What is the power cord for the airport extreme (A1354)?

What power cord and/or adapter is used for the 2nd and 3rd generation Airport Extremes?

My TC cable has 300v printed along it (just about read if the angle to the light is OK).
Also 120v @ 2.5 amps is roughly 240v @ 1.25 amps, so current draw is less on the higher voltage.
Should be fine, as long as the correct fuses are used in the plug. Which is there to protect the cable from wall socket to appliance and not the appliance itself.

Similar Messages

  • What is voltage power block at Apple Airport Extreme?

    What is voltage power block at Apple Airport Extreme? 110 or 220 Volt. Or both type support.

    The AirPort Extreme will operate on 100-240 Volts and 50-60 Hz, so it will work just about anywhere in the world if you have the right adapter for the wall jack.
    The outboard power supply provides 12 Volts to the AirPort Extreme at about 2 Amps.

  • I can't find an ac power adaptor for my AirPort Extreme base station.

    I was given an AirPort Extreme base station, the square model, I just need an ac power adaptor. I can't seem to find one that will definitely fit. Help please?

    It is easier and better to give the model number from the base.. A1143 is the oldest Airport Extreme that is N wireless.
    http://en.wikipedia.org/wiki/AirPort_Extreme
    All the models from Gen1 to Gen5 use the same power supply.. 12v 1.8A
    But it can be replaced with any standard 12v supply.. of sufficient current rating.
    The real thing is expensive. It still doesn't have the Apple cord.
    http://www.ebay.com.au/itm/New-Genuine-A1202-12V-1-8A-Power-Supply-AC-ADAPTER-fo r-Apple-Airport-Base-/290923848575?pt=US_Power_Supplies&hash=item43bc69a37f&_uhb =1
    Buy a power supply rated at 12v 3a 4a or 5a .. any of those ratings will work well.
    I generally buy 4a or 5a. as they tend to be a bit better. Although if you check they all seem identical to each other..
    Check in your local market if you want one fast.. just do ebay search for 12v 4a power supply..
    http://www.ebay.com/itm/I-MAG-Electronics-IM120EU-400D-Genuine-OEM-12V-4A-AC-Pow er-Supply-Adapter-/380641968538?pt=Laptop_Adapters_Chargers&hash=item58a007819a
    Power cord is probably a standard IEC computer cable.
    Cheaper from HK but if you want reasonable quality pay around $10US.. cheaper can be rubbish.

  • Where can you get the power cord for a 2012 airport express?

    Where can you get a power cord for a 2012 airport express or the equivalent? I couldn't find one in the online store.

    I'm sure the OP found his solution, but I wanted to share mine in case it helps some future seeker.
    There are a lot of brand new cords on eBay for less than $10 including shipping, which is way cheaper than the $39 stereo connector kit or an AC adapter from a retailer.  I just bought a used-like-new one for $5.50.
    The cord is made by Volex, part number APC7Q.  The Apple part number is M9573LL/A.  If the seller got it from the stereo adapter kit, they'll probably list it under MD836LL/A, which is the kit's part number.  I got the best search results on eBay using just the Volex part number.
    Best of luck!

  • I purchased an airport Extreme from germany. I would like to know if I can use it in the USA, and would I need anything else apart from a new power cord for the same ?

    I purchased an Airport extreme from Germany to be used as a router. It worked very well over there and I plan to use it in the States. Now, since the power output is different in both USA and Germany, would I only need to buy a new power cord from USA ?

    The AirPort Extreme will run on 100-240 Volts and 50/60 Hz, so it will operate just about anywhere in the world as far as power goes, if you have the right power cord or AC wall adapter. A voltage converter is not needed.
    But, European wireless standards are different than the U.S., so you will need to avoid using Channels 12 and 13, which are not authorized for use in the U.S. Otherwise, things should operate OK.
    For all the details on wireless standards in different parts of the world, see this document:
    http://en.wikipedia.org/wiki/List_of_WLAN_channels

  • HT201897 Does a Mac Mini purchased in the USA require a power converter for operation in Europe or should I only purchase a different power cord for it?

    Does a Mac Mini purchased in the USA require a power converter to operate outside of the USA or can I simply purchase a different power cord for it?

