What is the preferred way to handle ASUnicode data?

The ASUnicode typedef is incompatible with wchar_t but seems to be compatible as far as I can tell. I'm only currently dealing with ASCII-compatible characters but certainly don't want to cause any headaches down the road.
There are only two posts here that have ASUnicode in them and both are just incidental in the presentation of source code. Both posts indicate a similar understanding to mine. PIUActionUtilities.cpp in the samples also implies that they are compatible given the use of casts in that file to LPCWSTR.
So am I fine just using wchar_t throughout my code and casting to ASUnicode when I need to (e.g. when calling the JS scripting interface)? And I can go the other way without issue as well, so all of my returned data can just be dealt with as wchar_t pointers?
Thanks.

Yes, as of now you are safe. We like to be binary compatible so a change to this in the future would probably result in a new API. There are no plans to change any of this.
I would just add a compile check that wchar_t is the same size as ASUnicode. Depending on your compiler the default does change. Adding a sizeof(wchar_t) == sizeof(ASUnicode) check would alert you to the fact that something has changed. And use the routines as much as possible in the suite.

Similar Messages

What is the preferred way to open a new url in a new window/popup?

Hi Guys,
I have an application that requires me to show another URL (Fedex tracking number) once a button is clicked.
what is the preferred way to do it?
Should I open a new browser or a popup?
I would appreciate if you have a code example I can use.
Thanks,
Itay

hi,
For opening a URL , you could also close previous window and open a new browser.
Follow the steps :
-> make an outbound plug in your window.
-> Add URL of type string as a parameter for your outbound plug.
->Do remember to add Component Name in the Properties Tab of View ( othervs Calling Outbound plug of win from view wont b psbl).
Write the below mentioned code to call a URL in the OnAction of button :
DATA lo_zexit TYPE REF TO ig_zexit .
lo_zexit =   wd_this->get_zexit_ctr( ).
lo_zexit->fire_out_window_plg(
    url =   'http://www.google.com'                            " string
here replace ig_zexit with your ig<applicatin name>.
Other way around is using Code Wizard ( control _ F7).
Write the below code in the onaction of button :
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window         type ref to if_wd_window.lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).CALL METHOD lo_window_manager->CREATE_EXTERNAL_WINDOW
EXPORTING
    URL            = 'http://www.google.co.in/'
    MODAL          = ABAP_FALSE
    HAS_MENUBAR    = ABAP_TRUE
    IS_RESIZABLE   = ABAP_TRUE
    HAS_SCROLLBARS = ABAP_TRUE
    HAS_STATUSBAR = ABAP_TRUE
    HAS_TOOLBAR    = ABAP_TRUE
    HAS_LOCATION   = ABAP_TRUE
RECEIVING
    WINDOW         = lo_window.lo_window->open( ).
You can choose any way whichever suits your requirements.
I hope it helps.
Thanx.

What's the best way to handle all my data?

I have a black box system that connects directly to a PC and sends 60 words of data at 10Hz (worse case scenario). The black box continuously transmits these words, which contain a large amount of data that is continuously updated from up to 50 participants (again worst case scenario)
i.e. 60words * 16bits * 10Hz * 50participants = 480Kbps. All of this is via a UDP Ethernet connection.
I have LabVIEW reading the data without any problem. I now want to manipulate this data and then distribute it to other PCs on a network via TCP/IP.
My question is what is the best way of storing my data locally on the interface PC so that I can then have clients request the information they require via TCP/IP. Each message that comes in via the Ethernet will relate to one of the participants, so I need to be able to check if I already have data about that participant - if I do then I can just update it, if I don't I need to create a record for the participant, and if I havn't heard from one for a while I will need to delete it. I don't want to create unnecessary network traffic. I also want to avoid global variables if possible - especially considering that I may have up to 3000 variables to play with.
I'm not after a solution, just some ideas about how to tackle this problem... I thought I could perhaps create a database and have labview update a table with the data, adding a record for each participant. Alternatively is there a better way of storing all the data in memory besides global variables?
Thanks in advance.

