What is the pink line in the scrubber bar of the viewer?

I'm currently editing a multi cam project and there's a pink line in the scrubber bar of the viewer? At the "in point" of the line there's a triangle on top, at the "end point" there's a triangle on the bottom. Does anyone have any information of what caused it and/or how to get rid of it.
Thanks

Not familiar with a pink line...
This is a split edit marked.
If that is what you are seeing hit option x to clear.

Similar Messages

The bookmarks toolbar is there but has no item buttons on it. How do I get the items back for this toolbar? Also would like to know if the toolbars can be put on the same line to make more room on the page (drag & drop) ??

The bookmarks toolbar is there but has no item buttons on it. How do I get the items back for this toolbar?
Also would like to know if the toolbar can be put on the same line to make more room on the page (drag & drop) ?? Like the menu & bookmarks toolbar could/should fit on same line. This would add more page view...
Floyd Perry
Thanks

Check that you still have the "Bookmarks Toolbar items" placed on the Bookmarks Toolbar
* Make sure that you have the "Bookmarks Toolbar" visible: "View > Toolbars"
* Check in "View > Toolbars > Customize" that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize window onto the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" then click the "Restore Default Set" button
You can only move the content from a toolbar onto other toolbars if all toolbars support that feature. You need to check that in the options of each toolbar.

Is there any way in Mavericks to go back to the old "line label" color strips instead of the new mini dots, which are virtually worthless they are so small and faint.

Is there any way in Mavericks to go back to the "full line" color label as opposed to the mini dots, which are too small and faint and virtually worthless?

Unfortunately, not.
You can file feedback here. The more who file the more chance it will get done.

What could be wrong with my iMac? When switched on the screen displays the apple logo with a busy bar at the bottom of the screen. This displays the progress of the computer trying to do something. To fill the bar takes about 30 mins and then switches off

What could be wrong with my iMac? When switched on the screen displays the apple logo with a busy bar at the bottom of the screen. This displays the progress of the computer trying to do something. To fill the bar takes about 30 mins and then switches off

Which OS X is installed?

Drag JTabbedPane out of the main Frame and set scroll bars for the tabs

hi ,
Iam working on a Swing application . In it i have Six Tabs added to a single JTabbedPane. all the tabs are different class files . is it possible to drag any of the tabs out of the frame.
how to add scroll bars for the tabs individually. i have tried adding JScrollPane to the main frame and add the JTabbedPane to the Scrollpane . the scroll bar was not visible and i have tried adding
all the six tabs to the individual JScrollPanes and add the six scrollpanes to the TabbedPane .
only the scroll arrows are visible , when i minimised or resized the application the scrollbars were not appearing .
could any one help me to solve the above two problems.

just trying.....
public void mouseDragged(MouseMotionEvent e){
// this event should be activated only when the Drag goes out of scope of the parent JFrame which i dont know how
Component c=JTab.getComponentAt(JTab.getSelectedIndex());
JFrameobj.getContentPane().add(c,"Center");
}

I have an old PowerPC and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same router, but the old Mac connects with full bars, but the MBP struggles with only 2. Pls help, thanks!

I have an old PowerPC running 10.4.11 and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same wireless router. The old Mac connects with full bars but the MBP struggles with only 2 bars. Pls help, thanks!

BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name:          Power Mac G4
Machine Model:          PowerMac3,5
CPU Type:          PowerPC G4 (2.1)
Number Of CPUs:          1
CPU Speed:          800 MHz
L2 Cache (per CPU):          256 KB
Memory:          768 MB
Bus Speed:          133 MHz
Boot ROM Version:          4.3.3f2
Serial Number:          XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host>

What are these pink lines??

I work on a (New) MacPro with 32GB mem. The first few productions i did was not a prblem at all. Since I use the Atomos Ninja Blade these pink lines apear every few seconds. When I export with 2 pass vbr bitrate encoding they disappear but it pretty annoying to work with. Does anybody have a clue?

martijn baudoin wrote:
I work on a (New) MacPro with 32GB mem. The first few productions i did was not a prblem at all. Since I use the Atomos Ninja Blade these pink lines apear every few seconds. When I export with 2 pass vbr bitrate encoding they disappear but it pretty annoying to work with. Does anybody have a clue?
Are you using MPE in hardware accelerated mode? There's a mega-thread about this problem; a known issue with OS X 10.9.3 (and maybe .2), solved in the beta for 10.9.4. Read up. If it's the same issue, you'll want to disable hardware acceleration for the time being until OS X 10.9.4 is finally released. Or, you could sign up for the OS X beta.

