What is the modem connecting sound from TC?

When my mac has been asleep for a while, it takes forever to wake up and while I am doing this the TC makes a modem connecting sound. Any idea what this could be and if I need to return? All the other items using the wifi dont have a problem.

No sound should come from the TC.. what model is it??
Modem sounds are done on the old dial up type, is that what you mean by modem sounds??
What model TC and what model Mac??
Did  you just upgrade to Yosemite?
If the other items don't have problems it sounds like the computer rather than the TC at fault.

Similar Messages

  • What is the best Connection option from WebSphere to Weblogic?

    What is the best Connection option from WebSphere to Weblogic?
              We are trying to send XML messages from Websphere to WLS to active some
              services....
              any pointers, suggestions?
              Thx
              VJ
              

    Hi,
    One of my clients has an environment similar to yours with an internal pair of F5s and a pair used for the access from the internet. 
    I am only going to focus on the method using an F5 Load Balancer and SSL Offloading. the setup of the F5 will not be covered in detail but a reference to the documentation to support SharePoint and SSL Offloading will be provided
    Since you arte going to be using SSL Offloading you do not need to extend your WebApps to use separate IIS WebSites with Unique IP Addresses
    Configure the F5 with SSL Offloading
    Configure a Internal AAM for SSL (HTTPS) for each WebApp that maps to the Public HTTP FQDN AAM Setting for each WebApp
    Our environment has an additional component we require RSA Authentication for all internet facing Sites. So we have the extra step of extending the WebApp to a separate IIS WebSite and configuring RSA for each extended WebSite.Reference:
    Reference SharePoint F5 Configuration:
    http://www.f5.com/featured/video/ssl-offloading/
    -Ivan

  • Modem connection sound, short electronic sound oddity

    Hoping someone has an idea about what's happening on my 24" iMac. Leopard 10.5.8, iMac 2.4 GHz Intel Core 2 Duo, Chrome 13.0.782.112.
    I've rebooted several times in the past 2 weeks, but the problems described below are still occurring.
    About 3 weeks ago, I installed two new Iomega external hard drives - one 2 gb for external storage (firewire) and one 2 gb for Time Machine (USB). I bought the USB drive several months ago, before this model had firewire - just now got around to configuring everything.
    A few days later, I noticed what sounded like the dial-up connection sound from a modem - only I don't HAVE a modem. I am connected to Cox cable modem via ethernet. I have heard this sound randomly over the past 2 weeks and it seems to be coming from one of the external drives (I know that sounds nuts, but I turned the sound off on my iMac, trying to troubleshoot). A few days ago, another irritating sound began randomly appearing - kind of a two-note, electronic sound, do-do. Totally random - and this one can be turned off by muting my iMac. It doesn't seem to be happening in response to any specific action. I've observed both behaviors for days now, and can't tie either to anything I'm doing.
    The modem sound happens whether I'm using the Mac or not; the little irritating electronic two-tone sound only happens when I'm typing or browsing the Internet. I just this minute thought about the two-tone sound being connected to Chrome or one of the extensions, so I just disabled the 3 extensions but the sound is still happening. I'll try closing Chrome and trying a completely different extension. It's like an alert, but it's not a sound in my alert-sound choices and not the one I have selected.
    I prowled through all the system preferences, and all sharing is turned off. The firewall is turned off, with both Firewall logging and Stealth Mode turned on. I switched the firewall setting from "allow essential" to "set access for specific ..." I haven't heard the modem sound again, but that's been happening very randomly and sometimes days apart. At least, when I'm in the room.
    The only 3rd-party apps in Preferences are Perian, Flip 4 Mac WMV, and Adobe Version Cue.
    No other apps except Chrome are open right now. Bluetooth and Airport are turned off. The little phone handset icon at top right, when clicked, indicates that no modem configurations were found. I checked the firewall log, and mostly see attempted stealth mode connections via TCP or UDP (?) from China, primarily (used whois to backtrack IP addresses). The new attempts don't correlate to the two-tone sound.
    Not sure what else to check/try ... hoping someone has an idea. I could have hit a funky key-combo (I type very fast) but the two-tone sound is so random and intermittent, that doesn't seem like it could have caused its sudden appearance. And I am more worried about the modem-connection sound - can that possibly be coming from my Cox cable modem, and/or be an external connection attempt or successful intrusion? My system has never made the sound before - both sounds began appearing when I installed the two new external drives. I "ejected" the external HD that isn't the Time Machine HD, but the two-tone sound is still happening.
    Thanks for any assistance!!
    Deb