Hi russelldav,
one note on your data handling:
When each of the 50 participants send the same 60 "words" you don't need 3000 global variables to store them!
You can reorganize those data into a cluster for each participant, and using an array of cluster to keep all the data in one "block".
You can initialize this array at the start of the program for the max number of participants, no need to (dynamically) add or delete elements from this array...
Edited:
When all "words" have the same representation (I16 ?) you can make a 2D array instead of an array of cluster...
Message Edited by GerdW on 10-26-2007 03:51 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

What's the best way to handle new versions of software?

So we have an Application setup for Adobe Reader (just using Reader as a general example) which is part of our Task Sequence. When Adobe releases a new version of Reader, what's the best way to handle getting the new version into our SCCM setup.
I know I can create a new application and do it all over and select the new file, but can I simply replace the files that the application is pointing to and then somehow tell it to update the DPs with the new files? I'd rather not have to create new
applications every time if I don't have to.
Thanks.

I think continue the way you are doing right now by creating a new application each time there is a version change. Its a clean way to do and this helps with Application life cycle mgmt aswell where you keep track of versions across the environments and
eventually retire an application. Specially where no changes are made without a change control. This is completely process specific and may not be applicable.
i do agree with above posted comments about using supercedence option.
However most of the apps comes with upgrade capabilities from previous versions. So you can upgrade existing version with new one if you do not wish to use supercedence.
Thanks

What is the best way to handle input parameter

When writing sub-vi's, what is the best way to handle input parameter range checking? On the front panel I can choose to have numeric values coerced to be within range, but this does not affect constants or controls wired to the vi when used as a sub-vi. I can build range checking into the vi, but this can result in a cluttered looking vi. Do you have any suggestions.

As you discovered, the Range and Coercion properties of controls do not work when used in sub-vis.
Your best option is to go ahead and build your range checking into your sub-vis. If it�s something you will be doing a lot, just make your range checking a sub-vi and drop it where needed. This will keep the clutter to a minimum. You may end up with more than one range checking VI if you need different functionality, but this will still make less clutter and easier re-use.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

What is the right way to handle events?

What is the right way to handle events? If I start doing stuff in the AWT event thread (particulaly things that create their own events) should I be starting a new thread?
A link to a good book or reference source will do
thanks in advance

http://java.sun.com/docs/books/tutorial/uiswing/events/

I am giving away a computer, what is the best way to wipe out data prior to depature

i am giving away a computer, what is the best way to wipe out data prior to depature

Did the Mac come with two grey disks when new? If so, use disk one to erase the drive using Disk Utility and then re-install the OS from the same disk. Once installed, quit and when the new owner boots they can set it up as a new out-of-the-box Mac when they boot it up. The grey disks need to be passed on with the computer.
If you need detailed instructions on how to erase and re-install please post back.
If the Mac came with Lion or Mountain Lion installed the above process can be done using the Recovery HD as since Lion no restore disks are supplied with the Mac.
The terms of the licence state that a Mac should be sold/passed on with the OS installed that was on the machine when new (or words to that effect).

What is the best way to edit meta data..

What is the best way to edit meta data and tag photos, faces, places etc. and have the data saved to the original photo.
On a PC I would just use Windows Gallery. iPhoto on the Mac allows for some tagging, but it doesn't save to the original file.
I like to have my photos in a folder, edit them and save the changes.
What software would work best on a MAC to accomplish this?
Thanks for any help,
Nick

iPhoto is a database and any metadata you add or edit is available in any app - if you learn how to use it.
iPhoto is a non-destructive processor. It never touches the original file - it treats it like a film shooter treats the negative.
If you want a copy of the original file with the metadata included simply export a copy.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
As an FYI:
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491

What is the best way to captue current date and time?

