What is the minimum sign up time I can have £10 Everything Pack?

What is the minimum sign up time I can have £10 Everything Pack. I am only going to be in the UK for less than 1 month and can find no informationon how to prevent nonthly deductions continuing. I know I can  not add credit with a non UK credit card but can I open an account from Australia without a UK credit card? And If it can be done how do i do it? Can I get the SIM card sent to Chepstow by Friday 7th August?

Thanks for you very quick reply. Here is my full problem. I want to get a £10 Everything Pack including new SIM card (although another page seems to say £12.99 or something similar) . I am in Australia about to walk for three weeks in the UK. I arrive in Bristol on Saturday afternoon and go straight to our B&B in Chepstow. With a quick internet search I can find no EE dealer in Chepstow. Through your website I was hoping to order an EE SIM and have it delivered to the B&B for me to collect by 7th August. However my identification is needed. Can I email my photocopied ID (passport or driver’s licence) to EE and have someone sign for the SIM at the B&B? Also, can I start an account by phone as I only have an Australian credit card? I do not anticipate needing to top up the account.
I can find no email contact on your website for such direct enquiries.
Alternatively, can I get an EE card somewhere in Bristol on a Saturday afternoon? If so, where?

Similar Messages

  • Does anyone know what is the best version of word I can have on my older mac mini 10.5.8 PPC? I am running Leopard. Does anyone have it or know where I can get it please?

    Does anyone know what is the best version of word I can have on my older mac mini 10.5.8 PPC? I am running Leopard. Does anyone have it or know where I can get it please?

    I agree with Grant. But to answer your question, that would be Word 2008. A quick search turns it up on sale at Amazon. You'll need to find it somewhere other than Microsoft itself, since MS stopped selling it when they released Word 2011.
    http://www.amazon.com/Microsoft-Office-2008-Mac-Version/dp/B000WR2F2M

  • What is the minimum delay on Time based workflows?

    Hi,
    I would like to know if there is a way to define a Wait action between 0 and 1 minute. My need is to define a wait of 10secondes. Is it possible using function or other ways?
    Thanks a lot
    Regards

    Thanks for you very quick reply. Here is my full problem. I want to get a £10 Everything Pack including new SIM card (although another page seems to say £12.99 or something similar) . I am in Australia about to walk for three weeks in the UK. I arrive in Bristol on Saturday afternoon and go straight to our B&B in Chepstow. With a quick internet search I can find no EE dealer in Chepstow. Through your website I was hoping to order an EE SIM and have it delivered to the B&B for me to collect by 7th August. However my identification is needed. Can I email my photocopied ID (passport or driver’s licence) to EE and have someone sign for the SIM at the B&B? Also, can I start an account by phone as I only have an Australian credit card? I do not anticipate needing to top up the account.
    I can find no email contact on your website for such direct enquiries.
    Alternatively, can I get an EE card somewhere in Bristol on a Saturday afternoon? If so, where?

  • What is the SMALLEST SGA for 10g you can have on Windows OS?

    Hi all,
    We are setting up a server that will be used for some DBA classes. Each student will get their own database instance to play with. For this reason, we want to try and create the SGA's with the SMALLEST possible amount of memory, so that we can put as many instances as possible on the server.
    So far, the smallest we've been able to get them is down to about 68 Megs. If the SGA_TARGET is set to anything smaller than that, we get the "ORA-04030 out of process memory" error.
    I've often read about tricks in Windows to make your SGA bigger, does anyone know how to do the opposite?

    If you eliminate the Java, Large and Streams pools, you should be able to go a bit lower. However, tha means you can not use those features.
    Remember that the smallest size is dependant on the definition of granule - in your case it'll be multiples of 4M.
    It's been a while since I played with this area, but it seem to me the smallest I managed was around 56M. I also remember having discussion with someone who achieved around the 56-64M size by unloading Java ... all he needed was pure SQL for OiD.

  • What is the maximum amount of memory I can have for my computer?

    The specs are:
      Model Name:
    iMac
      Model Identifier:
    iMac7,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    4 MB
      Memory:
    1 GB
      Bus Speed:
    800 MHz
      Boot ROM Version:
    IM71.007A.B03
      SMC Version (system):
    1.20f4
      Serial Number (system):
    W8******X85
      Hardware UUID:
    00000000-0000-1000-8000-001B63A2472A
    Memory Slots:
      ECC:    Disabled
    BANK 0/DIMM0:
      Size:    1 GB
      Type:    DDR2 SDRAM
      Speed:    667 MHz
      Status:    OK
      Manufacturer:    0xAD00000000000000
      Part Number:    0x48594D503531325336344350382D59352020
      Serial Number:    0x00001019
    BANK 1/DIMM1:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    I'd like to upgrade to Mavericks, but do not have enough memory.
    <Edited By Host>

    Download Mactracker.  This software will tell you the max amount of RAM your model iMac can handle.
    Due to security reasons, NEVER post serial #s on a public message board.  Will notify a HOST to remove/edit.

