What is the medium of the emil in the output type?

what is the medium of the emil in the output type?
pleae send asap

Hi
For sending emails, you have to select either 5 or 7
5 is for sending emails through internet based emailing/sending emails thorugh the network
7 is for sending emails through SBWP in SAP itself, In this case, the emails will be send to the user ids in SAP, and the users can see their emails in SBWP tcode.
For 5,
you also have to maintain your SMTP settings in tcode SCOT. Your basis guy will help you in this.
Hope this helps you
You can reward if this helps you

Similar Messages

Scanning: The image size is too big. Please reduce the image height, width, resolution, scaling or output type.

Good Day.
I have recently discovered an issue with scanning. I have tried scanning straight from the printer, through image capture, and through preview. All yeilding the same results since they are essentailly kicking off the same scanning applet. I can scan a jpeg formatted file as long as I applet is in the "Hide Details" mode. If I click on the "Show Details" button, which I need to do to scan to PDF, I immediately receive an error stating: The image size is too big. Please reduce the image height, width, resolution, scaling or output type.
I'm currently using an HP C5180 printer.   The most recently installed software was Adobe Digital Editions (I installed this to read an on-line e-book). Not sure if there is any correlation.    Thanks for any help.
Mac details are:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Processor Name:          Intel Core i5
Processor Speed:          2.3 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27
Printer access log:
Source:          /var/log/cups/access_log
Size:          174 bytes
Last Modified:          11/21/12 10:09 PM
Recent Contents:          localhost - - [21/Nov/2012:22:09:16 -0500] "POST / HTTP/1.1" 200 61628 CUPS-Get-PPDs -
localhost - - [21/Nov/2012:22:09:20 -0500] "POST / HTTP/1.1" 200 61628 CUPS-Get-PPDs -
Image Capture Support:
Image Capture Support:
Path:          /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Info.plist
Version:          2.3.0
Path:          /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Resources/Dev iceInfo.plist
Version:          2.3.0
Photosmart C5100 series:
Status:          Idle
Print Server:          Local
Driver Version:          4.0.0
Default:          Yes
Shared:          No
URI:          dnssd://Photosmart%20C5100%20series%20%5B960B9E%5D._pdl-datastream._tcp.lo cal./?bidi
PPD:          HP Photosmart C5100 series
PPD File Version:          4.0.0
PostScript Version:          (3011.104) 0
CUPS Version:          1.6svn (cups-327)
Scanning support:          Yes
Scanning app (bundleID path):          -
Scanning app version:          -
Scanner UUID:          CC8DD435-CC8D-D435-CC8D-D435CC8DD435
Printer Commands:          ReportLevels
CUPS filters:
Inkjet:
Path:          /Library/Printers/hp/cups/Inkjet.driver/Contents/MacOS/Inkjet
Permissions:          rwxr-xr-x
Version:          4.0.0
commandtohp:
Path:          /Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/comman dtohp
Permissions:          rwxr-xr-x
Version:          2.1.1
Fax support:          No
Printer utility:          /Library/Printers/hp/Utilities/HP Utility.app
Printer utility version:          5.9.1
PDEs:
PDE.plugin:
Sandbox compliant:          Yes

Hello Sig
The scanner works with a Windows computer, which proves the device is functional at a cursory level. The drivers are now distributed by Apple and this is an Apple computer. There is no scanning software provided by HP. HP's answer is that Mountain Lion takes care of all of this. I anticipate that some setting or driver was somehow tweaked since the scanner had been working with Mountain Lion until a few days ago. The device in question is an Apple product. So, I'm pretty confident that I'm in the right place.
Regards

Reg: The invoices are not moving to corresponding output types. Status is y

Hi All,
I have created the invoice with the delivery based. But that invoice is not moved to corresponding output type. The status is showing yellow color for the particular output type. Even if i created the number of invoices for different deliveries. I am getting the yellow color only.
After seeing the all the invoices I think that one more step need to do to process that invoice as green color.
Can any body tell me the way to egt green color..

Hi,
Either use the program RSNAST00 to process the output type OR
Process the output type manually in VF02..VF02 -> Billing document -> Issue output to.
Thanks
Naren

Transmission Medium NACHA = '8' Special function-executing output type

hi All,
i have requirement that through the Transmission medium '8' i need to assign the custom program to store the Smartform as PDF in the desktop location or the location where the user selects.
if i assigned the transmision medium as 8 for particular output type say ZAP1 . the particular output type is not getting displayed when i try to use issue output option through va22.
any pointers will be highly appreciated.
thanks.

ok, if you set for your output type NAST-VSZTP=3 you can add code in your print program to display popup window in which
user specify own path for storing PDF...
but if output type will be created in background ( VSZTP ne 3) then
you must save PDF in server path...and user may download it by
cg3y...
regards, darek

