What is the password for user CONTROL?

Hello experts,
I just installed MaxDB 7.8 64bit, but i can not login successfully.
I opened Command Prompt, enter sqlcli, and then /c -d MaxDB -u CONTROL,123abc
system told me authentication error, sqlstate 28000......
I feel strange that the password was specified by me during installation process, but why it can not be connect?
I also tried password CONTROL but also failed.
Could anyone help to give me some suggestions?
Thank you so much

Zifang Li wrote:>
> Hello experts,
> I just installed MaxDB 7.8 64bit, but i can not login successfully.
>
> I opened Command Prompt, enter sqlcli, and then /c -d MaxDB -u CONTROL,123abc
> system told me authentication error, sqlstate 28000......
It doesn't work because CONTROL is not a sql-logon.
It's a DBM (database manager operator) logon.
This kind of user manages the database instance. Starting up, shutting down, taking backups - that kind of stuff.
This is the user that moves the box.
It doesn't have the option to look into the box.
CONTROL cannot logon via SQL to the database.
Either use dbmcli to connect to the DBMServer or use a different SQL user to logon.
BTW: this stuff is well documented in... wait for it... wait... THE DOCUMENTATION.
WOW.
There you have it.
regards,
Lars

Similar Messages

What is the password for 'oracle' user created during XE installation?

Hi,
What is the password for 'oracle' user automatically created when XE is installed?
I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
Please let me know or point me to the document.
Thanks,
N

Hi Jari,
I tried your suggestion, but it didn't work unfortunately.
When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
Thanks,
N

Steps to find the password for users as sysdba

What are the steps to find the password for users in dba_users as sysdba?
It is in encrypted form ? How can I view it ?
Pls tell in steps ?

I asked for sysdba
When he can change password why can't he view ?Can you see the users password on a windows domain? No
Can you see the users password on a Unix box? No
Can you see the users password on a mail server? No
Why would it be different in Oracle?
Why is hacking coming here ?Because it's something against the way the software works.
This can, and is, dangerous to let the administrator (Oracle, MsSQL, Win*, Unix,...) know the users password for so many reasons. For example:
. Privacy
. Etiquette
. Password reuse (password reused for Bank account, etc)
. [insert a whole bunch of other good reasons I'm not going to bother writing]
And anyway it is useless!
Yoann.

What is the password for predefined SYSTEM account

Hi ,
i am trying to use predifined account called as 'SYSTEM' to assign priviliges to a user .
But i am unable to login into SYSTEM account .
please tell me what is the password for this SYSTEM account . . Thanks

If anybody has forgotten their SYSTEM account , do this way
Start SQL*Plus (Start -> Programs -> Oracle – Instance Name -> Application Development -> SQL Plus).
At the login prompt, in the user-name field, type ”/as sysdba” (including the forward slash, but without the quotes). Click OK.
You are now connected as system with full DBA rights.
To reset the password of the SYSTEM password (or any other user password), run the following query:
alter user system identified by NewPasswordHere;
Keep helping others .

What is the password for the ipad backup,

What is the password for restore, is it different than the other password used to view my account

There is no default password for an encrypted backup. That is a password that the user sets up. Only you will know what password you used.You would have set up the password. If you don't know what the password is for the backup, you will not be able to restore from that backup.

The IMAP server ... rejected the password for user ...

When I went to bed last night, Apple Mail (Lion, MacBook Pro) worked fine on my home IMAP server, as they have done for some time.
This morning, I cannot log in and I now get the following error message:
The IMAP server “...” rejected the password for user “...”.
The password is definitely correct. I have typed in the password repeatedly (although it was already correct) to no avail - I just get the same error message again.
Since then, I have tried:
my Linux laptop using Thunderbird
my Xoom (running Android ICS) and K9
my SGS2 (running Honeycomb) and K9
my iPad 2 using IOS Mail
Roundcube (webmail client) on the MacBook Pro itself (so no connectivity issues)
and all still work perfectly. There have been no changes to my mail server (which is Dovecot running on Debian Squeeze, which has been running flawlessly for years) and none to my MacBook Pro (unless they were silent).
I have tried deleting all the relevant items from my keychain, but that has made no difference either.
Any ideas because I'm stumped?

Since I posted this, there has been more, but slightly different, weirdness.
In the middle of a session yesterday, Apple Mail started to do something different. When I typed in the password, it briefly worked (downloading one or two messages) and then the error dialogue box popped up again so clearly the password was always correct.
A short while later, it accepted the password and stopped complaining until ten minutes ago. This time I only had to type in the password once and it is working at the moment but who knows how long for?

