What is the meaning of 'Identifiers' in Party (Service With Party) ?

Hi friends,
When create 'Party' in B2B Scenarios (Integration Directory), XI shows 'Identifiers'. By default, whatever we created new party, it brings under
Agency: http://sap.com/xi/XI
Scheme: XIParty
Name: <newly created partyName>
It also allows to add further entries for these 3. Friend, could you kindly explain in brief i.e the exact use of these: Agency, Scheme, Name.
Thanking you,
Kind Regards,
Jeg

Please check this section
http://help.sap.com/saphelp_nw04/helpdata/en/e1/63e03fc2269615e10000000a155106/frameset.htm
Satish
Message was edited by:
Satish Renugopal

Similar Messages

What is the meaning of ABAP/4 editor integrated with ABAP/4 data dictionary

hi All
i want the correct meaning of the following sentence <b>"What is the meaning of ABAP/4 editor integrated with ABAP/4 data dictionary"</b>.If any onre knows kindly explain me...
thanks in advance...

Hi,
Abap is programming language in business, data dictionary is kind a interface for editor to retrive from database level to presentation area. its a meta data.
The ABAP Dictionarys integration with the rest of the development environment enables ABAP programs to automatically recognize the names and characteristics of dictionary objects.
Additionally, the system provides easy navigation between development objects and dictionary definitions. For example, as a programmer, you can double-click on the name of a dictionary object in your program code, and the system will take you directly to the definition of that object in the ABAP/4 Dictionary.
Reward points if helpful,
regards,
jinesh

What is the meaning, or significance, of the greyed out word "installed" next to the iBooks app icon in the iTunes list of apps on my new iPhone6, or slightly older iPad mini, retina display?

What is the meaning, or significance, of the greyed out word “installed” next to the iBooks app icon in the iTunes lists of apps on my new iPhone6, or slightly older iPad mini, retina display? Both devices have iOS8.0.2 installed. Both are having problems downloading some books that had been purchased previously for other devices. And, before installing iOS8, the full list of had been downloaded to the iPad mini with iOS7.
Finding out what the greyed outness means may help me figure out how to get all my books loaded on both devices. Any suggestions how to do that also would be appreciated.

Thank you. Your explanation of why the word "installed" is greyed out makes sense. But that raises the further question of why then is it shown at all. There are other apps on both devices that can not be removed,and they are just not shown. This is the only app that has the greyed out "install" notation. All of the other apps shown are either identified by "remove" meaning it is installed and can be removed; "install" meaning it is not installed but can be; or "update" meaning it has been replaced by a more current version which can be installed.
All of the books that I want to install have been on an iPhone4 that was replaced by the iPhone6, and were on the iPad Mini with iOS7 before iOS8 was installed. Installation of iOS8 on the iPad removed all of the books and only a few of them were later added by syncing with iTunes. Since most of the books I am interested in are free or of small cost, I would be happy to delete all of them from iTunes and then reinstall the ones I want directly on the devices. But I have not been able to delete them and when I try to install them on a device I am told that they already have been downloaded. Very frustrating.

What is the meaning of different fields of Oracle Software e.g 11.1.0.2.0

What is the meaning of different fields of Oracle Software e.g 11.1.0.2.0
Please share.

The first digit is the most general identifier. It represents a major new version of the software that contains significant new functionality.
Database Maintenance Release Number
The second digit represents a maintenance release level. Some new features may also be included.
Application Server Release Number
The third digit reflects the release level of the Oracle Application Server (OracleAS).
Component-Specific Release Number
The fourth digit identifies a release level specific to a component. Different components can have different numbers in this position depending upon, for example, component patch sets or interim releases.
Platform-Specific Release Number
The fifth digit identifies a platform-specific release. Usually this is a patch set. When different platforms require the equivalent patch set, this digit will be the same across the affected platforms.Check
Meaning of each number in version

What are the modules in which we can create a party site?

