What is the newest router for fios in 15/5 speed

i have a MI424WR(rev e). what is the newest one?

There are rev f and g.  G is pretty much only available to those with the 150/35 or higher packages.
F is also fairly rare.

Similar Messages

  • What is the best router for mugs connectivity

                       i am looking for best networking institute in India, for optical networking please suggest, have heard about Networkers Zone (http://networkerszone.com/) , however needs suggestion and what is the best router for mugs connectivity.

    For training on the Cisco Optical I would rrecommend Fastlane http://www.fastlane.si/ they would be able to fullfill your training requirements either in India or at another location even at the Cisco Factory in Monza, they can tailor courses to your specific requirements and also do switching and routing courses too, I have know one of the instructors for over 10 years they are very good.
    As far as recommending the best router, that all depends on the application, not what you mean by mugs connectivity, I know what mugs is in English but not sure if thats what you mean or if it is an acronym for something else   in any case if you post in the router section of Net-Pro with your specific requirements I'm sure someone woule be able to help/advise accordingly.

  • What is the newest update for iPad1.  I've been trying to access a web page that says it requires Flash Player.

    What is the newest update for iPad1.  I've been trying to access a web page that says it requires Flash Player.

    There is no version of Flash for any iDevice. The most recent iOS version is iOS 5.1.1.

  • What is the newest OS for 2nd generation ipod touch?

    I am looking at buying an iPod touch 2nd Gen just for music purposes. I am mainly going to use it with SiriusXM app. First I wanted to know what is the newest iOS for the ipod touch? Second, I wanted to know if anyone has a 2nd gen ipod touch and is using the SiriusXM app?
    Thank you,
    Matt

    Just note that if yo are getting a 3G iPod make sure that your get a 3G. A 2G and 3G look the same on the outside except for the model number on the back
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • What's the newest version for N95 8GB?

    What's the newest version for N95 8GB? Is it V20 or V12?

    ver 11.0.026 is the latest for Nokia N95 8gb

  • What is the cheapest route for replacing an iphone?

    Super glue dripped onto my iPhone running in around my home button. It works half the time, when it don't it just keeps bringing up Siri.
    I just got my phone bill lowered with the new rates so I really do not want to be making payments on a new phone. I heard it will cost $200 to get it repaired at an Apple store. Is that correct? I looked on eBay for an iphone but I might be buying more trouble. What is the most economical route.  I've been looking on AT&T site it seems like they got you coming and going. What to do?

    Taralynn7 wrote:
    If I do an out of warranty replacement at Apple, will I have to take the same iphone I brought in? 
    Not sure what you mean by this.

  • What is the best Router for Gaming?

    Alright, at the moment I have a "G" wireless router, which I bought it for pure gaming reasons, well I am thinking about upgrading 'cause I am having some lag and poor connections and I want to enhance my connection for online play.  I won't lie I am a addicted hardcore gamer, so I need a good router! ^_^
    Well I been looking at this WRT330N , which this one interests me a lot!
    http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1166859632665&...
    I know it's about $200 but I am willing to spend the money if it's worth it! If anyone can share anything about this router or a cheaper and better router please do so!

    I started shopping for a wired router to handle a claimed higher speed from my cable provider. I want something that runs at full incoming wire speed. I did not think I would care a lot about special gaming features. One of the techs at work uses the GamerLounge which is made by D-Link and he loves it for gaming. It runs a little over $100. It has a number of features to help automate the setup for gaming and to help debug gaming connection problems. I do not know if Linksys makes anything that is specifically targetted at gaming. You might want to read the various hardware reviews and decide which features you think will be important to you. Linksys has product documentation that describes the products but you will have to understand the terms used in the brochures to decide which device might be best for you. I have a Linksys for wireless support and it is rather slow compared to a wired connection because I run encrypted. If you want to run games on wireless, then published benchmark results may be the number one item on your list. Some routers may have much faster wireless performance than others. Cost will probably be a factor but more expensive does not always mean better. I have a WRT54G V5 and Tom's Hardware has a review discussing some of the serious limitations in V5. I stopped using it as a main router and went back to an old 10 Mbps wired router connected to the cable modem to get better performance. The WRT54G V5 sort of works when used as a wireless access point but Windows file and printer sharing do not work. So ... it all depends on which features are most important to you. Absolute best case is to talk with a friend who has a working setup that they like. Then you can decide if their priorities for choosing features match your priorities.

