What is the message type we can take for Payroll system

Hi All,
what is the message type we can take for Payroll system

Hi
I feel that you are talking about IDoc Message Types..
HROT_CA                        HR: Outsourcing - Canadian Payroll            
HROT_CM                        HR: Outsourcing - Canadian Master Data Payroll
HROT_US                        HR: Outsourcing - US Payroll                  
HROT_XX                        HR: Outsourcing Payroll International         
HRTRPR                         Transfer TRV-PAY(PayrollTravelExpenses)       
MANAGEREXTPAYROLL_INSERTLEGACY Transfer payroll account                      
MANAGEREXTPAYROLL_INSERTOUT    Update of a payroll result using an outsourcer
these are the available Message type for payroll...
hope you are talking about IDoc message type for Payroll...
vijay

Similar Messages

  • What is the message type and basic type used for catsdb in idoc help me

    what is the message type and basic type used for catsdb in idoc help me
    ANY IDOC FOR CATSDB PLEASE TELL,
    Regards,
    Jagrut BharatKumar Shukla
    points will be awarded

    Hi,
    Check these message types.
    ATT_ABS_WITH_COST and WORKSCHED_WITH_COST.

  • Idoc MBGMCR02 what is the message type

    what is the message type for idoc MBGMCR02?

    I guess my real question is where do i go to set up a new partner.  I think it is SALE but then i am not quite sure what to do there.
    I think i need to set up new partners for outbound and inbound processing.  then i need to go into we20 and use the MBGMCR message type to be able to be exchanged. 
    Am i correct
    and is there a place where it tells how to use transaction sale to set up new partners?

  • What is the message type in a bindingFault?

    I have an invoke that sometimes gets a bindingFault that I'd like to catch. What is the message type for the fault variable of a bindingFault? More generally, where does one go to find the message type for any of the standard system faults?
    Bret

    Search you drive for RuntimeFault.wsdl. Add this to your project and create a variable based on that message type
    Pete

  • What does the message -  "i phone can not used because the apple mobile device is not started " mean

    what does the message -- "i phone can not be used because the apple mobile device is not started" mean

    Type "apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting help articles.

  • What are the message types available for Vendor Address?

    Hi Everybody,
    I need to read the all the change pointers of Vendor Address using the function moudle 'CHANGE_POINTERS_READ'. To call this FM  I need to pass Address's Message Type. I am passing ADRMAS as message type. but i am not getting any records into change pointers internal table.
    Pls help me out by informing the message type of Vendor Address.
    Regards,
    Nagaraju Maddi

    Hi,
             The address group is in the segment E1BPAD1VL1-ADDR_GROUP.
    Check the table <b>TSAD7 for Address groups</b> (central address management)
    <b>Reward points</b>
    Regards

  • What are the query types,Objects CRM provides for third party

    What are the query types,Objects provided by the CRM so that it can be called by third party for integartion pupose.

    First, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
    You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
    Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
    can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
    Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
    DevBiker (aka J Sawyer)
    Microsoft MVP - Sql Server (StreamInsight)
    If I answered your question, please mark as answer.
    If my post was helpful, please mark as helpful.

  • What is the message types(cross applications)  for postgoods issue(outboun)

    Hi ,
    please provide what is the messagetypes for POST GOODS ISSUE(OUTBOUND)
    AND GOODS RECEIPT(INBOUND).
    Thanks,
    sriii

    Hi,
    Message type ACPJMM ( message B1003)
    Refer the following post.
    Outbound IDOC for goods movement
    Regards,
    Jagadish

  • What is the best type of xml storage for max performance in 9i r2

    We have many schema based xml's of 1MB in xdb (9.2.0.5)
    and our database is getting slower by every new xml
    delete_resource (300 sec) and create_resource (300 sec ) take a long time
    and if I ftp a schema based xml out the xdb takes a long time ( 200 sec )
    Our system works like this , the xml comes in (ftp) ,the xdb validates the xml and then the xml is archived and the
    last step, the xml data is extracted and put in normal tables
    no xml updates or xml constraints
    I have now defined in the schema, one main table and I use oracle types for complextypes and xdb:defaulttable =""
    in 10g I don't have problems, but our production system
    are 9.2.0.5 and it takes a lot work and downtime to change that
    This goes well in 9i by files smaller then 500k
    what is the best schema configuration for max performance ( create / delete resource and ftp out )
    thanx edwin

    I changed
    maxOccurs="unbounded" xdb:SQLName="TRANSACTIONRANGE" xdb:SQLCollType="TPF_MASTER_D_T_RANGE_COLL_01"
    into
    maxOccurs="unbounded" xdb:SQLName="TRANSACTIONRANGE" xdb:SQLInline="false" xdb:defaultTable="TPF_MASTER_D_T_RANGE_TAB"
    this gives me very good performance
    the total run is now 6 times faster
    and to ftp xml out of the xdb takes now 2 seconds

  • What is the Function Type in Oracle Applications for UIX pages?

