What is the pinout for the 6602 relative to the 'D' connector.

I am developing a custom board to connect with the PCI-6602 Counter/Timer card. I will use the SH68-68-D1 Shielded Cable, 68-pins, 2 m to connect from the 6602 to the custom board. What I need to know is what is the pinout relative to the 'D' connector. The manual shows the connector as a rectangle.
Thanks,
Tony

Hi Tony,
The routing from the PCI-6602 through the SH68-68-D1 is one-to-one, so I believe that all you should need is the pinout for the 6602. This is shown below.
This information can be found in Measurement & Automation Explorer (MAX) by right-clicking on the device and selecting "Device Pinouts".
I hope this is what you needed. Post back if you have further questions.
Ed W.
Applications Engineer
National Instruments
Message Edited by Ed W on 12-13-2006 04:14 PM
Message Edited by Ed W on 12-13-2006 04:14 PM

Similar Messages

HT1926 When I try to install the update for iTunes, I keep getting the message "the application attempted to load the C runtime library incorrectly. Contact the vendor. I don't know if it's related, but my Microsoft Outlook is totally f*k up. What's go

When I try to install the update for iTunes, I keep getting the message "the application attempted to load the C runtime library incorrectly. Contact the vendor. I don't know if it's related, but my Microsoft Outlook is totally f*k up. What's going on?

Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!!

What is the need for setting property data inside the JMSMesage

Hi
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball");
and also please tell me how can the MDB recievies this property data ??
Thanks in advance .

raviprivate wrote:
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
>
and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties.

I am unable to download the update for my ipod.."the network connection has timed out". my internet is working fine, i have the latest iTunes..whats going on?

i am unable to download the update for my ipod.."the network connection has timed out". my internet is working fine, i have the latest iTunes..whats going on?

Temporarily disable/turn off your anti-virus and firewall software and try the download again.
Stedman

I reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

i reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

Click here and use Apple's iForgot service, or contact their Account Security team, or if you're the device's original owner, take it and its purchase receipt to a physical Apple Store.
(124525)

I was trying to change my password and somehow it automatically reset the password for me and I closed the window and now I can't log in. What do I do?

I was trying to change my password and somehow it automatically reset the password for me and I closed the window and now I can't log in. What do I do?

HI,
This post in in iChat (forum) but I have no idea from what you posted if it is about iChat and if so what account type you were changing the password on.
9:25 PM Wednesday; June 12, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

What is causing this message? The request for account "iCloud" failed. The server responded with "509" to operation CalDAVMigrateToServerQueueableOperation.

What is causing this message. Occurs on both Mini and MacBook Pro.
The request for account “iCloud” failed.
The server responded with
“509”
to operation CalDAVMigrateToServerQueueableOperation.

Follow the links given in the right panel, under "More Like This", they should provide answers.

I have Mac OS X Version 10.6.8 ,I want to buy the updated operating system that puts iMessage and Facetime on my Macbook Pro. What should I search for, and then purchase, in the App Store?

I have Mac OS X Version 10.6.8 ,I want to buy the updated operating system that puts iMessage and Facetime on my Macbook Pro. What should I search for, and then purchase, in the App Store?

FaceTime can run in the version of OS X that you currently have. To get Messageyou need Mountain Lion. The protocol used by Messages is iMeassage.
The question is does your MBP meet the specs for Mountain Lion.
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory
8 GB or more of available space

I cannot install the trial for Acrobat XI Pro. The file downloaded fine, but it does not open. What can I do?

I cannot install the trial for Acrobat XI Pro. The file downloaded fine, but it does not open. What can I do?

For Windows:
http://trials2.adobe.com/AdobeProducts/APRO/11/win32/AcrobatPro_11_Web_WWMUI.exe
For MAC:
http://trials2.adobe.com/AdobeProducts/APRO/11/osx10/AcrobatPro_11_Web_WWMUI.dmg
ACROBAT XI

The app for texting that comes with the phone keeps crashing what should i do?

the app for texting that comes with the Iphone keeps crashing what should i do?

Have you tried any of the Basic Troubleshooting Steps...
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If so... What were the Results...?

What apps are avaible for itouch generation 1 in the app store

What apps are avaible for itouch generation 1 in the app store? Is there a list?

To make the search easier:
apps for 4.2.1 (also works for 3.1.3)
Finding iOS 4.2.1 Apps Compatible with Older Devices - Apple Club

What permission is needed for a login to access the restored database(backup from different server)

what permission is needed for a login to access the restored database(backup from different server)
frequently reach the situation, when vendor restores a database, but he cannot access it unless I remap or add his login to the restored database. What permssion can grant the vendor so that he can but only can access the database he restored, not all other
databases.

Hi George,
According to your description, When you move a database from one server that is running SQL Server to another server that is running SQL Server, a mismatch may occur between the security identification numbers (SIDs) of the logins in the master database
and the users in the user database. As other post, you can use the sp_change_users_login stored procedure to map SQL Server logins. Also , you can use the following statement after doing the restore database. It will
fix the mis-mapped SID inside the restored DB.
ALTER USER <username> WITH LOGIN = <username>
For more information, you can review the following article.
http://blogs.lessthandot.com/index.php/DataMgmt/DBAdmin/MSSQLServerAdmin/do-you-still-use-sp_change_users_login/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

L do not see an orange line in the browser for clips that are in the timeline. What do I do?

How do I get the orange line to show in the brewer for clips that are in the timeline. Mine doesn't show it.

I called Apple and said it is a glitch which caused me not able to see a registration key. They sent my $30 back so I will make another order of Quicktime Pro 7 to get registration key.

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns but I can cut and paste them so I know they are still there. Has this happened to others

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet. I have charts and other stuff related the the original table so I need to figure out why I can only see from column C forward. I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?

I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).

I have never been able to use the Macmail feature. Running OSX 10.4.11, and the problems appear to be related to the fact that I originally registered my computer with apple, I subsequently changed my e-mail address. Have since upgraded the e-mail addre

I have never been able to use the Macmail feature. Running OSX 10.4.11, and the problems appear to be related to the fact that when I originally registered my computer with apple, I used an old e-mail address which is now defunct. Have since upgraded the e-mail address in account manger, but it still locks me out and rejects my user name and password when I try to log in. It seems it established an account for me automatically when I first fired the beast up, but now the Macmail program is uncooperative with me. Any assistance would be much appreciated, Thanks

Hi rbcjoker76, and a warm welcome to the forums!
Sounds like some needed System Fonts wre replaced by bad ones. Y also have Font Book in Applications for validating fonts & checking for duplicates.
Required Fonts from 10.3, much the same in 10.4...
http://support.apple.com/kb/HT2444?viewlocale=en_US
You may have to get Pacifist...
http://www.charlessoft.com/
then intall the Fonts what you need from your Install Disk.
Or do a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

What is the pinout for the 6602 relative to the 'D' connector.

Similar Messages

Maybe you are looking for