What is the meaning of "Item Created by Posting Interface" flag

I saw a flag checked in Display Document : Offsetting item window. Below is the F1 help of it. But still I didnot get the concept of this flag.
Item Created by Posting Interface
Use
Indicates that the G/L item is generated in the posting interface for Contract Accounts Receivable/Payable (FI-CA).
This indicator is required internally by the system in order to be able to execute all the activities necessary for resetting cleared items.
Examples
The following items posted during clearing carry this indicator:
Cash discount deductions
Other deductions within tolerances
Exchange rate differences
Tax adjustments
Also the field next to this flag contains one value and that field has below F1-help
Transaction key for account determination
Defines the type of automatic posting in question. These keys are defined in the system and cannot be changed.
Use
The transaction key documents the type of tax following transfer to General Ledger Accounting (FI-GL).
The transaction key is used by the system to determine the tax accounts to be posted to automatically.
Examples
MWS is used for output tax.
VST is used for input tax.
RDW is used for rounding amounts when clearing in an alternative currency.
BVR (formerly BUV) is used for company code clearing.
SKT is used for cash discounts.

Murtuza:
Certain processes generate postings above and beyond the entered information, eg. cash discounts or rounding etc. these internally generated items are posting relevant but were not entered by user/transaction. in this way that flag identifies the cause for the posting.
regards,
bill.

Similar Messages

What's the meaning of local PO, reservation?

Hi ,
I am new to SRM. I have small doubts. Please clarify these..
1. Create the sc with 4 line items like this:
i. line item one will be selected from the catalogue and will create a backend PO
ii. line item two will be selected from the catalogue and will create a local PO
iii.line item three will be entered manually and will create a backend PO
iv. line item four will be a product that was replicated earlier and will create a reservation in the backend.
I have to create a this type of SC.
My doubt is:
i. How i will come to know for this SC, PO will create in backend or PO will create in local??
What is the meaning of local PO??
ii. What's the meaning of reservation??
As per my knowledge if it is a stock item resevations created. but i am not understanding exactly.
Please explain me. I know these are very basic, but i am not understanding.
Thanks,
Visu

This may be better posted in a different forum.
I think in your case local = SRM, Backend = ERP (R/3, ECC).
Reservation in this context is a step before PO, you can create a reservation to simulate values, it can later be converted into a PO.

What is the best way to create a SSRS Report with Header Data and its associated child data

So I have Member Information...Member ID...Member Addressing...etc.. I want to display this in the top part of the report like...
Member Name:
Member ID:
Member Address Line 1:
And then below I want to report on all the claims associated with a Member ID that is chosen by the Parameter. Obviously the Claim Data will be in Table format. Do I necessarily have to associate the Member Information with the Claim Information or simply
use the same parameter? And what is the best Toolbox item to use to display the Member Information on top?
Any help or guidance is greatly appreciated by this newbie.
Thanks for your review and am hopeful for a reply.
ITBobbyP

Hi ITBobby,
According to your description, you want to display all Claim Data for each Member. Right?
In Reporting Services, we can use a table to display those Claim Data and make them group on Member ID. If you want to display the Member Information, we can put the data fields on parent group level. Then we can use create a parameter to filter the Member
ID we need. We have tested this scenario in our local environment. Here are steps and screenshots for your reference:
1. Create a DataSet(DataSet1) which contains the data fields of Member and Claim.
2. Create a table and drag the Claim data into the table.
3. In Row Group. Right click on Details and add a parent group.
4. Select Member_ID in Group by.
5. Right click on the textbox of Claim data. Select Insert Row->Outside of Group-Above. Drag the MemberName into the inserted row.
6. In Report Data, right click on Parameter-> Add Parameter.
7. Type Member_ID in Name and Prompt, select allow multiple values.
8. In Available Values, select get data from a query. Choose DataSet1, select Member_ID in values and label. You can also set this in Default Values if you need.
9. Save and preview.
Reference:
Understanding Groups (Report Builder and SSRS)
Report Parameters (Report Builder and Report Designer)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

MM - PO - what is the meaning of this button?