I got a field in table to capute current date and time...i am
using SQL Server.
field name datatype length
enter_datetime datetime 8
What is the best way to get current date and time and insert
to table?.
Is this way?.
<cfset curtime = 'dateformat(#now()#,'mm/dd/yyyy')&"
"&timeformat(#now()#,'hh:mm:ss')'>
This way looks like time is not entered correctly.
or any other better way?.

> get current date and time and insert to table?
You can use cfqueryparam
<cfqueryparam value="#now()#"
cfsqltype="cf_sql_timestamp">
Or as was suggested, set the default for your table column to
getdate(). Then you won't have to insert anything. Sql server will
do it automatically when a new record is created.

What is the best way to insert massive data into an existing excel file?

dear gurus,
i am wondering that what is the best way to insert massive data into an existing excel file, more performance perspective.
the file is read from BDS , and we want to insert data into it .
the way i can think of is
1. OLE AUTOMATION
   i think performance will be a big problem
2. Office integration
    i am not sure it's facing the same performance issue ?
3 . XXL_SIMPLE_API/FULL_API
    I am not sure whether they can insert data into an existing excel file?
could you please give me some advices?
br.
jun

Hi,
If you want to APPEND data( add data to an existing excel file) from SAP, then use GUI_DOWNLOAD fm with APPEND = 'X' paramter.
Best regards,
Prashant

What is the best way to transfer my date from my old iMac to my new iMac?

what is the best way to transfer my date from my old iMac to my new iMac? I don't have a time capsule, so I cannot use time machine.
thanks

Your best bet by far is to use Setup Assistant when the new Mac first starts up to transfer directly from the old one.
It's similar to Migration Assistant, but doing it that way will avoid having an extra user account.
Either way, you can connect them via FireWire, Thunderbolt, or your network, but avoid wireless if at all possible. You can connect both to your netwrork via Ethernet, or put a single cable between the two.
See Using Setup Assistant on Mountain Lion or Lion for details.

What is the 'quickest' way to read char data from a txt file

Hello,
What is the 'quickest' way to read character data from a txt file stored on the phone to be displayed into the screen?
Regards

To be even a bit more constructive...
Since J2me does not have a BufferedInputStream, it will help to implement it yourself. It's much faster since you read large blocks at ones in stread of seperate chars.
something line this lets you read lines very fast:
while ( bytesread < filesize ) {
         length = configfile.read( buff, 0, buff.length );
         // append buffer to temp String
         if ( length < buff.length ) {
            byte[] buf = new byte[length];
            System.arraycopy( buff, 0, buf, 0, length );
            tmp.append( new String( buf ) );
         } else {
            tmp.append( new String( buff ) );
         // look in tmp string for \r\n
         idx1 = tmp.toString().indexOf( "\r\n" );
         while ( idx1 >= 0 ) {
            //if found, split into line and rest of tmp
            line = tmp.toString().substring( 0, idx1 );
         /// ... do with it whatever you want ... ////
            tmp = new StringBuffer( tmp.toString().substring( idx1 + 2 ) );
            idx1 = tmp.toString().indexOf( "\r\n" );
         bytesread += length;
      }

(workflow question) - What is the best way to handle audio in a large Premiere project?

Hey all,
This might probably be suitable for any version of Premiere, but just in case, I use CS4 (Master Collection)
I am wrestling in my brain about the best way to handle audio in my project to cut down on the time I am working on it.
This project I just finished was a 10 minute video for a customer shot on miniDV (HVX-200) cut down from 3 hours of tape.
I edited my whole project down to what looked good, and then I decided I needed to clean up all the Audio using Soundbooth, So I had to go in clip by clip, using the Edit in SoundBooth --> Render and Replace method on every clip. I couldn't find a way to batch edit any audio in Soundbooth.
For every clip, I performed similar actions---
1) both tracks of audio were recorded with 2 different microphones (2 mono tracks), so I needed only audio from 1 track - I used SB to cut and paste the good track over the other track.
2) amplified the audio
3) cleaned up the background noise with the noise filter
I am sure there has to be a better workflow option than what I just did (going clip by clip), Can someone give me some advice on how best to handle audio in a situation like this?
Should I have just rendered out new audio for the whole tape I was using, and then edit from that?
Should I have rendered out the audio after I edited the clips into one long track and performed the actions I needed on it? or something entirely different? It was a very slow, tedious process.
Thanks,
Aza

