What is the most sensible way to extend a wifi signal. I am in a cinderblock house and I have to buy something that will give me a single network but added range from my airport extreme base station.

Use an Airport Express. Configure the AEBS to allow it's wireless network to be extended. This is a dropdown menu option under the Wireless tab. Configure the Airport Express to Extend an Existing Network also under it's Wireless tab. You will need to provide the name of your network used in the AEBS as well as the network's access password.

Similar Messages

I have an old airport that still works, can you use it the same way that one uses an airport express to extend the range of an airport extreme base station?

It would save me a few bucks if I could use an old airport that I have to extend the range of a new airport extreme. My concept would simply be to use the old Airport the same way I would use a newer Airport Express as a slave repeater. Is this doable?

Both the new AirPort Extreme and older AirPort Express will have to be configured using Apple's WDS settings to provide more wireless coverage.
Here are the downsides:
WDS operates only at "g" wireless speeds, so you will lose all of the faster "n" wireless capability of the new AirPort Extreme
WDS cuts the bandwidth on the entire network in half, so you will have a "g" wireless network running at half speed.
WDS is difficult for most users to configure because it is easy to make a mistake and hard to recover without starting all over again
Bottom line......Saving a few bucks will be very costly in terms of performance on your network.

What's the most efficient way to extend product and catalog classes?

If I have additional product and catalog properties in a new database table, should
I create a new class and extend the ProductItem and Catalog classes or should
I manage these properties via the set/get property methods on the existing classes?
Is there a difference in performance with the two approaches?

Performance wise using the set/get property methods is going to be more
expensive... However, I would recommend the property approach. You really
don't want to modify or extend the provided source code. I have done this
and the approach works out fine...
Another approach that I have used is to create additional tables and classes
that key of the product and catalog classes. Again with the intension that
we don't modify provided stuff... For example, we implemented related
products using this approach.
"Bill" <[email protected]> wrote in message
news:3fbcf598$[email protected]..
>
If I have additional product and catalog properties in a new databasetable, should
I create a new class and extend the ProductItem and Catalog classes orshould
I manage these properties via the set/get property methods on the existingclasses?
Is there a difference in performance with the two approaches?

I have a AirPort Extreme Base Station with Gigabit Ethernet 802.11n ?

I have the 802.11n Airport Extreme Base it went bad so Apple Sent me a new one to put into my
office where I have a iMac 24" 2.4ghz with really fast internet
I also HAD a AirPort Express Base Station with 802.11g and AirTunes G not N so when I received the
new 802.11n Airport Extreme I sold the Airport Express 802.11g now my Macbook Pro 17" 2.33mhz
which is in my family room and that is also where the Airport Express with iTunes was located
now my internet is like really slow on the MBP 17" I have 5 bars in the pizza menu bar but my
internet speed is really BAD on the MBP 17" and I have 16mg speed on the net
+BIG ? DO I NEED TO BUY A 802.11n AirPort Express Base Station with 802.11n and AirTunes??????+
TO EXTEND THE RANGE OF MY AirPort Extreme Base Station with Gigabit Ethernet Which is in my
Office where my iMac 24" 2.4ghz is located and the internet zooms on the iMac but not my
my Macbook Pro 17"
Please help as I don't want to spend money on another 802.11n if it will not extend
I
Message was edited by: macman60

So you agree to the lose of the Airport Express removal has caused me to lose enough of a signal to make the Internet...
Sorry but I'm not sure what this long run-on sentence is trying to say.
You asked if the network could be wirelessly extended and that is what I replied to.

Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
Thanks

The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
Assuming your AE is gen3 or greater.
You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
If your AE is G wireless or earlier model.. really the time has come for replacement.
If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

What needs to be done to avoid WIFI drop-offs with Apple AirPort Extreme Base station with Extended Wifi

Hi there,
can anybody please advise me what needs to be done to avoid WIFI drop-offs every half an hour or 1 hours.
I use voip phoe calls a lot using my WIFI, However my AirPort WIFI connection drops-off while I am in the middle of WIFI VOIP calls. This is causing significant disturbance in my family.
Please assist.
In details, I have extended my WIFI range using 2 Apple Airport Extreme Base Station.
Main Base is - A1408 9 (5th Gen), and I have extended my WIFI in my L shape house by connecting another Apple AiPort A1354 ( 4th Gen) with AA1408.
Note1:
> when I am close to A1408 my iPhone4 connected with A1408 automatically
> When I am close ot A1354 , my iPhone4 connected with A1354 automatically.
Note2: these drop-offs never occurred when I had only 1 Apple AirPort Extreme Base station WIFI
I think, this Auto switching causing the slight drop outs in my Wifi when I am on the VOIP call.
Do you think that something is going wrong with my Apple AirPort Wifi extended?
Much appreciated

To help eliminate drop-offs you need to ensure that your extended network is operating at its peak bandwidth performance. Base station placement is critical in an extended network. Please check out the following AirPort User Tip for details.

