What is the name of the window that command/control+shift+A launches?

command/control+shift+A? Can't seem to find that shortcut listed anywhere. What is the name of the window it launches?

That is the Camera Raw filter. You can find it under Fliters>Camera Raw Filter..
Benjamin

Similar Messages

I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?

As the title says.
I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
I don't want to restart it because im scared that something might go wrong.
operating lion

LimitLess- wrote:
Hi,
I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
Thanks
I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread.

How do I open with one click all the windows that I have been minimized? When I right click on the lower bar Firefox icon, I only see the option to close all windows.

It is used to be that I could right click on the Firefox icon on the toolbar at the bottom of the screen and I would then be given the option to open all windows. Now I only see the option to close all windows. The ability to open all windows is very useful. Have you eliminated this capability? It was a very helpful feature because I often have more than 15 windows minimized at one time. On a regular basis I like to open them all and keep only the ones that I still need. I know that it is possible to see the name of each window that is minimized by moving my cursor over the Firefox icon, but this does not provide enough information. So I have to open each window one at a time to look at it and then decide to close it or keep it - this is a frustrating, time-consuming process. Is there another way to open all the minimized windows at the same time, instead of one at a time?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
* Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
* Click the "View..." button and inspect the certificate and check who is the issuer.
You can see more Details like intermediate certificates that are used in the Details pane.

Hi. Downloads has changed; I cannot open or download attachments. I don't get the window that asked "Open" or "Save" either.

When I receive an attached document (Word or OpenOffice), I click on it. I get a Norton Antivirus window that says it's clear and I click on the yellow Download button. Then nothing happens. 1. I don't get the windows that asked Open? or Save?. 2. The documents are not in the Download folder. 3. I reset the downloads to my Documents folder - nothing appears there either. 4. I search my iMac with the file names, and no results show up.

Hi carrieinholland-
I would recommend reading this Support article on troubleshooting Opening/Download issues:
[[Managing file types]]
Hope that helps.

What are the entities that can be re-used in different servers, SI App, SI instance? And how?

Greetings,
What are the entities that can be re-used in different servers, SI App, SI instance? And how?
e.g. can I use a deployed IQStreamable@app1 into app2?
can I use a deployed observable/app1/siInstance1/Server1 into another query/app3/siInstance3/server2?
On the presentation titled "04 – Installing, Deploying and Maintaining the SQL Server 2008 R2 StreamInsight Runtime Engine" with file name SQL10R2UPD05-DECK-04.pptx on ecn.channel9.msdn.com/o9/learn/SQL2008R2TrainingKit/Presentations/SQL10R2UPD05-DECK-04/SQL10R2UPD05-DECK-04.pptx
It is mentioned one of the deployment option is "Deployment: Standalone Server"
and it mention the following:
"Use this option for the following scenarios:
- Metadata objects need to be shared between applications
- Event Types
- Adapter Types
- Query Templates
- A data source registered with the server provides an event stream for another existing application"
Could you please provide good example that explain the above statement?
Cheers, Muhammad

First, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful.

I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.

I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. The computer I transfered to had a bunch of files on it and I got full ownership of what was already there, so, how do I get to my iTunes library, I do have access as an administrator to the iTunes library (that works just fine) already there and I guess I must have had a newer version ofiTunes on my defunt eMac....

Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first.

What is the windows server 2013 license version than I need to install workflow manager 1.0

what is the windows server 2013 license version than I need to install workflow manager 1.0?
enterprise or standard? can I install it on datacenter?
please provide me with the reference.
thanks

Workflow Manager will work with either SharePoint Enterprise or Standard. It doesn't work well with Foundations since it depends on User Profiles to pass user identity to the workflow. And yes you can install it on Windows Server datacenter edition.
Here are the supported platforms for installation
http://msdn.microsoft.com/en-us/library/jj193487(v=azure.10).aspx
This article talks about integration with SharePoint and states that Foundation is not supported, but it doesn't differentiate between the Server editions, so any edition will do.
http://technet.microsoft.com/en-us/library/jj658588.aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

The window that opens when I click on the Time Machine icon is Finder (devices) and when I close this Time Machine also closes.

The window that opens when I click on the Time Machine icon is Finder (devices) and when I close this Time Machine also closes.

You will need to be much more specific about what you problem is. That is how TM works. That is how you find things to restore from TM, by using a Finder window so that you can browse through the Mac's hierarchy of folders and files.
Why are you double posting this?

