What is the port numbers for ICMP,TCP,UDP

Hi,
for these protocols, the correct term is (IP) protocol number; the numbers are 1, 6 and 17.
http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
HTH
Rolf
Sent from Cisco Technical Support Android App

Similar Messages

What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.

Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

PCI 6036E/SC 2075, can read only from ch 2,what are the ports used for ch 1 and ch 2

in VB, using measurement studio. I am using CWAI. how to specify which channel to read from. right now, it is reading from ch 2 without me specifying it. thanks

Benje001,
Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
Hope that helps!
Regards,
Shannon R.
Applications Engineer
National Instruments

Changing the Port numbers in EBS R12

Hi
please suggest me the documents for changing the port number in R12 .
thanks
Simha

Hi,
Please see
If you want to change the Web listener please see.
How to change the Web Listener Port number in Oracle E-Business Suite Release 12? [ID 760590.1]
If you want to change the port numbers for the while E business suite, then cloning is the best option.
While running post clone, select the port pool you want.,
Thanks

Fixed the port numbers

Hello All,
My OS is SLES 8 (SuSE Linux Enterprise Server 8)
Currenly my system randomly using different port numbers when I used FTP utility.
How to fixed the port numbers for FTP?
I want to use only port 20 & 21 for FTP.
Regards,
Dawar

I am seeing the same behavior as mentioned by mr.p-funk.
I am setting IgnoreHWSerNumXXXXYYYY = 1 in the Registry for a specific printer model (VID=XXXX, PID=YYYY).
When each printer of the SAME model is connected to the same USB2.0 port, the "ignore serial number" works as expected,
(i.e. multiple printers of the SAME model can be connected to the SAME physical USB port on the PC without creating a different "print queue".)
However, when connecting the 2 printers to a USB3.0 port, it does NOT work. Instead, it behaves as though IgnoreHWSerNumXXXXYYYY
in Registry is set to 0 instead of 1. (i.e. each printer of the SAME model gets a NEW print queue when connected to the SAME USB port on the PC.)
I work for a printer manufacturer, and being able to "Ignore the USB Serial Number" is something we use with customers quite often.
So, if there is a way to make this work when the printer is connected to a USB3.0 port on the PC, we need to know about it.
Sorry Alex Zhaozx, but Kate Li's response is NOT the answer to the question. She only describes the behavior a user will see when this Registry setting (=1) is working correctly,
i.e. with a USB2 port. We are asking about HOW to make it work with a physical USB3.0 port on the PC.

Destinations and TCP Port Numbers for Creative Cloud

Hi
What are the Destination IP's and TCP port numbers that need to be allowed on a firewall to use creative cloud in a secure network?
thanks

Rave wrote:
Hi mccalel,
CS3 is a very very old software and is not a qualifying version for upgrade.
Not sure I follow.
The discounted promotional deal (for the first 12 months) for existing owners of CS3-CS6 suites is what the OP is trying to take advantage of.
https://creative.adobe.com/plans

What is the correct cable for iMac 11,2 Intel core i3, mini dvi to vga or mini display port to vga?

What is the correct cable for iMac 11,2 Intel core i3, mini DVI to VGA or mini display port to VGA to hook up to projector? Thanks!

mini-DisplayPort.
Regards.

What is the port for on the left of the w500 between the eathernet and video monitor connection?

There is a port on the left side of the w500 that is next to the video monitor connector. It looks like an HDMI port but is square on one side. So I do not think it is hdmi. What is that port called and what is it for?
I want to hook up the computer to a tv for the kids to watch netflix.

Hello mate,
It's a DisplayPort (that's its name) It's like an HDMI port but it's different
All you need to plug your tv is a cable DisplayPort to HDMI and it's all good. You normally won't have sound because the port is for video only. You will need to plug a cable from your audio out to your tv.
You can also check there for some tips : http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/No-audio-from-TV-when-connected-to-a-laptop...
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

What are the security risks for opening port 80 on workstations?

Hello all,
in our environment, there is an application which open port 80 on workstations when installed, but it is not allowed on preimeter FW
could you please advise what are the security risks for leaving port 80 opened on the workstations? or it is considered secure unless it is not allowed on the preimeter FW?
thanks alot & regards

Hi R.Naguib.
The 80 port is open by default through the firewall on Windows system, it is used by a http protocol by a browser.
As for the network or hardware Firewall settings, I suggest to turn to the network administrator for details.
Regards
Wade Liu
TechNet Community Support

What are the lighted numbers on top right of sk2023 k3yboard for?

what are the lighted numbers on top right of sk2023 k3yboard for?
This question was solved.
View Solution.

Hello again redhue,
Thank you for the quick reply!
In addition to the three lights you see above your number pad (on the far left-hand side), are there any other lights illuminated on your keyboard? Is it possible to take a picture of where these lights are, and post them? Otherwise, the lights should indicate specific locks:
The Num Lock
The Cap Lock
The Scroll Lock
In essence, these lights indicate when you have locked any one of these three options.
I hope this helps!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

What is the best approach for Continuously reading all DI lines of all the ports of a DIO device?