The POP server rejected the password for user

Hi Im new to this forum but need help! I can usually fix most things on my mac but the last 2 weeks mail will not recieve any incoming messages as is just says "The POP server “mailin.macmail.com” rejected the password for user “****”
I have looked at other postings and tried keychain etc but nothing will work. This happens with 2 accounts one from macmail and one from NTL (my ISP) I can send mail fine (no password) and can go on to webmail and get my messeages fine on both accounts.
Does anyone have an answer for this?
Many thanks

Sorry I can't be of help, I know of others with this problem. In my case I have two accounts that don't work in Mail whilst the other accounts do. I suspect it may be a bug as I've been looking for a solution for sometime. My current solution is to collect the mail on those accounts with an XP netbook which is probably not very helpful!
I have also tried the Keychain repair and at least for a short while it looked as if it had fixed it.
Any ideas anybody before I go through the hassle of reinstalling everything?
D

HT201441 Hi I bought a second-hand phone iphone4, I update the software when you want to activate the phone asked for my registration icloud I do not know what is the password for this registration, can you tell me how to go to the next step without such

Hi I bought a second-hand phone iphone4, I update the software when you want to activate the phone asked for my registration icloud I do not know what is the password for this registration, can you tell me how to go to the next step without such registration in icloud
my ICCID is 8935905000307066111

Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

What is the password for "Get Text Rect.vi"

What is the password for "Get Text Rect.vi" I need it to add a password to my code, which uses this error handler provided by LV.
Tim Burroughs
email:[email protected]
email:[email protected]

That is a an NI VI and they will not give you the password.
When saving your VI makes sure you UN-CHECK the "Include vi.lib files" option.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Mail: The POP server rejected the password for user

I am completely unable to use Mail.
I keep getting the "The POP server rejected the password for user" on two of my accounts.
The password has not changed and I have entered it correctly.
The accounts just will not go online.
This started yesterday when an old machine accidentally fired up mail and tried to connect using the same user details. Since then, my MacBook Pro is not able to connect to my mail.
My iPad and my iPhone can. There is no problem at the server or the ISP. I have also run the Keychain repair utility.
Please can you advise how I should fix it? Plist? Define the accounts again?
Any ideas welcome.
Thanks

Sorry I can't be of help, I know of others with this problem. In my case I have two accounts that don't work in Mail whilst the other accounts do. I suspect it may be a bug as I've been looking for a solution for sometime. My current solution is to collect the mail on those accounts with an XP netbook which is probably not very helpful!
I have also tried the Keychain repair and at least for a short while it looked as if it had fixed it.
Any ideas anybody before I go through the hassle of reinstalling everything?
D

What is the password for the wifi connection littlebarn?

What is the password for the wifi connection littlebarn?

You will need to ask the owner/administrator of the littlebarn WiFi network.

What is the password for tiger guest

what is the password for tiger guest on ciso connect

justonce2314 wrote:
what is the password for tiger guest on ciso connect
Open Cisco Connect and on Guest Access Window you will see there the settings for your GUESTACCESS NETWORK.
♥'s TECHNICAL

What is the password for unlock iPhone backup file in iTunes ?

Last night I updaite my 3GS to iOS 5 and as you know I lose all my data information such as my photo video an the most important contact list . I had back up of that information in my last iTunes 10.5 but it says me "ENTER THE PASSWORD FOR UNLOCK THE iPHONE'' . I don't know what pasword it want . Can someone help me ? I seriously I need my data .
Thank you

Ragazzi, io ho avuto lo stesso problema ieri sera. Dopo svariati tentativi, leggedo su di un altro post simile sempre in questa comunità. La password richiesta non è altro che la password di accesso del vostro pc. Lasciate perdere quella user dell'id apple ecc io ho fatto mille tentativi. Appena immessa la password della macchina il ripristino è partito correttamente ed ora il mio iphone 4 funziona di nuovo!
Guis i had the some problem last night. After some try i read a similar post alwais in that comunity. The request password is the same of your laptop or pc. dont'try the password of your id Apple account or other i have tried a thousand time but nothing! just write the pc password the restore, it's correctly start, and now my Iphone 4 it's ready for use! sorry for my english!

What is the password for start and Shutdown Oracle8i?

Dear all,
I Can not know the password for shutdown and start(lost the password)
My Sid & Global database is : ORCL
After install complete
Just do below step:
Step 1 Start up/Mount my installed database with Oracle 8 SQL Plus.
Connect as system/manager.
Alter user sys identified by sys;
Step 2 Connect as scott/tiger.
Select * from emp;
After I do this when I want Shutdown Oracle8i
system ask my enter password!!
can anyone help me?
Nick wong

try the following
svrmgrl
connect internal
startupor
svrmgrl
connect internal/oracle
startupIf you have a standard installation here are the passwords:
Userid Password
Internal Oracle
Sys change_on_install
System Manager
BTW the documentation states how to change all of the passwords. There is a big security hole if you do not.
Also there is a DBA discussion group where you can post database questions.

What is the password for "Public Fox Authentication"- Can't download plug-ins without the password

when attempting to download Adobe Flash on my desktop after updating my foxfire, i click on update adobe flash. When I click on the update i get a screen entitled "Public Fox Authentication" which requires a password.
What is the password? I have attempted several PW's, with no success.

The password would have been set by you or somebody else using your computer. You can remove the password, for details of how to do this see the develop comments at https://addons.mozilla.org/en-US/firefox/addon/3911/

What is the password for user CONTROL?

Similar Messages

Maybe you are looking for