    Depending on which European country (should their mains access plug/port shape vary) the
    cord set with correct ends on it has to match. You can buy a cord that plugs into the Mini
    where the factory cord goes, and the other end has one for the wall source shape. The wire
    for the application should be able to support 110~240VAC.
    With the cord or an accurate image in hand, you could either get a new cable to match both
    realities (mini + wall supply mains local) or an adapter (US/Standard to EU/Local) for just
    the head or input part of the original Apple cable. One plugs into the other, then into wall.
    If you have a new Mini with a small modular plug/port on the computer end of the power wire,
    it would have only two holes and no ground; the other end would have two prongs of equal
    shape and size. Not a polarized plug and not a grounded three-prong. To get a replacement
    power wire for the MINI to go from power source to the Mini is recommended, if you are going
    to be staying in one location for awhile. A Travel Kit that offers no electrical conversion but only
    the physical shape adapter kit, should a available in travel stores, airports; big box discount
    stores, computer and electronic stores. This page shows the cord end of the appliance shapes.
    The other end would be the mains shape for whichever country you are going to....
    http://www.signalandpower.com/European-Power-Cords/
    So to match the country or regional power mains type is a primary concern for obtaining the
    correct replacement cord to supply the Mini with local mains power. The end which plugs into
    the Mini is of a certain type (numbers for EU and elsewhere are published, see link + images)
    & the end that gets plugged into the mains or utility side, needs to match the local specification.
    The link to Apple, to contact for Support and Service information in prior post, should be able
    to help find a source for the local replacement type cord they'd sell local people with a Mini.
    Apple local sources offer replacements for this purpose; and for travelers, a second cord for
    a direct use (not adapter plugs) is a better bet. For those who only need a cord in two places.
    If you are traveling to Denmark, UK, Swiss or other EU countries require different adapters.
    Even places where the power itself may be somewhat similar. However your MINI has an
    automatic power supply that will conform to that energy standard, you only need to supply a
    correct non-transforming adapter. Simply a connection to adapt one shape to another.
    The general purpose travel kit that is not specialized to Apple power adapters, would have a
    plastic plug/adapter with the local pins on one side, and the US/standard two slots on the other.
    So, no circuitry nor any other change of electrical power inside this device would be required.
    http://www.signalandpower.com/2-Prong-Plug-Adapters/
    http://www.signalandpower.com/Convert-to-Europe-CEE-716-plug/
    http://www.signalandpower.com/Swiss-AC-Power-Cords/
    In other words, I believe my other post already covered this. On the ground on either end of the
    path, adapters are common and the Mini does not use proprietary electrical components IF you
    have one of the more recent shape aluminum models with the power supply built in. The older
    Mini has the power brick and two wires. A US/Standard plug adapter to EU/Local would work in
    either case, since all you'd do is plug the adapter plug into the local mains and the US plug into
    that one... I see these kinds of discards for as little as 25¢ in thrift stores in Alaska. Or you can
    buy a new one. Or you could get a complete cord with correct ends on it, for Mini + local mains.
    Hopefully this helps somewhat. The only info missing is which EU country or region is involved.
    Their shapes of plug are different, so the adapter end for local supply has to match their standard.
    Swiss, Denmark, UK, and others offer different shapes and so on.
    The Apple store in the location you are traveling should be able to supply you with a replacement
    cable for a modern MINI, that has the correct local mains end, and the correct Apple mini end on
    the opposite. Since the unit is automatically switching, the magic is done.
    Since I supplied a means to locate any number of Apple stores, authorized service providers &
    other Apple related vendors in my earlier reply: https://locate.apple.com/country you could contact
    any of them along your route in the City in whichever EU country, to find a local MINI power cable.
    In any event, I'm done...
    Good luck and happy trails...

  • Lost the power cord for time capsule!

    So I've lost the power cord for my time capsule. I went to an Apple store and they don't sell them but the employee said that it is a standard cord and I should be able to pick one up at a Radio Shack or the like? Has anybody else had to do this? I can't find the specs on the time capsule either of exactly what type of cord is needed.

    who ever told you that has Model: 61-2876 | Catalog #: 61-2876 cord in mind. I'm not sure if it will work...it looks close....are you saying you were told you can't order a replacement cord from Apple?

  • I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    Are you in the US? Order one from here:  http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
    Or check out Best Buy.

  • What is the username and password for the airport extreme router

    I just switched from a wired router to an airport extreme and im trying to access the router information by typing in my router into the search bar of safari, when I used my old router the username and password was admin, admin. but this isnt the case with the airport extreme, does anyone know what the username and password combination is for airport extreme?

    Unlike routers from most other manufacturers, Apple's Airport devices cannot be configured using a web browser pointed to the IP address of the Base Station. Any manual configuration of the Airport Base Station must be done using the Airport Admin Utility provided by Apple.
    FYI, when using the Airport Admin Utility the default password for the Airport Base Station is the word "public".

