What is the power spectrum unit for Unevenly Sampled Signal Spectrum.vi if the input signal unit is Volts?

The Unevenly Sampled Signal Spectrum.vi has two outputs, Power Spectrum FFT(X) and Power Spectrum FFT(X) Frequency. Can anyone tell me what's the unit for Power Spectrum FFT(X) if the input signal unit is volts. Also, is this VI equivalent to producing a PSD output?

Hi,
The power spectrum will be in units of Vrms^2 which are power units. There is a very usefull VI that you can use to easily transform the units of your spectrum; the VI is called Spectrum Unit Conversion.vi. You select the type of spectrum that you have and the units that you want it to be converted to.
Here is a good document on spectral measurements in genereal:
frequency spectrum
I hope this helps.
Regards,
Juan Carlos
N.I.

Similar Messages

Cannot find the Power Led connector for JFP1 to connect on K8N Neo FSR

Hi,
I have just bought the MSI K8N Neo FSR (MS 7030) to build a new computer with (amongst others) an Athlon 64 3000 processor and an Enermax 3051 case.
I can't even get a start: if I click on "Power" I just get a red light under the Power button for 1 second and nothing start.
This may be related with the fact that I did not find a "Power LED" connector for JFP1 (I have connected all the others connectors, including the Power LED one for JFP2).
Thank you in advance for your help.
Precisions:
At the beginning, I had forgotten to connect the ATX 12V power connector on JPW1.
After having done that without getting an improvement, I did a Clear CMOS (after having unplug the power cable).
Now the CPU fan begins to turn just when I switch the power on from back of the case (and not from the power button) and stops turning after five seconds.
Sometimes, I get an orange light during 1/2 second on the D-bracket LEDs.

Quote from: Dr Stu on 20-November-05, 04:36:29
evidently if he fixed it, the solution was posted elsewhere
so what have you tried so far? has this system ever worked?
post your PSU specs. try powering up board outside the case in case there is a short somewhere
I have tried a different power unit, different JFP1 configerations, removing and replacing MB battery, changing the jumper settings on JBAT1 to clear CMOS.
Everything is just dead, no power anywhere. I get the fan light inside the Power unit to light up for 1 second when i connect the power cable and thats it. Its a 450 Watt power unit so it should be plenty. Maybe i will try removing the board and starting it that way.
This system has never worked, i just built it.

HT1338 What is the best online storage for photos. Specifically one that allows the original image quality to be downloaded should your hard storage goes belly up

What is the best online storage for photos. Specifically one that allows the original image quality to be downloaded should your hard storage goes belly up

I'd put them on an external hard drive(s) and burn them to a DVD as well (at least 2 - 3 copies on different drives/media); I prefer having control and a local solution instead of relying on a server and the possibility of someone (who shouldn't be) downloading my work.

Can you charge a macbook by any other means than the power cord? For example the usb drive? My cord works fine but the outlet on the laptop is not.

Can you charge a macbook by any other means than the power cord? For example the usb drive? My cord works fine but the outlet on the laptop is not.

The only way to charge a MBP is with a MagSafe power supply (wall or airline) try http://support.apple.com/kb/TS1713

Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!

Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!

Here's the steps to follow if your printer isn't turning on.
If you've gone through all those steps and you still don't have power, there are a lot of places that sell a replacement cord and supply for that printer.
I am an HP employee.

Migrated Aperture 3 upgrade from old Mac Book Pro to new Mac Book Pro. Can't open Aperture on new machine because I don't have the original serial number for Aperture 2 program originally installed on the old machine. What is the best solution to this s

Migrated Aperture 3 upgrade from old Mac Book Pro to new Mac Book Pro. Can't open Aperture on new machine because I don't have the original serial number for Aperture 2 program originally installed on the old machine. What is the best solution to this situation

Call Apple and make a appointment.
You have 3 months of care and up to 3 years with paid AppleCare, let them handle it and bring everything in.
Good Luck

My sister spoiled water into my macbook pro and the power went off in two seconds. I took off the cover and dried the water with tissues. Still it doesnt work. What do i do?

My sister spoiled water into my macbook pro and the power went off in two seconds. I took off the cover and dried the water with tissues. Still it doesnt work. What do i do?

Do you mean when the water was spilled on it, it shut down? That would indicate a major internal short occured.
Really, I'd say you need to take it into Apple or an Apple authorized repair center and get it looked at. Odds are you've got a significantly damaged device that will require professional repair and parts replacement to get working again.

Good afternoon. Product Adobe Muse serial number requests. What to do? I paid for a month, but I work in the trial version. If you can not make out, it will no longer use the services.

Good afternoon. Product Adobe Muse serial number requests. What to do? I paid for a month, but I work in the trial version. If you can not make out, it will no longer use the services.

