What is the order of starting the services?

Hi,
I have 2 node RAC with ASM. what is the order of starting the services like crs, asm,nodeapps, db, ,listener?
can you help me?
Thanks

The basic steps are asm, crs, db, listener, nodeappsTypo there? First CRS then ASM.
Also, if you are running ocfs2, then the very 1st step would be ocfs2 (if your voting and OCR disks are on a ocfs2 volume, it needs to mount before CRS can start).

Similar Messages

  • What is the order to start serveces in HFM report server (Urgent)

    Hi All,
    Please suggest me that, what is the correct order to start and stop Services in HFM Report Server.
    amont this:
    1.Hyperion Report Communication Server.
    2.Hyperion Report Print Server.
    3.Hyperion Reports Report Server.
    4.Hyperion Reports Scheduler Server.
    5.Hyperion Reports Web Application Server.
    Thanks in Advance.

    Dear you have yourself specified the correct order of starting the services
    Varun

  • I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?

    I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?
    Also, can I use music as backround to some of the slides, not to all of them as I'd like to play videos on the others?

    I have reinstalled the drivers. I watched it install the realtec and cirrus drivers. Hovering the mouse over the speaker icon says 'speakers: HP'. They are actually 'Creative'. 'Properties' indicates 'IDT High Definition CODEC' and 'This device is working correctly'.
    Driver details gives 'c:\Windows\system32\drivers\dmk.sys'.
    There is still no sound, although the little level meter on the control shows a green bar rising and falling.
    Obviously, it thinks it's working, but there's no connection to the speakers. They're not muted, either. I checked that too.
    Any other ideas?
    Thanks.

  • In order to start cable service for this device, please contact your cable provider

    when i try to watch a program on the xfinity part of tivo i get this message.In order to start cable service for this device, please contact your cable provider . what is wrong.

    stormey wrote:
    when i try to watch a program on the xfinity part of tivo i get this message.
    In order to start cable service for this device, please contact your cable provider . what is wrong.
    Apologies for the issue that you described above. I have escalated your issue to the right teams so that we can get On Demand working for you on your TiVo. That team will review your account and contact you directly. Thanks again for your patience.

  • How to stop the dispatcher from starting the server?

    Hi all,
      I am trying to disable the dispatcher from starting the server automatically, Both in the service or daemon, and in the go.bat files.
    Thanks
    Jeremy

    Right now, I start the state from the go.bat script.
    Then I start the dispatcher from the go.bat script
    what happens next, (the default setting after intsallation) is that the dispatcher calls the server in cmdline mode.
    I would like to be able to start the 3 independently for troubleshooting.
    Even when I try to use windows services to start them, I can only start the "state" and "dispatcher" service.  Some how the dispatcher is calling the server, regardless of how I start the dispatcher.
    Thanks
    Jeremy

  • Change the order in which the processes come up on restart

    Is there a way to change the order in which the processes come up again when restarting the OC4J?

    Hi --
    Do you mean the order of the applications deployed to an OC4J instance, or the processes started by OPMN when OracleAS is started.
    For the former, we put the application entries into a ordered map based on the order they are seen as in the server.xml file. While we don't offer a feature that the applications will definitively be started in that order, we do work our way through the ordered list. So for more parts you'll see the application starting the same order as they are seen in server.xml.
    For the latter, I'm not sure. I also tend to think that its again based on the order within OPMN. What you can try and use is the opmnctl startall sequential=true command, which will sequentially start each process, where it waits for the previous process to start before starting the next one. That will at least show you the order the processes are starting in and help you test the opmn ordering hypothesis.
    cheers
    -steve-

  • I recently subscribed to Acrobat XI after the trial expired but when I went to activate it I was asked for the serial number. I only have the order number on the invoice. How do I get the serial number for the trial software that is on my computer?

    I recently subscribed to Acrobat XI after the trial expired but when I went to activate it I was asked for the serial number. I only have the order number on the invoice. How do I get the serial number for the trial software that is on my computer?

    Please do not try to send attachments in mail responses to forum messages. Please return to the forum and click Reply. You can then use the CAMERA icon to add your pictures. Looking forward to seeing what is wrong with your license screens - the general advice is simply to sign in, and everything is done. Make sure you use the SAME Adobe ID that you used to purchase, and check your account details to be sure the subscription is active.

  • You don't have the authorization to start the workflow

    hi,
    We are working on integration of ESS with EP.
    From EP when we sent leave request, We are geting an error
    "You don't have the authorization to start the workflow".
      Can anyone help us on this?
    Thank you very much in advance.
    regards,
    Uttam.