  • What is the latest current version of the Actiontec router for FiOS internet?

    Hello,
    I will be moving in a couple of months and I'm wondering if I should turn in my current router and ask for a new one when I get the service installed at my new house, vs taking my current router with me.  I've had mine for over 2 years now. The main issue I have is that the signal is sort of weak. I will be moving to a much bigger place and I'm worried the wireless won't be strong enough to reach end to end or outside.  
    Can someone confirm the latest and greatest Actiontec model # of the router that they are installing, and I can check to see if it's something newer than what I have.
    Thanks

    The Verizon routers do have a good amount of range on them. I'm using an ActionTec MI424-WR Rev. D running DD-WRT on my DSL connection, which replaced an older and slowly dying Linksys WRT54GXv1. The ActionTec seems to broadcast just as far as the Linksys does. Transfer wise when I go out that far, I don't know how nicely it works yet but I've seen no issues with it in my home. Other homes with the FiOS routers, it is generally due to the positioning of the router (Basements are terrible places, signals don't go down nicely) or due to being on a noisy channel. In some cases, an antenna replacement is all that is needed, and additionally, disabling the Auto-Scan function and setting a channel manually on the router work wonders as well.
    The Rev. G should be able to get better range by design, since it is N compliant and supports MIMO. The Rev. F and older routers do have two antennas, one internal and one external SMA antenna, so they do support Diversity as a result which helps with range and speed.
    I do agree with you however with the routers needing a better design. More RAM for future proofing, more antennas (Maybe 6 Internal, two external?) with Simultaneous dual-band Wireless N, Gigabit and better firmware design would be nice. Wouldo also be nice to see the return of Ethernet installs comes around, instead of it being for only the 150Mbps connections. It'd be less headaches in the long run and better service quality despite some additional install time and more cabling.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • I started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

    started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

    Any numbers or other details on the mesages given?
    Did you try to connect in recovery mode again? iOS: Unable to update or restore
    In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues

  • What are the ideal settings for my TC with Shaw's Cisco DPC3825 router/modem

    My old 2nd Gen Time Capsule crapped out and now I am about to set up my new 2TB TC.  My provider is Shaw Communications and they have upgraded me to their Broadband 100 Mbps service.  This came with a new modem/router combo made by Cisco and is model DPC3825.  Before I start plugging things in I'd like to know what are the ideal settings such that I gain the most of the BB100 service.  Should I be setting the Cisco modem/router to Bridge mode or the TC?  Should I have Shaw disable anything?  Any insight is greatly appreciated.

    Unless you specifically need to have the TC perform as the main router for your network, life will be a lot easier if you configure the TC to operate in Bridge Mode.
    Whether the Cisco modem/router or gateway can possibly be configured to act as a simple bridge mode modem is one thing to consider.
    Whether Shaw would support you in the event of any connection difficulties with the modem/router configured this way is another.
    Since Shaw is your provider, it might make sense to talk with them about best practice as far as configuring the DPC3825.
    Once you have that information in hand, you will then have the answer on how best to configure the TC.....which will very likely be in Bridge Mode.

  • I tried to download the newest version for iTunes and now it is saying something about Apple Mobile Device. And now my iTunes will not complete the new download because of this. What does this mean???

    I tried to download the newest version for iTunes and now it is saying something about apple mobile device. Never heard of this before and now it will not finish downloading because of this. What is it?? What do i need to do to get itunes to download onto my computer again??