Dear friends,
Could anybody help me with one question.
There is a strange button in a Purchasing Order on the Account Assignment tab page on this screenshot (it is marked with red color).
Screenshot below
http://content.foto.mail.ru/mail/raiden87/81/i-84.jpg
What is the meaning of this button? When it is used for?
I hope that anybody knows the meaning =)

hi raiden,
as for as i have gone through the issue I have come to know that:
If you want to use multiple account assignment for a line item in PO then at that moment you will have to first press the "repeat on " button. only after that multiple account button will be active that is just before your "repeat on " button.
Steps:
1:Save your PO.
2:Go to transaction code ME22N to change the PO.
(Here you will firstly see that the multiple a/c assignment button is firsty gray.It will become active only after when you press the "repeat on" button).
I hope It will be helpfull for you.
regards,
Aslam Ansari.

What are the basic steps for creating a content repository?

I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
Paul

Hi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name               :           Anything you like
Description       :           Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory   : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager         :           AclSecurityManager
ACL Manager Cache   :           ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur

What is the meaning of this column in the pricing procedure?

Dear Gurus,
What is the meaning of this column in the pricing procedure?
thanks..

subtotal field : Subtotal field is used to pass the value to some other field in PO .
for ex: using value 9 you pass the value to field komp-brtwr. so that this can be used in any other routine in the pricing procedure.
requirement field: if there is a scenario that condition type should come in pricing on some condition like vendor country is india. in that case use create the requirment and attached this requirement.in this requirment you put logic and set the sy-subrc value 4 or 0.

What is the best way to create a database schema from XML

What is the best way to create a database schema from XML?
i have a complex XML file that I want to create a database from and consistently import new XML files of the same schema type. Currently I have started off by mapping the XSD into Excel and using Mysql for Excel to push into MySQL.
There must be a more .net microsoft solution for this but I cannot locate the topic and tools by searching. What are the best tools and way to manage this?
Taking my C# further

Hi Saythj,
When mentioning "a database schema from XML", do you mean the
XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
Create an XML Schema Collection basing on your complex XML, you can find
many generating tools online to do that.
Create a Table with the above created schema typed XML column as below.
CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

What is the best way to create CRUD datagrids

What is the best way to create CRUD datagrids that tell CF
components to update sql tables. I find that I'm having to vreate
all these columns with custom properites and its a bit of a chore:
<mx:DataGridColumn id = "NatWest" dataField="NatWest"
headerText="NatWest" editable="false"
wordWrap="true"
textAlign="right"
headerStyleName="centered"
labelFunction="price_labelFuncNatWest"
sortCompareFunction="price_sortCompareFunc">
I don't really want to use any wizards as I want control over
my code.

Hi Saythj,
When mentioning "a database schema from XML", do you mean the
XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
Create an XML Schema Collection basing on your complex XML, you can find
many generating tools online to do that.
Create a Table with the above created schema typed XML column as below.
CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

What is the best way to create shared variable for multiple PXI(Real-Time) to GUI PC?

What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acquisition, Stop data Acquisition) and I also want data from each PXI system to GUI PC display purpose. Can anybody suggest me best performance system configuration. Where to create variable?(Host PC or at individual PXI system).

Dear Ravens,
I want to control real-time application from host(Command from GUI PC to PXI).Host PC should have access to all 16 sets PXI's variable. During communication failure with PXI, Host will stop data display for particular station.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.

Could you tell me what's the meaning of the logfile-path and log-level?

we are running an productive xml database. but it is not stable now. Sometime it would report resource conflict error while you access xmldb via http protocol. I read the database logs and listener logs, but no abnormal message could be found. So, I want to find more information from the xmldb logs. While I run select DBMS_XDB.cfg_get().getclobval() from dual, I found that there are several logfile-path and log-level tags and I guess that these would be xmldb logs. Does anyone know what's the meaning of these tags?

I wondered about that one often too. I didn't have a chance yet to investigate (but maybe Mark will elaborate a little here), my guess is that it / or will be a possibility to enable tracing regarding the protocols or servlets.
Though It look like if you enable it it will trace to the XML file defined in the xdbconfig.xml. I also guess that (because there is also a XSD counterpart) that one could create an resource that streams the errors into a XDB ftp or http or ... xmltype table based on these settings.
This would be great because it would mature the protocol server regarding functionality. You could enable the tracing and see what happens. Until now the documentation doesn't give much extra insight...