  • What is the proper config for the Airport Extreme when a Voice over IP device is between the cable modem and the router.

    What is the proper config for the Airport Extreme when a Voice over IP device is between the cable modem and the router.  Its a VoIPo device. The cable modem is connected to the VoIP WAN port and the LAN port on the device feeds the Airport Extreme.  The VOIP is working fine, and my Mac are getting 10. addresses from the Airport Extreme.  But I do get confict messages and lose my connection periodicaly.  Looking for help.

    Its a VoIPo device.
    Per chance, is this device the Grandstream HT502?

  • I went to the apple store to get a power cord for my husband's mac pro and the technician gave me a power adapter instead. My husband has a conference call before the stores open and I can exchange the adapter but he needs power for his computer before th

    My husband needs a new power cord for his Mac Pro. I went to the apple store and the clerk gave me a power adapter by mistake. He has a conference call before the store opens and I can't get him another power cord. Is there a way to power up his computer?

    You posted in the MacBookPro forum. Is this a Mac Pro or MacBook Pro? If it's the latter, it has a battery.

  • What is the AC classification (1200 - 3200) for the AirPort Extreme?

    WHat is the AC classification (1200 - 3200) for the AirPort Extreme?

    Not sure that I understand your question.
    The AirPort Extreme does not support AC3200 if that is what you are asking.
    1300 Mbps is the theoretical maximum speed of an "ac" wireless connection on the AirPorts.

  • I need to purchase a power cord for my intel based 27" iMac.  I have had it for almost 2 years, I don't have apple care and I don't want to take it in to the genius bar. I know it's the power cord and I just want to purchase one.

    I need to purchase a power cord for my intel based 27" iMac.  I have had it for almost 2 years, I don't have apple care and I don't want to take it in to the genius bar. I know it's the power cord and I just want to purchase one.

    iMacs take generic power cords. If it fits into the back of the iMac and an electrical socket, it'll work.
    Good luck.
    Dr. C.

  • I just bought a new iMac 27'' a week ago and been having problems every morning when i come to the office with turing the system on.  I have to unplug the power cord for 10 secs and replug for it to turn on.  Kindly pls advise

    I just bought a new iMac 27'' a week ago and been having problems every morning when i come to the office with turing the system on.  I have to unplug the power cord for 10 secs and replug for it to turn on.  Kindly pls advise
    Anyone having the same problem?

    Makes no difference if anyone is having the same problem.  The important thing is that it's happening to YOU!
    You have 14 days to return the computer w/no questions asked. 
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.

  • HT4600 i Get a solid amber light sometimes, bUT all works fine. I have to unplug the airport extreme to reset it and then it turns green and starys that way for a week or so and then turns back to amber. why is this and how do i fix it ?

    I gat a solid amber light once a week on my airport extreme, but all works fine. I have to unplug it to reset it and then the light turns back to green and it is good for another week and then it happens again. why is this and what can i do to fix it ?

    Solid amber on an AirPort Extreme is an indication that the internal power supply is starting to act up.
    If the AirPort Extreme is in warranty, it shouid be exchanged for another AirPort Extreme.
    If the AirPort Extreme is several years old, keep any eye on things. When/if you find that you are having to reset the device several times a week, it's time to start thinking about a replacement device, as the end is near.

Maybe you are looking for

  • How do i use a app on both?

    i want to use my mac and iPhone 6 plus to where.if i am in my email i can go from my mac to my phone where i left off just like they advertise. thank in advance and please tell me step by step process

  • Hyperion IR 9.3.1.3:  Spaces in Column Names

    I have a table that has column names that have spaces. Hyperion IR 9.3.1.3 Studio can query this fine, but IR Web Client can't. In Studio, the query log shows the column names surrounded by quotes, but the Web Client won't even show me the query in t

  • How to remove a character in a file??

    I'm not getting how to remove a character from a file.Could anyone post a method to do this?Any help would be appreciable.

  • Acquiring videos from 4/8-Ch DVR

    Hi, I am now using a 4/8 Ch DVR which is connected to a set of cameras. I am using this for the visual inspection purposes now I am displaying these set of cameras through my desktop. I have to show the vedio output from my cameras through LabVIEW .

  • Signing jar files - did what I was supposed to but still

    Hi all, I signed 1 jar file that has 1 class which creates a file on c:\ I signed it like this: keytool -genkey -keystore myKeystore -alias newKey keytool -selfcert -alias newKey -keystore myKeystore jarsigner -keystore myKeystore classes.jar newKey