What is the possible output format for a BAPI ?

Can anybody tell me what is the possible output format of a BAPI.
What happens when a BAPI excecutes ?
thanks

Hi,
All the output message/feedback about a trasaction are stored in the RETURN parameter table .
You can read that RETURN internal table using "format message" or "Read_Text" Fucntion modules.
Thanks
Dany

Similar Messages

What is the best output format for idvd

Am I better publishing to media browser and choosing "large," or is it better to export to Quicktime, and if so, what is the highest quality to choose for going to iDVD. This will be a presentation on a very large screen. Thanks.

The answer is: it depends. It depends on the resolution and format of the clips in your project, your aspect ratio (normal vs. widescreen), etc.
You want to try to keep the number of conversion steps at a minimum. I.e. using 640x480 source material in an iMovie '08 project, sharing as Large at 720x540 from iMovie '08 only to have it converted to 720x480 in iDVD isn't optimal as you end up with two resolution conversion steps.
Why don't you experiment with a short sample clip and a DVD-RW? Use a DVD player and a television to judge the results, not the software DVD player on your Mac.

When creating a new project, what is the best output format for TV?

I'm watching my iMovie creations on an LCD TV with 1080p. When I playback the mp4 format it always kinda looks worse than the original content.

I totally agree. The only way I have found to get good HD quality is to first output the edited camcorder file BACK to the camcorder. Then play that on your HD TV and you get real HD. Unfortunately you cannot do this with the newer versions of IMovie. Maybe there is another way but i can't find it.

What's the best output format to burn a dvd with?

what's the best output format to burn a dvd with? I normally select a h264, but i don't know which preset i should use (between "match source high bitrate and hd1080...)

A DVD is Standard Definition... export using the MPEG2-DVD preset and import the TWO (audio and video) files in Encore for authoring
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173

What are the possible cost objects for raw material consumption postings

what are the possible cost objects for raw material consumption postings. i want to know whether it can be work order(maintenance order).

For example, you are confirming a process order and issuing raw materials to the process order, the system in the background creates the consumption posting and will by default use the process order as a cost object.
Similarly, when you are issuing materials to a work order, you will use MB1A and with movement type 261 and the system prompts you to enter the order number. If you are using movement type 201, then the system prompts you to enter the cost center and so on.
Thanks,
Madhav Nanduri

For iPhone and Android, what is the best file format for watching videos?

For iPhone and Android, what is the best file format for watching videos?

You can try these setting. They are from CS5.5 but should work in CS4.
Make sure you check Use Max. Render Quality.

What is the default file format for saving in MS Office 2013? Is it still the transitional OOXML or the ISO/IEC 29500 strict format?

As I have read, MS Office 2013 is able to read and write the ISO/IEC 29500 strict (standardized Office Open XML) file format. MS Office 2010 was only able to read the strict format and MS Office 2007 could neither read nor write the strict format. The
.docx, .xlsx and .pptx saved by Office 2007 and 2010 were only complying to the OOXML transitional, as far as I understood.
My main question is what the default file format for saving in MS Office 2013 actually is? Is it still the transitional OOXML or the ISO/IEC 29500 strict format?
In case, MS Office still saves in the transitional standard by default, is it possible to set the strict standard in the settings? Is this recommended (I assume that OOXML strict is the future) to do this?
Thanks.

Yes, the Transitional is still the default file format for saving in Office 2013, and we can modify this setting in Word Options, Save:
As Alex Brown covers in his
blog post, "Transitional is intended to preserve the fidelity of existing binary documents being migrated to ISO/IEC 29500, and includes many legacy features for compatibility with existing documents. Strict is a subset of Transitional that does not
include legacy features – this makes it theoretically easier for a new implementer to support (since it has a smaller technical footprint, so to speak), but also makes it less able to preserve the fidelity of existing documents."
Max Meng
TechNet Community Support

What is the best file format for photos?

Greetings.
I am going to be importing some photos into FCE 3.5.1 to do some effects and motion. What is the prefered file format form Photoshop for FCE? TIFF, JPEG, and PS format all import, but I'm just wondering if one is prefered over the other.
My images will be pretty big, 3000 pxels x xxx at 72dpi, so I can move in and out, and maybe pan.
Thanks.
Jonathan

PNG, PSD. Don't make the image larger than you need to.

What is the best video format for 50+ year movie storage?

