What is the min required firmware for axiom 600 stroage?

what is the min required firmware for axiom 600 storage?

Hello,
I'm not sure that we really have a minimum required FW version, however I will let my colleagues correct me if I'm wrong. What we have is a recommended FW version (see the document below).
However, you can have a look at the following documents that might help you to understand what is the release mechanism as well as understand what is the latest release available for your Axiom 600:
Pillar Axiom: Software/Firmware Releases Mechanisms (Doc ID 1530588.1)
Pillar Axiom: Current Recommended Software Versions (Doc ID 1558848.1)
Regards
Nicolas

Similar Messages

  • BAPI_SHIPMENT_COST_ESTIMATE  What are the min. required parameters to pass

    Hi All,
       I would like to know what are the minimum required  parameters to pass in BAPI BAPI_SHIPMENT_COST_ESTIMATE. And from which tables I can pull out that information to pass to this BAPI.
    Does this BAPI creates a shipment cost document in the system or just shows the estimate of the shipment cost.
    If it creates a shipment cost document then its good for me. but if it shows us just the estimate does it shows estimate for each delivery (total Qty, Unit Price & Total Price). 
    What will be the item category it will pick. I like to see it picks  basic price related item category.
    Does any body has used this bapi ?
    Appreciate your fast reply.
    Regards,
    Leona

    Hello, I´ll try to answer your question:
    1. is it possible to run the bapi without actual shipment number and the shipment ( & cost ) will be created in simulation mode ?
    I think that the bapi only run with external shipment number and only run in simulation mode, that´s mean the bapi can not create any shipment and cost document, if you want to create a shipment use BAPI_SHIPMENT_CREATE, to create a cost document I don´t know if there is a bapi but you can create easily with transaction VI01 (batch-input)
    The shipment number that you use to call the bapi is a ficticious number always between external range indicated in field V_TVTK-NUMKE with the shipment type that you use.
    2. is it possible to perform estimation to inbound shipments ?
    Yes it´s depend on the shipment type. In standard system 0010 is used
    In the example that I have I use an inbound delivery
    3. does the bapi creates shipment and scd in simulate mode like transaction VICI ( from sales order ) ?
    I think that the bapi only run in simulation mode and it can not create any document
    4. is there any problem if i customized my scd item categories to open manualy ?
    I think that the bapi needs to work properly automatic iten categories
    can you please post sample code ( or any other doc's ) for this bapi ?
    I send you a document with an example if you give me an e-mail because I don´t know how to attach a word document
    Best regards,

  • So what about the pormised N2G firmware for Xtra/touch us

    So 2nd round of firmware for Micro users, still nothing for the rest of us. i believe something was promised late st quarter. It can't get much later. I am about ready to put my xtra up for sale to buy something that will work with it. I am a dj and download a lot of tunes from N2g and it makes no sense no to be able to use them. Can someone please provide us with something more than"It's coming, will let you know when we know more"

    its actually the 4th i think...
    )there was the first one to fix to the battery etc
    2) n2g beta
    3) volume make all nice etc
    4. New beta for n2g

  • I need to purchase a newer used apple computer so I can run Firefox 8. What are the min. system requirements to ron Firefox 8.

    I need to purchase a newer used apple computer in order to run Firefox 8, what are the min. system requirements?

    Here are the [http://www.mozilla.org/en-US/firefox/8.0/system-requirements/ System Requirements] for Firefox 8.

  • What is the best export settings for mini DV?

    Hi folks,
    Love this forum, it has been a huge help for a novice.  I am looking for answers to a more tailored question.  I believe this will help others too!
    What are the best export settings for mini DVs (now in mov format) for the following uses and how do I input these settings:
    1. archive an exact duplicate without any quality loss of an imported mini DV tape.  My goal is to have the best quality/duplicate archived digital version of the original mini DV tape for later editing/use?
    2. the best quality version of the mini dv tape for viewing on media devices such as WDLive, boxee box, pivos xios, etc?
    I really appreciate you reading and considering response.

    First, I do NOT write back to tape... so only have a few saved links with no personal experience... but my "general" understanding is that you simply play your timeline with Firewire output active and press the record button on your tape deck
    2nd, read below for a "trick" that is required to export to tape
    Export to Tape http://forums.adobe.com/message/4699448
    Hardware MPE must be OFF to be able to export via Firewire
    http://forums.adobe.com/thread/902499
    http://forums.adobe.com/thread/880824
    Also CS6 http://forums.adobe.com/thread/1016269

  • What are the settings required for QM in procurement

    Hi Team,
    What are the settings required for QM in procurement. I have  set indicator for QM in procurement in QM view in material master.
    I am not clear about  following fields to be maintained in QM view.
    QM Control Key
    Certificate type
    Target QM system
    Tech. delivery terms Indicator.
    Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
    Thanks

