What is the order for upgrading exchange server 2013 SP1 servers to CU7?

Hi All
I am planning to upgrade my exchange server 2013 SP1CU4 to CU7 . As per my understanding , we always proceed with the CAS servers and then the Mailbox Servers during up-gradation.
But I am confused now , since I have seen articles stating , that the Mailbox servers has to be upgraded first and then the CAS servers in exchange 2013.
What will be the correct order . My environment consists of 2 Mailbox servers in DAG and 2 CAS servers (Exchange server 2013 SP1)
Thanks in Advance .
Joyso Senior Messaging Admin

Hi Joyso,
The Microsoft recommendation regarding the order in which the Exchange 2013 server roles should be installed or Upgraded is Mailbox and then CAS.
It makes sense as the CAS Role is a stateless server and all major components are held by the Mailbox Role.
Until a 2013 mailbox server comes online, the CAS server is pretty much useless. Hence, the recommended installation order in 2013 is the reverse of 2010 – Mailbox role first & then CAS
Note: If your DAG have more nodes, you need first upgrade all non-PAM nodes and then upgrade PAM node.
Some References:
The recommendation from the Product Group is to install Exchange 2013 Preview Mailbox Role first, and then the
CAS role.
If you're separating your server roles, we recommend installing the Mailbox server role first.
Upgrade your Exchange 2013 server roles in the required order. First, upgrade Mailbox servers
and then upgrade Client Access servers. -Upgrade DAG Mailbox servers
Exchange 2013 Server Roles Installation Order – Mailbox First:
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Similar Messages

Upgrade Exchange Server 2013 SP1

Hello,
I have two Exchange 2013 SP1 servers with DAG configured. I want to upgrade them with CU8. Kindly advise how to do or is there any step by step document available for upgrading the DAG member server.
Thanks in advance.

yes you need to upgrade one at a time and putting them in maintenance mode
this article has step by step info
http://vanhybrid.com/2013/11/28/script-putting-exchange-server-2013-into-maintenance-mode/
Where Technology Meets Talent

What is the impact on an Exchange server when moving FSMO role and schema master into another DC?

What is the impact on an Exchange server when moving FSMO role and schema master into another DC? What do we have to do on exchange after performing a such task?
I had 1 DC (Windows server 2008 R2), 1 Exchange 2010 SP3. I install a new DC (Windows server 2008 R2). I then move all the FSMO role including the schema master role into the NEW DC. I check to be sure that the new DC is a GC as well.
I shutdown the old DC and my Exchange server was not working properly and specially Exchange Management Shell. It start working again after I turn up the older DC.
I am wondering why Exchange did not recognize the new DC, even after moving all the roles on it.
I am looking to hearing from you guys.
Thanks a lot

if you only have 1 DC, you might need to cycle the AD Topology service after shutting the one down.
Also, take a look in the windows logs, there should be an event where Exchange goes to discover Domain Controllers, make sure both are listed there. You can probably force that by cycling AD topology (this will take all services down so be careful
when you do it)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

What is the sequence for upgrading from 10.4.11 to lion

What is the sequence for upgrading from 10.4.11 to lion. Can't use many apps without it. HELP

Quicken is an example that the OP noted is important to her, too!
Intuit makes it very difficult to find this link?!
Everytime I want to find it to post it for someone else, I have to Google: "cnet quicken 2007 for lion" and then in top listed link: Topper Kessler's review for CNET, I find the direct link to Intuit
This program will work with Quicken 2005, 2006 and 2007 data files directly. If you have a data file from an older version, such as I did, Quicken Deluxe 2002, you must use the PPC version of either Quicken 2006 or 2007 to update the data first; and then the data will work in Quicken 2007 for Lion.
For other PPC programs that require Rosetta, I installed Snow Leopard (with Rosetta) into Parallels 7 in Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

How to upgrade Exchange Server 2013 CU5 on my site?

