What is the number that shows dialing *#06#?

So I found this site that claims that dialing *#06# shows the serial number of the phone. I tried this on my iPhone 4 and sure enough a 15-digit string came up with a green Dismiss button. I checked the iPhone's Settings > About, but it doesn't match any number listed. I'm just curious as to what this 15-digit number is, if anybody knows?

This link http://en.wikipedia.org/wiki/International_Mobile_Equipment_Identity should tell you all you need to know.
CM

Similar Messages

Itunes - on the left column - where it says movies "what is the number that appears on the right"?

In itunes on the left column, where it says movies "what is the number on the right side"? Mine has a number 1 in the white circle. What does that mean?

Number of unwatched movies.

What determines the links that show up on my .mac page?

Just learning iWeb 1.1.2. I created a site that included a welcome page, about me, three pages of photos, and a movie page. All this was using the templates Apple provided. I renamed the photo and movie pages. I expected the Welcome page for the site to be the only one to show up on my .mac homepage. Instead, under My Pages, the Welcome page is the only one that does not appear. (Isn't it supposed to be the equivalent of index.html?) If I go to one of the listed pages, I can then navigate to the Welcome page. But I think that is backward from how it is supposed to work. Also, another site I created showed up at first, then went off the list when I tried renaming the photo pages (removing colons from the names and adding underscores in place of spaces).

OOOOOK.
Duh, now I understand.
If it's any comfort my .mac page does not show all the pages either. Never really paid much attention to it. Really not sure what that's all about. Sounds like a .mac issue , but don't think I'd worry about it as long as the site works.
By the way, the site looks good.
You might think about a page that shows references your albums with links to the pages. You can elect to not have the album pages in the menu bar. Keeps the menu bar from getting too cluttered. Looks like you had that sort of idea on you "about me" page, but no links.
08 incorporates this concept.
anyway, good luck. Looks like your having fun with it.

Re "App Store" on the dock - what does the number that is ringed mean

Attached to the APP symbol in the dock is a red circile with a number shown. What does thise number mean ?

the number of updates available for your software.

Do you know what is the number that i will call for support in saudi arabia?

Pls help me...

That is the only phone number for Apple Support in Saudi Arabia. You can search for an authorized Apple service provider and contact them, though:
https://locate.apple.com/sa/en/
Regards.

What means the number at side of my computer's name?

Hi,
I wish to know what mean the number that appears at side of my computer's name [blablabla's Computer (138)]. This number increase by times after start up my computer but not sequentially, last night was 40 and today is 138.
Greetings

!http://i46.tinypic.com/2nvn6f.gif!
Check out the following thread............
http://discussions.apple.com/thread.jspa?threadID=2396328&tstart=0
!http://i50.tinypic.com/izvwo1.gif!

What is the name of the tooltips that shows up when you hover over a UIbutton?, such as "back", "foreward", "home" etc

Okey so basically I've themes my windows 7 into a black state.
The thing about that is that the default font color firefox uses for tooltips and other information is back so its quite impossible for me to read.
After a while googleing I found out that something called userChrome.css can be used so naturally I looked furhter.
I found answers for almost everything I was looking for, except these "button tooltips".
Heres my userChrome.css code:
menubar, menu {
color: black !important;
menupopup > menu,
menupopup > menuitem,
popup > menu,
popup > menuitem {
color: white !important;
tooltip, statusbar {
color: white !important;
Basically it takes care of all text that was black and turns it the way I like it.
So what is the name of the tooltips that shows up when you hover over a UIbutton? such as "back"
With the correct name I should be able to add
name {
color: white !important
and it should work just fine :)

hey 88_King,
go to http://support.lenovo.com and download any one or all the software you require from here.
and most of the items you need is under ThinkVantage
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

When I plug my phone on itunes, there's a "toolbar" at the bottom that shows me what is in my phone ie: music, picture, apps... what does "other" stand for ??