    Hi,
    All meaning are
    QM Control Key :
    If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
    Certificate type :
    Certificate types applies to the Certificate processing in procurement  &  Certificate creation
    Target QM system :
    whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
    -  If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
    -  If you want Vendor's perticular certificate for Material then you have to define Certificate type.
    Also, you have to maintain Material, Vendor's Info record at plant level.
    Thanks,
    JM

  • HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

    What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

    Hey guys,
    I found out an answer by myself...
    The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
    In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

  • My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

    My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

    Hello Pushtheriver,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iCloud storage issues:
    Get help using iCloud storage
    This may also help:
    Understanding iOS device capacity
    You can sync and download many different types of content on your device. Some types of content (such as music and videos) typically take more space than others (such as notes and books). The amount of space taken by an app depends on the app's purpose; complex or graphically intense apps usually take more space than simpler apps.
    If your device is near its capacity, you can remove some of the less used content to make room for more.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • What are the Things required for BI 7.0 Implementation project

    Hi Friends,
                      Can any one suggest me
    1.What are the Things required for BI 7.0 Implementation project?
    2.System Configurations & Hardware Components?
    3. Any additional steps...
    plz suggest me.
    Regards

    Hi lakshmi,
    http://csc-studentweb.lrc.edu/swp/Berg/articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt#426,3,Why Upgrade u2013 end of supportu2026
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
    https://wiki.sdn.sap.com/wiki/x/JYk
    Check the following links.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    check the following
    http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
    business content
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
    https://websmp203.sap-ag.de/co
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

  • What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

    Hi Folks,
    Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
    Thank you.

    In case you don't have access to MOS :
    JBOSS : 5.1.2 EAP
    JDK : 1.6.0_38
    ORACLE :
    Oracle Exadata5
    Oracle 10gR2 (10.2.0.3)
    Oracle 10gR2 RAC (10.2.0.3)
    Oracle 11gR2 (11.2.0.2.0)
    Oracle 11gR2 RAC (11.2.0.2.0)

  • What are the infotypes required for maintaining benefits....

    Hi
    Please help ...
    What are the ingotypes required for maintaing benefits....

    Hi Srikanth,
    Please find below the list of Infotypes required for maintaining benefits:
    1. General Benefits Information (Infotype 0171)
    2. Adjustment Reasons (Infotype 0378)   
    3. Health Plans (Infotype 0167)  
    4. Insurance Plans (Infotype 0168)  
    5. Savings Plans (Infotype 0169)  
    6. Flexible Spending Account (Infotype 0170)  
    7. Miscellaneous Plans (Infotype 0377)  
    8. Family/Related Person (Infotype 0021)
    There are also other benefits infotypes e.g. Stock Purchase Plans (Infotype 0379), Credit Plans (Infotype 0236) and many COBRA and retirement plan infotypes but these are used based on the company requirement.
    I hope this helps.
    Regards,
    Anand Jalan
    Edited by: Anand Jalan on Jan 6, 2010 9:50 PM
    Edited by: Anand Jalan on Jan 6, 2010 9:52 PM

  • What are the jars required for prepare portlet tool?

    what are the jars required for prepare portlet tool which converts portlets to .portlet.

    HI
    you will  have to create manager as portal role and assigned to them  necessary worksets containing necessary worksets  look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions  and applications you need to do it .please do not forget to give points
    with regards
    subrato kundu

  • What are the roles required for MSS

    What are the roles required for MSS in R/3.
    I have created ESS roles. But need to find for MSS.
    I am able to see the PERNR in ESS on portal which created in R/3.
    I need to get my staff on portal.
    What config is required for this.
    MSS User.

    HI
    you will  have to create manager as portal role and assigned to them  necessary worksets containing necessary worksets  look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions  and applications you need to do it .please do not forget to give points
    with regards
    subrato kundu

  • What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

    Hi All,
    What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
    Client Type
    Port range  and Protocol required for Audio
    Port range and Protocol required for
    Video
    Port range and Protocol required for
    A/Vconferencing
    Windows Desktop   Client
    Windows mobile App
    Iphone
    Ipad
    Andriod phone
    Andriod Tablet
    MAC desktop client
    Please advise. Many Thanks.

    Out of the box, 1024-65535 for all of the client ports.  :) 
    https://technet.microsoft.com/en-us/library/gg398833.aspx
    You'll want to tune your client ports a bit
    https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings.  I'm not sure the mobile clients respect that setting.
    Elan's got the best writeup for Windows clients here:
    http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
    However, the marking of the packets is the tricky part.  Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings.  You have to do it based on ports
    as the traffic could be peer to peer.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • What are the Trading Card Games for iPod touch that doesn't requires Internet connection?

    What are the Trading Card Games for iPod touch that doesn't requires Internet connection? Suggestions, please.

    Why not look at the apps and fine out?
    The odds of someone here knowing that are slim to none.

Maybe you are looking for