What is the motherboard and other hardware for the Pavillion dv2700?

I just got it from a friend who didn't know how to fix it, and I really just need to know the parts I need. Has the battery problem been resolved which was the root to this overheating?

Hello
You are right. WLAN card in your notebook is Intel (Golan) Intel 3945ABG and the driver can be downloaded from http://aps2.toshiba-tro.de/wlan/?page=downloads
As I can see there is version 12.2.0.11.3 available for download.
Download driver for Vista and with exe files extract it to some folder. Later look check this folder and go into folder Vista32Drv.
Drivers are there and install them manually with WLAN properties > install new driver.
Does this method works?
What so say about BT? The latest version is the newest and you can install it on your Satellite notebook.
What you want to do with BIOS settings exactly? some certain hardware components can be also disabled in device manager.

Similar Messages

  • HT2515 I have a Macbook Pro and an iPhone5. At one point, I received messages in sync on both devices. Now, I get some messages on the Macbook and others only on the iPhone. What happened?

    I have a Macbook Pro and an iPhone5. At one point, I received messages in sync on both devices. Now, I get some messages on the Macbook and others only on the iPhone. What happened?

    Associate your mobile number with your Apple ID, if you haven't already done so.
    Sign out of iMessage on the Mac:
    Messages ▹ Preferences ▹ Accounts ▹ Sign out
    and on the iPhone:
    Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
    Then, on the phone, tap
    Use Your Apple ID for iMessage
    Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions.
    Credit for this solution to ASC user SmittyLove and to Glenn Fleishman of tidbits.com.

  • How to get the lock and block occured for the full day

    Hi,
         How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?

    Hi,
         How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?
    Why would you like to collect information about locks and let me tell you, you cannot collect information about ALL locks which were taken and even thinking about it is pointless.
    Coming to blocking if you have heavy system with huge concurrency there is bound to be blocking which is necessary and good for RDBMS but if the blocking remains for long time then this is a issue.
    There is DMV sys.dm_tran_locks which tell you what all locks are being taken. You can see various examples mentioned in DMV online documentation and can schedule the query to run every 5
    mins and insert its record in table which you can refer at end of the day.
    This task would be made very easy if you have Monitoring tool which gives you information in your mail every time blocking occurs I have Spotlight in my environment.
    If you are looking for doc for troubleshooting blocking  below is one you can refer
    http://support.microsoft.com/kb/224453
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't work.  All software is updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

  • How do your turn off the "black and White" setting for the visually impaired?

    How do you turn off the "black and White" setting for the visually impaired?  Also known as the "tripple Click"

    Settings>General>Accessibilty>White on black--> Off

  • How to set the Mail and Fax options  for the Smartforms ???

    How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .

    >
    veera Karthik wrote:
    > How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .
    Hi
    Check this Link:
    http://help.sap.com/saphelp_nw04/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/frameset.htm
    P.S: Never say reply me soon....people answer you here voluntarily and as everyone has their own desk to manage...sp replies may late or early..depending upon the availabality of the members.
    Vishwa.

  • Question about distributing an app for free through the AppStore and taking payment for the online software separately

    We intend to sell a package of online software to Golf clubs. Part of the bundle is 25 iPhones that their members use whilst attending the club.  There is an app which is controlled and administered by the online software, each of the 25 apps need to have this app installed, and the AppStore is the best way for them to download it and be pushed updates.
    Would we be breaching Apple’s terms and conditions in any way by offering this app for free through the AppStore and taking payment for the online software separately (the iPhone app is completely unusable without the online software).
    Please could you advise?

    Probably a question best addressed either in the developers' forum or by contacting Apple directly.

  • What are some features and/or apps for the hearing impaired?

    I am wondering, do you guys have an app and/or feature for a MacBook Pro, iPad 3rd generation, and iPhone 5 for the hearing ampaired?

    Is browse here: http://www.apple.com/accessibility/

  • The safety of the G5 and other hardware

    I recently got a Pro Tools Mbox 2. I also have an external hard drive. Is it safe to put both of these items close to the tower? I would like to put my Mbox on the tower but I am not sure its safe for the G5 of the Mbox.

    Hi Tyler Routson-
    I am not exactly sure what you mean by "safe", but it is not unusual for folks to put some hardware device on top of their G5 case. I have a USB hub and an external hard drive. From a physical/heat perspective you should be fine.
    However, you may find that the Mac injects some kind of noise into the audio. It may be worse the closer the unit is to the Mac. The only way to truly find out is to try it and see. If you hear noise try a different physical location.
    Luck-
    -DaddyPaycheck

  • After downloading photoshop elements 12, the system started the install and asked again for the serial.  install process will NOT accept the serial #

    I purchased a software license for photoshop elements 12.  I started the process to download the software and provided the serial number on the download card.  Since the serial number provided was correct, the download started and completed.  Once installed the system started to install the software.  Again I had to supply the serial number.  This time the system will NOT accept the serial number.  I entered it again.  Not accepted.  I tried it again, this time with dashes.  Again the serial number is not accepted.  What do I do?