  • What is the minimum trigger hold off time for the 5124

    What is the minimum trigger hold off time for the 5124 i.e. what is the fastest i can collect data without streaming?
    Mark Mutton
    Electrical Engineer

    Good morning Mark,
    Thanks for contacting National Instruments with your issue, we'll try our best to resolve it for you as quickly and efficiently as possible.
    The minimum trigger hold-off time for the NI PXI/PCI-5124 is 2 us with TDC disabled and 10 us with TDC enabled.
    You can take a look at any other trigger specifications for the NI PXI/PCI-5124 below:
    http://digital.ni.com/manuals.nsf/websearch/35D2892B4AC32E5A8625704A00590CFD
    Best of luck with your project.
    Sincerely,
    Minh Tran
    Applications Engineering
    National Instruments

  • How can I determine what is the minimum SCN number I need to restore up to.

    Say if I have a full database backup, I know I have file inconsistency, but I want to know what is the minimum time or SCN number a need to roll forward to in order to be able to open the database?
    For example: I do a database restore.
    restore database ;
    RMAN> sql 'alter database open read only';
    sql statement: alter database open read only
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of sql command on default channel at 03/16/2009 15:00:04
    RMAN-11003: failure during parse/execution of SQL statement: alter database open read only
    ORA-16004: backup database requires recovery
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
    I need need to apply archive log files. All references I find for ORA-00194 state the solution is to "apply more logs until the file is consistent " But "HOW MANY LOGS", or more apporaite up to what time or SCN? How does one determine what TIME or SCN is required to get all file consistent?
    I thought this query might provide the answer, but it doesn't
    select max(checkpoint_change#)
    from v$datafile_header
    MAX(CHECKPOINT_CHANGE#)
    7985876903
    --It applies a bit more redo, but not enough to make my datafiles consistent.
    recover database until SCN=7985876903 ;
    Starting recover at 03/16/09 15:04:54
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    using channel ORA_DISK_3
    using channel ORA_DISK_4
    using channel ORA_DISK_5
    using channel ORA_DISK_6
    using channel ORA_DISK_7
    using channel ORA_DISK_8
    starting media recovery
    channel ORA_DISK_1: starting archive log restore to default destination
    channel ORA_DISK_1: restoring archive log
    archive log thread=1 sequence=18436
    channel ORA_DISK_1: reading from backup piece /temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1
    channel ORA_DISK_1: restored backup piece 1
    piece handle=/temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1 tag=TAG20090315T041716
    channel ORA_DISK_1: restore complete, elapsed time: 00:02:26
    archive log filename=/u01/app/oracle/flash_recovery_area/P1/archivelog/2009_03_16/o1_mf_1_18436_4vxd81yc_.arc thread=1 se quence=18436
    Oracle Error:
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
    I've discover I need to apply archive logs until this query reports all datafiles as FUZZY=NO , but this only works by guessing at some time periord to roll forward to, then checking the FUZZY column, and try again. Is there a way to know, I have to roll forward to a specific SNC in order for all my datafiles to be consistent?
    select file#
         , status
         , checkpoint_change#
         , checkpoint_time
         , FUZZY
         , RECOVER
    ,LAST_DEALLOC_SCN
    from v$datafile_header
    order by checkpoint_time
    Thanks,
    Jason

    The minimum point in time is the time when the last backup piece for datafiles in that backup was completed.
    Your alert.log should show the redo log sequence number at that time.
    You can query V$ARCHIVED_LOG and get the FIRST_CHANGE# of the first archivedlog generated after that backup piece completed.
    A
    LIST BACKUP;in RMAN should also show you the SCNs at the time of the backups.
    You can also query SCN_TO_TIMESTAMP -- eg
    select timestamp_to_scn(to_timestamp('15-MAR-09 09:24:01','DD-MON-RR HH24:MI:SS')) from dual;will return an approximation of the SCN.
    Hemant K Chitale
    http://hemantoracledba.blogspot.com
    Edited by: Hemant K Chitale on Mar 17, 2009 9:41 AM
    added the LIST BACKUP command from RMAN.

  • Elementary: what is the dollar-sign ($) in a column name mean?

    I periodically see dollar signs in column names in Oracle tables. For example, when I create a LOB, often times the LOB segment will end in a dollar-sign (or two). Sometimes when one of the developers creates an object, I see some of the field namess have dollar-signs at the end of them.
    What does the dollar-sign mean?
    What does two dollar-signs mean?
    Just curious...they seem to function as normal characters.

    They are just normal characters. But Oracle (and other vendors) will frequently use characters like $ that normal developers don't normally use in order to create conventions around table names.
    For example, Oracle provides a number of data dictionary tables that use x$, v$, and gv$ as prefixes. There is nothing inherently special about those prefixes. But they convey meaningful information to the users of those systems (x$ views are undocumented views, v$ views provide information about activity on the local instance, gv$ views provide information about activity on all the instances of a RAC cluster). And using those sorts of prefixes prevents confusion between application tables and Oracle tables. Lots of applications, for example, have a SESSION table. Having the V$ prefix for the Oracle-delivered V$SESSION table makes it easy to avoid confusion from having two identically named tables.
    Justin

  • I'm trying to update an app on my iPod touch but it says that it's unable to download the application at this time. I've tried everything what else can I do to fix this problem??

