What is the minimum payment threshold?

There is reference in the Payments and Financial Reports Guide to a "minimum payment threshold" but it seems nowhere to be defined precisely.  I've received a payment of under $10.00 directly into my bank account, which is fine.  Can I expect these on a monthly basis, or is there a point at which they will be aggregated to a minimum threshold amount before transfers to my account are made?

According to the FAQ at https://itunesconnect.apple.com:
Payments are made within 45 days of the last day of the month. To receive payment, you must have completed all documentation, including any required banking and tax information, as well as meeting the minimum payment threshold. If your bank and bank account currency is listed in this table, you must exceed a minimum payment threshold of $20 USD. All other bank countries and bank account currencies must exceed a minimum payment threshold of $150 USD.

Similar Messages

  • What's the minimum setting for WL as a proxy server

              What's the minimum setting of weblogic.properties for WL as a proxy server?
              

    Hi Michael,
    Recommended setting is the default setting which is 25 .dot.
    If your situation is abnormal and you see message delivery throttling state to “4” when the following performance counters are high or if you expect any of you integration
    process could have impact on following counters, then you can consider the suggestion by Microsoft. Don’t change the default setting.
    High process memory
    Process memory usage (MB)
    Process memory usage threshold (MB)
    You can see these counters under “BizTalk:MessageAgent”
    You can gauge these performance counter and its maximum values if have done any regression/performance testing in your test servers. If you have seen these counters having
    high values and causing throttling, then you can update the Process memory usage.
    Or unexpectedly you’re process high throughput messages in production which is causing these counters to go high and cause throttling, then up can update the Process memory
    usage.
    The above two cases where I know my expected process usage (by doing performance testing) or suddenly my production server processing has gone high due to unexpected business
    hike (or any reasons) which caused throttling, then do changes to default throttling setting.
    Just changing the default setting without actual reason could have adverse effect where you end up allocating 
    more processing capacities but the actual message processing message usage ever is low means you end up investing in underutilised resources.
    Regards,
    M.R.Ashwin Prabhu
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • How can I determine what is the minimum SCN number I need to restore up to.

    Say if I have a full database backup, I know I have file inconsistency, but I want to know what is the minimum time or SCN number a need to roll forward to in order to be able to open the database?
    For example: I do a database restore.
    restore database ;
    RMAN> sql 'alter database open read only';
    sql statement: alter database open read only
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of sql command on default channel at 03/16/2009 15:00:04
    RMAN-11003: failure during parse/execution of SQL statement: alter database open read only
    ORA-16004: backup database requires recovery
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
    I need need to apply archive log files. All references I find for ORA-00194 state the solution is to "apply more logs until the file is consistent " But "HOW MANY LOGS", or more apporaite up to what time or SCN? How does one determine what TIME or SCN is required to get all file consistent?
    I thought this query might provide the answer, but it doesn't
    select max(checkpoint_change#)
    from v$datafile_header
    MAX(CHECKPOINT_CHANGE#)
    7985876903
    --It applies a bit more redo, but not enough to make my datafiles consistent.
    recover database until SCN=7985876903 ;
    Starting recover at 03/16/09 15:04:54
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    using channel ORA_DISK_3
    using channel ORA_DISK_4
    using channel ORA_DISK_5
    using channel ORA_DISK_6
    using channel ORA_DISK_7
    using channel ORA_DISK_8
    starting media recovery
    channel ORA_DISK_1: starting archive log restore to default destination
    channel ORA_DISK_1: restoring archive log
    archive log thread=1 sequence=18436
    channel ORA_DISK_1: reading from backup piece /temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1
    channel ORA_DISK_1: restored backup piece 1
    piece handle=/temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1 tag=TAG20090315T041716
    channel ORA_DISK_1: restore complete, elapsed time: 00:02:26
    archive log filename=/u01/app/oracle/flash_recovery_area/P1/archivelog/2009_03_16/o1_mf_1_18436_4vxd81yc_.arc thread=1 se quence=18436
    Oracle Error:
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
    I've discover I need to apply archive logs until this query reports all datafiles as FUZZY=NO , but this only works by guessing at some time periord to roll forward to, then checking the FUZZY column, and try again. Is there a way to know, I have to roll forward to a specific SNC in order for all my datafiles to be consistent?
    select file#
         , status
         , checkpoint_change#
         , checkpoint_time
         , FUZZY
         , RECOVER
    ,LAST_DEALLOC_SCN
    from v$datafile_header
    order by checkpoint_time
    Thanks,
    Jason