What r the steps that involve while v r using DBCONNECT AND UDCONNEC

Hi All,
What r the steps that involve while v r using DBCONNECT AND UDCONNECT AND IN WHICH DIFFERENT SCENARIOS V USE THEM.
REGARDS
KK

Hi,
To Configure UD Connect on the J2EE Server for JDBC Access to External Databases;
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
To create Driver on JDBC side
http://help.sap.com/saphelp_nw70/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm
Configuring the BI Java Connectors
http://help.sap.com/saphelp_nw70/helpdata/en/43/e35b3315bb2d57e10000000a422035/frameset.htm
Then to extract data use this...
Before you can transfer data from UD Connect sources into BI, you have to generate the metadata (the information about the source object and source object elements) in BI, in the form of a DataSource with a function module for extraction.
If your dataflow is modeled with objects based on the old concept (InfoSource 3.x, transfer rules 3.x, update rules 3.x), you can generate a DataSource 3.x for transferring data into BI from a database source system.
Prerequisites
You have modeled the InfoObjects that you want to use in the InfoSource and the data target or InfoProvider according to the UD Connect source object elements.
Note the following background information:
Using InfoObjects with UD Connect
Data Types and Their Conversion
Using the SAP Namespace for Generated Objects
Procedure
You are in the Modeling InfoSource tree of the Administrator Workbench. First create in InfoSource and activate the communication structure. Then generate the generic DataSource using the wizard in the InfoSource maintenance.
1. Choose InfoSources ® Your Application Component ® Context Menu (right mouse click) ® Create InfoSource.
2. Select the type of the InfoSource.
3. Under InfoSource, enter the technical name of the InfoSource, and assign a description and choose Continue.
The system creates an InfoSource and shows it in the InfoSource tree under your application components.
4. In the context menu of the InfoSource, choose Change .
The communication structure maintenance screen appears.
5. Using the previously modeled InfoObjects, create the communication structure (see Communication Structure).
6. Save and activate your communication structure
7. In the dialog box that follows you will be asked whether you wish to activate the dependent transfer program. Choose No.
8. In the InfoSource menu, choose Extras ® Create BW DataSource with UD Connect.
You get to the dialog box where you can assign a UD Connect source object to a DataSource and then generate the DataSource with the extractor. The fields for the DataSource are already being displayed in the table on the left side of the screen. The fields have the same name as the InfoObjects that you have used in the InfoSource.
9. Select the RFC Destination for the J2EE Engine.
Make sure that the local server is running. If the local server is running and you cannot open the table for RFC destinations, start the local server again.
10. Choose the UD Connect Source in which the data that you wish to access is located.
All available sources that are connected to the J2EE Engine are provided for selection in the input help. n instances are available per adapter.
11. Select the UD Connect Source Object.
All available source objects that are available in the selected UD Connect source are provided for selection in the input help. Source objects can be multi-dimensional storage or relational objects.
The system generates the name of the DataSource in the namespace 6B.
The DataSource is then replicated in BI.
The myself system is assigned to the InfoSource as source system as well as the DataSource.
The system generates a proposal for the transfer rules.
Since the DDIC structure and the function module are located in the SAP namespace, the following entries can be requested during generation:
Developer and object key or
Developer key or
Object key and
Transport request
If you do not make the requested entries, the generated infrastructure is not usable.
14. Change or complete the transfer rules as needed. For example, if a source object element is not assigned to a unit InfoObject, you can determine a constant for the unit, such as EUR for 0LOC_CURRCY (local currency).
15. Save and activate your transfer rules.
Recognizing Manual Entries
You can enter and change the RFC Destination, UD Connect Source and UD Connect Source Object manually. In order to validate these entries and the ones that depend on them, choose Recognize Manual Entries. For example, if you change the selected RFC destination, all of the field contents (US Connect Source, UD Connect Source Object, list of the source object elements) are invalid. If you choose Recognize Manual Entries, the dependent field contents are initialized and have to be maintained again.
Result
You have created the InfoSource and DataSource for data transfer with UD Connect. In the DataSource overview for the myself system, you can display the DataSource under the application components Non-Assigned Nodes.
When modeling InfoObjects in BI, note that the InfoObjects have to correspond to the source object elements with regard to the type description and length description. For more information about data type compatibility, see Data Types and Their Conversion.
The following restrictions apply when using InfoObjects:
Alpha conversion is not supported
The use of conversion routines is not supported
Upper and lower case must be enabled
These InfoObject settings are checked when they are generated.
Based on the large number of possible UD Connect sources, the most diverse data types are possible in the output system. For this reason, a compatibility check is made at the time of generation of the UD Connect DataSource that is based on the type information supplied by the source systems. This attempts to decrease the probability of errors during the extraction process.
(Refernce:SAP Notes)
Hope this helps,
regards
CSM Reddy

What is the directory that contains the init directories ?