My site have four Exchange servers . The four Exchange Servers are installed mailbox and cas roles. The
Dag achieved by the four servers. Please help me to upgrade exchange server 2013 cu5 on the four servers. how to do? Thanks.
北京老马

Hi Martin
Find the below information.
Upgrade Sequence for each Role:
==========================
You should upgrade your Exchange 2013 server roles in the following order:
Client Access
Mailbox
Edge
For DAG members
Upgrade only passive servers in the first phase.
Before you apply the service pack to a DAG member, move all active mailbox database copies off the server to be upgraded and configure the server to be blocked from activation.
Place server in DAG maintenance mode before applying the service pack to any DAG member,
Stop any scheduled tasks or other processes running on the DAG member or within that DAG that could adversely affect the DAG member being upgraded or the upgrade process
Good Luck !!
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Upgrade Exchange server 2013 to CU7 error

Dear Microsoft Team
I have Exchange server 2013 SP1 and upgrade it to CU5 it is working normal
But wen I try to Upgrade it to CU7 I got this error massage
Error:
The following error was generated when "$error.Clear();
          $maxWait = New-TimeSpan -Minutes 8
          $timeout = Get-Date;
          $timeout = $timeout.Add($maxWait);
          $currTime = Get-Date;
          $successfullySetConfigDC = $false;
          while($currTime -le $timeout)
            $setSharedCDCErrors = @();
            try
              Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
              $successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
              if($successfullySetConfigDC)
                break;
              Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
            catch
              Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
            Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
            Start-Sleep -Seconds 30;
            $currTime = Get-Date;
          if( -not $successfullySetConfigDC)
            Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
        " was run: "System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Best Regards
Rawa Zangana

Hi Rawa Zangana,
According to the error message, it seems that the Global Catalog not reachable from DC.
Please perform following steps.
1. Port 3268 listened on DC.
2. Enable Global Catalog role on all DCs.
3. Restart Exchange Server 2013 CU5.
4. Check whether Event 2080 found on all DCs, Event 2080 means that AD connectivity works fine.
5. Repeat CU7 installation.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Messaging tracking logs filename format changed in Exchange Server 2013 sp1

Hi,
I have noticed that the file name format is changed for exchange server 2013 sp1.
Now it will have hh attached to it like
MSGTRKMSyyyymmddhh-n.log;
MSGTRKMDyyyymmddhh-n.log:
MSGTRKyyyymmddhh-n.log.
So the "hh" will goes from 00 to 23 for single day.
So Lets say at 24 april 2014 first fill is created @7.30 AM, so the first file name will be
MSGTRK2014042400-1.log. Now exchange server will create new file every hour by incrementing hh part of file name. Now the last file i.e
MSGTRK2014042423-1.log will be created on 25 April 2014 at 6.30 AM.
I am not able to understand why exchange server is creating the file with old date on next day ( with 24 April on file name time stamp on 25 April).
And also how it will be decided to create the first file @ 7.30 AM.
Can anyone explain to me about this ? Why it is happening like this?
Thanks
Sandeep Gupta

Hi Sandeep,
This could related to the time difference. What’s the time zone of your server? In my lab, many files in the last day were created in the next day. For example, files in 20140410
were created on 20140411.
Also, as you mentioned, the file name format is as:
MSGTRKMSyyyymmddhh-n.log;
MSGTRKMDyyyymmddhh-n.log:
MSGTRKyyyymmddhh-n.log.
However as I know, the format is like
MSGTRKyyyymmdd-m.log, it will not have “hh”(you mean hours) in the behind and the file is not created every hour but create a new file when the old is full. So please capture some screenshots of the message tracking files
and the date/time information of the file to verify.
Title: Message Tracking
Link:
http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx
Regards, Eric Zou

Strange Exchange name when connecting with Outlook 2013 to Exchange server 2013 SP1

I've setup a test environment with Windows Server standard 2012 R2 and Exchange Server 2013 SP1...
In- and outbound SMTP works fine, as well as connecting with OWA and Mac Outlook client...
Oddly though when setting up an Outlook 2013 connection....it recognizes the email address correctly, but later on can't connect and shows a dialog to enter the server and email account manually....though the profiled fields show something like:
Exchange Server: [email protected]
Mailbox: =SMTP:[email protected]
When I fill in the right fields....it won't connect and falls back to the values above...
Something wrong in the Exchange setup?

