What is the most unto date system software for the iMac?

Can anybody please let me know this?

Look here for your specific system
http://support.apple.com/kb/HT1159
Sorry, pasted the wrong link - see mende1's post below for the right one

Similar Messages

The Best Data Recovery Software for Mac OS X 10.5.8 Leopard?

What is the best data recovery software for Mac OS X 10.5.8 Leopard?

A backup.
After that's there's the usual list, DataRescue, FileSalvage. General reading on this topic - http://www.thexlab.com/faqs/datarecovery.html It would help to know the actual problem since sometimes a straight answer to this kind of question isn't always the way to a solution to the real issue.

Data Recovery Software for the Zen Vision M

Data Recovery Software for the Zen Vision M:
Has anyone had any success recovering lost sound files from a Vision M, with software, physical repair services, or otherwise? Does anyone claim to be able to recover information from these devices?
The data recovery programs I have tried fail to recognize the dri've, since it doesn't show up in list of dri'ves for some reason (Is there a way to make this show up?). Any suggestions/ recommendations would be greatly appreciated as I lost over a year of recordings after an unexpected forced reformatting. How would one even go about finding someone for this job?
Thanks, GW

Haven't really tried the data recovery so I would like to know more about this one too.
http://storeyourpicture.com/images/s...lectronics.jpg

Issue trying to install Oracle Data Access Software for Windows

I am trying to install the Data Access software on one of my many workstations and am having an issue with one of them. When the installer comes up it gives me an error:
Invalid Inventory List and it exits.
What do I have to do to get it to recognize my oracle home?

Most probably you have hit this issue:
"If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
~ Madrid.

Issue while Installing Oracle Data Access Software for Windows

All,
Iam getting the following error while installing Oracle Data Access Software for windows. Iam installing in WindowsXP, with Oracle 9i release 9.2.0.7.0 DB and client in the same Box.
It shows
The Specified Key key was not found while trying to GetValue
* Stop installation of all Products
* Stop installtion of this componenent only.
Kindly let me know why this error is showing up.
Regards
Ramesh

Most probably you have hit this issue:
"If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
~ Madrid.

Which system software for a Xserve G4?

which system software for a Xserve G4?

The highest you can go is 10.5.8 server. If you need ACLs, then go this route. If you can run with POSIX inheritance, then you can stay with 10.4.11.
If you are behind auth proxy and go with 10.5.8, watch out for the runaway swupdate process.

I'm looking for software for my iMac to use to copy old VHS movies onto DVD and old records (digital turn table) in CDs. Recommendations please?

I'm looking for software for my iMAC to use to copy old VHS movies from a VCR into DVDs and records from my digital turn table into CDs. Any recommendations?

For the VHS movies, try googling Elgato - they make a number of USB devices that are supposed to be able to do this, but check what formatting options they offer : you will want a device that converts directly into .MOV files (to play in QuickTime), or into H.264 for iTunes / iPods, etc.
As for the vinyl records - first you need a device that will convert the analogue output (phono) into a digital form and will connect via FireWire or USB. The Griffin iMic is one such USB device (if still available?). From there you can use the free Audacity download to read in the signal and convert to a suitable format, e.g. MP3. (You will need to use SysPrefs / Sound to switch to an external audio device, instead of your Mac's built-in mic.)
(Wait - you said "digital turntable" - software already on your Mac? How do you use a virtual turntable to play vinyl?? Unless what you really mean is an analogue turntable that has a CD writer in it, or a USB connection to connect the turntable's DAC output to a computer?? In which case, either use your turntable to burn CDs, or connect via USB and the free Audacity software to convert the signal to music tracks and output as MP3.

What is the best antivirus/malware protection software for my iMac desktop

What is the best antivirus/malware protection software for my iMac

None is needed.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

What's the best external dvd drive (including Mac software) for an iMAC

Would like to know.

