What is the name or process that when a page is triggered, it appears in the parent page. It is almo

sorry not on cack. but keep asking the same question and no luck getting my question sumitted. help please

Welcome, and congratulations on sucessfully making this post.
We are breathless to see what follows "It is almo
Let's assume you are NOT referring to "frames" which is not an acceptable layout method.
When you have a link on a page, the default browser behavior will be to open the target page in the same window, replacing the page with the link.
If you prefer to have the target page open in a new window, you would add target="_blank" following the link i.e.
<a href="http://www.consolidatedcarpet.com" target="_blank">

Similar Messages

HT2900 what if the parental control is eabled for administrator, how to disable the parental control?

I tried to disable the parental control for the administrator, but after reboot, the parental control is still enabled for administrator.

1st option
Try to log on on an another admin account on your Machine and change that.
2nd option
if there is no other admin you have to create a new user as an admin.
Reboot. When the screen goes black hold "command- s" to enter in Single user mode
type /sbin mount -uw /
its /sbin(space)mount(space)-uw(space)/
then enter
type rm /var/db/.AppleSetupDone
its rm(space)/var/db/.AppleSetupDone
enter
Type Reboot
enter
The system, will restart with like setting up a new machine (dont worry your user files are not deleted)
set up a new account. then after that check teh user accounts on system prefrences. remove managed and boot on to your pervious user.
After managing to make your Previous usre an admin delete the other extra user that you created
Try to enable firmware password so that you can only do that to your machine. http://support.apple.com/kb/HT1352
Turn on Filevault to protect your files. http://support.apple.com/kb/PH7033

I can not reveal how to set that when I open my Mozilla to appear on the home page, just bookmarks in pictures...

like this one:
http://www.google.hr/imgres?imgurl=http://sistemac.carnet.hr/system/files/opera.png&imgrefurl=http://sistemac.carnet.hr/node/147&usg=__Cw6wRHOdgK0llehsTsrdcz8jBLk=&h=689&w=815&sz=91&hl=hr&start=0&zoom=1&tbnid=5SfIkfvCCmDdFM:&tbnh=123&tbnw=145&prev=/images%3Fq%3Dopera%26um%3D1%26hl%3Dhr%26client%3Dfirefox-a%26sa%3DN%26rls%3Dorg.mozilla:en-US:official%26biw%3D1024%26bih%3D581%26tbs%3Disch:10%2C114&um=1&itbs=1&iact=hc&vpx=627&vpy=134&dur=1462&hovh=206&hovw=244&tx=140&ty=104&ei=718FTeKqI8vwsgaL6oHfCQ&oei=718FTeKqI8vwsgaL6oHfCQ&esq=1&page=1&ndsp=15&ved=1t:429,r:8,s:0&biw=1024&bih=581
thnx

See [[How to set the home page]]

What is the name of the page or process

what is the name or process that when a page is triggered, it appears in the parent page. It is almost clear except for content. With no nav or http navigation, but only has a close button.. or click on the page and it goes back to the origional parent page. I am working in Dreamweaver 6. Did behaviors but that was close but not what I am looking for

Lightbox : http://lokeshdhakar.com/projects/lightbox2/
Search 'Lightbox' and you'll find plenty of code and variations.

What does the Merge Data Stream processor do when there are multiple input streams to it from the same reader?

Hi,
I have a process with a reader of master data that outputs 5 records that feeds simultaneously into 3 different lookup and return processors.
Each lookup and return processor brings some data back from a detail table. There can be multiple details so I follow each lookup processor with a split records from array processor. Hence I end up with 3 'streams' of data. Stream 1 has 8 records, stream 2 has 5 records and stream 3 has 6 records.
I join all these streams to a Merge Data Streams processor.
I end up with 9 records so although the help for the Merge Data Streams processor says 'Merge Data Streams does not perform any transformation, matching, or merging of records' there is clearly some merging going on.
What is the behaviour of the merge data streams processor in this scenario?
I have added attributes and flags into each of the streams. How many records should I see and what values should the added attributes/flags have (some records show attributes/flags from all 3 streams whereas others show just those attributes/flags from one stream).
I have developed a test case simply to understand what the processor is doing but it's not obvious and furthermore it's probably unwise to develop EDQ processes where the processor behaviour is not documented and guaranteed to remain consistent. What I am trying to achieve is to bring all of a person's (the master data) various details (assignments, employers, etc.) together so we can check the data (some rules require data from multiple details).
Thanks, Nik

