What is the PC version of the Airport Express?

My first generation AirPort Express is on its last legs. I have some new PC products which I'd like to continue to run iTunes and AirPlay. Is this still possible with PC and a router? What does my future look like? Thank you.

A new AirPort Express will work just fine with your new (and old) PCs and router.....if that is what you are asking.

Similar Messages

  • I just replaced my airport extreme and now the amber light on my airport express is flashing and so it is not being recognized.  I have been on the computer and gone to airport utility and it is simply not showing up at all.  What can I do?

    I just replaced my airport extreme and now the amber light on my airport express is blinking.  When I go to utilities and try to find the airport express it does not show up.
    What should I do?

    Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

  • What is the last version of the Apple OS that supports Eudora and Quake III? (I'm at 10.4.11)

    Hi There,
    I am having vertical line issues with my G4 PowerMac Quicksilver (April 2002)..  Red or purple lines and sometimes they connect to the pointer arrow.
    I thought it was the graphics card but when I ran the Apple Hardware Test Disk version   1.2.5 it failed at the Logic board, although it's an after market Logic board because one of my (2) 1 gig processors died a few years back so I don't know if the hardware test disk is still valid with an after market Logic board?
      Also What is the last version of the Apple OS that supports Eudora 6.2.4  and Quake III? (I'm at 10.4.11)
    Thanks for any and all help, I think my time is limited in my old Mac..
    Eric

    Hi-
    I'd strongly recommend replacing the thermal compound on the Radeon 9800 Pro. It could very easily be a simple matter of lack of cooling which is causing your issue.
    I have a tutorial here:
    C874D84E-96DD-4DFF-9566-7C66BE065BB5.html
    16196A0F-952B-47ED-A9F9-91F7B0ECA431.html
    Use Arctic cooling MX-4 compound.
    As for drivers or ROM updates, if the card is a flashed one, don't bother with the firmware. All ROMs are the latest firmware.
    In Tiger, there is a retail driver update that you can try:
    http://support.amd.com/us/gpudownload/Pages/jan2005updater.aspx
    No updates needed for Leopard.
    Eudora should be fine:
    http://lowendmac.com/misc/10mr/mb0910.html#1
    Quake is fine. This coincides with my observations:
    http://www.insidemacgames.com/forum/index.php?showtopic=31884

  • I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?

    I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?

    It's very simple. If you want to use iPhoto, just let it manage things as it does. Other than that: Export from iPhoto and delete the image from iPhoto. That will remove the master and all versions.
    If space is an issue... use an external disk.
    Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    Regards
    TD

  • What does the field  "Version of the Reporting Component" in the table RSZC

    Hi Experts,
                       Was wondering if any of you have the answer to the following:
    The table RSZCOMPDIR stores details of the queries.
    Now the field "Version of the Reporting Component" in this table contains many different values viz. 0, 11, 13, 15, 100, 101, 102 etc.)
    However, am not sure if this field denotes the object type....for e.g. bot calculated & restricted key figues may have version 15 etc.
    So, in a nutshell, what does the field  "Version of the Reporting Component" in the table RSZCOMPDIR signify?
    Thanks,
    Bala

    I have not seen this done for CVI but I believe for all Microsoft functions such as this you would use ActiveX to call the Word, Excel, and possibly powerpoint ActiveX classes.
    Ian M.
    National Instruments

  • I want to repurchase the widescreen version of the wizard of oz, itunes won't let me repuchase it, and wants to download my old non widescreen version, what can I do ?

    i want to repurchase the widescreen version of the wizard of oz, itunes won't let me repurchase it, and wants to download my old non widescreen version, what can I do ? I would like to have the wide screen version, how do I accomplish this?

    Hello,
    Please see What userid & password do I need to install Flash Player?.
    Maria

  • What is the current version of the iPod firmware?

    Hello,
    I'm currently running the "other OS" and can't get iTunes.
    Could someone please tell me what the current version of the iPod firmware is? This way, I'll know whether I need to go to a Mac or PC computer to update the firmware of my 5th gen iPod. Thank you very much.

    This question is now answered. I wonder if there's a webpage that will post the most current version number when the firmware changes. I guess I could keep asking every now and then. Or one of the Apple iTunes users can update all of us when iTunes lets him know that version has changed.

  • What is the current version of the Finder?

    What is the current version of the finder?
    10.4.6 ?

    10.4.6 in the PPC version of 10.4.8; may be different in the
    Universal Binary version.
    Russ

  • I just installed Yosemite. iPhoto is gone, and Photos does not open.  Instead, I am prompted to update to the latest version. The App Store tells me that is not available in the US.  What do I do?  Cannot access any photos.