Assembly of External Drive Solution
1) Take out the optical drive (DVR-112D-BK) from its box, and slide it into the tray mechanism, and align the black plastic facia (the front of the drive) with the front edge of the case so it's a flush fit, so it looks like it belongs there. There are 4 small phillips head bright, polished screws in the kit...put those aside for now, but you'll use those to fasten down the drive in the tray after everything's buttoned up
2) Attach the 40-pin/80-wire ATA/100 cable to the drive. It *only goes on one way*, as you'll see a notch at the top that fits into the notch in the back of the drive...you can't install it but one way, the right way. BE CAREFUL to not bend those pins, and get all 40 pins aligned before you push it on. Secure it well, pushing it *all the way in*; it has to be 100% onto the pins.
3) Attach the power Molex connector to the drive; it also only fits one way. Once again, push it in *all the way* so it "snaps" a little...you'll feel it do that, and then it's secure.
4) Attach the 4-pin sound board pigtail to the small 4-pin slot, to the LEFT of the ATA/100 connector/cable. It can be fitted either way, but be sure to fit it with the notch on the pigtail toward the left side of the drive
5) Make sure that everything's hooked up, and do a final alignment of the drive in the tray (it should move in the tray with a little force from your thumbs, easily), again making the front aligned with the front of the case, so it looks OEM nice.
6) Now use those 4 phillips screws to secure the drive onto the side of the tray. Don't overtighten the screws! Just a snug torque is good.
7) Take the silver case cover and slide it over the tray, until it's snug with the back of the tray. It should be *perfectly aligned* and fully compressed so there's no gap between the case and the tray...be careful closing the tray on the LED's power wires by the way...just tuck them inside of the tray so when you close it the thing doesn't get in the way.
Finally) Use those two long black screws to secure the tray and the case aluminum cover through the two holes *in the back of the tray*, and again...*don't overtighten those screws!*...just a snug torque is all that's needed.
You're done!
Now hook it up to your Mac via FireWire, and do an Apple System Profiler report and *make sure it's supported* by your System: highlight "Disc Burning" and see if it says "Apple Shipped/Supported" in the right display window, which it will say if you're using 10.4.3 or higher. If you're running Panther 10.3.9 you have to use Patchburn.
Basically, what PatchBurn does, is generate a new System Profile for the optical drive in question, and it does so for a huge variety of drives, not just Pioneer drives. Once the profile is in your System, simply restart your Mac, and Viola! Instantly your new drive will be available to work with all the iApps, that is iTunes, iMovie, iDVD etc, and it will be integrated with all Finder functions also. That means the drive will then function with Disk Utility's "Burn" commands in all applications, and Disk Utility itself.
Please don't worry if you try to use your new drive combo and it doesn't work, or isn't recognized by your Mac...just do the above procedure with PatchBurn v3.x for 10.3.x, or v4.x, for 10.4.x, and all will be fine!
http://www.patchburn.de/download.html

Data Recovery Software for Mac.

I have 2 questions regarding data recovery from an external drive (WD My Book Essential).
1. During a Bootcamp install, the backup taken using WD Smartware software has been replaced by a Windows folder and I cannot read the drive after reinstalling SL on my Mac Mini to retrieve my backup. If I erase the drive (as the software is asking me to do), can I then recover the lost backup files using data recovery software or will the file system on the external drive cause a problem. (Format is NTFS)
2. Which data recovery software is best for for use on a Mac? Or do I recover using Windows software instead?
Thanks.

If you want to recover data from a Windows partition, you probably need to use Windows recovery software. I'm not aware of any Mac data recovery software that can work with an NTFS partition, though there might be something out there I've missed. Do not erase the Bootcamp partition before attempting to use any recovery software if you can possibly avoid doing so (use Windows volume repair software if the volume won't mount); that will just make the recovery far more difficult.
Good luck.

Best data recovery software for Mac Os X 10.10

I need to recover data that was deleted on a WD external HDD. I am using a mac mini with Os X 10.10.
I would like to use a reliable and safe data recovery product.
Any suggestions?