    Hi,
    In the Oracle forms function window (under the System Administrator responsibility) there is a field call function type. The selection does not have UIX but it does have JSP. Should the function type be set as JSP if I'm referring to a UIX page?
    Thanks,
    Merced

    Hi,
    this forum is about Oracle Forms. Try the JDeveloper forum
    JDeveloper and ADF
    Frank

  • What version of Windows Office will work for my OS X 10.5.8; also what is the most up-dated browser available for my system?

    What version of Windows Office will work for my OS X 10.5.8, and also what is the most updated browser available for my system?

    Sorry for my typo. Ofice 2008 will continue to run on Leopard and Leopard includes Safari 5.0.6. A G4 s an old machine and you will not get much speed when surfing the internet.
    Leopard is no longer avilable from Apple, and costs around $200 on eBay or Amazon.

  • I have a Mac 10.2.8 and Firefox 2.0.0.20. What is the highest upgrade I can get for this Mac because I don't want to have to upgrade my Mac or buy a new one?

    I can't access certain links from sites, especially with a lot of graphics. I get messages to the effect that I need to upgrade my browser. But then the update says I need a 10.3 Mac or higher. Also any site with a lot of graphics takes forever to download. Is there an intermediate update that I could use instead for my Mac?

    For Mac 10.2.8 you need Firefox 2.0.0.20 as Firefox 3 will NOT RUN on your Operating System.
    Download Firefox 2.0.0.20 from HERE.... http://www.mozilla.com/en-US/firefox/all-older.html
    Follow THESE Instructions to Install... http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
    BUT This is scheduled to be the LAST release of Firefox 2, so you will need to upgrade youur computer to receive further updates.

  • What is the latetest iPhone I can use for a pre paid phone plan

    I want to buy a phone and pre-pay month to month. Everyone says I can't but my X-wife, my daughter and my granddaughter all have that type of service.

    That depends on where you are and what carrier you want to use.
    In the US, there are no supported GSM carriers that offer pre-paid service for the iPhone. There are a number of CDMA carriers that do, but you must purchase a phone specifically for their network.

  • What is the best type of data structure for this type of data?

    Animal --> (List of types like Mammal, Reptile, etc)
    Mammal --> (List of families)
    Etc.
    So basically there is a key then a list of other keys with more items.
    At first I thought a Map<String, Map<String, Map<String,...etc but the number is unknown so I'm not sure how to structure it.

    I'd just use a flat Map<String,String> and stick all categories in that

  • What is the highest ios i can get for an iphone 3?

    im trying to find out if my iphone can have the ios updated to 7.0 or higher because i want the yahoo sports fantasy football app and i cant get it without ios 7 the site says.

    iPhone 3G = 4.2.1
    iPhone 3GS = 6.1.6.

Maybe you are looking for

  • How do I Resolve This Problem?

    When I start up my Pavilion g6 it says "SMART Hard Disk Error" "The smart hard disk check has detected an imminent failure. To ensure not data loss, please backup the content immediately and run the hard disk test in system diagnostics." But when I P

  • Copy a text layer to another image in the same location

    I am trying to find a way to copy a text layer in one image to another image of the same size so that the text layer is in the exact same location. Basically I have two images for a rollover button for a website. What is the easiest way to copy a tex

  • Why can't I delete mail from my iPad?

    I can delete about ten of the messages but after that the edit/delete button doesn't work and sends me out to the first page where all the icons are.  And when I get to the first page, the mail icon still has the same number of incoming mail listed. 

  • Count the no. of items in a block by giving a WHERE CLAUSE

    I have a Form in Developer 2000. In that form there is a block. The block contains 3 columns -- trdate, subcode and wcode wcode=F stands for Friday. According to the rule here, if a worker is absent (subcode=AB) for 2 days in a week the program shoul

  • How to identify which application users are connected to in an rdp session

    so we have an rdp gateway with couple of servers acting as brokers. users connect to the RD web access site and see a list of applications. usually these applications are the same but with different parameters like (done through the RemoteApp manager