What is the minimum iOS version that Apple Configurator is supported with?

I have a few very old iPads, not even iPad 2's.  I am considering using Apple Configurator to supervise them.  What is the minimum iOS these iPads need to be at to supervise the ipad

See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1
iPhone 4                                      iOS 6.1
iPhone 4S                                    iOS 6.1
iPhone 5                                      iOS 6.1
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1
iPod Touch 5                               iOS 6.1
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1
iPad 3                                          iOS 6.1
iPad 4                                          iOS 6.1
iPad Mini                                     iOS 6.1

Similar Messages

  • What is the minimum baud rate that PXI 8461 CAN support

    what is the minimum baud rate that pxi 8461 CAN support

    Hi,
    The PXI-8461 is the high speed CAN. The minimum baud rate is 5kBits/s. Refer to the following Knowledge base article:
    CAN Physical Layer Standards: High-Speed vs. Low-Speed/Fault-Tolerant CAN
    Hope this helps.
    DiegoF.
    National Instruments.

  • What is the  Highest iOS Version a 2nd Generation Ipod can attain to?

    I What is the  Highest iOS Version a 2nd Generation Ipod can attain to?

    It's version 4.2.1. There actually was an iOS 4.3.1, but it won't run on that model.
    (66226)

  • What is the minimum permission level that allows users to view draft documents, other peoples' draft documents?

    What is the minimum permission level that allows users to view draft documents, other peoples' draft documents?
    Normally a person creates a draft document and when they are ready they publish it and the Approver approves it. However, what if a power user needs to be able to see all draft documents. Not just their own but other peoples'. What is the minimum permission
    level that allows then to do this?
    Cheers,
    Mark
    Learning SharePoint

    Hi Mark,
    Per my knowledge, there is no minimum permission level that allow users to view their own and other people’s draft documents.
    This is based on the Draft Item Security setting you choose for your list in Versioning Settings:
    You can follow the detailed steps in the link provided by Avni.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • What is the latest IOS version for my ipod

    What is the lastest IOS available for my Ipod?

    If it's a first generation model, 3.1.3.
    If it's a second generation model, 4.2.1.
    If it's a third generation model, 5.1.1.
    Otherwise, 6.1.3.
    (81365)

  • What is the highest Firefox version that can now be downloaded on to my Mac OSX version 10.5.8?

    When I open the "Firefox" window on my computer, and then click on"About Mozilla Firefox," I read "Firefox Version 3.6.23." I assume this is the version operating now on my computer. If it isn't, because of later updates, how can I find out what the version now operating on my computer is? What is the highest compatible version I can download, and how?

    It looks like you have a "Power PC" Mac. The last version of Firefox to support PPC Macs is 3.6. You can try [http://www.floodgap.com/software/tenfourfox/ TenFourFox]. It's a port of the latest Firefox made for PPC Macs. It's not made by Mozilla but many PPC users are happy with it.

  • What is the most recent version of Firefox which is compatible with a PowerMac G5 (PPC) running OS X 10.5.8?

    Running Firefox 3.6.3 on my aging machine, I got a dialog telling me that I should upgrade. I did. When the update was complete, and the application restarted, I was running Firefox 3.6.24, and shown a page saying:
    “Thanks for downloading Firefox, but this version is out of date. Unfortunately your computer's operating system isn't compatible with the most current Firefox learn more, but you are encouraged to download the most recent version that is compatible instead.”
    Clicking the link to the “most recent version” took me to a page which said:
    “Firefox 3.6.x will be maintained with security and stability updates for a short amount of time. All users are strongly encouraged to upgrade to the latest version of Firefox.”
    There was no other suggested version linked to that page, and the latest version of Firefox is, of course, NOT compatible with my machine.
    Mozilla is confusing me here. Why did Firefox drop back within v. 3.6.x from the version I was already running? Why does the site suggest upgrading to an apparently non-existent “latest compatible version” without providing a link to its suggestion?

    Other browsers that you can look at:
    * Camino: http://caminobrowser.org/download/releases/
    * [http://en.wikipedia.org/wiki/ICab iCab]: http://www.icab.de/dl.php
    * SeaMonkey: http://www.seamonkey-project.org/releases/seamonkey1.1.19

  • What's the most current version that runs on SP1?

    I need to find the most current version of QuickTime that will run on SP1. It is a work laptop and our IS department is reluctant to install SP2 on our systems, but I need to have QuickTime for an upcoming presentation that I am supporting. So any suggestions?

    iPhoto 11, v9.4.3.
    If you don't have iPhoto 11 already then you'll need to purchase an iLife 11 install disk, install the app and then update it.
    You may be able to purchase an iLife 11 disk on ebay or amazon.

  • What is the last stable version that FULLY supports ALL Kaspersky add-ins? How do I get it?