Objective: In what video format should I store my family movies on an external drive? I want these family movies to be viewable by future generations in 50 - 70 years, so what video format / type is recommended?
Background: I have an iMac, OS X 10.7.5. I use IMovie '11, version 9.0.8. My iMac has an internal DVD player and burner and iDVD is installed.
I have dozens of family movies (total 80+ hours) dating back nearly 70 years. All these films have been digitized and I have imported many of them into iMove as events, then I edit them with title pages, transitions, music, etc. When a "project" is completed (Between 1.5 - 2.0 hours or less) I share the project to iDVD where I burn it to a DVD. Within iMovie I save each of these projects (on the internal Mac HD, which consumes very little space) and on an external drive I save for each project:
- a disc image (DVD.img) whose size is about 4.5 GB
- a copy of the iMovie project, whose size is about 60 MB (the original project is in iMovie, in the Mac internal drive)
- the original digitized raw movies imported into iMovie as events and are formatted as .mov (these are large size at 8 GB - 20 GB each)
- the finalized and fully edited iDVD which is formatted as DVD.dvdproj (these are very large size at 20 - 24 GB each)
As you can see with all these disc images, projects, events and DVD projects stored on my external drive I am at nearly 1 TB of storage, on my way to 1.75 before I comple editing all movies.
While I manage pretty well the editing my movies within iMovie, and how to create an iDVD project and then burn a DVD, I have no understanding of the technical aspects of the multitude of different movie formats in the market nor of Quick Time and its format.
I am told that DVDs will only last 10 - 15 years and then begin to deteriorate. And iMovie '11 won't be arond 50 years from now. Nor will the current / recent versions of iDVD. Thus, for posterity:
1. In what format should I store my family movies on an external drive so they can be viewed by family members 50 - 70 years from now? (best chance for viewing, since we don't know what formats they will have then)
2. How do I convert from what I have (disc image, iMovie project, DVD project) to your recommended format?
Thank you,
HDP

There is no such format for movies or even Photographs. Frankly we can't guarantee the persistence of any format past the next 10 years, not to mind 50 - 70.
Codecs are being improved and created all the time, and this process will continue. In 50 years time we may still have .mov and .avi files, but the codecs that create the movies within will have changed.
One thing is reasonably sure: DVD will be as deader than floppy disks are now. Ditto Blue Ray. They're on the way out now, and in 10 years they'll be curiosities.
So, what's the solution:
Best I can suggest is to keep your movies on volatile media like Hard Disks (with back ups on other disks, or course). Progress will be evolutionary - as new formats come along there will be the option to migrate older data to these newer formats, and that's the trick. As always, when it comes to migration, the more data available the better the likely result, so keeping your movies in the least compressed versions possible seems a good approach.
That and a dollar will get you a cup of coffee someplaces, but nowhere fashionable.
Regards
TD

What is the best file format for importing photos into Imovie?

What is the best format to save photos in before bringing into Imovie? What is the best resolution for them and what is the best size? These will eventually be ported over to IDVD. It seems that as jpgs Imovie didn't recognize them, but as psds it did.
Dick

hi Richard:
Just a personal preference, but if I intend on using the photos for printing I keep them in the PSD form. When adding to imovie, however, I use .pict
Sue

What is the best video format for importing into After Effects CS5

Please look at this video, work in progress.
http://www.youtube.com/watch?v=49_wbdKALQk
The opening, featuring a ribbon of videos, was created in After Effects, using Digieffects Freeform.
The issue is the poor quality of the videos that are featured in the opening -- compared to the higher quality of videos from the original Premiere project., which you can see at the end of the clip.
To create the After Effects project, I exported a series of video clips from Premiere to mp4.
Then I imported them into AfterEffects.
The bottom line, and the purpose of this question, is I am thinking that MP4 was not the best choice for the Adobe Premiere export.
What is the best format to export video from in Premiere Pro CS5 to import into after effects, or to import into any other editing program, incuding importing right back into Adobe Premiere, if that is eever needed.
AVI?
MOV
MP4
And any other settings that will result with the highest qualiity videos for importing.
Thanks

To follow on with Wade's suggestion...
There are lots of ways to get movies and projects and other things back and forth between After Effects and Premiere Pro. This page outlines them:
"Working with Premiere Pro and After Effects"
If you must render and export a movie out of one application to bring it into another, there is a very basic piece of video workflow advice that you need to keep in mind (which applies to _all_ video software, not just After Effects and Premiere Pro):
If you're creating a movie to be used in the next step of a post-production pipeline, you _never_ want to use a format that does lossy compression. You either use no compression or (preferable) lossless compression. Examples of codecs that provide lossless compression are the Animation codec and PNG codec at the highest quality settings; these can be used in a QuickTime container, for example. Never compress a movie with lossy compression except at the very end of your pipeline, when you're creating the final movie for distribution.
MP4 (MPEG-4) is a lossy codec. The quality loss is acceptable for the last stage in the pipeline, but it's not acceptable for an intermediate file.
It seems that you would benefit from reading this and and working your way through this.