    The minimum point in time is the time when the last backup piece for datafiles in that backup was completed.
    Your alert.log should show the redo log sequence number at that time.
    You can query V$ARCHIVED_LOG and get the FIRST_CHANGE# of the first archivedlog generated after that backup piece completed.
    A
    LIST BACKUP;in RMAN should also show you the SCNs at the time of the backups.
    You can also query SCN_TO_TIMESTAMP -- eg
    select timestamp_to_scn(to_timestamp('15-MAR-09 09:24:01','DD-MON-RR HH24:MI:SS')) from dual;will return an approximation of the SCN.
    Hemant K Chitale
    http://hemantoracledba.blogspot.com
    Edited by: Hemant K Chitale on Mar 17, 2009 9:41 AM
    added the LIST BACKUP command from RMAN.

  • What are the minimum system requirements for GB 4?

    What are the minimum system requirements for GB 4? I did search this forum but wasn't able to find a direct answer.
    I'm running version 3.0.4 successfully on a lowly G4 733 but I suspect this is as far as I can go.
    I'm updating to iDvd'08 and was also wondering if I can safely update to GB4 or not (from GB 3.0.7) on a G4 733 mhz Digital Audio. Any help would be sincerely appreciated. My guess is that I cannot but I'd like to confirm prior to attempting any further updates in GB.

    I try my best to play it safely; always. And you were right, everything worked on the ext. FW HD flawlessly ...... truly amazing software!
    (I did happen to check the activity Monitor w/in Utilities and it showed GB4 using about 60-67% of the CPU on a G4 733 ..... I'm assuming this is normal).
    Click Here
    Not sure if there's a correct order to opening these apps as there has been in former versions of iLife ..... however, this (as shown above) is the order in which I opened all apps, and all worked well.

  • What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?

    What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?
    SharePoint permission levels required for the user profile?
    Does the user need top level permissions on the SharePoint site?
    What other minimum requirements must be met for Outlook 2010 to synchronize successfully with SharePoint 2010?
    TheDrape

    Hi,
    To synchronize these libraries and lists, you must have Outlook 2010 installed on your client computer and you must have Collaborate permission to the library or list.
    You don’t need any permissions for the user profile.
    I provide you a link about synchronizing SharePoint 2010 content with Outlook 2010 for your reference:
    http://office.microsoft.com/en-us/sharepoint-foundation-help/synchronize-sharepoint-2010-content-with-outlook-2010-HA101881295.aspx
    Thanks,
    Rock Wang
    Rock Wang TechNet Community Support

  • What are the minimum db user privileges required for CDC?

    What are the minimum privileges required for the source data server user in order to to successfully implement CDC
    Currently I'm getting an "Insufficient privileges" error when trying to start a CDC journal on a model. The error is happening on the step that creates a trigger on the table in the source schema.
    Here's the situation:
    The data server uses the user "ODI_TEMP" for its connection. ODI_TEMP has been granted select privileges on the desired tables in the source schema. When starting the CDC journal on the model for the source schema, ODI tries to create a trigger on the source tables. This fails since the ODI_TEMP user can't create triggers on anything outside of it's own schema. For obvious fundamental security reasons, we cannot give the ODI_TEMP user the CREATE ANY TRIGGER system privilege on the data source.
    Journalizing is set up using JKM Oracle Consistent. ODI is 11g, DB is 11g.