    I'm sick of FireFox updating itself and breaking Kaspersky add-ins I rely on. How do I roll back to a version that FULLY supports ALL Kaspersky add-ins?

    It is the other way as it is Kaspersky that supports Firefox. You cannot expect any Firefox version to just support the thousand of extensions out there.
    Unlike the vast majority of extensions which if compatible with Firefox 10.0 or even 4.0 they should usually still work fine. Extensions like these by Kaspersky needs to be compiled for each new Firefox version due to binary.

  • Recently updated MBP and Apple Configurator. Since updating the Update iOS option for Apple Configurator forces me to update the iOS. Thoughts?

    I have a MacBook Pro (Retina, 15-inch, Late 2013)
    Processor: 2.3 Ghz Intel Core i7
    Memory: 8 GB 1600 MHz DDR3
    Graphics: Intel Iris Pro 1536 MB
    OS: OS X Yosemite Version 10.10.1
    Apple Configurator
    Version 1.7.1 (550)
    Since upgrading both the OS and Apple Configurator I can no longer select the option to not update the iOS when I prepare a device. It is currently selected as When update is available. Also the option appears to be grayed out. Any thoughts?

    Google maps is now available in the app store and the carrier update that your refering to was for cell data usage while on wifi. It is perfectly fine to do the update. No issues that i had from that update.

  • What's the smallest, coolest phone that syncs reliably over BT with iSync?

    I've been using a Treo 600 & 650 for the last several years. I've been very pleased with it, and it syncs reliably to Address Book and iCal. I'm now out of contract with Sprint and can change carriers if I wish. I don't really need the larger PDA phone and would consider something smaller that syncs reliably over BT with iSync?
    Any recommendations?
    QB12

    1) Some revisions of motorola phones have a problem over BT so if you have on of these revisions you will have to use USB
    2) On Motorola phone, one contact is one phone number (it's Motorola's out-dated database, you can't change it). However, Motorola is aware of this problem so it included a way in the phone's Address Book settings to "coalesce" phone numbers that have the same contact name.

  • What is the correct port number that DI used to communicate with CI?

    Hello All,
    Could you tell me the correct port numbers that a dialog instance used to connect to Central instance?
    I just installed a CI (ABAP + Java) with instance number 05 and 06, and also I installed a DI which instance number is 07.
    Everytime when I tried to start up DI, the process list (disp+work) and Java server0 can not start up, always yellow...
    But when I close the windows firewall on CI machine, the CPU began to work happily until the DI started successfully with green light.
    So, I know the root cause is happened on port restrictions, but I don't want to alway let the CI windows firewall closed, I just want to allow the corresponding ports. Now, the port number I opened on CI is:
    3205,3206,3305,3306,3605,3606,3905,3906,50500,50501,50600,50601... But all of those port are not the correct ports, could  any experts tell me?
    Thank you very much in advance.
    Best regards,
    Nick

    Hi All，
    Thanks for your reply.
    I already opened those ports you mentioned above, but it still doesn't work, once I close the windows firewall, the work proess jlaunch.exe began to work.......CPU from the bottom to top....
    Yes, I know that it's useless to open the firewall between CI and DI, here I just want to know the mechanism of communication between CI and DI, which pots are they used.
    The instance number on CI is 05(ABAP) and 06(Java), and the number for DI is 07.
    On CI host, I opened ports:3205,3206,3305,3306,3605,3606,3905,3906, 50500,50501,50502,50600,50601,50602 and 1527
    On DI host, I opened ports:3207,3307,3607,3907,50700,50701,50702
    Are those not enough for communication between DI and CI?
    Best regards,
    Nick

  • What is the ideal RAID 5 logical drive configuration to use with editing 1080p on FCPX?