Cheers Mike - and for the explanation of the terms.
I think I understand now how it's supposed to work.
What I'm finding however is that when I set a flag to Y at the beginning of a path (that includes a lookup and return and then split records from array processor) that flag is showing no (i.e. an empty) value in SOME of the records shown in the subsequent MDS processor (it's fine the very last split processor before we get to the MDS but then again there are fewer records in that split processor than the MDS).
In my case there are obviously more records in the MDS processor than there were in the original reader (because the lookup and returns are configured to have unlimited maximum matches). As mentioned, the different paths return different numbers of records before being combined in the MDS. Say a reader has 5 records and path 1 returns 8 records in total including a path-specific flag (flag1, set to Y) but path 2 (that again adds its own path-specific flag (flag2, set to Y) returns just 5 records (since nothing was added from the lookups) are you saying that flag2 would show as 'Y' for all 8 records shown in the MDS?
Hopefully you would be able to see what I mean if you try to create a process like the one I've described (or I can upload a package).
Re. the purpose of the separate paths approach it is simply to allow the visualisation ('showing the working' as Neil puts it) of the different checks being carried out by the process.
This is considered one of the benefits of the tool over writing SQL queries (with outer joins, query criteria, etc.).
Also, as mentioned I was following an example that Neil put together for us to ensure that we are doing things in a 'proper' and supported way.
If we put all the lookups, etc. for all the checks into one datastream then it no longer becomes so understandable and the value of joining processors in a process over simply writing SQL becomes questionable; arguably the EDQ process in fact becomes less easy to understand than simply writing SQL.
Also, to go down this route I will need to revise the (what was previously substantially working until I revised it) processes that I have already developed.
Thanks, Nik

What means the warning when you open mail app for ...

Hi,
Anyone knows what does the text that appears in the screen when you open applications, like the mail client for the first time?
The text is the following (among other text):
"Nokia identifies your phone number, IMEI and network in order to provide you with a rich experience"
What the h... means this?
In my first contact with the phone with "Nokia PC Suite" I found that it sends to Nokia servers the IMEI and other phone data (who knows what for). Does it menas that when you use the default mail cilent, it sends data to Nokia? What it does for? Because I wouldn't like at all that the application sends any data, anywhere, if I decide to use the application.
I don't know why there is no more information in any place, even support page, even the ... sad manual (that doesn't explain anything about a lot of options)...
Thanks for any information, regards.
Solved!
Go to Solution.

Abi99 wrote:
If you need a formal statement from Nokia, you have to contact your local Nokia Care because here (in all sections) we are an end-user-to-end-user discussion board.
Again, this is a code for Switzerland. Where are you located? Your local Nokia Care might offer to change the code for you. Although they might take a service charge.
I see, thanks for all your advices.
I'm in Spain, but, as I said, it is a second hand device (actually I'm the third hand). Maybe the first owner bought somewhere in Europe, maybe to Amazon.de (very popular place to buy from Spain as it is cheaper than Amazon.es, or before even existed Amazon.es that arrived to Spain only a year back or so; or maybe it was in holidays around Europe; at least, I don't know the exact origin of the device).
Indeed one thing different is that the paper manuals comming in the box aren't in spanish, they are in german, french and italian (all surrounding Switzerland, indeed).
About the last phrase, I think I won't hassle myself in pay for a change of the product code and be able to update. That, by the way, the nearest Nokia Care is quite far from my place and if I choose doing by any kind of RMA, the ultra-expensive delivery costs in Spain, don't make me feel like doing either.
Said this, thanks for all your advices again
I'll end testing for myself if the mail application does "what it shouldn't do", and I'll decide if use it or not. Probably not, but I'll just test to see with my eyes
Thanks, regards.

Acrobat 9 Pro: Licensing issue prevents Acrobat from opening. What's the fix?

OK - or i should say not OK!!
I am running the licensed version of Acrobat 9 Pro on Mac OSX. It is installed on 2 of my MacBook Pro 17" laptops. These machines are respectively 1 month and 14 months old, and both are completely up-to-date software wise. 3 weeks ago Acrobat presented the error message "Licensing for this product has stopped working" and then quits. Searching through the error logs reveals the following: No matching processes were found. Shutting down licensing service ...
I have meticulously, several times worked through all the recommended steps on the Adobe site to address this issue but to no avail. Booting up in safe mode makes no difference. In desperation I re-installed the OS, but to no avail. My several and extended communications with Adobe online help have left me chatting with what sounded like a couple of uni students from India who had insufficient understanding of English, Macs and Acrobat. After 3 weeks my case has been closed twice by Adobe who report that they believe my issue is resolved and have therefore closed my case. Great!!! What's more, occasionally Safari is presented online with a pdf file which it attempts to load, and then crashes.
This issue has seriously affected my ability to work with and create pdf's which in my work as a medical researcher is essential. To add insult to injury, I have wasted too many precious hours attempting to rectify the situation.
The bottom line is caveat emptor (buyer beware). Adobe it seems are committed to making a sale but not to follow-up, service or genuine concern for their customers. When some company produces a less buggy (and cheaper) alternative I will be definitely be buying their wares.
In the interim, if anybody out there can advise me as to how to get Acrobat working again, I would be most grateful.
Have a great day.
David