    Hi Linc,
    Thanks for replying so quickly.
    I actually figured out what was wrong and I feel so foolish not for looking here first. But the folders themselves were not locked, it was each individual song that was. So all I did was open up the folder and the following sub-folders to reveal the songs. I then would right click on each song > get info > and then the locked button at the top would be highlighted in blue. All I had to do was click the button, and poof the song was unlocked and subsequently the entire folder was unlocked, then I could delete the whole thing. I had to do this about 150 times for each song hahaha but it all worked out.
    Thanks again for your time

  • I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

    I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

    In landscape mode, the mailbox list is automatically displayed (in portrait mode, you will need to tap the button to,show it).
    To edit the list, tap edit as shown below.

  • How can I hide or make visible the fields at the order and at the delivery?

    How can I hide or make visible the fields at the order and at the delivery?
    Thanks in advance.

    Hi,
    For sales order, use user exit :
    MV45AFZZ and FORM userexit_field_modification.
    For deliveries, use BADI :
    LE_SHP_DELIVERY_PROC (see with Tcode SE18) and method CHANGE_FIELD_ATTRIBUTES.
    Create implementation in ref to this badi with Tcode SE19.
    Regards,
    Lionel

  • I have a Panasonic camcorder PV-GS65 and I used to be able to connect to my iMac and my machine would automatically recognize the camera, rewind the tape, and start the import process as soon as I turned the device on and it was connected.  not anymore

    I have a Panasonic camcorder PV-GS65 and I used to be able to connect to my iMac and my machine would automatically recognize the camera, rewind the tape, and start the import process as soon as I turned the device on and it was connected.  Now my iMac does not even see my device
    Any suggestions?

    You cannot install the apps on the car.
    The cars head unit is merely acting as an interface to the apps on the device.
    If you want to use those apps in the car, plug the device in and leave it plugged in.

  • Where can I get the orders related to the sales area

    Hi,
    Could anybody tell me the Orders related to the Sales Area in CRM.
    Thanks,
    bsv.

    HI,
    YOu can use table CRMD_ORDERADM_H, CRMD_LINK and CRMD_ORGMAN.
    Get order GUID from CRMD_ORDERADM_H
    find record in CRMD_LINK with
    GUID_HI = Order GUID from CRMD_ORDEARDM_H
    OBJTYPE_HI = '05'
    OBJTYPE_SET = '21'
    You will get one and ony one record. now take GUID_SET from this record and goto table CRMD_ORGMAN
    Use this GUID_SET in CRMD_ORGMAN to get your sales area..
    This must solve your problem.
    Kindly reward with points in case helpful
    Sharif.

  • When I sync music to iPod how ca I get it to sync in the order I want the playlist verse the radom rder it keeps putting it in?

    When syncing music why will it not sync in the order I want the playlist instead of this random way it puts it on the ipod?

    this worked for me on my iphone and ipad
    make sure that all your software is up to date
    turn phone on airplane mode
    uncheck all music
    sync
    this will erase all music on your phone
    recheck music you want from your libary
    apply

  • If free upgrade is available to those who purchase after 6 June 11, Purchase should mean the order date or the invoice date or the delivery date?

    If free upgrade is available to those who purchase after 6 June 11, Purchase should mean the order date or the invoice date or the delivery date?

    Apple usually has gone by the invoice date, which is the date Apple usually considers to be the "purchase date" for warranty and other programs, but precise details for the Mac OS X 10.7 Up-To-Date program have not yet been released, so that may differ. We'll have to wait until they open the program to know for sure.
    Regards.

  • Which is the order to execute the insert to database?

    Hi everybody:
    My scenario is PROXY - > JDBC. I have a Message Type where the are information for to insert into two tables.
    <MT_ParentNode>
         <StatementTable02>
              <NameTable02 action="UPDATE_INSERT"></NameTable02>
              <table>BDTable02</table>
              <access></access>
         </StatementTable02>
         <StatementTable01>
              <NameTable01 action="UPDATE_INSERT"></NameTable01>
              <table>BDTable01</table>
              <access></access>
         </StatementTable01>
    </MT_ParentNode>
    Which is the order how insert the datas? First insert the datas in table BDTable02 and last in BDTable01 or not matter tha position?
    Thank you in advance.

    Hi Vera,
    The data will be inserted in the order you have mentioned in the Message Type,
    in your case, data will be inserted first into 'StatementTable02' and then 'StatementTable01'.
    -Tanaya.

Maybe you are looking for