    Hi,
    You can go for this
    Grant CREATE ANY TRIGGER system privilege to ODI_TMP
    Start the Journal , it will create triggers in ODI_TMP schema for the tables present in your source schema.
    Now revoke CREATE ANY TRIGGER system privilege from ODI_TMP.
    It will continue to work .. only when you are restarting the journal (due to adding or removing some tables in CDC) , you will be requiring CREATE ANY TRIGGER privilege.
    Thanks,
    Sutirtha

  • What are the minimum CPU and Memory requirements for R12 Vision instance?

    We are in the process of trying to figure out what the minimum hardware requirements are for installing the R12 Vision instance. This Vision instance would only have 5 or less concurrent users. We may have to order a new server and we are wondering what the minimum CPU and memory would be? Oracle Support will not give us this information.
    We aleady know how much disk space it will need.
    Dan

    Hi,
    See these links.
    A Primer on Hardware Sizing for Oracle E-Business Suite
    http://blogs.oracle.com/stevenChan/2010/08/ebs_sizing_primer.html
    What Are the Minimum Desktop Requirements for EBS?
    http://blogs.oracle.com/stevenChan/2010/09/ebs_pc_clients.html
    Also, please see old threads for similar discussion.
    Hardware Requirements
    http://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+Requirements&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Benchmark
    http://forums.oracle.com/forums/search.jspa?threadID=&q=Benchmark&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How do I know what is the minimum resource requirement for OLAP 11g?

    How do I know for OLAP 11gR1 ...
    1. what is the minimum number of CPUs and speed required
    2. how much minimum physical memory, SGA, PGA etc. is required?
    Regards, Anirban

    Hello Anirban,
    In summary, since the OLAP option is an option to Oracle Database 11g, Enterprise Edition the minimum requirements in order to run the database would be identical to those necessary to run a "Data Warehousing" type installation. That being said starting up a database is a far cry from actually performing well while accessing and building OLAP Cubes in your Database.
    There are lots of things to consider. For example: the complexity of your model; data sparcity; level of aggregation; system load, SLAs, etc..
    Lets look at true minimum requirements and then consider what it would take to achieve good performance in your environment
    TRUE MINIMUM...
    I performed a test in my environment (Oracle Database 11g Release 2 (11.2.0.2.0) on Oracle Enterprise Linux 5.5) using Analytic Workspace Manager 11.2.0.2.0A and found the following minimum settings to work against the OLAPTRAIN schema (You may find it here http://www.oracle.com/technetwork/database/options/olap/index.html). This is a very small schema which we use for demonstration purposes.
    I discovered that the database started with a memory_target of only 160m (apparently this is the absolute minimum for my environment). I knew that if the database successfully started that I would be able to query the Cube but maintain it? Running queries against the OLAPTRAIN Sales Cube, despite being slow, worked as anticipated. Next, I performed a maintain operation on the Sales Cube where I had to abort the job because it ran into memory issues at 160m, however, when I increased it to only 180m it did a complete maintain in a reasonable timeframe, albeit slow considering the limited resources.
    MINIMUM REQUIREMENTS TO ENSURE REASONABLE PERFORMANCE IN YOUR ENVIRONMENT
    Most importantly ensure you have a good cube design
    Run a sample set of your data in order to define what "reasonable performance" is for your environment. Create a small representative cube in order to test both build and query performance while collecting and analyzing database statistics through AWR and ADDM. For OLAP option specific queries please take a look at http://wiki.oracle.com/page/OLAP+option+-DBASample+Scripts.
    You could creat a view on top of your fact table and use the view to generate your OLAP Cube. This will allow you to test a more manageable amount of data. For example, if you have 10 years of data and want to determine the footprint and resources required in order to manage a Cube of this volume then consider scoping it down to a few months first then increase it by a measured amount in order to predict requirements. Monitor your resources and ensure you balance I/O, memory and processors. Since the OLAP option is a Enterprise Edition option it falls under Data Warehousing. As such there is plenty of literature available on oracle.com in order to define what it takes to achieve a balanced Data Warehouse.
    I would recommend contacting Oracle Consulting or an Oracle Partner to determine the best fit for your environment.