HT4259 Extending AirPort Extreme BASE STATION range

I am using an older (2006) 54Mbps AirPort Extreme Base Station and want to extend the range. I am experiencing issues with dropped or slow signals in rooms that I would consider tough to reach (basement for example). Can I use an AirPort Express to extend the range of the WI-FI and how exactly is this done? Or would I be better off updating the AirPort Extreme Base Station? It's worked flawlessly for 6 years, just have more wireless requirements.
Thank you all in advance.

I am using an older (2006) 54Mbps AirPort Extreme Base Station ... Can I use an AirPort Express to extend the range of the WI-FI and how exactly is this done?
The short answer is yes; the longer answer is that the only way to "wirelessly extend" the range of your 802.11b/g-only Extreme is to create a Wireless Distribution System (WDS).
Not only is a WDS a tedious pain to set up, even for experienced users, its performance is likely to be disappointing. It may not even solve your dropped signals or slow throughput.
There are better ways to extend your wireless range. By far the best and least expensive alternative is to connect an additional base station to your existing Extreme with an Ethernet cable. If you don't want to do that, and you understandably decide against a WDS, then your remaining alternative is to buy a newer, 802.11n capable Extreme or Express. They can use Apple's "extend a wireless network" feature that will eliminate nearly all the disadvantages of a WDS.
Read this to determine how to create a WDS: http://support.apple.com/kb/HT4262

What's the most recent opinion about Time Machine backups to Hard Drives connected to the USB port on the Airport Extreme Base Station (5th generation)?

I have been searching the Apple communities and Internet for a final answer. I just bought an Airport Extreme Base Station (5th generation) and LaCie d2 quadra 1TB external drive as a replacement for TWO failed Time Capsules, neither of which Apple would replace due to failed power supplies. I formatted the 1TB drive using Disk Utility (Mac OS extended (journaled)) from my MacBook Pro, and then plugged into the Airport Extreme Base Station USB port. The Airport Extreme Base Station see the Hard Drive, and my MacBook Pro sees the Hard Drive in my finder under shared resources. Time Machine, however, does not see the drive. Is there a solution for this problem? If Time Machine will not work, is there another software product out there that will work, like Carbon Copy. Having to plug the backup drive into the USB port of your laptop every evening kind of defeats the purpose of having a laptop. Any suggestions would be appreciated.

Keeping in mind that this is not supported by Apple, I have been successful at doing the following:
1) Format the entire drive (1 Partition) as Mac Extended (Journaled). You must click in Options and set it as a GUID Partition Table (first option)
2) Plug drive via USB to AEBS
3) Using Airport Utility, use Manual Setup, then under Disks, select the new Disk and click File Sharing, then Enable File Sharing and Secured Shared Disks (recommended, of course). Other settings are up to you.
4) IMPORTANT: you will NOT see this Disk in Time Machine until you open Finder and double-click on it. You will not need to do this again (hopefully).
5) Now it should appear in Time Machine. Remember to exclude any large files like Virtual Machines, since they will be re-backed-up (is that a word?) every time it changes in any way.
6) Remember that the first backup (over WiFi) is the longest. Leave the computer alone during this period.
Good luck, and let us all know how it went for you!

Can I use an Airport Extreme Base Station from the USA in Europe ?

A friend of mine gave me an Airport Extreme Base Station from the USA to Germany. When I hook it up to my PB by ethernet cable the Computer can't find the Base Station at all. If I use my Sonnett Aria Extreme PCI card it finds the station but in the pop-up menu asking in which country I want to use the airport station it only offers North and South American countries. How do I go from here and why is my PB not finding the station when I'm using cables ? Has it something to do with different models for different countries ? Any idea ? Thanx

Here you go ...
Changing the Radio Channel on the AEBSn
Either connect to the AEBSn's wireless network, or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Setup, check these settings:
AirPort - Wireless
o Channel: <Use Automatic or select a preferred channel>

Hi Everyone, I am Sreedhar , I need to extend the Wireless Network which is connected through cable in Airport Express, Without Airport Extreme Base Station is there any way to extend my WIFI

Need Help

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

If I set up separate 2.4 and 5GHz networks on my Airport Extreme base station, is it possible to extend just the 5HGz network?