When you reinstalled Acrobat, did you use the uninstaller? Also the uninstaller still leaves some files not removed.
If your using OSX.4.11 go to Find file and type in Acrobat, find any files (not .pdf's) that are in the Library > Application support and Preferences. Remove all traces of any of these files. Look both in Main Library, and in Library in your User Folder (has name you gave computer when you installed system).
It appears your have a corrupt file.
Many problems can be traced down to corrupt file(s) in Application Support or Preferences. Preference file will regenerate though any customizations you did will be lost.
Have you installed more than the two Copies allowed (by accident)?
Also, if you have tied to a a common Server/Network and both have computers running at same time, might have caused this. (unless you bought at site license if Adobe sells such).

In the Full Featured LabVIEW example, what makes the entry point button reappear?

My question is this: What piece of LV code or invoke node for the TS engine makes the Entry Point button reappear when a sequence file is loaded?
Background:
I've inherited a modified version of the Full Featured LabVIEW UI, which has been moderately modified (Enough so that restarting isn't really an option, but it's still similar enough to use them as comparisons for behaviors). Also, this code was started in LV2012/TS2012, and I'm migrating to LV2013/TS2013, but this behavior was consistent in both versions.
Here's what I've tried:
I found that when the Connect Command executes (See attachment), the button, which is a TSUI.IButton control, is gets greyed out or hidden. In the unmodified example UI that's provided with TestStand, the button reappears when a sequence file is loaded. The problem is that when I load a sequence file in my code, and click on it ahead of running, the button does not reappear. In my code, I can run the sequence successfully by right clicking on the sequence file and selecting Run, so I don't believe the sequence has an error, nor the process model.
Thanks in advance,
Seth
Solved!
Go to Solution.
Attachments:
ConnectCommand.JPG ‏56 KB

Seth,
The "options" input of the ConnectCommand function controls this. On the Help page for this input, you can see that there are options for "ignore enable" and "ignore visible". Either of these could impact the functionality of the entry point button. You might try making the options for both buttons 0 and see if this resolves the issue. If not, please let us know.
Daniel E.
TestStand Product Support Engineer
National Instruments

What is the PDF (book) file naming convention for iTunes?

I need to re-import my PDFs after migrating from "Windows XP to Windows 7, as the PDFs were not included in the Libary XML.
What should the PDF file names be so that when each is imported, it will reconize the Author and Title, and I won't need to manually
edit these using "Get Info". I tried <Author> - <Title>.pdf, with a space-hyphen-space betwwen Author and title, but that didn't work.
I have "keep iTunes media folder organized" checked, so Author folders are auto-created.
Thanks!

When you add a PDF to iTunes it normally sets the filename as the book name. As far as I'm aware iTunes doesn't attempt to extract any other metadata from the PDF even if it is present. If you let iTunes organize your files then after setting the author and title it will move to ...\<Media Folder>\Books\<Author>\<Title>.pdf.
tt2

What's the difference between 'On my Mac' & 'MobileMe' calendars?

I'm just moving from Entourage to iCal. I didn't import my Entourage data into iCal; I just opened the calendar created by Entourage in iCal. I assume this is fine and I can rename this calendar to something other than the default "Entourage" and keep working in it, without the need to import data?
This calendar syncs with MobileMe (where it also appears as "Entourage" ) with no problems and I can view all my events and to dos in Safari at http://www.apple.com/mobileme/.
What I'm confused about is that, when creating a new calendar in iCal I get the options: "On My Mac" and "MobileMe". I don't get it; if my calendar syncs with MobileMe, what's the difference?
Can someone please stop my brain hurting.
Thanks in advance,
Steve = : ^ )

Thanks for the reply. The To Do folder in Mail has two sub-folders: "On My Computer" and "MobileMe". All the To Dos from my regular iCal calendar already appear in the "On My Computer" sub-folder, and they end up in the calendar at MobileMe, so there's no need for a 'MobileMe'-type calendar there.
You're right that To Dos created in Mail require a 'MobileMe'-type calendar to appear in iCal, but why wouldn't you just switch to iCal to create a To Do?
Where there is a difference, though, is that it works in the other direction: To Dos created in a 'MobileMe' calendar in iCal, end up in the "MobileMe" To Do sub-folder in Mail and items in this folder get synced to the "Apple Mail To Dos" folder on the iPhone, whereas those in the "On my Computer" sub-folder don't. (I verified this).
This appears to be a solution to the lack of a To Do app on the iPhone. As far as I can see, I can: export my iCal calendar; create a new 'MobileMe' (i.e. not 'On My Computer') calendar; import my exported data into this calendar and use it in place of the current calendar. As far as I can see everything will behave exactly as it does now with the exception that my To Dos will now appear in the "MobileMe" To Dos sub-folder in Apple Mail instead of the "On My Computer" one, and this means that they will now sync to the "Apple Mail To Dos" folder on the iPhone.
But if it were this simple, there wouldn't be people all over the net complaining about the lack of a To Do list on the iPhone, and other people writing apps to fill the demand. And what is the point of the 'On My Computer'-type calendar in the first place? I must still be missing something. :-\
Steve = : ^ )

