What is the name in the status bar when we activate a webdynpro??

hi all,
When we activate the webdynpro,in the status bar its displayin some name like 1BCWDY/*********==CP.
I got it is the include program.
The name getting displayed in status bar and the name in the table WDY_WB_SOURCEMAP differs.
If i give the component name in the table WDY_WB_SOURCEMAP it displayin all the includes but not the one displayed in status bar.
Kindly tell me why it differs.

Hi,
Check the tables WDY_WB* you can find the relevant ones in these tables.
These includes can be for the views/components....
Are you activating the view/component.
Regards,
Lekha.

Similar Messages

What are the steps to change the name on the "House" in the side bar on OSX Mavericks?

What are the steps required to change the name on the "House" in the side bar for OSX Mavericks?

You want to change your username. First, make a backup of your files with Time Machine, as any error may damage your user.
Then, follow these steps to change your username > http://support.apple.com/kb/ht1428 Be very careful, as it requires to log in as root

Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc

Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc.. Please Help!

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Open an App and see the App instead of just the name in the menu bar?

This may seem like a dumb question, but here goes anyway...
Two applications in particular....Microsoft Office apps (word,excel,etc)
and Pro Tools LE....
How do I open these apps and see the opening page of the app, rather that
just the name of the app in the menu bar and the desktop...?
This happens automatically in Win XP or Vista....

Only a very few Apps have the option/preference to do that in OSX, not sure if any MS APPs do or not.
Maybe it would be closer to what you want though, to instead of opening the APP, drag say the Word® doc you want to the Word® icon in the Dock, which runs Word, opens the document, and skips the Open Dialog.

What the name of the Adobe Flash package I can install with yum .

Hello,
What the name of the Adobe Flash package I can install with yum . I am using oracle linux 6.4 x86_64.
Thanks Glenn

Admin1001 wrote:
You will need to install the flash-plugin package.
# yum install flash-pluginThere is no such installation package:
# yum repolist
Loaded plugins: security
repo id                            repo name                                                                                  status
ol6_UEK_latest                     Latest Unbreakable Enterprise Kernel for Oracle Linux 6Server (x86_64)                        169
ol6_latest                         Oracle Linux 6Server Latest (x86_64)                                                       21,382
repolist: 21,551
# yum list flash-plugin
Loaded plugins: security
Error: No matching Packages to list

Removing the 'Warning Java Applet' Status Bar

Hi,
I've written an applet that does not require access outside the sandbox so doesn't need signing. However, it pops up an instance of Window, and because it's not signed the window has a status bar across the bottom which says 'Warning Java Applet' or something similar depending on the browser. Is there any way to remove this status bar without signing the applet or changing the security settings of the browser. I guess it must be added to the window so maybe it's just a component that can be removed, but how?
Thanks in advance

Today the Security Warning sign appeared at the bottom of my computer screen - how do I get rid of it. I do have Java whose icon used to be in the lower right hand section of my screen - along with all the other icon programs that I have.
Now the icon is no longer down on the bottom right of the screen, but in the middle with a Security Warning -(the wording) next to the jave icon.
This is really annoying me - how can I get rid of it, and - why did it appear here?
Anxiously awaiting your reply.
Donna

What is the name of the table for finding user exit !

What is the table name to find the user exit !

Hi,
Goto to the table tstc and enter the transaction code for
which u want to find out the User-Exits. Check out the
program name from the result. Goto SE38 and dee that
program in display mode. Then search for the string Call
Cutomer-Funtion. All the result of search are the user
exits defined there for that transaction.
SAP user exits (enhancement names that we see in SMOD transaction) are all stored in the table MODSAP. The field NAME contains the enhancement name and the field MEMBER contains the name of the function module that will be called if the customer enhancement exists and is active. The customer enhancement projects are stored in the table MODACT. There, the NAME field is the name of the project and MEMBER is the name of SAP enhancement (that from the MODSAP).
So, if you are in some include, you can use where-used-list to get to the function module name. Then you find the SAP enhancement name from the MODSAP by supplying the function module. And finally, you find the customer enhancement projects by querying the MODACT with the SAP enhancement in the field MEMBER.
cheers,
vasavi.
kindly reward if helpful.

I've installed LR on my new Mac - How do I find/what is the name of the file that opens to bring up my existing photos (on my external hd)?

I've installed LR on my new Mac - How do I find/what is the name of the file that opens to bring up my existing photos (on my external hd)?

Bookmarks and history are stored together in your profile folder in a database file named places.sqlite. These articles should help with restoring as much or as little of your other profile as you like:
Locating the folder: [https://support.mozilla.com/en-US/kb/Profiles Profiles | How to | Firefox Help]
The following article has suggestions for recovering bookmarks: [http://support.mozilla.com/en-US/kb/Lost%20Bookmarks Lost Bookmarks | Troubleshooting | Firefox Help].
To move more settings, see: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
Hope this helps.

