What is the preferred dynamic routing over l2l/ipsec?

what is the preferred dynamic routing over l2l/ipsec?
Sent from Cisco Technical Support iPhone App

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Pretty much what you might use if not IPSec.
Do you have some reason why IPSec should have a preferred routing protocol or are you just wondering if there is a preferred routing protocol for IPSec?

Similar Messages

What is the preferred virus scan program for iphone? I believe that I have a virus. My phone will come on by itself and it appears to be recording audio. I have read about spyware/surveilance viruses that will record audio and take photos.

What is the preferred virus scan program for iphone? I believe that I have a virus. My phone will come on by itself and it appears to be recording audio. I have read about spyware/surveilance viruses that will record audio and take photos.

My phone is not jailbroken. I don't know what you mean about hacked. Maybe it is hacked? This is what is happening: About three times over the past few months I've noticed that my phone while "off" will come on (light up) and the screen shows an arrow towards the bottom; an arrow such that you would see on various "players" in order to "play" video or audio, I've searched my phone and cannot find any app that produces this particular screen though. Once I pick up the phone when this screen myseriously appears out of nowhere and press anything, it goes away and goes to the standard "slider" front page to unlock the phone.

What is the preferred way to open a new url in a new window/popup?

Hi Guys,
I have an application that requires me to show another URL (Fedex tracking number) once a button is clicked.
what is the preferred way to do it?
Should I open a new browser or a popup?
I would appreciate if you have a code example I can use.
Thanks,
Itay

hi,
For opening a URL , you could also close previous window and open a new browser.
Follow the steps :
-> make an outbound plug in your window.
-> Add URL of type string as a parameter for your outbound plug.
->Do remember to add Component Name in the Properties Tab of View ( othervs Calling Outbound plug of win from view wont b psbl).
Write the below mentioned code to call a URL in the OnAction of button :
DATA lo_zexit TYPE REF TO ig_zexit .
lo_zexit =   wd_this->get_zexit_ctr( ).
lo_zexit->fire_out_window_plg(
    url =   'http://www.google.com'                            " string
here replace ig_zexit with your ig<applicatin name>.
Other way around is using Code Wizard ( control _ F7).
Write the below code in the onaction of button :
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window         type ref to if_wd_window.lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).CALL METHOD lo_window_manager->CREATE_EXTERNAL_WINDOW
EXPORTING
    URL            = 'http://www.google.co.in/'
    MODAL          = ABAP_FALSE
    HAS_MENUBAR    = ABAP_TRUE
    IS_RESIZABLE   = ABAP_TRUE
    HAS_SCROLLBARS = ABAP_TRUE
    HAS_STATUSBAR = ABAP_TRUE
    HAS_TOOLBAR    = ABAP_TRUE
    HAS_LOCATION   = ABAP_TRUE
RECEIVING
    WINDOW         = lo_window.lo_window->open( ).
You can choose any way whichever suits your requirements.
I hope it helps.
Thanx.

What is the advantages of polymorphism over method overriding?

what is the advantages of polymorphism over method overriding,that means if we are able to to create object at different instances at diff time for that sub class reff variable than what is the need of careating object of super class data type(i.e why always it is necessary to have upcasting for polymorphism?but if we can achive the same output without upcasting).....please tell me..lets have complete discuss..

Seriously though....
WebLogic (for which I have deployed many apps on) as
well as Websphere are both high end Java application
servers, meaning J2EE servers (in short). They allow
one to deploy Enterprise Archive(EAR), a Web
Archive(WAR), or an EJB Archive (in a JR file).
These two servers allow one to deploy EJBs, use
e JNDI, JMS, connectors, and other J2EE technologies
- Tomcat does not. well, EJBs - no
JNDI, yes - http://tomcat.apache.org/tomcat-4.1-doc/jndi-resources-howto.html
JMS - yes (with an implementation, such as ActiveMQ: http://activemq.codehaus.org/Tomcat)
Not sure what you mean by "connectors".
Tomcat provides quite a bit of functionality (but yes, no EJBs)

What is the preferred anti-virus/malware software for MacBook Air

What is the preferred anti-virusmalware software for MacBook Air?

