What is the possibility that I bought a completely new iPhone with different SN on each component?

Hi all,
M right in the Apple store in Shanghai writing this post. And still feeling bad about what I have experenced today.
Last June, I have got a completely new 4S to replace my old 4, which had encounted many annoying issues when I was using it. And this 4S was a completely new one, I mean, not those officially retrofit ones for ordinary replacement when reparing. Howevewhen the locking button doesn't work well and I came for warranty today. The genius told me that the SN on main board and the sim card support doesn't match and refused to repair it.
Brilliant! This is the FIRST time that I am going to get my new 4S repaired and, BANG! it just became some sucky 4S that I have tried to repair it by myself or some un-official channel? And I think I have never done these things before. Well at least when I am still myself.
Now the genius is trying to confirm this device after I provided my recipt for last repair.
Is Apple became more unefficient and pretty badly servered recently? and BTW can anyone tell me what is the possibility that a so-called new device from Apple has same problem.
Well, guess this might be my last Apple device...

Hi wjosten,
Actually what ****** me off was the attitude from the genius here. I have my iPhone 4 repaired 3 times and 2 of which is replacing the main board. And finally they provided me a new 4S and I appreciate that. However, this time according to their words, seems it was ME who cos all these ****. And finally they agreed to check and confirm the issue for me after I argued with them. I don't think everyone is ok for that.
Yep the world is not perfect. I am, even not so much any more, an apple fan. But this time my patience had been gone really.

Similar Messages

Can you load apps that you bought onto a new Iphone with out hooking the phone up to a computer/itunes

Help!!! I lost my Iphone and thinking of going and getting a new one but at the time Itunes is not working on my computer So I can not hook the new phone up to the computer. What I am wanting to know is if their is a way for me to get the apps I bought on the old phone onto the new one with out a computer? PLEASE HELP!!!!

It will ask you if you want to set it up as a new iPhone or backup from an old iPhone. If you backup from the old iPhone you **might** loose the apps/data that you have downloaded from the point on that you got the new iPhone. You can always redownload the apps from the store.

HT1727 My old computer died on me with no warning signs. I didn't know or need to copy my music to another computer. I would like to know how to get the music that I bought onto my new computer without having to buy it all again.

My old computer died on me with no warning signs. I didn't know or need to copy my music to another computer. I would like to know how to get the music that I bought onto my new computer without having to buy it all again. I just want to be able to get all of my music that I bought on itunes onto my computer. Right now the money ive spent is just gone and I have no music to show for it.

Go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free

HT3819 what is the best way to set up my childs iphone with apple id and as part of home sharing?

what is the best way to set up my childs iphone with apple id and as part of home sharing?

So do I have to hook up an Ethernet cable to both the Uverse AND my computer from the Time Capsule?
I'm not sure that I understand everything that you want to do and where devices will be located.
The Time Capsule must connect to the "main" Uverse router using a permanent, wired Ethernet cable connection. An Ethernet cable can be run up to 300+ feet with virtually no loss, so you should be able to locate the Time Capsule wherever you want.....unless you have a very large estate.
If you want the Time Capsule to strengthen the wireless signal provided by the Uverse router, then the Time Capsule must be located in the area where you need that additional signal strength.
If I understand your post correctly, you plan to install the Time Capsule in the office? When you do this, you can configure the Time Capsule to create a wireless signal that uses the exact same wireless network name and password as the Uverse wireless network.
That will provide a much stronger signal for your Uverse wireless network in the office area. Hopefully, the bedroom that you mention is close to the office, so it will pick up the stronger wireless signal from the Time Capsule.
The iMac in the office can connect to the Time Capsule using another short Ethernet cable connection, or the iMac can connect using wireless. A wired connection is always preferred, if possible.
At this point, I guess the first question would be.......
Do you have a location for the Time Capsule that will be close to the office....and...the bedroom where you want a stronger wireless signal?

HT201269 stuck on the screen that says "Welcome to your new Iphone"

I need some help.. I've recently repaired my iphone 4 and had it in recovery mode. I plugged it in to itunes (using Windows on a PC) and it sorted itself out of recovery mode. A screen then opens saying something like "Welcome to your new iPhone" where my option is to set up as new iphone or restore from backup. (shown as a screen dump under nr 6 in the checklist here: iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device)
I restore from a backup and everything seems to be going allright, when the restore is done iTunes says I will have to go through a setup on my phone. I do the setup and the phone now contains some old photos, textmessages, contacts, web favorites, e-mail setup and other things. But iTunes still shows the Welcome-page! I cant continue with the sync of my music and apps! my only option is to set up as new iphone or restore from backup again. I've tried a number of times to restore from backup and the only thing that happens is a new backup is shown in the scrollbar. (sorry, don't know if scrollbar's even a word..)
Whats wrong? Anybody?

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

I have an old ipod with lots of music on it. I also have a new iphone with different music on it. I want both devices to have the same music etc, without losing anything. How do I do this?? Thanks

I have a ipod touch that has lots of music on it. I recently got a new iphone and a new mac. I would like my new phone to have the same music as my old ipod without losing anything off of either device. Is there a way to do this??

The following User Tip may help you.
Recover your iTunes library from your iPod or iOS device.

What's the fastest way to buy/order a new iPhone?