There are many threads on same topic, please follow the suggestion mentioned here :
https://forums.adobe.com/message/6486790#6486790
Thanks,
Sanjit

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc drive kicks in) unless you hold the power-button down for a long period.

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc-drive kicks in) unless you hold the power-button down for a long period. Help?

Hi a,
Try an SMC Reset: http://support.apple.com/kb/HT3964

DVD+R DL - "failed to calibrate the power level required for this media"

For the first time since owning our MBP (almost a year) I have tried to burn DVD dual layer discs. I get the error message that says the "device failed to calibrate the power level required for this media"
I have searched the web and this discussion forum and see many people have the same situation.
I am simply trying to burn 7GB of data in the finder onto my disc.
I am running 10.5.2, and have tried both Fuji and Memorex discs with no success. I am a little ****** off since the discs aren't cheap...
Do I need to get my DVD burner replaced or is this a software / media issue?
Any help very much appreciated. (& the international settings tweak that worked for some did not work in my case.)

I found the fix to this problem. I tried the trick with changing the languages and it didn't work for me. After hearing the success stories from other people using the language trick I realized that calling apple and getting my superdrive replaced won't do the trick. My superdrive burns CD and 4.7Gb DVD without any problems but when I try to burn DL it shows the message "failed to calibrate". Here's the temporary solution to the problem (it worked for me)
Create a new account
Change the language to something other than English (I speak Russian so Russian worked for me).
I know that it may not work for some of you guys but give it a shot. Hopefully Apple will fix this software bug in the next update.

Macbook pro 2010 only will turn on if i hold the power button down for atleast 7 seconds.....before i could just press it and it would come right on

macbook pro 2010 only will turn on if i hold the power button down for atleast 7 seconds.....before i could just press it and it would come right on

I tried those already, did not work.
I did how ever remove the command key and wiped it down and it turns on perfectly!
but now the keyboard keys seem to be out of place or something. For example it makes a "ping" sound when i hit some of them, when i hit function or control it puts the letter Z.
Any input would be great!

I have a Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power off button. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Any ideas?

I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
<E-mail Edited by Host>

Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Problem "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider for linked server"

hi
i'd like to ask question about linked server.
my linked server used to work but now when i try to select from linked server i was told "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider
for linked server"
but in fact for test connection i was told "the test connection to the linked server succeeded".
could anyone help me? thank u very much
best regards
martin

Hi,
In addition to Tracy's post we have to know those answers as well:
* what provider are you using for the connection
* what do you connect to
for example, if someone try to connect to oracle using sql server provider then several simple queries are going to work probably OK, but once you are trying to use T-SQL or any complex SQL query then the errors are starting.
please post the connection string (without the password!) + the query that you are trying to use.
[Personal Site] [Blog] [Facebook]

HT4859 If I have the app turned off for storage in iCloud does this mean the app can not be downloaded to a new device?

Manage Storage.
1. What am I deleting specifically when this message appears "Are you sure you want to turn off CNN backups and delete the backup data from the cloud?
2. If I have the app turned off for storage in iCloud does this mean the app can not be downloaded to a new device?
3. If I have the app turned off for storage in iCloud and I delete the app off my phone can I download the app again or do I have to repurchase the app?

Every app that you buy or get for free in appstore/itunes belongs to you and can be downloaded on up to 10 devices or saved on up to 5 computers. Instructions to download apps to new devices here
http://support.apple.com/kb/ht2519
Here comes a "BUT" - imagine your kid playing game and getting to level 51 and have to start over from level one. Or imagine that history that you have in your CNN app. That is what icloud backup contains. My 500 scifi books are in one of the app backups and I REALLY do not want to lose it. That is what you would turn off.

Whenever i connect the hdmi cable to the tv and the power cord simultaneously on my MacBook Pro running Mountain Lion, the laptop overheats, i noticed in the activity monitor that Loginwindow was taking up to 80% of the cpu, any solutions?

Whenever i connect the hdmi cable to the tv and the power cord simultaneously on my MacBook Pro running Mountain Lion, the laptop overheats, i noticed in the activity monitor that Loginwindow was taking up to 80% of the cpu, any solutions?

Mac OS X: What is Safe Boot, Safe Mode?
Mac OS X: Starting up in Safe Mode
I have tried installing a disc to try and reinstall the operating system.
Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
If you did manage to reach the desktop after doing any of the above
my battery was dying after a few minutes so I was trying to kill the battery and recharge it to see if I couldn't get it back to a full charge.
Apple/About This Mac/More Info/Hardware/Power/Battery Information - copy and paste the information here. Do not include any serial numbers.
I noticed the computer running slow
How large is your hard drive and how much hard drive space do you have left?
Mac OS X (10.4.3)
Update to 10.4.11 using the combo update or Software Update along with all the other updates that goes along with it.

What is the power spectrum unit for Unevenly Sampled Signal Spectrum.vi if the input signal unit is Volts?

Similar Messages

Maybe you are looking for