  • [SOLVED] What is the minimum .reg configuration for monting eMMC2??

    Hello Friends,
    Greetings for the day!!
    As, I have a board that contains the eMMC2(slot=3). We have made some changes in the driver for make it capable for slot=3. Now, the turn of .reg files. We have made all the required entries for Driver\BuiltIn\SDHC3. And driver is taking the values correctly.
    Now the part of remaining entries related to file system, profiles, partition, partition table etc
    I have made entries are as - 
    [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles]
    "AutoMount"=dword:1
    "AutoPart"=dword:1
    "AutoFormat"=dword:1
    "MountFlags"=dword:1
    "DefaultFileSystem"="FATFS"
    "PartitionDriver"="mspart.dll";; -- Required
    "Folder"="";; -- Required
    [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC]
    "Name"="MMC Card"
    "Folder"="MMC_CARD" ;MC Card
    "AutoMount"=dword:1
    "AutoPart"=dword:0
    "AutoFormat"=dword:0
    "DefaultFileSystem"="FATFS"
    "PartitionDriver"="mspart.dll"
    [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC\FATFS]
    "Flags"=dword:14
    "FormatTfat"=dword:1
    "DisableAutoScan"=dword:1
    "FormatNumberOfFats"=dword:2
    "EnableWriteBack"=dword:1
    ;;"CheckForFormat"=dword:1
    [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC\Part00]
    "Folder"="MMC_Part"
    "AutoPart"=dword:1
    "MountPermanent"=dword:1
    ;; "AutoMount"=dword:1
    "BootPhase"=dword:1
    "MountHidden"=dword:1
    "MountAsBootable"=dword:1
    "MountAsRoot"=dword:0
    "MountSystem"=dword:1
    "AutoPart"=dword:0
    [HKEY_LOCAL_MACHINE\System\StorageManager\Autoload\fsdmgr]
    "Dll"="fsdmgr.dll"
    "Paging"=dword:1
    "LoadFlags"= dword:1
    I have read lot of document related to the issue that eMMC2 is not mounted for most of the persons. In every document I have observed that they are using different keys and keys values.. I am confused that what is the minimum keys and keys values required
     for the eMMC2 to be mounted apart from driver level.... ???
    With this values my logs are as -
    13525 PID:400002 TID:2300006 SDBusDriver: The SDIO card does not support block mode. Use Soft-Block instead.
    13527 PID:400002 TID:4bc0002 AddFonts(.ttf) returned 4 fonts
    13527 PID:400002 TID:4bc0002 AddFonts(.ttc) returned 0 fonts
    13528 PID:400002 TID:4bc0002 AddFonts(*) returned 4 fonts
    13529 PID:400002 TID:4bc0002 AddAllEUDCFonts(tte) returned 0 fonts
    13531 PID:400002 TID:2300006 SetInterface MMCHS_HCTL value = F02
    13531 PID:400002 TID:2300006 SDSetCardInterfaceForSlot - HC ClockRate differs desired setting: desired: 20000000 Hz, Actual : 19200000 Hz
    13532 PID:400002 TID:2300006 The clock rate is set to 19200000
    13533 PID:400002 TID:2300006 HandleAddDevice: LoadDevice type = 1, slot 0
    13540 PID:400002 TID:2300006 OSAXST1: >>> Loading Module 'sdmemory.dll' (0x9E474C58) at address 0xEEB10000-0xEEB2A000 in Process 'NK.EXE' (0x8711FAD0)
    PB Debugger Loaded symbols for 'C:\WINCE700\OSDESIGNS\ENVENTURE\ENVENTURE\RELDIR\PHYTEC_AM335X_BSP_ARMV7_DEBUG\SDMEMORY.DLL'
    13591 PID:400002 TID:2300006 SDMemory: +SMC_Init
    13591 PID:400002 TID:2300006 SDGetDeviceHandle: ActivePath: Drivers\Active\32
    13593 PID:400002 TID:2300006 SDGetClientFunctions: +Init
    13594 PID:400002 TID:2300006 SDGetClientFunctions: -Init
    13596 PID:400002 TID:2300006 SDMemCardConfig: Card is high capacity (2.0+)
    13596 PID:400002 TID:2300006 SDMemCalcDataAccessClocks: Tpd:f ns, Asynch: f ns, AsyncClocks:0 , SyncClocks: 1078591488, ReadTotal: 0, Write Factor: 1099109072 WriteTotal: 769230
    13597 PID:400002 TID:2300006 SDMemory: Initialize: Using block transfer size of 64 blocks
    13598 PID:400002 TID:2300006 SDMemory: Idle Timeout: 2000 Idle Power State: 2
    13599 PID:400002 TID:2300006 SDMemory: Power Management Setup complete
    13599 PID:400002 TID:2300006 SDMemory: -SMC_Init
    13602 PID:400002 TID:8b0002 SDMemory: GetDeviceInfo - Profile = eMMC, length = 10
    13602 PID:400002 TID:8b0002 SDemory: GetDeviceInfo - RegQueryValueEx(Profile) returned 2
    13603 PID:400002 TID:8b0002 SDMemory: GetStorageID Insufficient buffer space
    SDMemory: -GetStorageID
    13608 PID:400002 TID:8b0002 Partition Part00 NumSectors=15106032
    13608 PID:400002 TID:8b0002 MSPART!PD_OpenPartition: dwStoreId=AB543350, PartName=Part00
    13617 PID:400002 TID:8b0002 CreateCache: Successful. Cache Size: 256 KB, Start: 6, End: 29453, CreateFlags: 2.
    13619 PID:400002 TID:8b0002 CreateCache: Successful. Cache Size: 256 KB, Start: 29454, End: 15106031, CreateFlags: 2.
    13627 PID:400002 TID:4bc0002 LogFontFromRegistry(SYSTEM\GWE\Menu\BarFnt), lfHeight = -12
    13628 PID:400002 TID:4bc0002 LogFontFromRegistry(SYSTEM\GWE\Menu\PopFnt), lfHeight = -12
    Anyone can tell me that what is the minimum .reg entries that is required to mount the eMMC2 ????