    Hello,
    I invested in one of the new Late 2013 Mac Pros (8-core 3GHz, dual Fire Pro D500 w/ 3GM VRAM each, 32GB RAM), along with a Promise Pegasus R6 Thunderbolt (ver 1) RAID because I wanted a fast and supremely smooth editing experience versus slow, laggy, drop frame performance I had been experienceing in my previous Mac (a mid-2010 27" iMac 2.8 GHz Quad-Core, 16GB RAM, Radeon 5750 with 1GB VRAM) that had media stored on a single 3TB firewire drive.
    The RAID came pre-configured with 6 x 1TB Toshiba drives giving me a Logical Drive that has 5TB capacity, 128kb stripe size, 512byte sector size, with Read Ahead/Write Back cache policy. I've also enabled "Forced Read Ahead" using terminal.
    THE PROBLEM:
    Even with this super fast media storage that gives me about 600MB/sec data transfer rate, I'm still sometimes experiencing lag and stuttered playback from the timeline (In all fairness, the stuttering only happens for a few seconds then plays fine, but the lag can be frustrating when I'm trying to click through the timeline to check edits). The footage I work with is 1080p mov files from Canon DSLR that are transcoded to ProRes 422 and Proxy during import into FCPX. I never edit with camera-native formats, always with ProRes. I also always close all other applications, eventhough all the power boasted by the Mac Pro shouldn't have a problem with that. I've tested the video cards by playing multiple 1080p H.264 files at once and it played about 10 simultaneously without a hitch. I've also edited under a new user and still the issue remains. My conclusion is that the lag comes from the RAID. (I did a test project with having my library saved on the internal flash storage and editing improved dramatically with speed and responsiveness, which signals that my problem must lie with the RAID).
    THE QUESTION:
    Is there a preferred or recommended stripe size and sector size that would cure my problem? Is it because it's RAID 5 even though I'm using 6 disks and getting tremendous sustained data xfer rates?
    OTHER RELATED INFO:
    My FCPX import settings copies all files into the library and I have Optimized and Proxy checked. My projects are also saved in the same library so everything is contained in one place.
    My projects are mostly 40 minute wedding videos 1080p at 23.98fps with lots of short video clips during montage segments, no more than 2 video tracks during the wedding the wedding ceremony.
    I frequenly repair permissions on the internal boot drive. Sometimes trash FCPX preferences when performance gets ridiculous or other glitches happen, like audio refusing to play, or the timeline plays no video just audio.
    Thank you! Any help or advice is appreciated!

    Hi,
    Making our tablespace in different directory does not improve the performance. See, Basic thing does if you are lauching your text file from different directory
    say Drives C , D and F respectively does your hit any performance (your OS is installed on Drive C). I don't thinnk you will getany boost up performance. See Basicaltl what is happening is that, try to launch you textpad and try to open the files from any there then you file will open immediately, if you ask me the reason behind that, you application is already loaded in the Memory to give the Service (same as ORACLE Instance). That's the difference.
    - Pavan Kumar N

  • What are the New IOS Versions available for 2960 series Switches?

    Hi all,
    can anybody give the details about it?
    thanks,
    Haribabu.

    15.0(1)SE is the latest-and-greatest IOS.  Unfortunately, I personally wouldn't recommend this to anyone because this version has a memory leak that affects switches even before configs are loaded.
    Next is the 12.2(58)SE2.  This is so-so.  The earlier version has a memory leak similar (not the same) as the 15.0(1)SE but it is triggered differently.
    12.2(55)SE4 is probably the most stable of the "new" versions. 

  • What is the highest Firefox version that supports my favourite plugins ?

    I marked the 4 plugins I will not relinquish even if they are no longer available in higher versions. That case I will not update.
    OR, what substitution is available instead of them ?
    Anyway, all info I have about Fox plugins that my favs are no longer supported, new versions are coming out more and more often, and this ruins plugin compatibility. I have no specific detailed info, neither have time digging in mozilla forums or support pages for hours. I rarely found useful info there in the past.
    I'd like someone who spends 12 hours a day here to post corresponding links.
    Thank you.
    [http://www.petyamaster.hu/temp/MyFoxPlugins.PNG MY PLUGINS]

    adblock plus, auto former & tinyeye work fine with the latest firefox 12
    tab kit won't work - i don't know what you are using it for exactly, but there is [https://addons.mozilla.org/en-us/firefox/addon/tab-mix-plus tab mix plus] that allows you to tweak tab settings in lots of different ways and [https://addons.mozilla.org/en-us/firefox/addon/colorfultabs colorful tabs] for colorful tabs ;-)
    since firefox 10 the addon compatibility system has changed to match the new rapid release cycle - so those addons will still be working after each update.

Maybe you are looking for

  • Copying the text of a link, not the link behind the text?

    I get emails that contained tracking numbers that are linked tracking information. I just want to copy the tracking number, not the link. When I hightlight the link and right click, all I get are options about the links. I did find that I could use c

  • Using blending modes

    I bring 2 images and stack them as layers.  Then I use blending modes (lighten, screen, overlay, etc..) to make one image. If I want to paint back part of the image I lost during blending via mask, normal brush does not work anymore. I even tried to

  • Mail Email crashes when I try to use forwarding option.

    Hi, I'v been having a lot of trouble with mail for the past 2 weeks. Basically everytime I use forward option Mail app crasses. Havey someone elso experienced the sem issue if so please could you let me know how to fix it? Thanks

  • How to update songs bought on itunes

    how to update songs bought on iTunes? in order to play them in Djay

  • Anyone ever have this problem???

    I recently have been bombarded with phone calls from AT&T asking for a person whom I don't know. Turns out this person has my exact same phone number, but is using AT&T as the provider. How can this be? I had my number changed a few months ago, so ma