When I plug my phone on itunes, there's a "toolbar" at the bottom that shows me what is in my phone ie: music, picture, apps... what does "other" stand for ??

https://discussions.apple.com/message/20762105#20762105
and see to right "more like this "

What is the URL that Adobe Acrobat needs to contact for Activation after you enter the serial number

What is the URL that Adobe Acrobat needs to contact for Activation after you enter the serial number? We need to allow internet access to our users for it.

there are quite a few but they all are on the adobe.com domain.

Hi, i tried to update my iphone 5s and now the only that shows me in screen is to plugged in with itunes. I am opening itunes but it does not installed with it or regognized it ... what i must to do ?

hi, i tried to update my iphone 5s and now the only that shows me in screen is to plugged in with itunes. I am opening itunes but it does not installed with it or regognized it ... what i must to do ?

Read this
http://support.apple.com/kb/HT1808?viewlocale=en_US

My ipad mini was stolen and i have activated the find my phone to lock it. how can i get the serial number off my itunes or icloud profile? and what are the chances that the find my iphone app works when someome erases the device?

my ipad mini has been stolen and i have activated the find my iphone to lock. now it is only a wifi device so what are the chances that a person can get hold of it and log onto wifi without the password of my device to unlock. does that not make the app rather less useful as i have to hope that the person is apt enough to log onto the internet but not enough to erase it and start afresh. is it possible to find my device even afte someone has erased it?

"Losing your iPhone feels lousy. Thankfully, iCloud can help you get it back. But if it looks like that’s not going to happen, new Find My iPhone features in iOS 7 make it harder for anyone who’s not you to use or sell your device. Now turning off Find My iPhone or erasing your device requires your Apple ID and password. Find My iPhone can also continue to display a custom message, even after your device is erased. And your Apple ID and password are required before anyone can reactivate it."
http://www.apple.com/icloud/features/#fmip

The song that shows playing my ipod is not what is selected. Restore ipod or is it itunes?

How do I restore my ipod. The song that shows is playing is not playing. Or is that iTunes?

Hey slelli,
Thanks for the question. If I understand correctly, you want to restore the iPod. I would recommend that you read this article, it may be able to help the issue.
Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

Number that shows as my phone number reads invalid...

I pay the fee for unlimited calls in the US and also for having a line others can call. I have always thought my incoming line was one number and for ages it has been. Recently, even though the number still shows up on my end, if I call it, it rings as an invalid number. If no one can call me, what is the point???????? Not to mention what about all my business cards that have THAT number printed on it? How do I get this fixed?
Nancy Rollins

Hi, Nancy,
You will need to contact Skype Customer Service directly to enquire and resolve this! Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
As you know you intend to contact Customer Service, skip past Step 2 of the instruction where several articles from the FAQ library will appear for you to review, and proceed to Step 3, Continue Support Request (the "button" appears at the lower right corner of the website page). You may also skip past in Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Where is the button that shows me all my post?

Where is the button that show me all my post in this forum?
I do not understand why other than to make finding things that much more convoluted and difficult for the people that have actual problems;
and safer for the idiots that spout crap out on the forums?
Really how can a forum run by a company as large as adobe be so useless?
I have posted many question starting back 3 years ago; none which have an answer yet why?
I just do not understand?
Is there anyone with a clue in this forum?

Hello engine_man_2t,
if you are seriously interested to solve some of your problems, so you should have a look at this thread Re: What happened to my DW Forum acct? with the hint in consecutive number 3. >>> "The forum administrators read http://forums.adobe.com/community/general/forum_comments".
Hans-Günter

What r the steps that involve while v r using DBCONNECT AND UDCONNEC

Hi All,
What r the steps that involve while v r using DBCONNECT AND UDCONNECT AND IN WHICH DIFFERENT SCENARIOS V USE THEM.
REGARDS
KK