    I got most of it done but now it is not letting me delete my C:\Program Files\Common Files\Apple
    It says that file is open in another program....What do i need to do to delete that?
    Do you currently have the iCloud control panel installed? If so, uninstall that. Can you do the deletion now?

  • Whats the best router for multiple Wireless-G

    I just want to know whats the best router for running multiple wireless-G with some things wired and some wireless also sharing on the network and gaming with a good internet connection whats the best router ?
    Good Speeds
    Good Range
    Multiple online sharing
    Online Gaming
    I think everything is wireless-g
    Things i have on the router
    Linksys Nas200  - wired
    Laptop  - wireless
    Desktop  - wired
    2 Xbox 360's  - 1 wired and 1 wireless
    2 Sony PSP's  - both wireless
    Soon a wireless printer or a linksys printer server
    Message Edited by Sas101 on 11-12-2007 07:30 PM

    As you posted it sems that you need good router for wireless connectivity .....
    You can go for any N router lile WRT300N.... WRT350N ..... WRT150N ....
    They will give you excellent performance for the connection you require.....

  • What is the newest version of Adobe camera raw for PSE 11?

    Wat is de nieuwste versie van Adobe Camera Raw voor PSE 11? What is the newest version of Adobe Camera Raw for PSE 11?

    Camera raw 7.4
    FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
    You should be able to use Help>Updates from within the pse 11 editor to get camera raw 7.4 if you don't already have it.
    You can use the 8.7 dng converter if your camera requires a newer version of camera raw
    windows
    Adobe - Adobe Camera Raw and DNG Converter : For Windows
    mac
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh
    If you have windows xp , vista or mac os x 10.6.8, then use the 8.3 dng converter
    how to use the dng converter
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • What's the best cover for the new iPad (3rd generation).  I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

    What's the best cover for the new iPad (3rd generation).  I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

    The best cover is the one that suites your needs. Try Google. There are dozens on the market.
    As for the Apple Smart Cover, it does work with the new iPad. There are a few reported issues with it, but that doesn't come close to representing the totality of folks with it.

  • Just yesterday I downloaded the newest update for iTunes, a few days before doing this I purchased music, but after doing the update my songs will not play. It shows a message that says this file cannot be located, what can I do to find the location?

    Just yesterday I downloaded the newest update for iTunes, a few days before doing this I purchased music, but after doing the update my songs will not play. It shows a message that says this file cannot be located, what can I do to find the location?

    The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

Maybe you are looking for

  • USB Bose Audio Doesn't Work & DVD/CD Ejects during startup 10.6.1

    Anyone having this problem on the Mac Pro 8 Core USB Bose Audio Doesn't Work, have to pull USB plug out and put it back in for audio to be recognised & DVD/CD Ejects during startup >>> 10.6.1

  • How to ignore the DTD in an XML file

    I am using XMLReader as XMLReader parser = XMLReaderFactory.createXMLReader("org.apache.xerces.parsers.SAXParser"); to parse an xml document. The XML has a <!DOCTYPE ....> in it which specifies a dtd file. If I do not have the dtd file on my local ma

  • How to create entity for the table which is not having the primary key

    Hi, Is it possible to create an entity for the table which is not having the primary key. I have to write a method in my session bean and that method must use this entity. any websites for this.

  • Mapping an object using values from multiple tables

    Is it possible to use values looked up in other tables when mapping an object? For example: I have three tables. In table 1, I have fields for 'cityCode' and 'stateCode'. Table 2 is a state table which contains a list of stateCodes and corresponding

  • SSO of EP

    Hi, I have ERP landscape of DEV, QAS and PRD. Its ECC 6.0. I have EP landscape as QAS and PRD configured SSO and datasource as beckend ERP QAS and PRD systems respectively I had an requirement of EP DEV too. I made a system copy of QAS server as EP D