    I just installed Yosemite. iPhoto is gone, and Photos does not open.  Instead, I am prompted to update to the latest version. The App Store tells me that is not available in the US.  What do I do?  Cannot access any photos.

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Download and install the OS X Yosemite 10.10.3 Combo Update.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • I downloaded Yosemite and now my iPhoto has a bar across it and will not open. I need to update to the latest version. The app store says the latest version is not available in the Canadian Store. What can I do.

    I downloaded Yosemite and now my iPhoto has a bar across it and will not open. I need to update to the latest version. The app store says the latest version is not available in the Canadian Store. What can I do.

    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • What kind of TV-Out is on the 64MB Version of the MSI Geforce4-Ti4200?

    It´s very important for me:
    What kind of TV-Out is on the 64MB MSI Geforce4-Ti4200? And what kind is on the 128MB Version? (The same?)
    Thanks
    Bloody Judge

    The hub is not compatible. It sounds like the unit is powering the link to the TC.. which would cause the TC to freeze up. You might need a special USB cable which has just data connection but no power.
    It is really hard to get info on hubs that work.. particularly because there are so many around and many are changed .. eg if you buy a belkin this year it fails when last years one worked.. that is because all the manufacturer is farmed out to various factories in China who use .. the cheapest parts available today to build them.. next week it could be different.
    The TC just doesn't have a huge amount of memory to store drivers for every USB under the sun. So some work some don't. The best I have found is the cheapest brand x USB2. I would not bother with USB3 since that chipset is even more unlikely to be supported than USB2 ones.
    I have tried to get people to add to a database.. not much so far.
    https://discussions.apple.com/thread/5912861?tstart=0
    Appreciate anyone who takes the time to add their experience.

  • Help tells me that i am up to date with the latest version BUT the firefox start link tells me i am NOT on the latest version. what is going on?

    help tells me that i am up to date with the latest version BUT the http://www.google.co.uk/firefox?client=firefox-a&rls=org.mozilla:en-GB:official link tells me i am NOT on the latest version. what is going on?.
    also:
    please can sync also copy my addons too?

    Firefox is a web browser not a homepage.
    It sounds like you you have the old www.google.com/firefox/ start page that used to be the default homepage in Firefox before Firefox 4.0 sometime. It is not being maintained by Google anymore so either ignore the message or while in Firefox go to Tools->Options->General->Homepage section and change your homepage.

  • What is the best way to use Airport Express?

    What is the best way to use Airport Express?

    It would really depend on your networking goals.
    The AirPort Express can be used for a number of things:
    Internet router
    Wireless Access Point
    Ethernet switch
    Wireless Ethernet bridge
    Network print server
    AirPlay speaker
    Portable travel router
    ... or some combination of the above.

  • HT4259 When a Netgear N 300 wireless router is the base station for my network, what steps do I take to add AirPort Express 802.11n as an network extender?

    When a Netgear N 300 wireless router is the base station for my network, what steps do I take to add AirPort Express 802.11n as an network extender?

    You don't have to do anything to the netgear.. the Express cannot wirelessly extend non-apple networks. You must plug the Express in by ethernet and create a new wireless network.. this can be the same name (SSID) and security as the netgear so it can become a roaming network.

  • My new IPad Mini tells me that I need Itunes 10.7 when connected to my Apple computer. When I try to up grade, I'm told that there is no newer version than what I have. IPad mini says I have system version 6.1.3. The ITunes version on the Mini is unknown.

    My new IPad Mini tells me that I need Itunes 10.7 when connected to my Apple computer. When I try to up grade, I'm told that there is no newer version than what I have. IPad mini says I have system version 6.1.3. The ITunes version on the Mini is unknown.

    The problem is that your Mac software is quite old.  You must have a version of OS X on your Mac earlier than 10.6.8 (current is 10.8.3), so your particular version of OS X cannot support any later version of iTunes.  (The current iTunes version is 11.0.2).  In particular, your iTunes on your computer cannot deal with your iPad which has software that is much more current than your OS X operating system (and Mac iTunes).

  • What do I do with my old CS4 when downloading the new versions from the cloud?

    What do I do with my old CS4 when downloading the new versions from the cloud?
    Do I just uninstall via the control panel on my computer?

    if you no longer need cs4, deactivate it (help>deactivate) and uninstall it.
    otherwise, leave it installed along with cc.  you can use both if you need.

Maybe you are looking for