What is the minimum Windows Experience graphics subscore for Photoshop CS6? to be efficient?

A friend has a low-end laptop with a graphics score of 3.4 and is experiencing issues attempting some filters. My laptop is reflecting 6.9 which is likely overkill, but I am wondering how to advise on what the minimum system should be.
If the Windowxs Experience graphics score is a poor predictor of minimum system graphics requirements, what should one look to for guidance?

Some of CS6 newer features require a GPU and openGL. You friends low end machine most likely does not have a supported GPC video chipset so GPU and Opengl will not be available for Photoshop use. This means some CS6 will not be available on your friends machine. Most Photoshop features do not require much when it come to video graph. The ones that do will not be available on your machine like oil painting filter. The filter will not be listed on his machine as far as I know. There is a list of tested GPU on Adobe site. Care must be used when reading the list thye do not go into details when it come to mobile laptops.

Similar Messages

What is the minimum trigger hold off time for the 5124

What is the minimum trigger hold off time for the 5124 i.e. what is the fastest i can collect data without streaming?
Mark Mutton
Electrical Engineer

Good morning Mark,
Thanks for contacting National Instruments with your issue, we'll try our best to resolve it for you as quickly and efficiently as possible.
The minimum trigger hold-off time for the NI PXI/PCI-5124 is 2 us with TDC disabled and 10 us with TDC enabled.
You can take a look at any other trigger specifications for the NI PXI/PCI-5124 below:
http://digital.ni.com/manuals.nsf/websearch/35D2892B4AC32E5A8625704A00590CFD
Best of luck with your project.
Sincerely,
Minh Tran
Applications Engineering
National Instruments

What are the minimum db user privileges required for CDC?

What are the minimum privileges required for the source data server user in order to to successfully implement CDC
Currently I'm getting an "Insufficient privileges" error when trying to start a CDC journal on a model. The error is happening on the step that creates a trigger on the table in the source schema.
Here's the situation:
The data server uses the user "ODI_TEMP" for its connection. ODI_TEMP has been granted select privileges on the desired tables in the source schema. When starting the CDC journal on the model for the source schema, ODI tries to create a trigger on the source tables. This fails since the ODI_TEMP user can't create triggers on anything outside of it's own schema. For obvious fundamental security reasons, we cannot give the ODI_TEMP user the CREATE ANY TRIGGER system privilege on the data source.
Journalizing is set up using JKM Oracle Consistent. ODI is 11g, DB is 11g.

Hi,
You can go for this
Grant CREATE ANY TRIGGER system privilege to ODI_TMP
Start the Journal , it will create triggers in ODI_TMP schema for the tables present in your source schema.
Now revoke CREATE ANY TRIGGER system privilege from ODI_TMP.
It will continue to work .. only when you are restarting the journal (due to adding or removing some tables in CDC) , you will be requiring CREATE ANY TRIGGER privilege.
Thanks,
Sutirtha

What are the minimum CPU and Memory requirements for R12 Vision instance?

We are in the process of trying to figure out what the minimum hardware requirements are for installing the R12 Vision instance. This Vision instance would only have 5 or less concurrent users. We may have to order a new server and we are wondering what the minimum CPU and memory would be? Oracle Support will not give us this information.
We aleady know how much disk space it will need.
Dan

Hi,
See these links.
A Primer on Hardware Sizing for Oracle E-Business Suite
http://blogs.oracle.com/stevenChan/2010/08/ebs_sizing_primer.html
What Are the Minimum Desktop Requirements for EBS?
http://blogs.oracle.com/stevenChan/2010/09/ebs_pc_clients.html
Also, please see old threads for similar discussion.
Hardware Requirements
http://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+Requirements&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Benchmark
http://forums.oracle.com/forums/search.jspa?threadID=&q=Benchmark&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Graphics card for Photoshop CS6