If I set up separate 2.4 and 5GHz networks on my new Airport Extreme base station, is it possible to extend just the 5HGz network with another AirPorrt Extreme that has duel, but not simultanous, frequencies?

Yes, configure the "extending" AirPort Extreme to connect to the 5 GHz network name when you set it up.
Temporarily, locate the extending AirPort Extreme close to the main Extreme for the setup, then move it to the remote location.
But, be advised that it is not easy to extend 5 GHz using wireless. You will almost need to have line-of-sight between the two AirPorts for this to work.

I told my wireless network to forget two airport expresses so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. Does "forget" mean forever? How to reset?

I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. The network does recognize a totally new 2nd gen express. Does "forget" mean forever? How to reset?

The network does recognize a totally new 2nd gen express.
Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
Assign a simple name.....something like 2ndGenExpress

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Using the WAN port as a "LAN" port on the Airport Extreme Base Station...

Hi everyone,
I'm re-building my home wireless network and I'm doing so in preparation for the Slingbox AV I ordered last week. Here's my current setup:
I have a DSL modem attached to an Airport Express (802.11n) in my office broadcasting my internet signal. I have an Airport Extreme Base Station (802.11g) set up in my living room as a WDS extender. I currently use the base station in my living room to connect the DishNetwork ViP722 DVR to the internet and allow me to set recordings remotely on my iPhone when I'm away from home. I use the LAN port on the base station to do this, and now with the Slingbox on the way (should be here early next week), I'm wondering what I need to do to make an internet connection available for the Slingbox AV.
My question: Will I be able to simply use the WAN port as a "LAN" port since the Airport Extreme Base Station is being used as a WDS? It'd be awesome if the WAN port would become, essentially, a LAN port since it isn't being used.
Thanks in advance for your advice and insight!

slugoo wrote:
My question: Will I be able to simply use the WAN port as a "LAN" port since the Airport Extreme Base Station is being used as a WDS? It'd be awesome if the WAN port would become, essentially, a LAN port since it isn't being used.
I'd be surprised if that worked. The operation of an AirPort base station depends on keeping the WAN port and the LAN port(s) separate, as those normally are on two different networks.
You might consider buying an Ethernet hub or switch, which would allow your AirPort Extreme's LAN port to be shared. Here's an example of an inexpensive one:
http://www.bestbuy.com/site/olspage.jsp?skuId=7169244&st=ethernet+switch&type=pr oduct&id=1110266457435

Airport Extreme Base Station as Extender to Airport Extreme Time Machine

I have tried this a few times, but to no avail: Tonight I purchased an Airport Extreme Base Station (AE) to set up as an extender to my Airport Extreme Time Capsule (AETC). The Airport Utility finds the router and goes through set-up seemingly fine, with green lights on both. Then shortly after (within a minute) the AE reboots on it's own, followed by the AETC rebooting (again, on it's own) and this occurs repeatedly. I reset the AE completely and run through the set-up and the same thing occurs. I've also done soft resets to the AETC. Long and short of it - the restarting discontinues once I unplug the power cord from the AE. Then the AETC resumes as it has - providing fine wifi and speed. It appears the AE rebooting on its own makes the AETC reboot. Any ideas? Thanks!

