What is the possible impact of running BDLS in wrong client?

Hello,
I've been doing a system refresh from PRD to QUA and as a part of post refresh actions I've run BDLS for each client I have in the system. That system has 4 clients (500,600,700,800) so I've run BDLS 4 times (PRDCLNT500 -> QUACLNT500, PRDCLNT600 -> QUACLNT600, PRDCLNT700 -> QUACLNT700, PRDCLNT800 -> QUACLNT800). The problem is that I've run all four reports from the same client (500).
When BDLS finished and I've been checking the spool reports I found out my mistake - there were over 5.000.000 updates in correct report (PRDCLNT500 -> QUACLNT500) and only 3.000 updates in wrong ones (all other reports).
After this I've started BDLS for the remaining clients (600,700,800) correctly.
<b>The question is - could there be any possible impact on data consistency?
If so - what impact could I expect?
Would be wise to run the BDLS reports in inverse mode (changing the logical names to the original ones) in client 500?</b>
Here is some information that can help - tables with amount of modified records:
BDSX_CON04*                    LOG_SYSTEM                             1                      1
ROIDOCPRMS*                    SLOGSYS                                1                      1
ROOSGEN*                       RLOGSYS                                0                      0
                               SLOGSYS                                1                    201
ROOSPRMSC*                     RLOGSYS                                0                      0
                               SLOGSYS                                1                      3
ROOSPRMSF*                     RLOGSYS                                0                      0
                               SLOGSYS                                1                      4
RSBASIDOC*                     RLOGSYS                                0                      0
                               SLOGSYS                                1                      1
SRRELROLES                     LOGSYS                                 1                  2.040
TBTCO*                         RECLOGSYS                              1                      1
EDIDC                          RCVPRN                                 0                      0
                               SNDPRN                                 1                    780
EDP21                          SNDPRN                                 1                      3
EDPP1                          PARNUM                                 1                      1
T076B                          KONTO                                  1                      1
T076M                          KONTO                                  1                      1
T076S                          KONTO                                  1                      1
I expect that all tables marked with star (client independent tables) have no impact (they would be changed anyway).

Thanks. I got similar response from other SAP experts I've consulted. But I do not understand what are the changed records? If there would be no changed records - I would agree there is no impact. But when I've by accident changed 3x3000 records - it is hard to belive that there is absolutely no impact.
Can you please explain?

Similar Messages

  • In app run if no list generated what are the possible causes

    afetr the app run when i click on execute system showing no list generated.  what r the possible causes?

    Hi
    1.  no due date open items are not availabe for that vendor.
    2.  please check the vendor master.  payment method are defind or not.
    then you will run the APP cycle.
    Regards
    Ram

  • What is the best spec to run multiple programs with photographs?  Includes:  Lightroom, PhotoMechanic, and Internet DAM system?

    What is the best spec to run multiple programs with numerous photographs?  Includes:  Lightroom, PhotoMechanic, and Internet DAM system?
    For a Macbook Pro.  What's the least amount I need to process, upload, download images using these 3 programs?
    Thank you.
    pt

    That's a nice system Kevin, and it will work very nicely with Photoshop.  I do take it that you have 16Gb RAM in Total?
    250Gb SSD is a good size, but you can still run short, and that will affect Windows performance.  When you get your system, instal WinDirStat which gives you a graphic display of everything on your drive, like below. Clicking on any of the large areas will tell you what and where they are, so you can think about moving cache folders etc. to one of the HDDs.
    Leave the Pagefile.sys on the boot drive.  Think about disabling Hyphenate as it takes a ton of space, and too often crashes on wake up.
    My Documents
    Desktop
    Downloads
    Look at Bridge cache
    iTunes backup
    Other stuff like that.
    Think about another 500Gb drive just for Photoshop Scratch.  Drives are cheap as chips nowadays
    Do yourself a favour, and invest $100 in Shadow Protect (or similar if there is such a thing) SP saves incremental backups every 15 minutes (you can set the interval, but it has no impact on performance with a system like yours).  If you have a problem you can mount the back up at any of those 15 minute points, and open files from it.  You can also make a bootable DVD image of your C drive, and be back up and running five minutes after disaster strikes.
    Optimize Performance in Photoshop
    Photoshop CC and CC 2014 GPU FAQ
    For more ideas, swing by the Premiere Pro Hardware forum.  Those guys are serious good at this stuff, and you'll find links tips and ideas.
    Happy computing, and have fun with your Creative Cloud® apps.

  • Orphan Essbase processes - What are the possible causes

    We are running Essbase 11.1.1.1.00 on AIX and have encountered numerous orphaned processes. IE.
    hypadm 753666 975046 0 Dec 16 - 487:34 /appl/hyp/hyperion/products/Essbase/EssbaseServer/bin/ESSSVR Periodic xxxxxx NOCREATE 10000 65535 "" 1 1 1927282691 NODEBUG 1 109 116 2 English_UnitedStates.Latin1@Binary
    hypadm 975046 1 0 Dec 15 - 2:53 /appl/hyp/hyperion/products/Essbase/EssbaseServer/bin/ESSBASE ** -secure
    We have to manually kill these processes or the cause problem with the logs and performance.
    What are the possible causes? Has anyone else experiences similar issues?
    Thanks

    We had a similiar problem on UNIX. It was due to a process clean up script that was running as part of scheduled server maintenance. For some reason it would kill the Essbase server process and leave us with the orphaned child processes.
    Once we figured that out the script was adjusted to ignore all Essbase processes.
    Your example - I may be reading it wrong but it does not appear to be orphaned.

  • My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

    My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

    Hello Douglas,
    Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro.  I recommend the following steps for this issue:
    Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
    You can find the full article here:
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • What is the best practice for running a long report/query against an active database?