Hmm...found aguide here:
http://enterpriseit.co/microsoft-exchange/2013/ssl-certificate-request/
Though it doesn't mention anything that with the self-signed certs it won't allow Outlook 2013 to connect...
So from my point of view Outlook 2013 should be able to connect anyway...as during the connect process you can install the self-signed cert.....so must be something else then...

Exchange Server 2013 SP1 - Internal Email Flow slowness

Hi Fellows,
I have a brand new implementation of Exchange Server 2013 SP1 with three mailbox servers and 3 CAS servers.
I am facing a considerable slow transportation of email internally. although there are just 3 mailboxes on the infrastructure at the moment.
When a user sends email to himself or other two accounts, delivery takes from 15 seconds to 35 seconds to be delivered.
Experience is same even if the email is sent from OWA, ActiveSync or Outlook.
Header analysis shows the message exchange between mailbox servers is taking time. any clue?
Decreasing Tarpit interval on Mailbox server receive connectors will be helpful?
Network communication, Storage performance, Server performance are all as good as we love to.
Thanks.
J.A

Hello,
When a user send message to a internal user in a AD site, the connector will not be used. I recommend you use message tracking to check the issue occur on server side or transport process. Please use queue viewer to check if there is mail traffic.
Cara Chen
TechNet Community Support

Installing the connector for microsoft exchange server 2010

Hi All,
We have installed AD connector 9.1.1.7.0 with OIM 11.1.1.5.0.
Now Team is upgrading to Microsoft 2010 exchange server. As of now there is no direct provisioning for microsoft exchange server.
Now we are trying to install connector for microsoft exchange and do the provisioning.
So, what is the connector version should i use Microsoft 2010 exchange.
can i install 11.1.1.5.0.Any help would be appreciated.
Also please provide the minimum details which are required to connect to target exchange server or please suggest us some doc.
Thanks in Advance.

Hi Rajiv,
Thanks for the reply. Can you please tell which version of connector i have to download?
Thanks In Advance

I need expert advice for upgrading exchange server SP1.

Hi
I having 2 mailbox and 2 cas exchange server 2013 CU2. Now i wish to upgrade all servers with SP1. SO my query is that which servers should be upgraded first.
Please let me know if need more clarification.
I having 2 mailbox and 2 cas in exhchage server 2013 CU2. now I wish to upgrade SP1 on both of servers
I having 2 mailbox and 2 cas in exhchage server 2013 CU2. now I wish to upgrade SP1 on both of servers
I having 2 mailbox and 2 cas in exhchage server 2013 CU2. now I wish to upgrade SP1 on both of servers
Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

Hi Khan
The first servers to be updated in a site are the Mailbox servers even if they are member of DAG.Ensure the DAG node you are updating is in maintainence mode. The Client Access servers are updated second. If you have multi-role servers installed then
both roles are updated at the same time anyway, and you should simply start with the internet-facing servers.
First, you will need to remove any UM language packs that you have installed in previous version. From an elevated cmd prompt navigate to the folder where you have extracted the Exchange 2013 SP1 files and run setup with the /RemoveUMLanguagePack switch. For
example, to remove the “en-us” language pack.
Refer below
http://exchangeserverpro.com/exchange-2013-installing-cumulative-updates/
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

Best practice on mailbox database size & we need how many server for deployment exchange server 2013

Dear all,
We have an server that runs Microsoft exchange server 2007 with the following specification:
4 servers: Hub&CAS1 & Hub&CAS2 & Mailbox1 & Mailbox2
Operating System : Microsoft Windows Server 2003 R2 Enterprise x64
6 mailbox databases
1500 Mailboxes
We need to upgrade our exchange server from 2007 to 2013 to fulfill the following requirment:
I want to upgrade the exchange server 2007 to exchange server 2013 and implement the following details:
1500 mailboxes
10GB or 15GB mailbox quota for each user
How many
servers and databases are
required for this migration<ins cite="mailto:Mohammad%20Ashouri" datetime="2014-05-18T22:41"></ins>?
Number of the servers:
Number of the databases:
Size of each database:
Many thanks.