What is the BEST file format for editing HD in CS5?

We are building a remote production truck and it will be tapeless with all hard disk video recording. We have not decided on what brand of disk based recording system we are getting.
I am looking for opinions of what the most ideal file format to capture in HD for editing in CS5? What is the highest quality yet fastest and most efficient for editing basic 1080i30 or 1080p30 video for broadcast?
There are so many devices that capture quicktime but quicktime is crippled to 32bit in windows and we want to avoid it.
thanks!

I'm sorry i guess i didn't mean to confuse you with the word "capture" in that question. there are
tons of hard disk based recording systems out there that "capture" our video to a disk into a file we can import into premiere and edit.
This will be a live production truck, video will come out of our production switcher SDI into some companies recording device which will have a plethora of codec choices to record with. We want to choose a product that will give us files that will work best in premiere CS5 with gtx460 gfx cards and matrox axio le hardware. Just wanted to see if anyone who has edited various codecs has noticed if any seem to work faster and better then others.
there are many companies we are looking at that make such disk based recorders including nnovia,aja,panasonic/p2, fast forward, etc...
i want to avoid quicktime and am more interested in mpeg4, or mpeg4 part10 (h264), or p2, omf, mxf are possibilities, any opinions?

What's the best export format for television from FCE?

Hi,
I'm working in HD in FCE and need to export a short (40-sec) clip for the local cable station. To get the highest quality, I exported as a QuickTime Movie (self-contained), and burned a CD copy of the file and hand delivered it to them. Unfortunately, they couldn't open it (they said there were codec problems). So, I need to do it differently. I've been experimenting, and thus far it seems best if I do this:
Export to QuickTime Conversion
Settings: QuickTime Movie, compress with MPEG-4 Video, keyframe rate = 24, bitrate = 5000 kbps, dimensions 1280x720.
The result is "okay", but that's all. Anyone have any suggestions as to how I can get a television-quality clip out of FCE (using QuickTime Conversion)?
Thanks!
Vic

I should've been a little more detailed...
The cable station broadcasts ads for real estate agents. Hence, they use mostly still images. Lately, they are getting a little more into full-motion video. The two guys that run that division are not exactly video savvy. For that matter, neither am I. I do videos for the web (real estate videos). I want to promote my service to other agents, so would like to show some short sample clips on TV to attract attention and draw new business. Previously, I e-mailed Flash video to the cable station and it worked fairly well; but, as you can imagine it was far from television quality (it was jittery and pixelated). They tell me that they use MPEG-2 format to broadcast their video clips. FCE won't allow me to export that format. They tell me that, if I bring them some other format, they can convert. As I mentioned, I burned QuickTime format clips (about a half gig each) to a CD and brought those to them. They were unable to open the files. Now, I'm lost. I'm wondering if there's a format I can output from FCE that will be of high enough quality. The guys at the cable station suggested .avi, but isn't that a web format?
Any output formats/parameters you can think of that might work for me?
Thanks very much!
Vic

What is the best file format for PC (Windows7 64bit) and Mac OSX 9.2.1?

My external hard drive containing files from my PC (Windows 7, 64 bit), says the files are READ ONLY. I'm trying to work of files on my Macbook Pro (OSX, 10.9.2). If I have to reformat the drive, what is the best format that will work for both systems?
Any help will be greatly appreciated.

The Tuxera NTFS for mac seems to have fixed the issue.
My question now is, Will reformatting to ExFatbe better or quicker?
Thank you to AL of you for your help!

What is the CSH call format for AIRHelp BROWSER format?

I have read for the AirHelp application help. What is the AIRHelp Browswer call format? Is it the same as the webhelp or flashelp? Pro version?
Thank you.
JC

Speaking from experience (and Jeff can attest to this as he has replied to one of my own queries on this site), Peter Grainge's site and some of the other seemingly Adobe-funded sites say that calling context-sensitive help through Air Browser Based Help is the same as when calling WebHelp, but I'm not sure it's that simple.
I've had limited success in using the existing WebHelp API that comes out of the box with RH9.
From my experience so far, you will be able to:
Launch a specific page of your Air Browser Help using context-sensitivity.
But, using the newwnd=false option will not work if you prefer to launch the help in your main browser window rather than a popup.
Hopefully Adobe is working on this as we speak.

What is the possible output format for a BAPI ?

Similar Messages

Maybe you are looking for