Hi Gurus,
I would like to know, what are the modules from which we can create a party site.
Please repond.
Thanks,
Venkatesh

Hi,
There can be numerous modules which create party sites , Leads/Quotes/Order/Recievable/HR/IB/ISupport etc.
Actual number of modules depend on the kind of implementation.
Run this query in your Oracle instance , to get an idea of various modules which has created Party sites in your system.
SELECT meaning,
description
FROM fnd_lookup_values
WHERE lookup_type = 'HZ_CREATED_BY_MODULES'
AND lookup_code IN (SELECT DISTINCT created_by_module
FROM hz_party_sites)
-Idris

What's the meaning of GSM Rev A for the iPhone 4?

What's the meaning of GSM Rev A for the iPhone 4?
I need to know, what does Rev A mean?!??!!

amy_lou wrote:
It's a certain type of the phone that determines which ipsw file you would download for beta versions of an iOS. The Rev A one means you've got an 8 GB iphone 4.
Both sentences here are innacurate. It applyies to non-beta too, it's applys to your phone itself. And Rev A doesn't not mean you've got an 8 GB iPhone 4.
Here's the correct way to identify your iPhone 4 GSM by model nummber (written on back of phone in tiny text, and in Settings > General > About):
If you cannot view that image properly copy and paste this Imgur link into a new tab/page/window:
http://i.imgur.com/IXQvhYc.png

What is the meaning of the black line in the Layer 2 View?

In the layer 2 View,there are many black line indicate "Ethernet 100M",what is the meaning?Does it mean the device is an end device that connected PC only?

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

MM - PO - what is the meaning of this button?

Dear friends,
Could anybody help me with one question.
There is a strange button in a Purchasing Order on the Account Assignment tab page on this screenshot (it is marked with red color).
Screenshot below
http://content.foto.mail.ru/mail/raiden87/81/i-84.jpg
What is the meaning of this button? When it is used for?
I hope that anybody knows the meaning =)

hi raiden,
as for as i have gone through the issue I have come to know that:
If you want to use multiple account assignment for a line item in PO then at that moment you will have to first press the "repeat on " button. only after that multiple account button will be active that is just before your "repeat on " button.
Steps:
1:Save your PO.
2:Go to transaction code ME22N to change the PO.
(Here you will firstly see that the multiple a/c assignment button is firsty gray.It will become active only after when you press the "repeat on" button).
I hope It will be helpfull for you.
regards,
Aslam Ansari.

So I have an iPad with the smart cover, and it's usually supposed to turn on the iPad when u open it, but it's no doing that for me. Nor is it turning off without pressing the button. What is the meaning of this?

So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?

Wait a sec did this just start?
You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now.

What is the meaning of this column in the pricing procedure?

Dear Gurus,
What is the meaning of this column in the pricing procedure?
thanks..

subtotal field : Subtotal field is used to pass the value to some other field in PO .
for ex: using value 9 you pass the value to field komp-brtwr. so that this can be used in any other routine in the pricing procedure.
requirement field: if there is a scenario that condition type should come in pricing on some condition like vendor country is india. in that case use create the requirment and attached this requirement.in this requirment you put logic and set the sy-subrc value 4 or 0.

What is the meaning of e system- jvm:infop=25a84f41,a='7.1.0.746',0='9.50.0.80',h=e000f03

what is the meaning of e system- jvm:infop=25a84f41,a='7.1.0.746',0='9.50.0.80',h=e000f03 when i press alt+L+G+L+G on my bb 9220 i have that situation,but when i press alt+L+G+L+G on the other device i come different situation.what i must to do?

