What is the prioritization of data when syncing to different computers?

All of the bookmarks, passwords, etc. that I want to keep are on my '''laptop'''. If I've set up my Firefox Sync account on my ''desktop'', and I add my '''laptop '''to that account, will the "syncable" data from my ''desktop ''overwrite all the "syncable" data on my '''laptop'''?
I've lost all my contacts on my phone before because of some overzealous syncing program and I'd like to not lose my precious treasure trove of bookmarks and passwords (that I may or may not remember anymore...)
Tanks in advance.

iCloud will sync whatever you have set up, a e you sure it's an iCloud issue or a "view issue"?  
What can happen on your Mac is that it keeps any "On My mac" contacts in your "on my mac" contact list.  Their will also be a "iCloud" view that will represent the On My Mac contacts and your iPhone contacts.  If your view is too wide open you maybe seeing "on my mac" and iCloud" contacts.
If your iPhone conatcts were slightly different than your Mac contacts they will be duplicated.
I found the easiet thing to do was to go to iCloud.com, log in and see what is in the iCloud contact list.  If you have contacts from both your iPhone and your Mac then you are in great shape.
I cleaned things up in iCloud .com because I only want to have one contact list across my devices.
Hope this helps a bit.

Similar Messages

  • Ipod touch always changes the time and date when synced

    Since I got my touch, even before any updates etc, every time I sync it the time and date changes, usually back about a week or so. Anyone else got this problem or any solution as its really annoying me. A cutting edge bit of kit that has practically every function that works so well and the clock and calendar cant keep time? weird....

    Not true in all cases, I updated to 2.0 and had 2 problems: One App had a Bug *NOT Apple`s fault*, and the second was another App ( again, not Apples fault ) that went back to home screen after opening. This was solved by a simple reset ( I have the first batch of Touches, 16 gb ). And the battery thing, I haven`t noticed it at all, I have an almost full charge, and have been using it for 4 days, never shut it down, only sleep mode when not in use.

  • When I call nifGetObjectDictionary on a Domain Index, what is the format of data returned

    hello,
    When I call nifGetObjectDictionary on an Active Schedule Domain Index (450) of NI Card, retrieved from S-OD -> DLL Link Schedule OD Index, what is the format of data returned? I received 0801C202FFFF000000 as data and it is not matching with FF-Spec (Field Device Access Agent, page 95).
    Could you please let me know the format/structure of the data i received, so that i can parse them and understand?
    Also let me know is there any API available in NI API to upload/read Schedule Domain?
    Thanks
    Shankar.

    Sorry for replying late!
    We don't have the nifGetObjectDictionary function, so may I make a guess that you mean nifGetObjectDescription? If I'm right, there will be some trouble.
    To be honest, basically we don't support the APIs which are not included in the "NI-FBUS CM Function Reference Manual". In further, would you please let me know how you find this kind of internal functions? We cannot support it until we verify the customer has bought the complete version of APIs package and this package is still in the support period. If it matches your case, would you please help me in the verification? And then we can support the details for your question later.
    On the other hand, we don't have the APIS to upload/read Schedule Domain now.

  • What is the use of jsp when compare with Struts

    what is the use of jsp when compare with Struts

    JSP Tag Libraries are great for reusable content formatting and ligic.
    For example, let's say you have this Shopping site. Each item you sell is stored in a database, and you get them out depending on Catagories, creating a List of ItemBeans. You allways want to display the items with a catagory header, then a <table> with the item number, the description and the price.
    Instead of creating a bunch of logic in the JSP that does this, you can pass it on to a Tag that might look like this in your JSP:
    <shopping:itemTable catagory="${selectedCatagory}" items="${itemsForCatagory}" />
    This would make the JSP easier to read and work with.
    The actual uses are incredible. Have you used the <jsp:useBean ...> tag? That is an example of a use of the Custom Tag Libraries.
    Furthermore, look into JSTL (JSP Standard Tag Libraries). They are a collection of tags (API by Sun, coding by Apache) used to do many of the standard actions you might want/need to do in JSPs, like a conditional tag (c:if only do something if the test is true), multiple-conditional tags (c:choos c:when c:otherwise) like an if [else if] else construct. Looping through an array or Collection (c:forEach), storeing values in scopes (c:set) formating numbers and dates (the fmt library), xml transformations (xml library), and lots of other things that you could replace scriptlet code with.