    Hello Friends,
    I am happy to intimate you that I have self solved the above problem with minimal configuration as shown below -
    [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles]
    "AutoMount"=dword:1
    "AutoPart"=dword:0
    "AutoFormat"=dword:0
    "MountFlags"=dword:0
    "DefaultFileSystem"="FATFS"
    "PartitionDriver"="mspart.dll";; -- Required
    "Folder"="";; -- Required
    [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC]
    "Name"="MMC Card"
    "Folder"="MMC_CARD" ;MC Card
    But, atleast you have to find the tool that format and create single partition as per your requirement ...

  • What is the minimum file system access needed to run ODI 10.1.3.4.0 client?

    Hi ODI discussion folks,
    I have a couple of questions from an Oracle partner that I'm trying to find a definitive answer for if possible. The partner is setting up ODI 10.1.3.4.0 for a customer who insists that the absolute minimum amount of access to the file system is granted due to corporate security policies.
    I have checked the bundled ODI documentation but couldn't really find anything about file system permissions needed to run the ODI client. I was pointed towards the "Setting Up Security for an Integration Project — What to Consider" document but this does not mention a great deal about how much access to the file system is needed for the ODI client to function.
    What the partner is asking is the following:
    "1. What are the minimum file/folder permissions needed for the ODI client installation? I'm installing at xxxxx
    and their machines have to be locked down as much as possible.
    2. Say you have 3 users all wanting to run integrations etc and the Master and Work
    repositories have been set up. An admin installs the ODI client but doesn't
    create the connection to the Master repository. What are the minimum
    file/folder permissions required on the client machine to:
    a) create the connection to the repository
    b) run any subsequent integrations?"
    If anyone can advise on this then that would be much appreciated.
    Regards
    Craig Huggans
    Oracle Hyperion Support
    Message was edited by:
    user648991

    Hi Craig,
    How are you?
    Let me try to contribute a little....
    1) The minimum requirement is for its own installation directory, there is no reason to have access to other directories unless if it is necessary to read files from some other directory at the client
    2) Again only to its own install directory. The connection setting is recorded at \bin install directory. After that, all information are recorded at repository, there is no client work.
    Be free to contact me by email or phone if you have any new doubt. You can get my email from my profile.
    Does it respond your doubts?
    Cezar Santos

  • What is the minimum number of dead pixels?