deepspace wrote:
i2b converts form int tot byte.
If you don't use this instruction, the int will probably simply be chopped off at 1 byte.
The casting does this:
Narrowing Conversions: when an integer type is cast to another integer type of a smaller n number of bits, all but the n lowest-order bits, will be truncated.
Yes, if instructions that yields integer results, such as iload_<n>*, are not proceeded with an i2b* instruction then the bastore* instruction, for example, would truncate the 32bit word into 8bits. But what option is there anyway? Maybe not proceeding an instruction, such as iload_<n>*, with i2b* will cause the bastore* instruction to forcibly compress a 32bit word into an 8bit byte?
Please, if you would look at the output of the programs, that I discussed earlier in this post, you would notice the results are exactly the same, regardless to if the iload_<n>* instruction is proceeded with i2b* or not; it is analogous to the NOP*, No Operation, instruction used by microprocessors; however, conversely, the i2bmnemonic implies it actually performs a function. This is why I was questioning the pragmatic* reasoning behind it's usage. I just want to understand what is happening!
I have posted this question to 3 different developer sites, including java.sun.com/j2se forums, and HAVE YET to get a DEFINITIVE* answer. All I get is the obvious answer but that is my problem, isn't it OBVIOUS* that 32bits must be truncated to 8bits to fit into a byte? I could understand if i2* transformed the 32bit word in some way but as evidence by the programs I posted earlier this is not the case. The values I passed to thoses methods ranged from -255 to 255, inclusive!!! Should I use values ranging from java.lang.Integer.*MIN_VALUE* to java.lang.Integer.*MAX_VALUE*, inclusive, instead?
h4.
Please read the posting and look at the output and you will understand my conundrum
-----

What is the meaning of "i" in apple products?

what is the meaning of "i" in apple products? i means "my" or any other answers?
iOS means iphone Operating System
so , iphone means my phone , internet phone or any other meanings?
Can any one please clear my doubt?
Thank you.

http://www.quora.com/What-is-the-history-of-the-i-prefix-in-Apple-product-names
Cheers
Pete

In CM01 selection screen, what is the meaning of "Operator"

Hello,
(1) In CM01 selection screen, there are 3 fields with column heading "Operator". There is no documentation available for those fields. Can someone help me understand what is the meaning and use of those 3 fields. Thanks.
(2) We are in the process of writing a wrapper program for CM01 - so that we have more detailed selection options and also download to Excel. Any help/suggestion for this is welcomed. Thanks.
- Chetan

Hi Chetan
the operator field is just to select your input values and it has these following options
and has no significance on the report
=     equal to
<>     not equal to
>     Greater than
>=     greater than/equal to
<     less than
<=     less than/equal to
EQ     equal to
NE     not equal to
GT     Greater than
GE     greater than/equal to
LT     less than
LE     less than/equal to
CP     contains pattern
NP     does not contain pattern
regarding downloading the report to excel file, it is a standard functionality and any ABAP developer should be able to add it to your report and if you plan to add some additional fields to make your report more details, you need to do some enhance ment and build a custom report depending on what you want to add
if helpful please reward your points

Could you tell me what's the meaning of the logfile-path and log-level?

we are running an productive xml database. but it is not stable now. Sometime it would report resource conflict error while you access xmldb via http protocol. I read the database logs and listener logs, but no abnormal message could be found. So, I want to find more information from the xmldb logs. While I run select DBMS_XDB.cfg_get().getclobval() from dual, I found that there are several logfile-path and log-level tags and I guess that these would be xmldb logs. Does anyone know what's the meaning of these tags?

I wondered about that one often too. I didn't have a chance yet to investigate (but maybe Mark will elaborate a little here), my guess is that it / or will be a possibility to enable tracing regarding the protocols or servlets.
Though It look like if you enable it it will trace to the XML file defined in the xdbconfig.xml. I also guess that (because there is also a XSD counterpart) that one could create an resource that streams the errors into a XDB ftp or http or ... xmltype table based on these settings.
This would be great because it would mature the protocol server regarding functionality. You could enable the tracing and see what happens. Until now the documentation doesn't give much extra insight...