You will also need to check server role requirement in exchange 2013. Please go through this link to calculate the server role requirement : http://blogs.technet.com/b/exchange/archive/2013/05/14/released-exchange-2013-server-role-requirements-calculator.aspx
2TB is recommended maximum database size for Exchange 2013 databases.
Here is the complete checklist to upgrade from exchange 2007 to 2013 : http://technet.microsoft.com/en-us/library/ff805032%28v=exchg.150%29.aspx
Meanwhile, to reduce the risks and time consumed during the completion of migration process, you can have a look at this proficient application(http://www.exchangemigrationtool.com/) that would also be
a good approach for 1500 users. It will help you to ensure the data security during the migration between exchange 2007 and 2013.

Mail flow completely broken after upgrading Exchange Server 2013 CU3 (Build 775.38) to Exchange Server 2013 SP1 (Build 847.32)

internal mail flow completely broken.
external mail flow completely broken.
i upgraded exchange server as follows:
1. setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
2. setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
3. upgraded the exchange server with GUI installer
also considered this: http://support.microsoft.com/kb/2938053/en-us
receive connectors :
Transport Service couldn't start, then i disabled hub transports, and it starts, but no mail flow on port 25. according to this:
http://social.technet.microsoft.com/wiki/contents/articles/24056.what-the-crash.aspx
i didn't have any success to fix mail flow, any solution?

Hi Alireza
The above tech-net http://social.technet.microsoft.com/wiki/contents/articles/24056.what-the-crash.aspx
will be applicable only if we get these events in the app log 1019,1018,1036,4999
You can check the transport service is running in which service account - Local or network
It should be running in network account by default.
You can run get-transportagent and check if there are any transport agents installed
If you find them then disable all the transport agents that you have installed on the Exchange servers by running disable-transportagents
Disable the antivirus if you have any installed.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Exchange Server 2013 SP1 Standard: Installation failing can't progress

I'm trying to install Exchange Server 2013 and I keep getting this error and I am unable to progress, I can't find any support on the issue and frankly I don't want to/can't afford to spend $500 to ask Microsoft for technical support (what kind of racket
do they think they're running?).
The error message:
Error:
The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.".
Yet, I see no PushNotifications virtual directory or anything remotely related to that on IIS or in the inetpub folders and files. If I try to resume the set-up after this error I get:
Error:
The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The AD configuration for virtual directory 'PushNotifications' already exists in 'CN=PushNotifications (Exchange Back End),CN=HTTP,CN=Protocols,CN=SVR02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=OFFICE,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=OFFICE,DC=local', please remove this AD configuration manually.
Parameter name: VirtualDirectoryName".
And I have to remove this config using ADSI Edit, which just returns me to the first error.