What is the name of the small part that comes lose when you are removing the two battery screws on the left side of the battery, the small part is under the top screw when removing the iPhone 4s battery?

What is the name of the small part that comes lose when you are removing the two battery screws on the left side of the battery, the small part is under the top screw when removing the iPhone 4s battery?

It's the part that means you've voided your warranty and the right to get an out-of-warranty replacement from Apple.

What is the name of the tooltips that shows up when you hover over a UIbutton?, such as "back", "foreward", "home" etc

Okey so basically I've themes my windows 7 into a black state.
The thing about that is that the default font color firefox uses for tooltips and other information is back so its quite impossible for me to read.
After a while googleing I found out that something called userChrome.css can be used so naturally I looked furhter.
I found answers for almost everything I was looking for, except these "button tooltips".
Heres my userChrome.css code:
menubar, menu {
color: black !important;
menupopup > menu,
menupopup > menuitem,
popup > menu,
popup > menuitem {
color: white !important;
tooltip, statusbar {
color: white !important;
Basically it takes care of all text that was black and turns it the way I like it.
So what is the name of the tooltips that shows up when you hover over a UIbutton? such as "back"
With the correct name I should be able to add
name {
color: white !important
and it should work just fine :)

hey 88_King,
go to http://support.lenovo.com and download any one or all the software you require from here.
and most of the items you need is under ThinkVantage
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

HT4061 What is the correct name of the tones that my callers hear when they call me, and how do I obtain tones?

What is the correct name of the tones my callers hear when they call me and how do I obtain those tones?

Hi sonyadenice,
Those are called Ringback Tones by AT&T. Other carriers may use a different name for them. If your carrier is AT&T, here is a link with FAQs about their Ringback Tones. If you carrier is not AT&T, then contact them to find out what is available.
Here is the AT&T link:
http://www.att.com/esupport/article.jsp?sid=52352&cv=820#fbid=q17lZzzSKGX
Hope this helps!
Cheers,
GB

My mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be?

my mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be? can it be a software issue with the wifi?
also i noted that it has only been doing this since quite recently, before it was fine
please help!

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

When I start mozilla firefox web browser, sometimes I see a message saying that "a Mozilla Firefox is already running, please close it or restart your program", while I don't have one running at that time. What is the problem?

When I start mozilla firefox web browser, sometimes I see a message saying that "a Mozilla Firefox is already running, please close it or restart your system". As a matter of fact, there is no firefox browser running at that time. Since I cannot do anything about it, I have to restart my computer before I can use the web browser, which bothers me dearly. What is the problem?

Plug-in and tasks started by Firefox may continue after attempting to close Firefox. The "X" in the upper right-hand corner closes the Window (same as Ctrl+Shift+W) but even if it is the last Firefox window, it does not necessarily close Firefox .
'''The only proper way to exit Firefox is to use Exit through the File menu''', not the "X" in the upper right corner of last Firefox window.
''Menus hidden: then use Alt+F then X.''
'''Firefox hangs''' | Troubleshooting | Firefox Support ''(some extensions cause a problem)''
* http://support.mozilla.com/kb/Firefox%20hangs#w_hang-at-exit
Use the '''Windows Task Manger''' to remove all running firefox.exe in the "Processes"
tab of the Windows Task Manager, then restart Firefox.
"'''Restartless Restart'''" extension for Firefox 4.0 only (2 KB download )
* https://addons.mozilla.org/firefox/addon/249342/
use to close and restart Firefox after enabling or disabling an extension, switching
to a new theme, or modifying configuration files, then you don't have to worry
about delay or have to look in the Task Manager to see if Firefox is closed yet.
Uses keyboard shortcut "'''Ctrl+Alt+R'''" or a file menu option.
'''Windows 7''' users can use '''Ctrl+Shift+Esc''' to get to the Windows Task Manager quicker than starting with Ctrl+Alt+Del.

What is the name or process that when a page is triggered, it appears in the parent page. It is almo

Similar Messages

Maybe you are looking for