What are the names of the flowers on Apple TV screen saver?

what are the names of the flowers on Apple TV screen saver?
I am looking for the the botanical names...
Would anyone know where to find the credits for the photos used on the flowers screen saver?
-carol8ne

You can stream from a Mac via itunes selection (iPhoto events or a folder) - it has 8GB of solid state temporary storage, but quite how things are cached/flushed from here is a bit of a mystery - you cannot say designate 2GB to hold photos or prioritise photos over other material.
Even rentals seem to flush if you've watched them and they haven't expired - relative fell asleep during a rental yesterday so i suggested she watched it today and it downloaded from scratch again, and the AppleTV hadn't had anything but music playing in the interim. Silly this really. There's a post on another section where someone used 17GB of their data allowance to watch a HD movie as it kept reloading!
Yes you can stream photos from iPod/iPad using Airplay, but to be honest i don't think ATV2 offers that much over ATV1 for photos (yet anyway), and in some ways it's inferior.
ATV2 is far more responsive/uses less power etc but I'm not convinced you get anything groundbeaking unless you have a lot of guests who could use it via Airplay from their iphones (and with ipads currently without cameras, photos would have to come from somewhere else in the first place).
Message was edited by: Alley_Cat

What are the names of the ports I have in my Macbook Pro to plug an external monitor into?

What are the names of the ports in my MacBook Pro that I can plug an external monitor into?

You have Thunderbolt or Mini DisplayPort. If you know which external display you want or you already have it, look at the ports it has got and get a Mini DisplayPort adapter for it. There are Mini DisplayPort adapters for DVI, VGA and HDMI.
Most external displays have DVI, VGA or HDMI. If you can use HDMI, use it, because it will provide much better quality. See > http://support.apple.com/kb/HT4241?viewlocale=en_US&locale=en_US
Mini DisplayPort adapters can be used with Thunderbolt

What are the names of the servers of "Yahoo!"?

Hi everybody!
I would like to use Mail to access my yahoo! e-mail account and they ask me to set up the incoming and outcoming servers. The problem is that I don't know for sure what I must enter in the spaces...
Could somebody who has already done the steps tell for me the name of the two servers for a Yahoo! account?
Thank you!

Yahoo does not support IMAP access to its mail servers. It offers web mail access for all accounts, & supports POP3 access for Yahoo Mail Plus accounts. Instructions for configuring the Plus version for POP access are available from Yahoo support, or by Googling that name. You must configure both your Plus account at Yahoo & your client app.

What are the names and the parameters of the SSIS reports

what are the names and the parameters of the SSIS reports
(delivered with and included in the SSMS)
to navigate from my reports to the build in reports
it's necessary to know the reportname and the parameters.
I want to "combine" respectively want to navigate
from custom reports (works excellent) to the 5 build in reports
please have a look at the attached picture and in particular
to the blue arrow.SSIS_ReportsNavigation
thank you for providing an answer or a hint.

to navigate from my reports to the build in reports
Those integrated reports in SSMS are not hosted in SSRS, so there is no URL available where you can navigate to.
The reports run in client side rendering mode = RDLC.
Olaf Helper
[ Blog] [ Xing] [ MVP]

What is the name of the song on the OVI maps comme...

What is the name of the song featured on the commercial for OVI maps, the ad looks as though it's set in Florence, Italy but I'm not sure. Really would like to know. Also, I believe it's a female singer. Thanks a bunch, please help.

bah it was a royal pain the backside to uncover which damn song this was, but like the OP I too was enchanted with the melody. Anyway without further adu, the song is Donkey by Bachelorette. The song can be heard in full here:
http://www.imeem.com/ccozie/music/DH_juR9p/bachelorette-donkey/

What is the name of the new apple docking station?

what is the name of the new apple docking station?

I believe it's a face in the Myriad Pro family. The font used in the text on the Graphics page appears to be Myriad Pro Semibold.
These fonts aren't included with OS X.
Hope this helps....

Updating the Line number on status bar.

Hi all,
I have developed an editor using swing, however I have used the JTextpane class to display the text. I had did of trouble with features such as go to line as this class does not support methods such as getLineCount in the JTextArea class. However I over came this by writing the method shown below.
The problem is that I want to show the current line number on the status bar. When do I call this method? After every '\n'?
The setLine Number method is below.
Thanks for your help
Ciara
public void setLineNumber(int num) {
int lineNum = 1;
int lastNewline = 0;
char text[] = editor.getText().toCharArray();
if (num < 1)
return;
if (num == 1) {
editor.setCaretPosition(0);
return;
int i;
for (i = 0; i < text.length; i++) {
     if (text[i] == '\n') {
     lastNewline = i;
     lineNum++;
     if (num == lineNum) {
     editor.requestFocus();
     editor.setCaretPosition(lastNewline + 1);
     return;
}

Perhaps extending a PlainDocument is better, if line
numbers are meaningful for your application.
About your method, mind that getText can be quite dear,
so it is better not to call it if you don't need it.
For a more efficient alternative, look at Document.getText(int offset, int length, Segment txt)It uses a Segment (un unguarded string) pointing directly
into the document, which you can use much like a char
array.
As to your question, I would define a CaretListener
so as to update the status bar when the caret moves.

What is the name in the status bar when we activate a webdynpro??

Similar Messages

Maybe you are looking for