    Hi. I recently purchased an Apple LED Cinema Display. It's very beautiful but i have found one dead pixel. The reseller refuses to change or fix it because they can offer assistance only for more than 4 dead pixels. I called Apple and they said me that "one pixel is accetable". In my opinion, aboslutely NO!
    Does anyone had his LED display changed with only one pixel dead or stuck?
    What is the minimum amount of defective pixels to ask for assistance? Some say 4, other 7...
    Thanks

    Apple replaced it. When I booked the appointment with my local Genius as requested a phone call prior to the appointment. During the phone call the Genius was very professional and courteous, and told me that he would be replacing it as an exception and that strictly speaking the 24" display could have up to 9 dead pixels before they would consider it a defect. Never mind this though as they did replace it without any hassle.

  • What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API

    The question says it all:
    What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API.?
    In the User Profile -> Permissions there is only the option for "Full Control".

    Hi Nikolay,
    Thanks for posting your issue, you need to set permissions on User Profiles = Read. Kindly find the below mentioned URLs to get the code and more details on this.
    http://www.vrdmn.com/2013/02/sharepoint-2013-working-with-user.html
    http://www.vrdmn.com/2013/07/sharepoint-2013-get-userprofile.html
    http://sharepoint.stackexchange.com/questions/61714/sharepoint-2013-call-the-rest-api-from-sharepoint-hosted-app
    http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2013/04/09/how-to-query-sharepoint-2013-using-rest-and-javascript.aspx
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • What is the minimum speed Telstra guarantees ADSL 2+ to connect at?

    What is the minimum speed Telstra guarantees ADSL 2+ to connect at? I asked a Telstra sales person what the minimum speed was they said the minimum was 8 Mb/s. I asked for that in writing but they could not find it, nor could they find the minimum speed in any documentation. Am I correct in thinking the minimum speed guaranteed by Telstra (for ADSL 2+) is 256 Kb/sec?