<element name="ftpconfig">
<complexType><sequence>
<element name="ftp-port" type="unsignedShort" default="2100"/>
<element name="ftp-listener" type="string"/>
<element name="ftp-protocol" type="string"/>
<element name="logfile-path" type="string" default="/sys/log/ftplog.xml"/>
<element name="log-level" type="unsignedInt" default="0"/>
<element name="session-timeout" type="unsignedInt" default="6000"/>
<element name="buffer-size" default="8192">
<simpleType>
<restriction base="unsignedInt">
<minInclusive value="1024"/> 
<maxInclusive value="1048496"/> 
</restriction>
</simpleType>
</element>
<element name="ftp-welcome-message" type="string" minOccurs="0"
maxOccurs="1"/>
</sequence></complexType>
</element>

<element name="httpconfig">
<complexType><sequence>
<element name="http-port" type="unsignedShort" default="8080"/>
<element name="http-listener" type="string"/>
<element name="http-protocol" type="string"/>
<element name="max-http-headers" type="unsignedInt" default="64"/>
<element name="max-header-size" type="unsignedInt" default="4096"/>
<element name="max-request-body" type="unsignedInt" default="2000000000"
minOccurs="1"/>
<element name="session-timeout" type="unsignedInt" default="6000"/>
<element name="server-name" type="string"/>
<element name="logfile-path" type="string"
default="/sys/log/httplog.xml"/>
<element name="log-level" type="unsignedInt" default="0"/>
<element name="servlet-realm" type="string" minOccurs="0"/>
...etc...

What's the meaning of the various .bin files used by SAM?

hey everyone,
I'm trying to understand why exactly there are so many .bin files used by the SAM, and how to compile each one of them.
My .rc file for the simulation contains:
load bin reset.bin 0xfff0000000
load bin q.bin 0xfff0010000
load bin openboot.bin 0xfff0080000
load bin nvram1 0x1f11000000
load bin 1c1t-md.bin 0x100000
load bin 1c1t-hv.bin 0x180000
load bin disk1.img 0x1f40000000
I don't understand why I have 3 different files - reset.bin, q.bin and openboot.bin when I would have expected only one bootfile.
I also don't know what's the meaning of the 1c1t-md.bin file (what md stands for).
If anyone could clear this subject for me, and also point me to the sources of each such file (if they exist in the project, and assume they do, at least for most of them), I'd be grateful.
Thanks,
Mintz Yuval

Hi,
Sorry I haven't replied sooner.
I get your project now and it sounds pretty cool.
Let me answer your last question first. The service processor resides a separate motherboard running independently of the N2 processor. The SP and N2 processor communicate via a I2C link which allows the SP to read and alter the state of the N2. The cpu, caches, NIU, memory, etc. are all connected by this link. Once the N2 is running, the SP and the N2 firmware may exchange messages via a mailbox protocol over the I2C.
nvram1.bin is a configuration file that is OBP specific. On HW, it would be a little ROM that obp reads during the boot. Since it's in memory, SAM doesn't make any assumptions about it. You can remove it or rework it to suit u-boot.
disk.img is the contents of a virtual disk which contains the root filesystem. This is essentially a ram disk which has been added to SAM's version of the hypervisor and/or obp. On HW, the firmware does not support this kind of virtual ram disk. For SAM, I'm pretty sure that obp is extended to create a device tree node for the virtual disk. Hypervisor may not know about the virtual disk.
Since disk.img is a UFS (or other Solaris-oriented) filesystem, you will probably want to replace it with a ext3 or Linux-oriented filesystem. Since Linux has direct kernel support for ramdisk, you might be able to build/configure the kernel with the location of the root filesystem image in memory. Or this might be a u-boot option.
As to 1c1t*.bin and reset.bin. On HW, the service processor is responsible for discovering all the devices and cpus on a system and writing the machine description file (e.g. 1c1t*.bin) and the reset firmware (e.g. reset.bin). These files are used during boot and various resets to initialize or reinitialize machines state for the cpus and all the i/o devices. Since SAM doesn't include a service processor, these files are static and created completely outside of SAM. The md*.bin files contents must match the configuration of cpu's in the sam.rc file -- firmware will fail if it tries to run code on a strand that is missing.
The md and reset.bin files are used during the boot process to set-up CMT registers and do a little bit of i/o device initialization. SAM doesn't support reset modes such as warm reset.
I hope this helps. Let me know if you need me to track down more details.
Cheers,
Stephen