I have the p6112p desktop
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01756863&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
It has an onboard video card-- Intel GMA 3100. It appears that I can PCI Express x16 graphics card as well (which seems to automatically [?] shut off the on-board video card?).
I recently loaded Adobe Photoshop CS6 to my computer. When I try to use some of the features I get the error: "This feature requires graphics processor acceleration" and then recommends I check this feature in my CS6 preferences. When I try to check that box it is grayed out & says: "Photoshop detected an error in your display driver. Please update or reinstall your driver."
My driver is up-to-date & I'm guessing (this I have no other problems) that my graphics card is just too weak.
According to Adobe's website here: http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html
"The Mercury Graphics Engine (MGE) represents features that use video card processor, or GPU, acceleration. In Photoshop CS6, this new engine delivers near-instant results when editing with key tools such as Liquify, Warp, Lighting Effects, and the Oil Paint filter. The new MGE delivers unprecedented responsiveness for a fluid feel as you work."
They also list some cards that have been tested. Anyone know if I'm the right track? Do I need to add a better card? I don't want to spend a lot-- CS6 is already costing me $200. What card should I get that will work & fit. BTW, my computer has a 300W power supply (which I'd hate to have to replace as well unless I have no options).
Thanks so much for any help anyone can offer.

Hi,
If you followed the troubleshooting procedures and other suggestions listed at the Adobe link you provided then I would try a video card.
This EVGA GT 430 will work with the 300 watt PSU in your PC and it's in the Nvidia 400 range certified by Adobe.
The on board video processor in your PC doesn't support OpenGL 2.0. You need the G35 chipset and your PC only the the G33 chipset.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

What is the minimum required flash player version for FMP?

subject pretty much says it all.
and, does FMP degrade gracefully with older FP versions? e.g., does it use StageVideo only if a user has the required flash player version?

Oracle says that from 10g onwards, not need to have any other cluster software since it is providing CRS (cluster ready services) with 10g. However, having HACMP installed would be a good idea. I heard many problem, earliy release of 10g, aboug just using CRS instead of other clustered services.
Well, we are using SHARQ d240 storage, but, didn't required any raw partition, and also not using ASM. Basically, we are in a testing mode.
Jaffar

Can't use Graphics Processor for Photoshop CS6 on Windows 8

Hi,
I just got a fresh upgrade from Windows 7 to Windows 8 Pro (not beta) but then I can't use Photoshop that well. In the Preferences > Performance, I can't tick "Use Graphics Processor". I have an ATI graphics card and yep, I've already tried upgrading/reinstalling my graphics driver, even installing old ones -- and still, this doesn't solve my problem (even in its control panel, I can't seem to see the settings of the graphics card!)
Any ideas/suggestions on how to fix this? Thanks!

What display driver have you installed? And what is your card?
The ATI Catalyst 12.8 driver release claims to be compatible with Windows 8, though I haven't tried the combination myself yet.
Did you install Windows 8 as an upgrade or a clean install? The latter is always preferable.
I know a secret registry incantation that will force Photoshop to use the OpenGL subsystem no matter what, and I've used that to get GPU acceleration in a test installation in a virtual machine, but rather that put that forth just yet let's find out if you've done all you can the "above board" way first.
-Noel

What is the optimum number of CPU cores for Photoshop CC?

The title is the question.

To reinforce what Chris has said, keep in mind there's only one processor package in the new Mac Pro. There are cases where having two packages - such as in the previous design Mac Pro with dual Xeon x5600 series processors - can actually be a pretty big advantage.
That being said, I've put a lot of thought into how many cores a new Mac Pro ought to be configured with to run graphics software well, and I've come to the thought that 4 is too few and 12 is way too many. I believe the 3.5 GHz 6 core E5-1650v2 may actually have a slight edge over the 8 core E5-2667v2, because with 12 logical Ivy Bridge processors cranking full-on (with Hyperthreading) the memory bandwidth is actually already going to be taxed. And of course the 6 core is much cheaper.
There's a nice little Photoshop benchmark that's reasonably indicative of how well a system actually multithreads with Photoshop. It can be found here:
http://ksimonian.com/Blog/2010/02/24/improved-photoshop-benchmark-cpu-speed-test-for-both- mac-pc-free-radial-blur-filter-test/
I have a PC workstation with the same chipset as the pre-cylinder Mac Pro (dual Xeon x5690s in my case), and my best speed for that benchmark with Photoshop CC equals the best posted on that site: 8.3 seconds. People are reporting the new Mac Pro is scoring with that benchmark in the same vicinity - but not really faster.
Do some research yourself and see what various folks with the new cylindrical Mac Pro are scoring on that benchmark. I'd be interested to hear if your findings are like mine.
What's your system score, Chris?
-Noel

Graphic Cards for Photoshop CS6

I have been using photoshop CS5 and just upgaded to CS6. Now I get a message that my graphic processor card is unkown. My computer has an Intel family graphic card. This card was supported in CS5, and I can't find a list for CS6 compatible cards. Do I repalce the intel card or wait for a future upgrade?