The file was fragmented. To fully recover a file it needs to be continuous on the hard drive. If the file was fragmented it was broken into pieces across the hard drive. The recovery program can't know this so would each piece as a different file as it no longer has a map to go off of.
There will probably be many files with a random letter/number combo for a name. Within these may be the missing parts of the video. While there may be some advanced forensic techniques to reconstitute the files. I think that would go beyond some forum advice to needing years of advanced training in data recovery.
You can try Nucleus Kernel Macintosh. It is by far the most thorough and robust data recovery I have used but requires Windows to run even though it recovers Mac volumes.
For OS X native try Stellar Phoenix. I didn't find it as good but it is definitely the best I know of for Os X 10.10.
I would not bother with Data Rescue or Disk Warrior. They will not do a deep scan of the hard drive. They also won't do a scan if the partition table was lost and won't try to plow through disk errors.
Also $70 to $100 for data recovery software is very cheap compared to professional.
Edit: I also hope you are recovering files to a different drive than that external you wiped and that you have not been adding any files to it. Otherwise that data will be mangled fast.

Data Recovery Software for MBP

Apparently I have trashed the directory on my FW 160GB Maxtor External drive. "Unable to read disk". (It is a drag since it happened just as I was getting my brand new MBP system up! Oh well!)
My research has not uncovered a suitable disk repair/data recovery solution for the new iMac (Intel-based). Does anybody know of one? The best one?

Other than Disk Utility (Utilities folder) there are two commercial products: TechTool Pro 4.5.2 (www.micromat.com) and Drive Genius 1.5.1 (www.prosofteng.com.)
Try DU, it's pretty good unless the directory is too badly trashed to be repaired.
For data recovery there's Data Rescue II (www.prosofteng.com) and File Salvage (www.subrosasoft.com.)
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Help needed! Usb Data recovery software for word documents?

A friend of mine has saved ALL of her precious work on a USB pen, which for no apparent reason has stopped working!
It isn't being recognised by windows, but my mac is detecting it with trial software which I cannot buy on my measly student income. Not doable.
Is there any data recovery software available for macs which detect microsoft documents which is....ummm free?
It's beginning to drive me mad I've been looking at this stupid pen for ages. But my mate has offered me 50 quid if I get it sorted, so I am persevering! Any help would be appreciated guys!

You can try the free Demo version of Data Rescue. It does not detect Word files; it's looking for anything on the device that matches the criteria you set.
Hope this helps,
Mulder
If my answer helped solve your problem, please consider awarding some points. Why Reward Points?
iMac G4 700Mhz Mac OS X (10.3.9)

I have just upgraded to Snow Leopard and have lost my epson printer software. On Epson Aus. web page there is no upgrade of their software for my printer with Snow Leopard. Can i download a lesser operating system software for printer?

I have just upgraded to snow leopard and lost my epson printer software. I have checked Epson Aus web site for printer software but they haven't upgraded it for snow leopard. Am i able to download software for a lesser operating system then snow leopard or do i have to purchase a new printer? The model is stylus photo R310.

Have you tried the R300 or R320 software? Typically the software covers a broad spectrum of printers, often providinbg overlap to cover "relatives" of a series.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 47541&prodoid=47915738&infoType=Downloads&platform=Macintosh

Data transfer software for Samsung cell phones

hi,
does anyone know where i could buy data transfer software + usb cable for a samsung a650? i have been able to find the software for windows pcs but not for mac os x.
thanks,
vince

I have found two possibilities for iSync with a Samsung A650:
Data Pilot: http://www.susteen.com/phonesupport/en_US/13/7/410
OnSync: http://www.onmadesoft.com/pgs/mobiles_samsung.html
OnSync is shareware, so you can try it out, but you'll have to find a cable first. It's not clear from their web site whether it works with the A650 specifically.
I have an A650 also, and am interested in hearing from anyone who's actually succeeded in using it with iSync.

What is the most unto date system software for the iMac?

Similar Messages

Maybe you are looking for