What is the directory that contains the init directories (rc0.d/ to
rc6.d/)?
I want to install a copy of vmware5

I think you've missed the point. Arch uses BSD-style init - /etc/rc.d. If vmware, or any other app, has an init script, it should be installed in /etc/rc.d, and if you want the app to start/stop on system boot/halt, the daemon name should be added to rc.conf DAEMONS. Creating rcX.d directories is pointless, because the Arch init process won't do anything with them.

What are the objects that support documentation?

What are the objects that support documentation?

Hi
Master data is data that remains unchanged over a long period of time. Master data contains information that is always needed in the same way. Characteristics can bear master data in BW. With master data you are dealing with attributes, texts or hierarchies.
If characteristics have attributes, texts, or hierarchies at their disposal then we speak of master data-bearing characteristics.
Few types of Master Data
1) The master data of a cost center contains the name, the person responsible, the relevant hierarchy area, and so on.
2) The master data of a supplier contains the name, address, and bank details.
3) The master data of a user in the SAP system contains his/her access authorizations to the system, the standard printer, start transaction, and so on.
Use
When you create a characteristic InfoObject, it is possible to assign attributes, texts, hierarchies, or a combination of this master data to the characteristic. If a characteristic bears master data, you can edit it in BW in master data maintenance.
Master data for a characteristic is uploaded into BW using an InfoSource with direct updating.
You can also update characteristics with master data flexibly. In this case the InfoObject becomes the data target or InfoProvider. However, you must explicitly declare the InfoObject in the InfoObject maintenance to be the InfoProvider.
See also InfoSources with Flexible Updating.
Learn more @
http://help.sap.com/saphelp_nw04/helpdata/EN/28/4c1738da41e57ee10000009b38f842/frameset.htm
Regards
AB

Bootcamp... what's the worst that can happen

Apple says that Windows XP install disk must have service pack 2? what happens if you use XP upgrade disk. Theoretically, the install would just ask me to insert earlier's windows CD to verify upgrade and continue the install. I've heard that a few people have been able to load XP on bootcamp without SP2 and then used Internet Explorer to download it.
Any thoughts.

The "process" to allow that sort of verificcation is not available until you completely install Windows. I know of someone who did, as you suggest, install SP1, and then upgraded it. However, there were multiple issues involved with that, and I think you would need to search out that thread to understand them, as I don't remember.
However, having said the "book version" - have you simply tried it? LOL! Who knows - it may work, and as your Subject states - What's the worse that can happen?
Bob

My itunes wont auto sync my iphone 4 after i connect it to itunes. But it can auto sync when i connect it to my old laptop. what's the problem that it can't auto sync and when i did a backup in my new laptop, it was corrupted the next day.

But it can auto sync when i connect it to my old laptop. what's the problem that it can't auto sync and when i did a backup in my new laptop, it was corrupted the next day and i was forced to use back a backup which i did in my old laptop 4 months ago. do i have to reinstall the itunes? will my backups be corrupted after i sync again? pls guide.
P.S/ its the latest version of the itunes whenever i did the backups.

iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?

My ipad mini was stolen and i have activated the find my phone to lock it. how can i get the serial number off my itunes or icloud profile? and what are the chances that the find my iphone app works when someome erases the device?

my ipad mini has been stolen and i have activated the find my iphone to lock. now it is only a wifi device so what are the chances that a person can get hold of it and log onto wifi without the password of my device to unlock. does that not make the app rather less useful as i have to hope that the person is apt enough to log onto the internet but not enough to erase it and start afresh. is it possible to find my device even afte someone has erased it?

"Losing your iPhone feels lousy. Thankfully, iCloud can help you get it back. But if it looks like that’s not going to happen, new Find My iPhone features in iOS 7 make it harder for anyone who’s not you to use or sell your device. Now turning off Find My iPhone or erasing your device requires your Apple ID and password. Find My iPhone can also continue to display a custom message, even after your device is erased. And your Apple ID and password are required before anyone can reactivate it."
http://www.apple.com/icloud/features/#fmip

What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

Go to
 > System Preferences > Keyboard
Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

What is the name of the window that command/control+shift+A launches?

Similar Messages

Maybe you are looking for