    We are using SQL Server 2012 EE but currently do not have the option to run queries on a R/O mirror though that is my long term goal. I am concerned I may still run into the below issue in that scenario as well since the mirror would also be updating data I
    am querying.
    I have a view that joins across several tables from two databases and is used by an invoicing program on existing data. Three of these tables are also actively updated by ongoing transactions. Running a report that used this view did not use to be a problem
    but now our database is getting larger and we have run into some timeout problems for the live transactions coming in.
    First the report query was timing out so I set command timeout to 0 and reran the query which pegged all 4 CPUs 100% for 90 minutes and so I finally killed it. Strangely there were no problems with active transactions during that time so I'm wondering if the
    query was really running doing anything useful or somehow spinning and waiting. I reviewed the view and found a field I was joining on that was not indexed so created an index on that field, reran the report, which then finished in three minutes and all the
    CPUs were busy but not at all pegged out. Same data queried both times. I figured problem solved. Of course later, my boss ran a similar invoice report, with the same amount of data, and our live transactions started timing out 100% while his query was running.
    I did not get a chance to see the CPU usage during that time.
    I looked at the execution plan of the underlying view and added the suggested index but that did not help. When I run the just the view at SQL Server it does not seem to cause any problems and finished in a couple seconds. Perhaps something else going on in
    the reporting tool using the view.
    My main question is - Given I have to use the live and active database, what is the proper way to run a long R/O query/report so that active transactions can still continue to update
    tables that I am querying? sp_who2 did show transactions being blocked so I guess a long query accessing the tables blocks live transactions accessing those same tables, but certainly I'm not the only one doing this. I
    am considering adding "with (nolock)" but am hoping there is a better standard practice as that clause can return dirty data and I understand why. Thx, Dave
    Thanks, Dave
    Dave

    Hello
    You can change the DB isolation level to Read uncommitted
    http://technet.microsoft.com/en-us/library/ms378149(v=sql.110).aspx
    or use WITH (NOLOCK)
    I do use NOLOCK option for the dirty reads to avoid locks on the tables
    Javier Villegas |
    @javier_vill | http://sql-javier-villegas.blogspot.com/
    Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you

  • What are the possible values for the JOB status?

    What are the possible values for the JOB status in the table TBTCP and significance for each?

    Hi,
    Have a look at include LBTCHDEF.
    The standard include from SAP.
    -> Definitions and Constants for Function group BTCH
    Kind Regards
    Raymond

  • What's the right way to run a consolidation in HFM from FDM?

    New to FDM. Things are working ok, but wondering what's the best way to run a consolidation in HFM after loading.

    You need to create a validation entity.
    On the validation entity, make sure you click the Consolidate check box. Then in integration settings, click Enable Consolidation. You need to also turn on the Force Calculate option. If this is a multicurrency app and you want translation to run, also enable the Force Translate option of the adaptor.

  • What is the best way to run Sage on a MacBook Pro?

    What is the best way to run Sage on a MacBook Pro?  I am a first time Apple user.

    There's a lot of Sage out thete so fill us in with information. If it runs on Windows then you'll need to create a partition on your mbp using boot camp and install Windows. So what is Sage for you?

  • I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?

    I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
    I typed in the IPv6 address of the printer in the address feild of firefox.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    * "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • What is the highest Java version running with SOA Suite v10.1.3.3 ?

    What is the highest Java version running with SOA Suite v10.1.3.3 ?
    From my point of view at least v1.4.1
    Maybe v1.5
    but not v1.6
    Is this true?
    Peter

    I guess only 1.5.
    1.6 is officially not supported and 1.4 does break stuff, I tried running it with it, and didn't even come up.
    Regards,
    Chintan

  • The web developer toolbar wont load on my computer, what are the possible solutions?

    when i click to download the toolbar now, firefox refreshes as it should be nothing happens.
    maybe i dont see the toolbar? i cant find it.
    what are the possible reasons its not downloading and what can i do?

    Hey lydiabat10,
    Thanks for using Apple Support Communities.
    Looks like the iPhone won't allow explicit content on it. One thing you may want to look at is the Restrictions.
    iOS: Understanding Restrictions (parental controls)
    http://support.apple.com/kb/HT4213
    Have a nice day,
    Mario

  • My macbook is getting hot pretty quickly. What are the possible causes?  How can I tell if it is mechanical vs. dust?

    My Macbook Pro is getting hot pretty quickly. What are the possible causes?  I have had the machine about 3 years.

    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Install iStat Menus 4.05 to provide actual temperature readings and fan speeds.

  • What is the best way to run windows on my Mac? And What are the pitfalls I should watch for?

    What is the best way to run windows on my Mac?   What are the pitfalls/

    If you need Windows as your main operating system you would be better off buying a Real Windows PC.
    Running windows on a Mac is always a compromise. Whether in a Boot Camp partition or in a Virtual Machine.
    In boot camp you can't easily Re-Partition and or Re-Size the drive it is installed on. You can't use both graphics cards as Apple has limited Windows to use the discrete graphics only, that is if your mac has 2 graphics cards (15" MBPs), which will shorten the battery run time in Windows.
    The trackpad only has limited functions in Windows, less then is available on the Mac side and a real Windows PC.

  • What are the tables impacted when we done the migo

    hi,
    what are the tables impacted when we done the migo.

    The tables invoved are :-
    MARD -   Storage Location Data for Material
    MARC - Plant Data for Material
    MSEG - Document Segment: Material
    MBEW - Material Valuation
    MKPF - Headr : Material Document
    EKBE - History per Purchasing Document
    EBEW - Sales Order Stock Valuation
    Edited by: Briesh Patel on Apr 22, 2008 4:42 PM

Maybe you are looking for