What's the meaning of "SID to Group returns null"

hi, I configure a ATN in WLS, and the ATN log shows:
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<returnConnection conn:LDAPConnection {ldap://localhost:389 ldapVersion:3
bindDN:"CN=weblogic,CN=Users,DC=mydavid,DC=org"}>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <LDAP Atn
Authenticated User weblogic>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<oneShotGroupMembershipLookup called for weblogic>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<activeDirectoryLookupTokenGroups called for weblogic>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<getConnection return conn:LDAPConnection {ldap://localhost:389
ldapVersion:3 bindDN:"CN=weblogic,CN=Users,DC=mydavid,DC=org"}>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<getDNForUser search("cn=Users,dc=mydavid,dc=org",
"(&(cn=weblogic)(objectclass=user))", base DN & below)>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <DN for
user weblogic: CN=weblogic,CN=Users,DC=mydavid,DC=org>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <No
groupname found for SID \01\02\00\00\00\00\00\05\20\00\00\00\21\02\00\00>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <SID to
Group returns null>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <No
groupname found for SID \01\02\00\00\00\00\00\05\20\00\00\00\20\02\00\00>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <SID to
Group returns null>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <Group
mapping found is Domain Users>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <SID to
Group returns Domain Users>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<returnConnection conn:LDAPConnection {ldap://localhost:389 ldapVersion:3
bindDN:"CN=weblogic,CN=Users,DC=mydavid,DC=org"}>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000>
<oneShotGroupMembershipLookup returns with 1 groups>
<2005-10-2 ????01??28??05?? CST> <Debug> <SecurityDebug> <000000> <login
succeeded for username weblogic>
what's the meaning of "SID to Group returns null"?
\01\02\00\00\00\00\00\05\20\00\00\00\21\02\00\00 resprent for what?
Any one could tell me?
thanks.
david.turing

Hi
In AR, you will give cash discount to customer and not the other way round as you mentioned.
For eg if AR value is 100 and customer pays you 90, there is a difference of 10. Assume you have cash discount % of say 6%, you expect the customer to pay 94 (100- 6% of 100) and not 90. There is still a gap of 4. This can be added to cash discount account if you enter 4 in this field. Hence the A/c entry will be:
Dr Bank 90
Dr cash discount (expense/loss) 10
Cr Customer 100
However this field is interlinked with some other fields like "Cash discount per line item", etc
Jayaram

What is the meaning of ONLINE index in sap

Hi sdn.
what is the meaning of ONLINE index in sap.
i got a req from sap to create a index with ONLINE so that no database lock happend

Cross post

What is the meaning of partition by statistics

Hi All
What is the meaning of partition by statistics ?
I could not grasp it meaning.
I have a fact table that has about 2.8 million records and around 8 dimensions
I currently am parititioning it by time as each time period has equal number of records

Murtuza:
Certain processes generate postings above and beyond the entered information, eg. cash discounts or rounding etc. these internally generated items are posting relevant but were not entered by user/transaction. in this way that flag identifies the cause for the posting.
regards,
bill.

Hi, when setting Safari, what is the meaning of "Open New Tabs in Background"? Thank you.

hi, when setting Safari, what is the meaning of "Open New Tabs in Background"? Thank you.

Previously, whenever you wanted to open a new browser window in mobile Safari, or whenever you tapped a link from within another app, Safari created a new page.
But in IOS 5 things have changed, you now have 'open new tabs in background, a great feature.
On any browser window that you have selected in Safari or any linked windows, you open Safari on iPad/iTouch or iPhone you have tabbed browser windows and can go to any of the sites without having to open up a new safari window.
It saves you time.

What is the meaning of "Item Created by Posting Interface" flag

Similar Messages

Maybe you are looking for