Well, to be straight: You can probably wait for support for intel chipsets until your hair falls out. Sorry, but intel chips are notoriously full of hardware bugs and come with the most atrocious drivers, so chances that this will ever work properly are extremely slim, even if there may be updated drivers one day. Therefore the only logical course of action is to buy a dedicated graphics card from NVidia or AMD/ ATI. Even one from the 50 Euro budget tray will be better than anything you could ever hope to achieve with an intel onboard chip.
Mylenium

What is the minimum file system access needed to run ODI 10.1.3.4.0 client?

Hi ODI discussion folks,
I have a couple of questions from an Oracle partner that I'm trying to find a definitive answer for if possible. The partner is setting up ODI 10.1.3.4.0 for a customer who insists that the absolute minimum amount of access to the file system is granted due to corporate security policies.
I have checked the bundled ODI documentation but couldn't really find anything about file system permissions needed to run the ODI client. I was pointed towards the "Setting Up Security for an Integration Project — What to Consider" document but this does not mention a great deal about how much access to the file system is needed for the ODI client to function.
What the partner is asking is the following:
"1. What are the minimum file/folder permissions needed for the ODI client installation? I'm installing at xxxxx
and their machines have to be locked down as much as possible.
2. Say you have 3 users all wanting to run integrations etc and the Master and Work
repositories have been set up. An admin installs the ODI client but doesn't
create the connection to the Master repository. What are the minimum
file/folder permissions required on the client machine to:
a) create the connection to the repository
b) run any subsequent integrations?"
If anyone can advise on this then that would be much appreciated.
Regards
Craig Huggans
Oracle Hyperion Support
Message was edited by:
user648991

Hi Craig,
How are you?
Let me try to contribute a little....
1) The minimum requirement is for its own installation directory, there is no reason to have access to other directories unless if it is necessary to read files from some other directory at the client
2) Again only to its own install directory. The connection setting is recorded at \bin install directory. After that, all information are recorded at repository, there is no client work.
Be free to contact me by email or phone if you have any new doubt. You can get my email from my profile.
Does it respond your doubts?
Cezar Santos

What's the minimum setting for WL as a proxy server

What's the minimum setting of weblogic.properties for WL as a proxy server?

Hi Michael,
Recommended setting is the default setting which is 25 .dot.
If your situation is abnormal and you see message delivery throttling state to “4” when the following performance counters are high or if you expect any of you integration
process could have impact on following counters, then you can consider the suggestion by Microsoft. Don’t change the default setting.
High process memory
Process memory usage (MB)
Process memory usage threshold (MB)
You can see these counters under “BizTalk:MessageAgent”
You can gauge these performance counter and its maximum values if have done any regression/performance testing in your test servers. If you have seen these counters having
high values and causing throttling, then you can update the Process memory usage.
Or unexpectedly you’re process high throughput messages in production which is causing these counters to go high and cause throttling, then up can update the Process memory
usage.
The above two cases where I know my expected process usage (by doing performance testing) or suddenly my production server processing has gone high due to unexpected business
hike (or any reasons) which caused throttling, then do changes to default throttling setting.
Just changing the default setting without actual reason could have adverse effect where you end up allocating
more processing capacities but the actual message processing message usage ever is low means you end up investing in underutilised resources.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

What is the minimum browser requirements for Captivate 5? (Specifically Flash and Java)

I create a Captivate from and upload it to our LMS. When employees access the course it takes a long time for it to load. My IT department is asking what is the minimum browser requirements for Captivate 5? Specifically Flash and Java. This is occuring on PC's and a Citrix environment.

Hi there,
Thanks for reaching Adobe Community. Please accept my apologies for the same.
There is nothing in specific. When you say it takes a long time, do you mean on the LMS or locally as well?
Try updaing the Flash Player.
You can download the Falsh Player Versions from the below link:
http://www.adobe.com/support/flashplayer/downloads.html
Which browser you are using?
Also what objects you have in your project?
Does it have widgets or heavier graphics?
Also are you using any particular preloader? Have you tried using the default.swf preloader?
Thanks!

How can I determine what is the minimum SCN number I need to restore up to.