Hi,
To Configure UD Connect on the J2EE Server for JDBC Access to External Databases;
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
To create Driver on JDBC side
http://help.sap.com/saphelp_nw70/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm
Configuring the BI Java Connectors
http://help.sap.com/saphelp_nw70/helpdata/en/43/e35b3315bb2d57e10000000a422035/frameset.htm
Then to extract data use this...
Before you can transfer data from UD Connect sources into BI, you have to generate the metadata (the information about the source object and source object elements) in BI, in the form of a DataSource with a function module for extraction.
If your dataflow is modeled with objects based on the old concept (InfoSource 3.x, transfer rules 3.x, update rules 3.x), you can generate a DataSource 3.x for transferring data into BI from a database source system.
Prerequisites
You have modeled the InfoObjects that you want to use in the InfoSource and the data target or InfoProvider according to the UD Connect source object elements.
Note the following background information:
Using InfoObjects with UD Connect
Data Types and Their Conversion
Using the SAP Namespace for Generated Objects
Procedure
You are in the Modeling InfoSource tree of the Administrator Workbench. First create in InfoSource and activate the communication structure. Then generate the generic DataSource using the wizard in the InfoSource maintenance.
1. Choose InfoSources ® Your Application Component ® Context Menu (right mouse click) ® Create InfoSource.
2. Select the type of the InfoSource.
3. Under InfoSource, enter the technical name of the InfoSource, and assign a description and choose Continue.
The system creates an InfoSource and shows it in the InfoSource tree under your application components.
4. In the context menu of the InfoSource, choose Change .
The communication structure maintenance screen appears.
5. Using the previously modeled InfoObjects, create the communication structure (see Communication Structure).
6. Save and activate your communication structure
7. In the dialog box that follows you will be asked whether you wish to activate the dependent transfer program. Choose No.
8. In the InfoSource menu, choose Extras ® Create BW DataSource with UD Connect.
You get to the dialog box where you can assign a UD Connect source object to a DataSource and then generate the DataSource with the extractor. The fields for the DataSource are already being displayed in the table on the left side of the screen. The fields have the same name as the InfoObjects that you have used in the InfoSource.
9. Select the RFC Destination for the J2EE Engine.
Make sure that the local server is running. If the local server is running and you cannot open the table for RFC destinations, start the local server again.
10. Choose the UD Connect Source in which the data that you wish to access is located.
All available sources that are connected to the J2EE Engine are provided for selection in the input help. n instances are available per adapter.
11. Select the UD Connect Source Object.
All available source objects that are available in the selected UD Connect source are provided for selection in the input help. Source objects can be multi-dimensional storage or relational objects.
The system generates the name of the DataSource in the namespace 6B.
The DataSource is then replicated in BI.
The myself system is assigned to the InfoSource as source system as well as the DataSource.
The system generates a proposal for the transfer rules.
Since the DDIC structure and the function module are located in the SAP namespace, the following entries can be requested during generation:
Developer and object key or
Developer key or
Object key and
Transport request
If you do not make the requested entries, the generated infrastructure is not usable.
14. Change or complete the transfer rules as needed. For example, if a source object element is not assigned to a unit InfoObject, you can determine a constant for the unit, such as EUR for 0LOC_CURRCY (local currency).
15. Save and activate your transfer rules.
Recognizing Manual Entries
You can enter and change the RFC Destination, UD Connect Source and UD Connect Source Object manually. In order to validate these entries and the ones that depend on them, choose Recognize Manual Entries. For example, if you change the selected RFC destination, all of the field contents (US Connect Source, UD Connect Source Object, list of the source object elements) are invalid. If you choose Recognize Manual Entries, the dependent field contents are initialized and have to be maintained again.
Result
You have created the InfoSource and DataSource for data transfer with UD Connect. In the DataSource overview for the myself system, you can display the DataSource under the application components Non-Assigned Nodes.
When modeling InfoObjects in BI, note that the InfoObjects have to correspond to the source object elements with regard to the type description and length description. For more information about data type compatibility, see Data Types and Their Conversion.
The following restrictions apply when using InfoObjects:
Alpha conversion is not supported
The use of conversion routines is not supported
Upper and lower case must be enabled
These InfoObject settings are checked when they are generated.
Based on the large number of possible UD Connect sources, the most diverse data types are possible in the output system. For this reason, a compatibility check is made at the time of generation of the UD Connect DataSource that is based on the type information supplied by the source systems. This attempts to decrease the probability of errors during the extraction process.
(Refernce:SAP Notes)
Hope this helps,
regards
CSM Reddy

What is the number that shows dialing *#06#?

Similar Messages

Maybe you are looking for