    Hi jjobrien, Not since the 90s has anyone considered 0.33mbps to be a good speed, so I can understand your frustration with this.  What affects your ADSL speed The speed achieved on ADSL depends on a number of factors, the main one being the cable distance between your premises and the DSLAM. Whirlpool have an article that explains the relationship between distance and speed very well and you can view it here: http://whirlpool.net.au/wiki/dslam_speeds There are also DSLAMs that are affected by high demand, and lowering the overall speed available to customers. We are working on upgrading these exchanges and as upgrades are planned, these can be viewed here: http://telstrawholesale.com.au/download/document/tw-report-backhaul-upgrade.xls The configuration of the equipment and internal wiring of your home can also have a big part to play in speed results. How to check your equipment It is possible that there is a fault within network (and not just a matter of cable length), but to confirm this we ask customers to perform an isolation test. We do this on every call as it can not only resolve or identify the issue sooner for customers, but also prevents an unnecessary technician visit and the possibility of an incorrect call out charge. You have already checked these when you called previously, but to make sure a simple fix hasn't been missed, please take a look at this link for the things we look for:  http://crowdsupport.telstra.com.au/t5/General-Internet-KB/How-to-perform-an-Isolation-Test/ta-p/5501... In some circumstances, applying a line profile can provide more stability on the network. This next link provides information on how this works and how customers can manage this setting.  This is mainly used for customers experiencing disconnections, however in some cases can also improve speed if the issue is caused by packet loss. https://go.telstra.com.au/helpandsupport/-/adsl-line-profiles [Note: after logging in, some customers will be redirected to My Account and need to perform the following steps to then select Account Services then My BigPond from the menu located at the top right of the page.] If you are connected to your modem via WiFi, then this is also an area where speed can be lost. This WiFi Troubleshooting link may be helpful: http://crowdsupport.telstra.com.au/t5/General-Internet-KB/WiFi-Troubleshooting/ta-p/107516     If you have confirmed that the above has been done, and you would like for us to assist you further, please provide your contact and account details via the online form that I will send via private message. Please allow up to 5 business days for a response as we respond to each one in the order that it was submitted. - Shelly  Wow. Thanks Shelly. I could all do that, but given I have been onto this issue for years on end, and Telstra have freely admitted that their infrastucture is inadequate of delivery their own quoted minimum speeds, I think you are being completely unreasonable.I can understand that getting cutomers to do your work for you is better for you economically, and that using your own staff and technichians would cut into your profits, reported to be 3.8 Billion last year, I get that, I'm in business too, but we have a contract, you and I, and I'm fulfilling my part of that contract and you are not.My part says that I will pay you. Your part says that you will deliver a service.So as I see it, and I'm not a comercial contract lawyer, perhaps you are, maybe "Ira" from billing is, who knows, but as I see it you have a responsibility to either A: upgrade the service - we both know that is not going to happen, because I have been informed by Telstra directly that no upgrade is scheduled, and I followed the link you sent me to report/backhaul-upgrade.xls to a blank document that I couldn't make sense of, or B: change the contract and charge me far less. I propose that you charge me on a pro rata basis. If you deliver 25% speed, I pay 25% fee. You must understand here, I'm not proposing that upgrade a DSLAM and/or that you dig a trench and lay a fancy new cable to my house just so that I cmay enjoy a first world luxury, Im not saying that. What I am saying is that we have a billing issue.How do you see it?John. 

  • Trying to update apps on iPhone keeps saying funds not available which there are. What's the minimum balance for free updates?

    Trying to update apps on iPhone keeps saying funds not available which there are. What's the minimum balance for free updates?

    Updates are free. Upgrades aren't.

  • What is the minimum permission required to discover the Farms in the Sahrepoint Server?

    What is the minimum permission required to discover the Farms in the SahrePoint Server?
    Do I need to have the access to the SharePoint Database?
    I want to do this with help of a 3rd Party API.
    Thanks
    psarroj

    Access to SharePoint doesn't necessarily give access to the SharePoint databases.  See Add-SPShellAdmin description.
    https://technet.microsoft.com/en-us/library/ff607596.aspx
    Permissions on the databases themselves is often required when accessing SharePoint information programmatically.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

Maybe you are looking for

  • RSS Feeds on Podcast(not working)

    I use Go daddy as my host not .mac which I am starting to believe is the cause of the problem. http://www.johnnyjungle.com/JungleRadio/JungleRadio.html is my page that I am having problems with so you can see for yourself....does anyone know why the

  • How to determine Hardware version when Sticker does not (seemingly) show Hardware Version ???

    Hi, I currently have a Cisco RV042, I MAY be blind, but I can not see the Hardware version mentioned on the sticker at all. The router was manufactured 06/2012 and was shipped with Firmware rev: 4.1.1.01.  The Hardware version does not appear next to

  • Some kind of thread scheduling lag in 6.1sp2

    I've got a 2000sp4 box with Web Server 6.1sp2 installed. I'm running ColdFusion MX as well. The machine is a dual-P4 3.2Ghz. with 4gb of RAM. What I'm seeing is at random times, a user will request a page, and then be stuck waiting for a long time (t

  • Sync Skype acct on laptop with Kindle Fire

    I'm using Skype through Facebook on my laptop.  I would like to add the same account and contacts on my Kindle Fire.  Right now, I have two accts, one on each, but I'd like to sync them up.  Any ideas?

  • Erroe -102, what does it mean?

    what does mean error -102 while i'm exporting an imovie project? please help me