howto - extending airport 802.11n networks
Pre-Requistites
1) Ensure all have most recent firmware - 7.7.3 for AC devices, 7.6.4 for 802.11n devices
2) Have most recent Airport Utility (OS X 10.7 thru 10.9, use 6.3.2, IOS6/7 use 1.3.3)
3) Only have the Primary Airport/TimeCapsule powered on for now
Set up the Primary/Anchor Airport Base Station
1) Do this over ethernet - ensure that the Modem and TimeCapsule/Airport is connected on the WAN port
2) You'll be prompted by Airport Utility to name the Network and the Base Station
Network is the SSID of the Wireless LAN
BaseStation is the name of the Airport/TimeCapsule
3) You'll be prompted for a password - this will be for both the WLAN and the Base Station on initial setup
Note here - there are at least three passwords to worry about post setup
a) BaseStation Management - in this how-to, this will be carried thru to the extended basestations
b) WLAN Access
c) Disk Access for TimeCapsule and AirDisk
They can be same or unique, up to you...
Configure the Airport/TimeCapsule for WiFi/Network
4) Select the named BS in Airport Utility - click the 'edit' button
5) Review 'Base Station' Tab
5a) BaseStation Name
5b) BaseStation Password - you can change this now if desired, this does not affect WLAN password
6) Review Internet Tab
6a) set as appropriate for your network - e.g DHCP or other depending on needs
6aa) focus here is getting the primary BS set up first
6b) Click Internet Options - this is IPV6 setup - for now...
6ba) Set to Link-Local Only, click save, you can go back and change this later if needed
7) Go to Wireless Tab
7a) Set Network Mode to "Create a wireless network"
7b) Check Wireless Network Name
7c) Wireless Security - recommend WPA2 Personal - this is important as you'll need this later
7d) Wireless Password - the password entered in step 5b above is what is used here, feel free to modify or not - if so, note this
7e) disregard Enable Guest Network for now
7f) Click Wireless Options
7g) ensure 5Ghz network name is unselected
7h) Country as appropriate - since I'm in California, I choose United States
7i) Leave 2.4Ghz and 5Ghz Channels as "Automatic" for now, click save if needed
8) Click Network Tab
8a) if this is your primary router - use DHCP and NAT
8b) Click Network Options
8c) DHCP Lease - I use 12 hours
8d) IPv4 DHCP Range - every here is a bit different, but my recommendation for most folks
192.168.1.100 to 150
Use what works for you, keeping in mind that the AP Extreme, TimeCapsule, and 2012 Airport Express can handle 50 clients, max
8e) Ensure that Enable NAT Port Mapping Protocol is selected
8f) can worry about Enable default host at: [] later, this is the DMZ'ed host
8g) can choose to enable IGMP Snooping or not - doesn't affect the primary setup
8h) click save
TimeCapsule Only - for Airport Extreme, worry about AirDisk later
This is TimeMachine support, along with FileShares
9) Select Disks - you should see a partitiion named "Data"
9a) ensure that Enable file sharing is selected
9b) ensure that Share disks over WAN is unchecked for now
9c) Secure Shared Disks:
Choices here -
device password - noted in step 5b above
disk password - this will be for all LAN clients that can see the Data Partitiion
accounts - you can set up separate users and passwords - this is beyond scope of this how-to
Recommendation if using as TimeMachine only, use a disk password - note this as you'll need it for timemachine on the clients
Save Settings to the Airport/TimeCapsule
10) Click the "update' button
The Airport/TimeCapsule will restart
Everything now should show green and shiny - open a web browser and attempt to go to Apple/Google/Yahoo, to ensure that you've got network connectivity
Reviewing things in the Airport 6.3 utility, you should see your base station and the Internet - both with green status
Once done here, let's extend the Wireless Network
Note - again, it helps to be connected to the primary base station on ethernet, wireless makes things, erm, challenging
11) with another decive - Mac/iPad/iPhone/iPod Touch or PC, ensure that Wireless LAN is working on the primary AP/Basestation
Once this is done, then proceed to the next step
Enable the "Extended" Airport - can be another TimeCapsule, Airport Express or Airport Extreme
For purposes of this discussion - assume all ore 802.11n capable at a minimum, so this applies towards more recent gear
a) Airport Extreme AC (2013)
b) Airport TimeCapsule AC (2013)
c) Airport Express 2012 Dual-Band (Looks like AppleTV)
d) Airport Extreme 802.11n 5th Gen, TimeCapsule 4th Gen
e) Airport Express 802.11n - similar to the 802.11g variant, looks like a MacBook Pro power adapter
Assumptions here is that the extended airport is factory defaults - see link below for more info:
http://support.apple.com/kb/HT3728
Once this is done, plug in the Airport that is intended for extending the wireless network
after about a minute or so, you should see a blinking orange light, this is normal...
In Airport Utility, you should see in the upper left hand, "Other Wi-Fi Devices (1)" - click this, if you don't see this, exit and restart Airport Utility
12) clicking on the button, you should see an entry menu as "Airport Extreme xxxxxx", select this
13) Once selected, you'll see "This Airport Extreme/Express/TimeCapsule will be set up to extend "Primary Base Station"
14) Enter the name for this base station - it should be unique from the name of the Primary noted in step 5a
15) Click "next"
16) Should see "setting up this base station to wirelessly extend..."
you'll see some progress messages.. this is the two basestations handshaking....
If successful, you'll see the BaseStation named in step 14 as "is now wireless extending "base station named in (step 5a)"
STOP - the Airport is now extended, repeat steps 11 thru 16 for each addtional Airport
For advanced features - such as port forwarding, DMZ, IPv6 Tunnels, Back to my Mac, etc - perform this only on the Primary Base station outlined in steps 1 thru 8h
Good Luck!

What is the most sensible way to extend a wifi signal. I am in a cinderblock house and I have to buy something that will give me a single network but added range from my airport extreme base station.

Similar Messages

Maybe you are looking for