    Is there any message provided when serial number is not accepted?  If so, what does it say?

  • The up and down arrows for the Finder columns are difficult to bring into view - any way to make them easier or permanent?

    Hi -
    My husband works with multi-level folders, each with way more content than will fit on the screen.  He says that he can't get the up and down arrows to show up when he is looking for a file in Finder, or wanting to move or copy files to another folder several layers up.  They will apparently show up at times, but if he isn't fast enough, they disappear before he can get his mouse over to them.  He cannot use a Magic Mouse or a touchpad, which would solve the problem with finger gestures.  He thinks this happened when I put Lion on our computers several months ago.  My own files are not so extensive, and I can use a Magic Mouse, so I haven't noticed any problem.
    Was there a change in Lion - assuming that finger gestures would replace the up and down arrows onscreen?  Is there a workaround to get this functionality back?
    Any help would be appreciated, thanks!

    Canon cameras don't play will with other FireWire devices on the same bus. You could try disconnecting the WD drive and connecting the camera directly to the computer without and capturing to the internal drive. It should be fast enough for DV.
    One probably is that your version of FCE is not supported on the version of the OS you are running. The last version I think that works with that software is 10.4.10 or earlier.

  • We used the same id for her phone an sisters iPod now everything goes to her phone is there anyway to change it on the iPhone and keep it for the iPod

    We set up the iPhone with the same Apple ID an password is there anyway to change if on the iPhone am still keep it for the ipod

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • HT4527 So my computers switched the 'old' and 'new' computers for the homesharing option.

    Old computer is running Windows 7
    New computer is running windows 8
    Both are connected over the same cable modem.
    I followed the instructions to the letter and it kept doing it.
    HELP!!! I need my music on my laptop as I am going to be traveling alot.

    I am not familiar with "transfer manager." Did you perhaps use the Migration Assistant? What operating system is installed on your new computer?
    If you look in your hard drive, in the Users folder, do you see a folder with the name from your user on your old computer?
    Best of luck.

  • When I connect my digital camera to my iPad it will only download the stills, not the videos. How can I download the videos? I have the USB and HDMI connectors for the iPad.

    When I connect my Leica digital camera to my iPad it will only download the photos not the videos. How can I download the videos anyone please?

    If your camera has an SD memory card, use the camera connection kit & the SD card to download to the iPad. That's what I do.
    Another way that will work. Download the video(s) to your computer. Then you can use a USB flash drive & the camera connection kit.
    First, Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie file into the folder. The movie file must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie file should appear & you can import.
     Cheers, Tom

  • Hello, I would like to know if you know of somebody that has developed the SQL and Exchange conector for the iPlanet Directory Server Intergration Edition (Meta Directory)? Thabk you

     

    If you are using Exchange 5.5 or later you don't really need a custom connector. Exchange has an export/import command "admin.exe" that can be used to create a csv file of your exchange users (and other info). All you'll need then is the meta UTC (Universal Text Connector).

Maybe you are looking for

  • Print using ALV method-set_table_for_first_display

    Hi , I have developed a report with ALV output , using the method -set_table_for_first_display. But now I am asked to change it to print the output also in 8/11" sheet. Please suggest how I can do it. Thanks & Regards, Ramana

  • How do I add a third tier to a hierarchy chart in PPT 2011?

    I'm trying to make an organizational chart and cannot find out how to add additional squares to make a third level.  I can add on the first two.  I know it's possible because I've done it but cannot seem to replicate what I once did.  Please help!  I

  • IE 11 not able to add Search Provider

    This is brand new Windows 8.1 install, freshly installed O365 and all critical updates installed. So I click on the gear in IE, select Manage add-ons. This opens the Manage Add-ons window, I click on Search providers, it only shows Bing. I click on F

  • Cannot Resolve Copy

    C:\jdk11\java\bin>javac IndexOfMethodThree.java IndexOfMethodThree.java:9: cannot resolve symbol symbol : constructor BufferedReader (java.io.InputStream) location: class java.io.BufferedReader BufferedReader br = (new BufferedReader(System.in)); ^ 1

  • HT1750 Microsoft 2011 for Mac

    Is it safe to use the youtube video on how to download Microsoft Office 2011 for free on my MAC?