<element name="ftpconfig">
<complexType><sequence>
<element name="ftp-port" type="unsignedShort" default="2100"/>
<element name="ftp-listener" type="string"/>
<element name="ftp-protocol" type="string"/>
<element name="logfile-path" type="string" default="/sys/log/ftplog.xml"/>
<element name="log-level" type="unsignedInt" default="0"/>
<element name="session-timeout" type="unsignedInt" default="6000"/>
<element name="buffer-size" default="8192">
<simpleType>
<restriction base="unsignedInt">
<minInclusive value="1024"/> 
<maxInclusive value="1048496"/> 
</restriction>
</simpleType>
</element>
<element name="ftp-welcome-message" type="string" minOccurs="0"
maxOccurs="1"/>
</sequence></complexType>
</element>

<element name="httpconfig">
<complexType><sequence>
<element name="http-port" type="unsignedShort" default="8080"/>
<element name="http-listener" type="string"/>
<element name="http-protocol" type="string"/>
<element name="max-http-headers" type="unsignedInt" default="64"/>
<element name="max-header-size" type="unsignedInt" default="4096"/>
<element name="max-request-body" type="unsignedInt" default="2000000000"
minOccurs="1"/>
<element name="session-timeout" type="unsignedInt" default="6000"/>
<element name="server-name" type="string"/>
<element name="logfile-path" type="string"
default="/sys/log/httplog.xml"/>
<element name="log-level" type="unsignedInt" default="0"/>
<element name="servlet-realm" type="string" minOccurs="0"/>
...etc...

What's the meaning of the various .bin files used by SAM?

hey everyone,
I'm trying to understand why exactly there are so many .bin files used by the SAM, and how to compile each one of them.
My .rc file for the simulation contains:
load bin reset.bin 0xfff0000000
load bin q.bin 0xfff0010000
load bin openboot.bin 0xfff0080000
load bin nvram1 0x1f11000000
load bin 1c1t-md.bin 0x100000
load bin 1c1t-hv.bin 0x180000
load bin disk1.img 0x1f40000000
I don't understand why I have 3 different files - reset.bin, q.bin and openboot.bin when I would have expected only one bootfile.
I also don't know what's the meaning of the 1c1t-md.bin file (what md stands for).
If anyone could clear this subject for me, and also point me to the sources of each such file (if they exist in the project, and assume they do, at least for most of them), I'd be grateful.
Thanks,
Mintz Yuval

Hi,
Sorry I haven't replied sooner.
I get your project now and it sounds pretty cool.
Let me answer your last question first. The service processor resides a separate motherboard running independently of the N2 processor. The SP and N2 processor communicate via a I2C link which allows the SP to read and alter the state of the N2. The cpu, caches, NIU, memory, etc. are all connected by this link. Once the N2 is running, the SP and the N2 firmware may exchange messages via a mailbox protocol over the I2C.
nvram1.bin is a configuration file that is OBP specific. On HW, it would be a little ROM that obp reads during the boot. Since it's in memory, SAM doesn't make any assumptions about it. You can remove it or rework it to suit u-boot.
disk.img is the contents of a virtual disk which contains the root filesystem. This is essentially a ram disk which has been added to SAM's version of the hypervisor and/or obp. On HW, the firmware does not support this kind of virtual ram disk. For SAM, I'm pretty sure that obp is extended to create a device tree node for the virtual disk. Hypervisor may not know about the virtual disk.
Since disk.img is a UFS (or other Solaris-oriented) filesystem, you will probably want to replace it with a ext3 or Linux-oriented filesystem. Since Linux has direct kernel support for ramdisk, you might be able to build/configure the kernel with the location of the root filesystem image in memory. Or this might be a u-boot option.
As to 1c1t*.bin and reset.bin. On HW, the service processor is responsible for discovering all the devices and cpus on a system and writing the machine description file (e.g. 1c1t*.bin) and the reset firmware (e.g. reset.bin). These files are used during boot and various resets to initialize or reinitialize machines state for the cpus and all the i/o devices. Since SAM doesn't include a service processor, these files are static and created completely outside of SAM. The md*.bin files contents must match the configuration of cpu's in the sam.rc file -- firmware will fail if it tries to run code on a strand that is missing.
The md and reset.bin files are used during the boot process to set-up CMT registers and do a little bit of i/o device initialization. SAM doesn't support reset modes such as warm reset.
I hope this helps. Let me know if you need me to track down more details.
Cheers,
Stephen

What is the meaning of 'Identifiers' in Party (Service With Party) ?

Similar Messages

Maybe you are looking for