In the case I've deleted a clip in the tim line it's also deleted in the clip window

I'm just starting with FCP and I've a problem concernig deleting a clip in the time-line. What is the correct way to delete it only in the time line?
Thx a lot for your help

You've opened the in the timeline, instead of in a Project, so when you delete it, it's lost from the browser.
You can delete clips from a project without deleting them from the Browser. To create a project, use the film canister icon at the bottom left of your screen.
Andy

After a series of very short power outages in my town our Imac boots with the pinwheel going and a progress bar, then the users screen comes up but our passwords no longer opens up desktops, just returns to the users choice screen. What should I do?

I'm on the choose a user screen and when I enter the password the screen goes white then returns to choosing a user. The system is rebooting differently when I tried turning off then back on, the pinwheel screen has a progress bar and it takes minutes instead of seconds.
what should I try?

You can try an SMC reset, especially if there was a power outage.
http://support.apple.com/kb/HT3964
If the issue seems like it just doesn't want to accept the password you'll need to boot to the install disc/recovery partition of the hardrive by holding the 'option' key while booting up. There should be a utility in there to reset your password.

How do I get the top lines i my toolbar back? The top line starting with 'file' on the right and the second line which contained the refersh button as well as the search bar have disappeared. How do I get them back?

The first two lines of my toolbar have gone. I'm left with most visited but the lines above, containing the refresh button, bookmarks and search bar and above that containing the links to files etc have gone, how do I get em back?
== I was fiddling with the different bars and must have clicked sth I shouldn't have.

Alt V
T
M
Be sure to do this in a new blank tab.

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

HT3783 I have created a distribution list of 22 names in my Contacts Folder. When I try to send an e-mail using the alias, only 7 of the 22 names appear in the address line. Why don't all the names appear?

I have created a mail box with 22 names in it. When I want to send an e-mail to this address and its recipients, only 7 of the 22 names appear in the address line of the e-mail. Why won't the remaining 15 names and addresses appear in the address line?

okay, this is actually a common problem. from your main screen select the blackberry key (next to track ball)->options->security->general settings->include address book->no->reset phone->problem should be fixed!
let me know if this works for you,
Andrew
Andrew Hager
U.S. Cellular Corporation
Smartphone Specialist

Merge the total line about header and item in the Hierarchical Seq ALV

Hello guys,
Now i used CL_SALV_HIERSEQ_TABLE to create a Hierarchical Sequential ALV. but there are two total lines, one is to calculate the numerical fields in the header(main) and another is calculate the numerical fields in the item(slave).
my requirement doesn't contain the calculation for header line, so the first line is unuseful and i want to merge these two line.
how i should do with it?
Any clues is appreciated.
Thanks a lot

could anyone help me? i am very urgent!

How do you change network settings at the command line when they were set in the

Ubuntu server setup in a remote location awhile ago, with GUI packages. Currently at
version 14.04 LTS. There is ssh access to the remote server.
After a lot of digging thru typical command line configs and not finding the existing
settings anywhere, it appears the only way to update existing settings -- DNS
name servers, IP's, etc. -- is using a GUI method, such as gsettings or unity-control-center.
However,
gsettings doesn't appear to have those particular items.
Is
the only option to use a remote version of Unity .... or just get someone
on-site and remedy this thru the GUI?
This topic first appeared in the Spiceworks Community

Hi and thanks for your reply,
I used one mini DV Tape for my footage and captured the whole thing into CS6 in one go and so the capture should have been the same throught all of the film. Once I had edited the tape on to the timeline some of the clips are 16.9 widescreen and others are 4.3 standard.
Help!!!!!

There is a blank line below URL tool bar and the bookmark tool bar

Under View->Toolbars, Navigation & Bookmarks are checked. On my screen I have Navigation (aka URL) toolbar, a blank line, and then the bookmarks toolbar. How do I get rid of the blank line? It is still there is I uncheck Nav & Bookmark toolbars.

Are there any other toolbars listed in View > Toolbars?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

What is the pink line in the scrubber bar of the viewer?

Similar Messages

Maybe you are looking for