What is the purpose of Output types for a particular FORM

Hi,
All
can any body explain me what an output type is for a form, and also why we use it and where we use it

hi,
Output types are represent how you want to output information. In SAP Script context it links the print program with SAP script. Output types are part of Output determination procedure which is linked to the application (e.g. Purchsing). Output types are also linked to Access sequence, which allows you to create condition records so that output types can be processed automatically.
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19884743b111d1896f0000e8322d00/frameset.htm

Search for the t-code where the specefic output type is used

Hi
I want to know how can we search for the t-code used for a specefic output type in use?
I have a requirement where in i have a output type, i knwo teh prog name and the form name...
i know it is used in SD and billing but i am not able ot exactly pin point as to in which t-code to be used..so that i can check the output throught the T-code.
Experts sugget!!
Thanks
Prashant

Hi
It is used for a Standard t-code i want to find that T-code. Through NACE the outputtype (which i already have) i can find teh prog name and the form name.
and through SPRO also its the same info...
i want to knwo for SD-> Billing->INvoice i can find the output type...i want to knwo what T-code needs to be run and on givign the data and running the out put type from the menu and choosing my OUTput type...and seeing the output in the print format.
Hope you got my problem.Thanks for the reply.
Prashant

WTA: How to use output type with medium T (Task)

Dear Gurus,
Can anyone shed some light how to use output medium T?
I tried one but at the end the output analysis says: Task T 50000125 is not available for object category BUS2032
My task clearly calling BUS2032 with method DELETEBILLINGBLOCK
Anyone can advise?
Please don't focus on the DELETEBILLINGBLOCK and suggest me workaround how to remove billing block.
It just my sample as I just anyhow select random method.
What I need to know is how to use medium T.
Thanks in advance.

Hello Erwin,
I know this is an incredibly old post, but I am wondering if you found a resolution to this issue. I have the same issue and cannot determine why I can see the enter in NAST for an output resulting from a condition record set as medium 9 with timing of 3. If I am in display mode of the sales order I can see it and also see the record in NAST. Like you, if I change the medium to Print, it proposes as expected in VA01, VA02, VA03. If I have the medium of 9, and change the timing to 4, my workflow process executes as expected.
Please let me know if you have any thoughts on how to resolve.
Thanks!
Jan

TS1436 I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

Hello Pat,
The following article provides troublehsooting steps and information that can help get iTunes burning discs again.
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
Cheers,
Allen

EDI - 753Routing Request and 754 Routing Instructions transactions- what SAP ECC6 EDI output type, msg type, msg code, basis idoc is best practice to generate the idoc?

One of our Trading Partner wishes to implement the 753 Routing Request and 754 Routing Instructions. Can anyone give me best practice answer the following Questions? We are on SAP ECC6 R3
What Application? i.e. V2, V7?
What output condition to use? i..e. LALE, LAT2, SEDI????
What Message type? i.e SHPADV?
What Basic Idoc Type? i.e SHPMNT05?
What Message Code? i.e. SHPM?
What Process Code? i.e. SHPM??
What Function Module? i.e. IDOC_OUTPUT_SHPMNT??
Does the SAP Transpotation Module have to be configured for this to be implemented?
Your comments are greatly appreciated, we have until Nov 1 to be compliant?

Good Morning,
While I did not get any responses from my question, yes, I was able to determine what needed to be configured. I hope the below will help you: This is for SAP ECC6
The output application for the 753 Routing Request is "V7"
The output type is "SEDI"
Transmission medium is "6"
The Basic Idoc type is "Shipmnt05"
when setting up your Partner Profile (WE20) add:Message Partner Role "SP" with Message type "SHPADV', Message coed "753", Basic Type "SHPMNT05", Message Control add Application "V7", Message type "SEDI", Process Code "SHPM".
also http://scn.sap.com/thread/698368 pages 14 and 15 were helpful.
I have not configured the Inbound 754. For now the inbound 754 Routing Instructions will be emailed to our traffic department.
Thank you,
Have a great day,
jane

Hi ALL, I need to control the temperature of a furnace. The Thermocouple ouputs are available as RS-485. What Hardware and system configuration should I prefer?