Hi! I am new to Labview ..... I want to monitor all the DI lines of all the ports of a device .... What should be my approach?

same as this
http://forums.ni.com/t5/LabVIEW/What-is-the-best-approach-for-Continuously-reading-all-DI-lines/td-p...
Tim
Johnson Controls
Holland Michigan

How do i find the port number for oracle10g

Hi,
I have installed oracle10g on my pc running windows XP. I need to get the port number for JDBC drivers used by Java Application when defining a JDBC source.
Java is running on the same machine.
When I installed oracle I was given the links (with port numbers) for EM, ULTRA SEARCH and iSQLPLUS, what I need is the ORACLE10g database port number. Anybody know where I get from ?
Cheers

thanks for the reply the portlist does not contain the port of oracle. The file is below.
[i]Ultra Search HTTP port number =5620
Enterprise Manager Agent Port =
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (oracle10) = 5500
Enterprise Manager Agent Port (oracle10) = 1830
However searching through some other threads found the port to be 1521, which
oracle must set during installation and tell anybody, unless this infor is in the log.
so configured the oracle JDBC driver as below (PE8.2 --> ConnectionPools)
Datasource Classname = oracle.jdbc.pool.OracleDataSource
URL = jdbc:oracle:thin:@localhost:1521:oracle10
User = abc
Password = abc
Now able to ping. Cheers

What are the table names for CRM and APO?

hi friends,
what are the table names for CRM and APO?
Regards
suneel.

hi Suneel,
check in crm forum
Re: SAP-CRM Tables
BUT051 BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA Bank Master Data
BUT100 BP: Roles
ADR2 Telephone Numbers (Business Address Services)
ADR6 SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T Table containing the Title text against a Title No.
COMM_PRODUCT Master Table for Product
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE Master table Business Transaction Type
CRMC_PARTNER_FCT Definition of Partner Functions
SCPRIOT Priorities for Activities with priority text.
CRMC_PROC_TYPE_T Text for a transaction type
CRMC_ACT_OBJ_T Objective Number and Text for Activities
TJ30T All the status code and text
CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
IBIB : Installed Base/Ibase
IBIN : Installed Base Components
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
SMOFSUBTAB : Mapping & Parameters
SMOFDSTAT : Download Monitor (R4AM1)
SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
SMOFOBJECT Definition of Objects for Download
SMOFOBJPAR Parent Objects of an Object in Table
SMOFPARSFA Middleware Parameter
SMOFQFIND Queue Finder Table for MW-Queue finder
SMOFTABLES Definition of Tables for Download

What are the ports need to open at firewall

What are the ports need to open at firewall to access Oracle EBS R12 through internet?

All these following ports need to open at firewall??
Database Port : 1521
RPC Port : 1626
Web SSL Port : 4443
ONS Local Port : 6100
ONS Remote Port : 6200
ONS Request Port : 6500
Web Listener Port : 8000
Active Web Port : 8000
Forms Port : 9000
Metrics Server Data Port : 9100
Metrics Server Request Port : 9200
JTF Fulfillment Server Port : 9300
MSCA Server Port : 10200-10205
MCSA Telnet Server Port : 10200,10202,10204
MSCA Dispatcher Port : 10800
Java Object Cache Port : 12345
OC4J JMS Port Range for Oacore : 23000-23004
OC4J JMS Port Range for Forms : 23500-23504
OC4J JMS Port Range for Home : 24000-24004
OC4J JMS Port Range for Oafm : 24500-24504
OC4J AJP Port Range for Oacore : 21500-21504
OC4J AJP Port Range for Forms : 22000-22004
OC4J AJP Port Range for Home : 22500-22504
OC4J AJP Port Range for Oafm : 25000-25004
OC4J RMI Port Range for Oacore : 20000-20004
OC4J RMI Port Range for Forms : 20500-20504
OC4J RMI Port Range for Home : 21000-21004
OC4J RMI Port Range for Oafm : 25500-25504
DB ONS Local Port : 6300
DB ONS Remote Port : 6400
Oracle Connection Manager Port : 1521

What is the part number for labview fds cd media only

what is the part number for labview fds cd media only - i'll purchase on line but can't find the part.

Randy's definately right - you should talk to your local rep. before makig any purchases, but here's some numbers to start you off:
LabVIEW FDS for Windows2000/NT/Me/9x
776670-03 English
776670N-0313 German
776670N-0314 French
LabVIEW FDS for Power Mac OS
776690-03 English
LabVIEW FDS for Sun Solaris
776680-031 English
LabVIEW FDS for HP-UX
777010-031 English
LabVIEW FDS for Linux
777756-03 English
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

What is the port numbers for ICMP,TCP,UDP

Similar Messages

Maybe you are looking for