The apple online store still says "shipping by July 14th". Is there any other method of ordering an iPhone 4 (black, 32GB) that would get it into my hands faster than that?
(I probably won't go down the road of bonking a pre-orderer on the head with a rock, or following a FedEx truck and taking one off of someone's porch)

The apple online store still says "shipping by July 14th". Is there any other method of ordering an iPhone 4 (black, 32GB) that would get it into my hands faster than that?
Doubtful, since production can't keep up with demand and all available units appear to be sold out.

HT201303 i want to remove my card in my accunt i lost that card i got a new card with different security number what should do to remove my card in my account and i forgot my old security number

help

All you have to do is
1: download iTunes on your pc
2.sign in with your apple id in iTunes
3. Click on your id and click on account
4.then click on change billing info to change or view your billing info

Dw, css, and a template, what is the best way to create a 20 page website with a different header in each page?

dw, css, and a template, what is the best way to create a 20
page website with different header content on each page? i am
trying to insert a specific image and background color for each
header on every page. what is the easiest or best way to do this?
thanks, bryan

"mediastream13" <[email protected]> wrote in
message
news:f47bes$9om$[email protected]..
> ok, murray, here is the site.
http://www.helphotline.org
> in I.E. 6 i can't see the background color behind the
header images,
I'm seeing a hot pink background (which is my browser default
- so that I do
remember to declare a background color). You need to add:
body { background-color: white;} to your stylesheet, or into
the imbedded
styles on your page.
In Firefox, the very top black section, #headertop is hidden
behind the
header image.
> background of the date/time isn't stretching the full
length of the
> screen, and
> the margins aren't working in the main content area. how
can i put a
> background
> color behind the header images?
I can see the header image stretching right across the page..
so not sure
what color is missing there.
> is there anyway to download i.e. six on my computer if i
already have
> i.e.7? i
> just want to be able to preview the site before i upload
the changes. it
> seems
> everything works in i.e. 7.
Yes, I used this and it works really well.
http://tredosoft.com/Multiple_IE
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au

What are the possible errors that can happen in data loads(rsmo monitor)?

hi all,
what could be the error that could result in red color in the RSMO monitor of data load transaction?
1. request everything ok
(what are the possible error type which make here red)
2. extraction everything ok
(what are the possible error type which make here red)
3. transfer (idocs and trfc) error occured?
(what are the possible error type which make here red)
4. processing
- data package
5. process chain
(what are the possible error type which make here red)
6 other messages.
(what are the possible error type which make here red)
thanks
pooja

Hi,
I can tell you the most common reasons of these failures.
1. request everything ok
Here it will be telling you if the request was properly send to source system and got triggered there.
2. extraction everything ok
In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
3. transfer (idocs and trfc) error occured?
When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
4. processing
Processing in BW fails for each data packet is displayed here.
This can also happen when you have sysfail in source.
5. process chain
This can show the logs of the chain here and also status of subsequent process.
6 other messages.
Any other error message.
Refer
What is the information we can get the through details tab in RSMO
working with RSMO errors
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also
Data Load Errors
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Data Load issues
Errors in loading
data loading errors
load Errors
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Hope this helps.
Thanks,
JituK

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

My ipad mini was stolen and i have activated the find my phone to lock it. how can i get the serial number off my itunes or icloud profile? and what are the chances that the find my iphone app works when someome erases the device?

my ipad mini has been stolen and i have activated the find my iphone to lock. now it is only a wifi device so what are the chances that a person can get hold of it and log onto wifi without the password of my device to unlock. does that not make the app rather less useful as i have to hope that the person is apt enough to log onto the internet but not enough to erase it and start afresh. is it possible to find my device even afte someone has erased it?

"Losing your iPhone feels lousy. Thankfully, iCloud can help you get it back. But if it looks like that’s not going to happen, new Find My iPhone features in iOS 7 make it harder for anyone who’s not you to use or sell your device. Now turning off Find My iPhone or erasing your device requires your Apple ID and password. Find My iPhone can also continue to display a custom message, even after your device is erased. And your Apple ID and password are required before anyone can reactivate it."
http://www.apple.com/icloud/features/#fmip

What are the entities that can be re-used in different servers, SI App, SI instance? And how?

Greetings,
What are the entities that can be re-used in different servers, SI App, SI instance? And how?
e.g. can I use a deployed IQStreamable@app1 into app2?
can I use a deployed observable/app1/siInstance1/Server1 into another query/app3/siInstance3/server2?
On the presentation titled "04 – Installing, Deploying and Maintaining the SQL Server 2008 R2 StreamInsight Runtime Engine" with file name SQL10R2UPD05-DECK-04.pptx on ecn.channel9.msdn.com/o9/learn/SQL2008R2TrainingKit/Presentations/SQL10R2UPD05-DECK-04/SQL10R2UPD05-DECK-04.pptx
It is mentioned one of the deployment option is "Deployment: Standalone Server"
and it mention the following:
"Use this option for the following scenarios:
- Metadata objects need to be shared between applications
- Event Types
- Adapter Types
- Query Templates
- A data source registered with the server provides an event stream for another existing application"
Could you please provide good example that explain the above statement?
Cheers, Muhammad

First, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful.

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

My macbook is getting hot pretty quickly. What are the possible causes? How can I tell if it is mechanical vs. dust?

My Macbook Pro is getting hot pretty quickly. What are the possible causes? I have had the machine about 3 years.

Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Install iStat Menus 4.05 to provide actual temperature readings and fan speeds.

What is the possibility that I bought a completely new iPhone with different SN on each component?

Similar Messages

Maybe you are looking for