I need to automate the control of a gas carburising furnace. The available signals are Thermocouple K-Type (4 nos., one each from the three zones and one from the geometrical center of the furnace) and Oxygen Analyser. That makes it a total of 5 signals, all available in RS-485 format, which I need to acquire (10 samples/second) and then initiate a control action as per the rule base. Reliability is a major issue and the system has to work in harsh conditions.
What hardware would suit my purpose? I would prefer NI hardware which can be programmed via VB or VC++. LabVIEW may be considered as the last option.
Ap
art from using the thermocouple/Oxygen analyser signals for controlling it is also desired to store them on a PC for analyses and visualisation (via graphs etc etc)
My need is URGENT and would appreciate any help. Thanx in advance
Gurdas

Hi Gurdas,
I can give you some ideas to start with:
- a cheap solution - a rs232/rs485 converter(http://www.rs485.com/pconverters.html) and do the code in VB [you have to do both communication and data management)
- a medium solution - a AT-485 or PCI-485 NI board (I think that you'll get some NI libraries to control it from VB/VC++) [just data]
- a better solution - a LabVIEW or Measurement Studio with a NI 485 card in order to avoid wasting time with too much programming
- a much better solution - LabVIEW/Measurement Studio with an ENET-485 NI card (of course, you'll need a network passing by your lab :-))
Regarding harsh conditions, I think that rs485 allows you to stay far enough.
Hope this helps somehow.

RV120W: The user attempted to connect using a dial-in medium that did not match the restricted dial-in media

I am trying to configure a Cisco RV120W wireless using RADIUS. The IAS server is Windows 2003. The wireless client can’t access the wireless. The ISA server keeps getting this error: Event Type: Warning Event Source: IAS Event Category: None Event ID: 2 User: N/A Computer: DEVICES1 Description: User ntdomain\blin was denied access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.30.102 NAS-Identifier = Called-Station-Identifier = Calling-Station-Identifier = Client-Friendly-Name = RV102-Domain Client-IP-Address = 10.0.30.102 NAS-Port-Type = NAS-Port = Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = EAP EAP-Type = Reason-Code = 70 Reason = The user attempted to connect using a dial-in medium that did not match the restricted dial-in media. Check the dial-in constraints for the matching remote access policy. The public wireless and WPA2 work fine. Other Cisco 1240 wireless works fine with this event: Event Type: Information Event Source: IAS Event Category: None Event ID: 1 Date: 10/18/2013 Time: 1:33:19 PM User: N/A Computer: DEVICES1 Description: User blin was granted access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.20.103 NAS-Identifier = WLC2504 Client-Friendly-Name = WLC2504 Client-IP-Address = 10.0.20.103 Calling-Station-Identifier = 90-18-7c-e6-95-aa NAS-Port-Type = Wireless - IEEE 802.11 NAS-Port = 1 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = PEAP EAP-Type = Secured password (EAP-MSCHAP v2) Can you help?

Dear Customer,
Thank you for reaching the Small Business Support Community.
The RADIUS configuration settings are intended to authenticate the wireless clients attempting to connect through a SSID and if this is the problem you have, I first suggest you to check on the RADIUS server IP address (Security>RADIUS Server), make sure it is reachable, and the authentication port number used by this server to send traffic and the shared key used to authenticate to the server which must match on both sides. If all that is good, try using WAP Enterprise as the wireless security method and not WAP2 Enterprise.
If the problem persits I then first suggest to to make sure you run the latest firmware release version 1.0.5.6;
http://software.cisco.com/download/release.html?mdfid=282981372&flowid=796&softwareid=282487380&release=1.0.5.6&relind=AVAILABLE&rellifecycle=&reltype=latest
Then contact support if the problem persists; (the "dial-in medium" part error I just don't understand what it has to do with the RADIUS wireless client authentication);
https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport
Please do not hesitate to reach me back if there is any further assistance I may assist you with in the meantime.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Special function as the medium

Hi
Want know what is special function. I know custom output type like zdel, i went NACE and seen procceing routins for zdei
In process rouined i have seen custom program name it looks like a rouine, in the routine used actually cutom FM to create invoice and this was assigned to 8(special function) as the medium.i want to know why they used special function and what is the use of special fumction and as well as want know where to used this program.
Thanks for ur reply

Hello Friend,
Special function in output type used when you do not want Print, Mail OR send Iand DOC
You want to download he whole document as text file or XML file...
You wan to call a RFC to coomunicate with another system like this
Thanks,
Krish

What are the output type and Tcodes?+

What are the output type and Tcodes?

hi,
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
regards
siva

Why I can not get the medium crate of gold

I need to ask why I buy medium crate of gold in the contract killer : zombies 2 I can not get it can help me check what happen

What happens when you try to buy it ? If you are getting a message to contact iTunes support then you can do so via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then try selecting Purchases, Billing & Redemption

What is the purpose of the black line on top of the screen in the latest version of iBooks for iPhone? It irritates me.

It has been around for a while. Like for the last 2-3 versions of the app.

Could you use the camera icon to post a screenshot here of what you are talking about?
Nobody in these forums represents Apple, so you can't get answers about why apps work the way they do. But you can ask for changes via
http://www.apple.com/feedback

What is the medium of the emil in the output type?

Similar Messages

Maybe you are looking for