Say if I have a full database backup, I know I have file inconsistency, but I want to know what is the minimum time or SCN number a need to roll forward to in order to be able to open the database?
For example: I do a database restore.
restore database ;
RMAN> sql 'alter database open read only';
sql statement: alter database open read only
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 03/16/2009 15:00:04
RMAN-11003: failure during parse/execution of SQL statement: alter database open read only
ORA-16004: backup database requires recovery
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
I need need to apply archive log files. All references I find for ORA-00194 state the solution is to "apply more logs until the file is consistent " But "HOW MANY LOGS", or more apporaite up to what time or SCN? How does one determine what TIME or SCN is required to get all file consistent?
I thought this query might provide the answer, but it doesn't
select max(checkpoint_change#)
from v$datafile_header
MAX(CHECKPOINT_CHANGE#)
7985876903
--It applies a bit more redo, but not enough to make my datafiles consistent.
recover database until SCN=7985876903 ;
Starting recover at 03/16/09 15:04:54
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
using channel ORA_DISK_5
using channel ORA_DISK_6
using channel ORA_DISK_7
using channel ORA_DISK_8
starting media recovery
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=18436
channel ORA_DISK_1: reading from backup piece /temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1
channel ORA_DISK_1: restored backup piece 1
piece handle=/temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1 tag=TAG20090315T041716
channel ORA_DISK_1: restore complete, elapsed time: 00:02:26
archive log filename=/u01/app/oracle/flash_recovery_area/P1/archivelog/2009_03_16/o1_mf_1_18436_4vxd81yc_.arc thread=1 se quence=18436
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
I've discover I need to apply archive logs until this query reports all datafiles as FUZZY=NO , but this only works by guessing at some time periord to roll forward to, then checking the FUZZY column, and try again. Is there a way to know, I have to roll forward to a specific SNC in order for all my datafiles to be consistent?
select file#
     , status
     , checkpoint_change#
     , checkpoint_time
     , FUZZY
     , RECOVER
,LAST_DEALLOC_SCN
from v$datafile_header
order by checkpoint_time
Thanks,
Jason

The minimum point in time is the time when the last backup piece for datafiles in that backup was completed.
Your alert.log should show the redo log sequence number at that time.
You can query V$ARCHIVED_LOG and get the FIRST_CHANGE# of the first archivedlog generated after that backup piece completed.
A
LIST BACKUP;in RMAN should also show you the SCNs at the time of the backups.
You can also query SCN_TO_TIMESTAMP -- eg
select timestamp_to_scn(to_timestamp('15-MAR-09 09:24:01','DD-MON-RR HH24:MI:SS')) from dual;will return an approximation of the SCN.
Hemant K Chitale
http://hemantoracledba.blogspot.com
Edited by: Hemant K Chitale on Mar 17, 2009 9:41 AM
added the LIST BACKUP command from RMAN.

What are the minimum system requirements for GB 4?

What are the minimum system requirements for GB 4? I did search this forum but wasn't able to find a direct answer.
I'm running version 3.0.4 successfully on a lowly G4 733 but I suspect this is as far as I can go.
I'm updating to iDvd'08 and was also wondering if I can safely update to GB4 or not (from GB 3.0.7) on a G4 733 mhz Digital Audio. Any help would be sincerely appreciated. My guess is that I cannot but I'd like to confirm prior to attempting any further updates in GB.

I try my best to play it safely; always. And you were right, everything worked on the ext. FW HD flawlessly ...... truly amazing software!
(I did happen to check the activity Monitor w/in Utilities and it showed GB4 using about 60-67% of the CPU on a G4 733 ..... I'm assuming this is normal).
Click Here
Not sure if there's a correct order to opening these apps as there has been in former versions of iLife ..... however, this (as shown above) is the order in which I opened all apps, and all worked well.

What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?

What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?
SharePoint permission levels required for the user profile?
Does the user need top level permissions on the SharePoint site?
What other minimum requirements must be met for Outlook 2010 to synchronize successfully with SharePoint 2010?
TheDrape

Hi,
To synchronize these libraries and lists, you must have Outlook 2010 installed on your client computer and you must have Collaborate permission to the library or list.
You don’t need any permissions for the user profile.
I provide you a link about synchronizing SharePoint 2010 content with Outlook 2010 for your reference:
http://office.microsoft.com/en-us/sharepoint-foundation-help/synchronize-sharepoint-2010-content-with-outlook-2010-HA101881295.aspx
Thanks,
Rock Wang
Rock Wang TechNet Community Support

What is the minimum Windows Experience graphics subscore for Photoshop CS6? to be efficient?

Similar Messages

Maybe you are looking for