None is required.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

What is the use Business objects over WAD.

Hi Folks,
what is the use Business objects over WAD.
How sap bw is going to use Business Objects.
Thanks,
Cheta.

hi,
A business object is a master record within the Measurement System, and is defined as part of the measurement class within Customizing.
Examples of business objects are wells, well completions, and measurement points.
Once the measurement object is maintained, it is saved with the business object so that when viewed, the measurement object is part of the business object.
regards,
Siddharth.

What is the preferred API (CQ or CRX) to use to access repositories to perform WCM functions?

What is the preferred API (CQ or CRX) to use to access repositories to perform WCM functions like activate, deactivate, import document, export documents, tagging, etc?

As in most cases it is a good choice to use the API with the higher level. For CQ and CRX API, CQ is the highlevel API since it is (partially) based on CRX API. In some cases CQ API eliminates some boilerplate code and/or adds some implicit handling.

What is the best wifi router?

what is the best wifi router? I have a netgear which required that I set my devices with static/manual IPs etc... and yet still losing connection at least once a day. Is airport express my best option to connect both apple and PC devices?

Sorry, but that would be difficult to answer. What is best for you will depend on a number of factors, including: current networking hardware, network environment, your budget, etc.
If you are sure that your current Netgear router is not working for you, I would recommend that you first establish you basic networking requirements. That is, what do you want your network to do? What area do you want for Wi-Fi coverage? What can your current networking clients support, both for radio mode (802.11g, 802.11n, or 802.11ac) and wireless encryption types (WEP, WPA, or WPA2)? Will you be streaming HD video content on your local network, and/or from the Internet? What bandwidth (download/upload) is your ISP providing you?
From there we might be able to make sum recommendations.

HT1384 when charging can you ipod be off. what is the preferred on/off mode when charging

when charging can your ipod be off. What is the preferred on/off mode. when disconnecting - disonnect out of computer first or ipod out of cord?

It doesn't matter where it is powered on or not. See this article for excellent tips on maintaining a healthy battery for your iPod.
http://www.apple.com/batteries/ipods.html
B-rock

What's the difference between Routing and Service Callout in ALSB?

I am puzzled by that.
what's the difference between them.
Or what's the situation should use Routing, and that of service callout?

There is little difference between routing and service callout.
Routing is symbolizes the transition of request thread to a response thread starts. (in OSB every invocation of proxy is undertaken by different request and response threads ). So by this definition, there can be only one route node in a pipeline.
Service call out is also used for similar actions as route node , but in pipeline. So service callout can be either in request pipeline (request thread) or in response pipeline (response thread ) . So in a proxy you can have multiple ServiceCallouts but only one route node.
There are some other slight differences.
Manoj

What are the optimum wifi router settings for ipad mini

My new iPad Mini WiFi access is really slow on my home WiFi network. All my other WiFi devices are working fine. I have a D-Link DIR655 Wireless Router - What are the optimum router setting to ensure compatibility with the iPad?

I'm having the same issue with a TP-LINK router.

HT4522 what is the preferred disk erase mode for Time Capsule

I've been wanting to re-format my Time capsule as I've bought a new Mac Book and currently have 2 backups loaded. Since I've merged data, I wanted to erase and re-use the TC.
Can someone tell me what the preferred disk erase mode is for TC.

Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit
Click the Disks tab at the top of the next window
Click Erase Disk
You will be presented with several Erase options.....Quick Erase, Zero Out, 7 Pass, etc.
Quick Erase will only take a minute or two and be fine for your purpose since you are keeping the Time Capsule.
If you were moving the Time Capsule to another user, the Zero Out option will replace everything on the drive with zeroes. This will take 3-5 hours depending on the size of drive that you have in the Time Capsule.
7 Pass zeros the drive 7 times, etc.
BTW, the Time Capsule drive is formatted in Mac OS Extended (Journaled). This cannot be changed unless you pull the drive from the Time Capsule (voids the warranty), place it in a separate enclosure and use Disk Utility to make the changes that you want.
Then, you have to reinstall the disk back in the Time Capsule.

What is the Preferred RoboHelp Output?

Hi All,
My developer and I have determined that our desktop application cannot use Microsoft HTML Help output since .CHM files cannot be accessed from the network. Therefore, we're struggling to determine if we should use WebHelp or WebHelp Pro instead?
I have searched the robohelp HELP and these forums, but do not see my specific quandry discussed anywhere.
As well, what's Adobe AIR? It seems that this is a free utility, yes? And with WebHelp Pro, it says we need RoboHelp Server... is that an additional cost?!!? We seem to be able to use WebHelp Pro without "Robohelp Server" - so far.
Any insight would be helpful!
- Karen

Hi Karen
CHM will work on a network drive if you modify the Windows registry to mark the location as being safe. This would need to occur in the individual registry for each PC accessing th CHM. So it's likely not optimal.
Certainly you can go the WebHelp Pro route, but if this help system is intended to be installed on server environments at client locations, you would need to purchase a RoboHelp Server license for each client you install on. I'm sure that would make Adobe very happy, as you would need to purchase RoboHelp Server licenses at $2,000 or so each. Not only that, but their IT staff will love you as well because they would then be tasked with installing, configuring and maintaining a new server setup. But, it's an option if you want to go there.
Adobe is hedging their bets a bit on AIRHelp. The whole AIR technology is new on the scene. There is an AIR runtime that each user would need to install as a first step. Then you would need to package your output as AIR and each user would have to install the help on their machines in much the same way as they install applications.
My guess is that the best output type for this would be standard WebHelp.
Hopefully this helps... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

What is the best Wireless Router for ichat

Hi Guys,
I wonder if anyone can give me any advice from all your experience as to the best Wireless Router I should get in order to use ichat with a minimal setup hassle. I have a G5 and iBook both using Mac OS X 10.4.3 with an external ichat camera. I am based in the UK and use AOL UK on a 2meg broadband connection. Is there a router out there that has easy software to configure?
Thanks for your help!!!
Apple G5 and i Book Mac OS X (10.4.3)

I use A Linksys WRK54G which is Pack of the Wireless router and a laptop PCIAM (or what erver the name is ) card.
It give me UPnP, Port Triggering and of course good old Port Forwarding.
It gives me 4 ethernet ports as well as Wireless access.
It will handle PPPoE logins if the modem is in Bridge mode.
I have it set to have a Static Address Modem to Router and it is also not doing DHCP And therefore Static to the computer(s).
I would also look at what speed your Internet conection is likely to rise to in the next few years. Some devices can not handle the speeds offered in some places. So make sure it will handle the Uplink and Download speeds you want as well.
Ralph

What is the difference between router and network name ?

Hi ... I changed the name of my router in the Airport utility and thought that the network would be changed accordingly. What is the differnce between the 2 ?

I changed the name of my router in the Airport utility and thought that the network would be changed accordingly. What is the differnce between the 2 ?
The name of the router would be the "Base Station" or "device" name. It might be something like RL AirPort Extreme
The name of the wireless network (technically called the SSID) is separate matter. It might be something like RL Wireless, for example.
If you can post back to let us know what version of AirPort Utility you are using, we can provide you with the steps to change either the device name or wireless network, or both.
In order to prevent confusion, you should have a separate device name and a separate wireless network name.
If you are not sure which version of AirPort Utility that you have, click on the AirPort Utility menu in the upper left corner of the screen and then click About AirPort Utility to see the version number.

What is the preferred dynamic routing over l2l/ipsec?

Similar Messages

Maybe you are looking for