1. Prodution
2. Just 1 DC for 1 site.
3. Setup.EXE
4. Matches SP1 version numbers
5. That's just what was made available to me via MSPP, the installer doesn't see any updates?
6. Here is the log files:
[03/23/2015 22:06:52.0940] [1] Setup failed previously while performing the action Install. Looking for the failed task with ID ClientAccessComponent___75f8c93d15314369983d33ec0742e189.
[03/23/2015 22:06:52.0941] [1] 131 tasks were found to run.
[03/23/2015 22:06:52.0941] [1] Processing component 'Client Access Configuration' (Configuring Mailbox role: Client Access service.).
[03/23/2015 22:06:52.0941] [1] Executing:
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
[03/23/2015 22:06:52.0955] [2] Active Directory session settings for 'New-PushNotificationsVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'SVR01.OFFICE.local', Preferred Global Catalog: 'SVR01.OFFICE.local', Preferred Domain Controllers: '{ SVR01.OFFICE.local }'
[03/23/2015 22:06:52.0956] [2] User specified parameters: -Role:'Mailbox' -DomainController:'SVR01.OFFICE.local'
[03/23/2015 22:06:52.0956] [2] Beginning processing New-PushNotificationsVirtualDirectory
[03/23/2015 22:06:52.0999] [2] Searching objects "SVR02.OFFICE.local" of type "Server" under the root "$null".
[03/23/2015 22:06:53.0066] [2] Previous operation run on domain controller 'SVR01.OFFICE.local'.
[03/23/2015 22:06:53.0068] [2] Processing object "SVR02\PushNotifications".
[03/23/2015 22:06:56.0763] [2] The properties changed on the object '' (CN=PushNotifications (Exchange Back End),CN=HTTP,CN=Protocols,CN=SVR02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=OFFICE,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=OFFICE,DC=local) are: "{ MetabasePath[msExchMetabasePath]='IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications', AuthenticationMethodFlags[msExchInternalAuthenticationMethods]='Ntlm, WindowsIntegrated', AuthenticationMethodFlags[msExchExternalAuthenticationMethods]='Ntlm, WindowsIntegrated', Id[distinguishedName]='SVR02\PushNotifications (Exchange Back End)', InternalAuthenticationMethods[msExchInternalAuthenticationMethods]={ 'Ntlm', 'WindowsIntegrated' }, ExternalAuthenticationMethods[msExchExternalAuthenticationMethods]={ 'Ntlm', 'WindowsIntegrated' }, OrganizationId[msExchOURoot, msExchCU]='' }".
[03/23/2015 22:06:56.0764] [2] Saving object "SVR02\PushNotifications (Exchange Back End)" of type "ADPushNotificationsVirtualDirectory" and state "New".
[03/23/2015 22:06:57.0073] [2] Previous operation run on domain controller 'SVR01.OFFICE.local'.
[03/23/2015 22:06:57.0587] [2] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:57.0591] [2] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0378] [2] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0378] [2] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0386] [2] Ending processing New-PushNotificationsVirtualDirectory
[03/23/2015 22:06:58.0388] [1] The following 1 error(s) occurred during task execution:
[03/23/2015 22:06:58.0388] [1] 0. ErrorRecord: The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0389] [1] 0. ErrorRecord: System.InvalidOperationException: The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it. ---> System.Runtime.InteropServices.COMException: Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
at Microsoft.Web.Administration.Interop.IAppHostAdminManager.GetAdminSection(String bstrSectionName, String bstrPath)
at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetAuthModule(Boolean EnableModule, Boolean isChildVDirApplication, String moduleName, String moduleType, ExchangeVirtualDirectory advdir)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetLiveIdBasicAuthModule(Boolean EnableModule, Boolean isChildVDirApplication, ADExchangeServiceVirtualDirectory advdir)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServiceVirtualDirectory`1.InternalProcessComplete()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewPushNotificationsVirtualDirectory.InternalProcessComplete()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[03/23/2015 22:06:58.0389] [1] [ERROR] The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.".
[03/23/2015 22:06:58.0389] [1] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0389] [1] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0390] [1] [ERROR-REFERENCE] Id=ClientAccessComponent___75f8c93d15314369983d33ec0742e189 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[03/23/2015 22:06:58.0390] [1] Setup is stopping now because of one or more critical errors.
[03/23/2015 22:06:58.0390] [1] Finished executing component tasks.
[03/23/2015 22:06:58.0406] [1] Ending processing Install-ClientAccessRole
It says it can not log on with the supplied details, but the account is an Administrator account with full privileges so I can't see why this would be the case.

Exchange Server 2013 SP1 - Readiness Check Failing - Detected Non-existent Exchange 2007 Servers

For development purposes, I needed to install Exchange Server 2013 in our environment. Our current environment includes a couple Domain Controllers, a Sharepoint Server, and a SQL Server. So, it's got a very simple topology. The one thing
our environment does NOT have are current Exchange servers.
During the "Prerequisite Analysis" phase of the install it complained that two servers, that I can find nowhere in our active directory domain, are running Exchange 2007. Obviously, this presents some unique problems. Perhaps as a test
many years ago, someone installed Exchange 2007 to "play" with, but we've never run Exchange for any length of time.
So, this is quite the conundrum, given the above does anyone have any suggestions as to a potential solution? Ideally, I'd like to be able to "lift the covers" and cleanup the references to the non-existent servers somehow, but ANY suggestions
for fixes are MUCH appreciated.
Cheers,
Nate

Here is the thing I would do (Only if I am not going to have any exchange 2007 ever in the environment).
On any of windows server 2008 download
Exchange 2010 SP3
Extract the file and run the below command:
Setup.com /ps
This will make Exchange 2013 install. Also Deleting Exchange Administrator Group wouldn't help as Setup will look for the information about schema into AD.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

What is the order for upgrading exchange server 2013 SP1 servers to CU7?

Similar Messages

Maybe you are looking for