    I'm trying to update an app on my iPod touch but it says that it's unable to download the application at this time. I've tried everything what else can I do to fix this problem??

    Try going to Settings>Store and sign out and sign back in.
    It also could be due to an Apple server problem. and yu will just have to wait and try again.

  • What is the minimum browser requirements for Captivate 5? (Specifically Flash and Java)

    I create a Captivate from and upload it to our LMS. When employees access the course it takes a long time for it to load. My IT department is asking what is the minimum browser requirements for Captivate 5? Specifically Flash and Java. This is occuring on PC's and a Citrix environment.

    Hi there,
    Thanks for reaching Adobe Community. Please accept my apologies for the same.
    There is nothing in specific. When you say it takes a long time, do you mean on the LMS or locally as well?
    Try updaing the Flash Player.
    You can download the Falsh Player Versions from the below link:
    http://www.adobe.com/support/flashplayer/downloads.html
    Which browser you are using?
    Also what objects you have in your project?
    Does it have widgets or heavier graphics?
    Also are you using any particular preloader? Have you tried using the default.swf preloader?
    Thanks!

  • What's the minimum Clock Speed Requirement for GB3?

    What's the minimum Clock Speed Requirement for GB3 (assuming one wishes to create and play mult. audio tracks within this current iLife app)? Is it 733mhz?
    Here's what i was able to find on
    iLife ’06 requirements:
    To install iLife, you need:
    • A Macintosh computer with a PowerPC G4, G5, or Intel Core processor; 733 MHZ or faster required for iDVD
    • 256 MB of RAM; 512 MB recommended
    • Mac OS X version 10.3.9 or Mac OS X version 10.4.3 or later; Mac OS X version 10.4.4 recommended
    • iTunes 6.0.2 and QuickTime 7.0.4 (included)
    • A DVD drive for installation
    • 10 GB of disk space to install iLife '06 applications

    Thanks Christoph, TIA, and AppleGuy!
    Christoph, what model are you using? You said you have even less Mhz, but your model looks like the same as mine.
    TIA, I looked at the other thread (thanks for the link) any idea what other models are affected by the sound output problem?
    I probably will back up first just to be safe, and won't try running them both at the same time. I was hoping though to have full functionality of the Podcasting features plus all the old music ones without slowing the machine down.
    Tansef

  • What is the minimum pulse width output for PCI7831R?

    I have a problem to generate the signal output by using PCI7831R.
    I have used Labview FPGA program and PCI7831R with my experiment.
    When I tried to output a signal which has a pulse width less than 2msec, Its pulth width becomes double or triple longer than I set.
        For example, if I set the pulse width 1msec, its output pulse width became 3msec...
                              But if I set the pulse width 2.5msec, its output pulse width is just 2.5msec.
    Internal clock is 40MHz and theoretical rate is 53.5MHz. And the cycle time of main loop is less than 0.5msec.
    (I believe those value are fine to generate the 1msec pulth width output.)
    My questions are
    -What is the minimum pulse width for PCI7831R?
    -Do you have any idea to solve this problem?
    I attached the picutre of my VI.
    (because this picture is a little old, It has broken wires. But it is fine now.)
    If conditions are all good, this VI will output the signal during "Injection Duration(micros)" micro-second.
    Thanks,

    I'm sorry I could figure out what was the problem.
    And I also find the minimum output pulse width on the catalog (12.5nsec).
    Thanks,
    Kaoru

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • What are the minimum system requirements for GB 4?

    What are the minimum system requirements for GB 4? I did search this forum but wasn't able to find a direct answer.
    I'm running version 3.0.4 successfully on a lowly G4 733 but I suspect this is as far as I can go.
    I'm updating to iDvd'08 and was also wondering if I can safely update to GB4 or not (from GB 3.0.7) on a G4 733 mhz Digital Audio. Any help would be sincerely appreciated. My guess is that I cannot but I'd like to confirm prior to attempting any further updates in GB.

    I try my best to play it safely; always. And you were right, everything worked on the ext. FW HD flawlessly ...... truly amazing software!
    (I did happen to check the activity Monitor w/in Utilities and it showed GB4 using about 60-67% of the CPU on a G4 733 ..... I'm assuming this is normal).
    Click Here
    Not sure if there's a correct order to opening these apps as there has been in former versions of iLife ..... however, this (as shown above) is the order in which I opened all apps, and all worked well.

  • What are the special conversions for time in update rules?

    What are the special conversions for time in update rules?

    Hello,
    Special conversions for time in update rules are automatically conversion rules.
    Example: If the cube contains calendar month and your transfer structure contains date, the date to month is converted automatically.
    Assign points if this helps,
    Regards,
    Jorge Diogo

Maybe you are looking for