Hi, Aza.
Given that my background is audio and I'm just coming into the brave new world of visual bits and bytes, I would second Hunt's recommendation regarding exporting the entire video's audio as one wav file, working on it, and then reimporting. I do this as one of the last stages, when I know I have the editing done, with an ear towards consistency from beginning to end.
One of the benefits of this approach is that you can manage all audio in the same context. For example, if you want to normalize, compress or limit your audio, doing it a clip at a time will make it difficult for you to match levels consistently or find a compression setting that works smoothly across the board. It's likely that there will instead be subtle or obvious differences between each clip you worked on.
When all your audio is in one file you can, for instance, look at the entire wave form, see that limiting to -6 db would trim off most of the unnecessary peaks, triim it down, and then normalize it all. You may still have to do some tweaking here and there, but it gets you much farther down the road, much more easily.Same goes for reverb, EQ or other effects where you want the same feel throughout the entire video.
Hope this helps,
Chris

What's the best way to handle this?

I'm not sure what APIs/setup to use for this situation:
A company wants to store data projects they do for clients. Each year, the data fields are set (as a result of gov't requirements) and they won't change for any client project for that year. however, the fields required can (and usually do) change every year. So things they require this year, might not be needed the next year and new fields might be introduced.
While there are likely to be many common fields from year to year, there's no way to guarantee which ones will remain consistent. They also want to be able to do searches on the data and fields, for projects within a year and across years.
What's the best framework/API/configuration to handle this? EJB? Simple JDBC? If so, how should the database be handled? Won't it have to constantly create new fields in a table? Or is there another way to handle this?
What's the best way from a "clean architecture" standpoint?

dang, I really have to start over? I finally got all this stuff working again. well, hopefully it won't be as big a pain this time since the data won't be coming from a different machine. After completing the Migration Assistant process, I had to reinput a bunch of serial numbers for apps, reinstall print and mouse drivers, etc... I've finally got the new machine up and running smoothly and now I gotta start over? Sigh.
I was hoping that either I could rename the current account after deleting the other one, or just move everything from one account to the other and then delete the 'RJM' account.
ok, so it sounds like here are the steps I need to take:
- make another full cloned backup of this current machine in Super Duper
- reboot this machine using the advice in the first post, wipe everything clean and reinstall the OS
- create a new account like 'user1' and re-do software update (which is like 2.5 gig worth of stuff) and takes like an hour even on a high speed connection
- then re-do the migration assistant process to the properly named account
- then delete the 'user1' account
does that sound right?

What is the best way to handle .mod files in premiere pro cs4?

I recently got a JVC Everio GZ-MG130u and as I'm sure many of you are aware, it saves footage in the .mod format.
I have googled this and found quite a few different solutions, but I'm just wondering if anything has changed since some of these solutions were posted, or in other words, what is the best way at this current point in time to handle .mod files in premiere pro cs4?
As far as I know, the best thing to do is convert the .mod to .avi and then import it into premiere so it can be edited.. Is there a better way to do it than this? Also, by doing it this way, will I have separate audio and video tracks?
Thanks.