    Hi BD - Thanks for the speedy reply, sorry for my own delay (life happened). The "external hard drive logging in" is solved, and you won't believe this - there is a new commercial that features the sound of a dial-up modem connecting to the Internet, and this is what I was hearing. The television and my computer desk are located at the end of a long living room, and I always heard the noise from another room. When I'd come in, the hard drive would be spinning up so all I could assume was that the HD and the noise were related. Geez! It didn't seem at all possible, particularly since I know a HD does not have speakers and I'd muted the Mac, but who would have realized it was a commercial?!?! I was finally sitting at the computer a few days ago, and the commercial came on. Light bulb went on, and the rest is tech-support-funny-story history. No wonder the log activity entries don't correspond to the commercial airing despite the fact that it began airing around the same time I installed the new HDs.
    The little two-tone sound was apparently tied to a tab in Chrome - I tried a diff. browser and had no noise, went back to Chrome and it was still there. I began closing tabs and after I'd closed several, I realized the noise was gone. Who knows on that one. No idea why I have the phone handset icon - didn't migrate anything to this machine (still on 10.5.8), but it isn't hurting anything and has always been there. No faxing setup. Actually I need a good website for faxing PDFs - but that's another story. No landline here at home.
    Thanks again for your reply and attempt to help me! There is no way, I bet, with ANY amount of troubleshooting that I'd have solved this - glad I didn't waste any more time trying things.
    Deb

  • What is the direct connect method for transfering photos from my macbook pro to my iphone without using iTunes syncronization? (iow: a simple photo copy from mac to iphone?)

    I feel like I should know the answer to this. I can't believe it is a hard question.
    What is the direct connect method for transfering photos from my macbook pro to my iphone without using iTunes syncronization? (iow: a simple photo copy from mac to iphone?)
    Easy? Right?
    Just plug my iphone in to a mac and copy a photo from the mac to my iphone.
    I don't have internet access - I can't email it, or mobileme it, or dropbox it.

    iTunes. Other than that there is no direct method. However, do try the iPhone forums.

  • Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

    Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

    iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
    You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it.

  • What are the pin connections from 7764 to stepper motor drive

    what are the pin connections from UMI 7764 to stepper motor drive? I use PCI 7340 controller. Third party driver  is not branded, but assembled.  It has 3 inputs, one for (A,A/) one for (b,b/) one for enable, apart from ground pin.

    Dear enigmata,
    Here is a link to the UMI Manual that describes the signal connections:
    http://www.ni.com/pdf/manuals/321941b.pdf
    What you really need is the documentation for the input of the "translator" mentioned on the left side of the last diagram you posted. It is still not possible to tell which of you drive inputs correspond to step and direction (or CW, CCW) because in the circuit that you posted, these signals have already been converted by other circuitry in the drive to the A, A/, B, B/ output signals for the stepper motor.
    I agree with Jochen: Without the documentation you will need to test it out as he described in his last post.
    Best Regards,
    Nate Holmes
    National Instruments

  • IPad 2 has slow playback.  What is the fix? Aside from getting Galaxy Tab...

    iPad 2 has slow playback.  What is the fix? Aside from getting Galaxy Tab...

    Playback quality/responsiveness is a function of network speed. If you have slow playback you need to checkout your network (ISP) and the characteristics and configuration of your networking equipment (WiFi router, etc.)
    YouTube performance is excellent on my iPad connected through a high-speed cable modem. What kind of network do you have?

  • My mac book wont recognize my ipod. My Ipod will make the initial connected sound saying its charging but otherwise theres no way of finding the Ipod anywhere on the computer or Itunes.

    My mac book wont recognize my ipod. My Ipod will make the initial connected sound saying its charging but otherwise theres no way of finding the Ipod anywhere on the computer or Itunes. Please help with anyway I can get the Ipod recognized so I can download music from Itunes to my Ipod. Thanks in advance.

    Hello xerxes.nashion,
    It sounds like your iPod is not recognized by iTunes or your MacBook Pro.  I recommend following the steps in the article below for an issue like this:
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/TS1410
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT2822 What is the better Connection on Apple TV v2, Ethernet or Wifi 802.11n???? does not support with ethernet gigabit?

    What is the better Connection on Apple TV v2, Ethernet or Wifi 802.11n????
    Does not support with ethernet gigabit?

