
1. Create the sc with 4 line items like this:
i. line item one will be selected from the catalogue and will create a backend PO
ii. line item two will be selected from the catalogue and will create a local PO
iii.line item three will be entered manually and will create a backend PO
iv. line item four will be a product that was replicated earlier and will create a reservation in the backend.
I have to create a this type of SC.
My doubt is:
i. How i will come to know for this SC, PO will create in backend or PO will create in local??
What is the meaning of local PO??
ii. What's the meaning of reservation??
As per my knowledge if it is a stock item resevations created. but i am not understanding exactly.
Please explain me. I know these are very basic, but i am not understanding.
Thanks,
Visu

This may be better posted in a different forum.
I think in your case local = SRM, Backend = ERP (R/3, ECC).
Reservation in this context is a step before PO, you can create a reservation to simulate values, it can later be converted into a PO.

What's the meaning of "SID to Group returns null"

hi, I configure a ATN in WLS, and the ATN log shows:
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<returnConnection conn:LDAPConnection {ldap://localhost:389 ldapVersion:3
bindDN:"CN=weblogic,CN=Users,DC=mydavid,DC=org"}>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <LDAP Atn
Authenticated User weblogic>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<oneShotGroupMembershipLookup called for weblogic>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<activeDirectoryLookupTokenGroups called for weblogic>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<getConnection return conn:LDAPConnection {ldap://localhost:389
ldapVersion:3 bindDN:"CN=weblogic,CN=Users,DC=mydavid,DC=org"}>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<getDNForUser search("cn=Users,dc=mydavid,dc=org",
"(&(cn=weblogic)(objectclass=user))", base DN & below)>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <DN for
user weblogic: CN=weblogic,CN=Users,DC=mydavid,DC=org>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <No
groupname found for SID \01\02\00\00\00\00\00\05\20\00\00\00\21\02\00\00>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <SID to
Group returns null>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <No
groupname found for SID \01\02\00\00\00\00\00\05\20\00\00\00\20\02\00\00>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <SID to
Group returns null>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <Group
mapping found is Domain Users>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <SID to
Group returns Domain Users>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<returnConnection conn:LDAPConnection {ldap://localhost:389 ldapVersion:3
bindDN:"CN=weblogic,CN=Users,DC=mydavid,DC=org"}>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<oneShotGroupMembershipLookup returns with 1 groups>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <login
succeeded for username weblogic>
what's the meaning of "SID to Group returns null"?
\01\02\00\00\00\00\00\05\20\00\00\00\21\02\00\00 resprent for what?
Any one could tell me?
thanks.
david.turing

Hi
In AR, you will give cash discount to customer and not the other way round as you mentioned.
For eg if AR value is 100 and customer pays you 90, there is a difference of 10. Assume you have cash discount % of say 6%, you expect the customer to pay 94 (100- 6% of 100) and not 90. There is still a gap of 4. This can be added to cash discount account if you enter 4 in this field. Hence the A/c entry will be:
Dr Bank 90
Dr cash discount (expense/loss) 10
Cr Customer 100
However this field is interlinked with some other fields like "Cash discount per line item", etc
Jayaram

What is the meaning of managed groups of employees in OM?

Hi experts fellas,
What is the meaning of managed groups of employees in OM?
Thanks,
JEss..

Hey Jess
Let me try this one.
1. In general terms, group of employees of a department/division managed by one person (HOD).
2. In technical terms, the evaluation path which results in list of Employees who are Managed by a Position holding A012 relationship with Organizational Unit of the Person in question.
Both explaination are in regards to OM.
Regards
Yash

What is the meaning of "PSEUDO" and "NONE" in v$session table.

Hi
What is the meaning of "PSEUDO" and "NONE" in v$session table.
V$SESSION:
SERVER VARCHAR2(9) Server type (DEDICATED| SHARED| PSEUDO| NONE)
thanks
siva

PSEUDO is the server column's value of killed sessions, until they are cleaned up by PMON.
A dedicated server session will always have DEDICATED as server value, while a shared server session has SHARED when it's active, and NONE when it's inactive.

What is the meaning of Adobe?

Similar Messages

Maybe you are looking for