I have just done a bit of reading, here. All of the quotes that follow are from users who have posted in that thread.
It seems that there isn't one solid answer on this subject. The thread that I linked to was started 2 years ago, and replied to just 4 ago, so it's relatively current.
I noticed a couple different interesting statements:
posted by mmontgomery:
In the case of .MOD, you are actually getting a MPEG-2 file. The way
video files work is that there is a codec (COmpressor/DECompressor)
algorithm and a file wrapper (or extension). A JVC .MOD file is a
MPEG-2 encoded file, with a .MOD extension.
You're faced with two
challenges, first the .MOD file type is only recognized and support by a
few applications. I think we covered some of those already. The
interesting thing about wrappers and extensions is that they can be
dealt with in a variety of ways. Sometimes all you need to do to convert
the video file to a compatible video file is to change the extension.
In the case of .MOD files that's not enough. The .MOD wrapper apparently
does a few more things than just bare a unique extension name. It
requires a slightly more complicated method to convert that file. That
is why there is supplied software and that certain third party
applications have .MOD support.
(posted 2 years ago)
This seems to indicate that Ann's solution of simply re-naming the extension is not good enough, unless I am mis-interpreting what she meant.
However, another user said:
posted by futball8:
I edit with Adobe Premiere Pro CS3. All I have to do is simply rename
the .MOD files as .MPG and then import into PP CS3. It takes a small
amount of time to conform the audio, but no file conversion is
necessary. It's a pretty slick workflow and I've never encountered any
problems editing them this way.
(posted 5 months ago)
One can only assume that simply re-naming the extension from .mod to .mpg works in some circumstances, and doesn't work in others. I assume it depends largely on the editing software being used. Perhaps there are still issues that futball8 was simply unaware of or never encountered.
That said, there seems to be a couple of different real solutions to this problem that I have found:
1. Simply use an editing program that supports .mod file format. While pe7 and pe8 supposedly support the .mod format, the following should be noted:
posted by macksgarage:
While Elements 'supports' these files, it is markedly unstable and frequently crashes while using the files, though the application is otherwise reliable. The solution I have arrived at is to repair the container using ffmpeg. (see #3)
(posted 5 months ago)
2. Use a file conversion utility of your choice that will covert .mod to .avi, or another desired format. Import the resulting .avi file into premiere pro cs4.
3. Use FFmpeg. This seems to be the best solution as it does not convert any audio or video:
posted by macksgarae:
If you are not familiar with ffmpeg, it may be a bit of a bear to
learn, but it's not only useful for this, but functions as a video swiss
army knife useful for splicing, muxing/demuxing, and rendering just
about any format into just about any other format.
ffmpeg is an open source project from the linux world, but it has
been ported and is supported on windows. Fetch it here and place it somewhere handy
on your system.
To rewrite the container into a nice, standards compliant .mpg file
that doesn't make applications die, WITHOUT rerendering video or audio
itself, I use this command.
ffmpeg -i INFILE.MOD -acodec copy - vcodec copy OUTFILE.mpg
This not only renames the file, but actually rebuilds the container
around unmodified video and audio data, yielding a file which works much
more stably with Adobe applications, and presumably others as well, as
ffmpeg's open source development goals result in very standards
compliant files.
(posted 5 months ago)
Now, this seems to properly address the issues that can arise from simply renaming .mod to .mpg, as suggested by Ann. So from this point, I assume you can simply import the .mpg into Premiere Pro cs4 (or any other .mpg compliant program) and edit without issue, but it seems like I remember hearing something about Premiere not liking mpegs or something like that, so in that case, maybe it'd be better to skip this and go with option #2. But, it's been awhile since I've touched any NLE, much less premiere pro cs4, so I could be completely wrong and it may have no problems handling mpegs.
All of the things that I've quoted here came from the same thread, so I don't know how accurate any of this is, but the people that have posted these things seem fairly knowledgeable. If someone reads all of this and can confirm or deny any of it, it would be much appreciated.
Option 1 is not really an option for me, because I am sticking with premiere pro cs4 -- I'm not going to get another editor just because it has .mod support. That leaves me with options 2 and 3: Convert to avi, or change the file wrapper/extension properly with FFmpeg and then simply import the resulting .mpg file... Which is better? Or is there yet another solution that I am unaware of that would be even better?

What is the preferred way to handle ASUnicode data?

Similar Messages

Maybe you are looking for