    If you have stable wifi with good connectivity it should work fine - in reality many people struggle with wifi.
    I was plagued by interference issues with wifi whenever the microwave was used and would always use ethernet now as my first preference for stability.
    As the house is not wired for ethernet several years ago I tried mains powerline network adapters that are made by many companies.
    I use these from Devolo currently:
    http://www.devolo.co.uk/consumer/81_dlan-500-avmini_starter-kit_product-pictures _8.html?l=en
    They are excellent and you can create a wired network in minutes without running long lengths of cable.
    As with wifi they never achieve the highest rated speeds and are dependent on the wiring quality but are more than adequate for HD streaming to multiple AppleTVs.
    Many other manufacturers produce these eg Belkin, Netgear etc as well as lesser known brands.
    AC

  • What is the fluttering noise coming from my desktop?

    what is the fluttering noise coming from my desktop?

    Probably a fan.  Could be hard drive noise, a CD or DVD that has a label on it.
    Can you describe the sound more fully, what it sounds like, when and how often it occurs?

  • What are the benefits of buying from Apple as opposed to other retail stores?

    What are the benefits of buying from Apple as opposed to other retail stores?

    You can buy from an Apple store, which has a 14 day return policy.
    You can buy on-line from Apple and get a new or refurb model (less $), and get engraving if you want it.
    Some retail stores have a more generous return (30 days?) policy.
    You can buy from an on-line Apple Authorized Reseller. I bought (with free shipping) mine from MacMall because I didn't have to pay sales tax. I paid with my American Express CC to get, for free, an additional 1 year warranty.
    Regardless of where you buy you still get the 30 day Apple Care and 1 year warranty. You can extend, for $, the Apple Care for 2 years. Or you can buy, for $, Apple Care +, which provides accidential damage repair insurance. There's also some 3rd party sources to buy the accidential insurance.
    Some retail stores and on-line stores offer a small discount or add a bonus item.
    It's your choice. Find the best deal.
     Cheers, Tom

  • I have Mac os x with 10.4.11 and i want to upgrade, what is the next operating software from a 10.4.11 for a g4

    I have Mac os x with 10.4.11 and i want to upgrade, what is the next operating software from a 10.4.11 for a g4 and can it be done on a g4

    If you have a processor of 867 MHz or faster and a minimum of 512 MB of RAM, you can run OS X Leopard, updated to 10.5.8.
    That's as far as a G4 can go.
    Check eBay for discs:
    http://www.ebay.com/sch/i.html?_nkw=Mac+OS+X+10.5+Leopard+Retail&_sacat=0&_odkw= Mac+OS+X+10.5+Leopard+Full+Retail&_osacat=0
    No Snow Leopard, 10.6x or Lion, 10.7x.
    they won't run in a PPC Mac.

  • Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears

    Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears. The error further displays "
    type: Exception report
    message:
    description: The server encountered an internal error that prevented it from fulfilling this request.
    exception:
    ServletException Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
    root cause:
    NoClassDefFoundError Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
    note: The full stack trace of the root cause is available in the logs.
    Has anyone experience this issue? Any solutions? Your assistance is greatly appreciated!

    Hi Mesut,
    you can refer the link for migration
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx/10xcucrug010.html
    regds,
    aman

  • What is the best bluetooth adapter from a mac to a printer that is not wireless?

    what is the best bluetooth adapter from a mac to a printer that is not wireless?  Using a Canon Pixma 850

    How to burn MTS to DVD on Mac OSX:
    http://www.iskysoft.com/create-dvd/mts-to-dvd-mac.html

  • What is the purpose  of Date From and Date To In Oracle HRMS ?

    hi
    I have doubt on
    What is the purpose of Date From and Date To In Oracle HRMS?
    Thanks

    Where do you see these fields? Please give full details (eg, the navigation path).
    If you're referring to Effective Start Date and Effective End Date (effective_start_date, effective_end_date) these are two fields that appear on many HRMS entities. They're used to store dated history over time. For example:
    14-Jan-2009 to 19-Apr-2009 - Pam Stephens
    20-Apr-2009 to date - Pam Erickson
    In this example Pam got married on the 20th April 2009 and changed her surname from Stephens to Erickson. Here the history of changes are kept so that if we date-track to any time prior to the 20th April 2009 we'll see Pam Stephens and if we date-track on or after the 20th April 2009 we'll see Pam Erickson.
    Check out the following Oracle Support article for more information:
    How Date Track Works [ID 177733.1]

Maybe you are looking for