  • What is the yellow portion "other" when updating your phone on itunes? What makes up that category?

    What is the yellow portion "other" when updating your phone on itunes? What makes up that category?

    anything that's not music, photos, apps, etc. anything that is not whatever is shown next to the other on the bottom of your screen. for example, if you look on your phone at settings, general, usage and click on any of the apps it will show you how much the actual app takes up and also how much documents and data it has; that documents and data portion will be counted as other. most phones that are operating normally have around 1gb of other so if you have a lot more than that you probably have a corrupt file or something. in that case search "removing other from iphone" will help you, but usually restoring is what will fix it.

  • What is the difference  between  data file  & control file

    what is the difference  between  data file  & control file

    Dear Deba s
    Control file
    Every Oracle Database has a control file, which is a small binary file that records the physical structure of the database. The control file includes:
    The database name
    Names and locations of associated datafiles and redo log files
    The timestamp of the database creation
    The current log sequence number
    Checkpoint information
    For more info look into these
    [Control File Basic|http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14231/control.htm#i1006143]
    Data File
    You manage Data File in your Oracle database as part of Space Management. You can extend, create, drop, and alter tablespaces.
    You especially need to avoid tablespace overflow, which is when a tablespace runs out of freespace in the allocated file or files. This happens when an object requires a new extent but there is either no freespace or insufficient freespace in the tablespace
    For more info look into these links
    [Data files |http://help.sap.com/saphelp_nw04/helpdata/en/98/5dd5890f32274aa884e45e736752a2/frameset.htm]
    http://help.sap.com/saphelp_nw04/helpdata/en/98/5dd5890f32274aa884e45e736752a2/frameset.htm
    Hope it helps you,Revert me back if you have any queries
    Assign points if helpful
    Regards
    Bala

  • What's the connection between data connections (3G/4G/WiFi) and phone signal strength (calls)?

    At home I'm almost always on my wifi with the 3G/4G turned off.  I've turned it on to experiment, and I get 3G in my house, but the reception (to make and receive phone calls) stays at 0 to 1 bars.  There is a Target store about a 10 minute walk from my house and I get 4G LTE when I'm shopping there, but the reception (calls) is still weak, maybe better but I can't tell you offhand.
    There is a Verizon tower about 6 miles southwest of my home; they actually had me drive out and sit under it last winter to fix a Droid Pro problem once.
    I absolutely do not understand how 3G and 4G relate to call signal strength, as it's been eluded to in other discussions.  I'm getting the impression that it affects the signal strength for phone calls, but then how can I (on my old phone) toggle it off and still have signal for calls?  When I drive into the heart of 4G LTE country I can turn off the data and still have 4 or 5 bars.  What's the connection between data and phone signal strength?

    "Service isn't guaranteed inside buildings."
    Nor outside,
    Nor under a tower,
    Nor in a car,
    Nor while eating green eggs and ham,
    Sam I am.
    Sorry Dr Seuss. 

  • What is the actual delivery date

    Hello All,
    In the delivery what is the actual delivery date
    Regards,
    Abhijit Dixit
    +91 9820935468

    Hi,
    The actual delivery date is the date by which your goods reach the customer.
    It is field appearing in delivery.
    Planned delivery date will be calculated by the system automatically based on the backward or forward delivery scheduling based on which you maintained in your entry there.
    But it is the actual date when the goods reach the customer.
    Regards,
    Krishna.

  • What deterimes the amount of data in a waveform from a TDS 1012 scope

    Hello,
       What determines the amount of data that is in a waveform that comes out of a TDS 1012 scope? I am assuming that I will have to look at the driver vi to determine the commands sent to the scope to figure it out. I am in a situation that I need to have the y axis to have a high resolution, that results in very little data being collected from the scope.
    Regards,
    Kaspar
    Regards,
    Kaspar

    Hello,
        The amount of data that comes out of the TDS 1012 scope is determined by the data start (DATaTARt)  and data stop (DATaTOP)  commands that are defined on page 58 (2-38) in the  346 page programming manual for the scope. I found of that the data start was not set to 1, which is the beginning of the data.
        I also had a very low level signal on channel that was all most unreadable by the scope that caused me to think that I was not getting all of the data.
    Regards,
    Kaspar
    Regards,
    Kaspar

  • What are the Non SAP data sources supported for Analysis workbooks?

    AO 1.4 SP6
    BO 4.1 SP2
    What are the Non SAP data sources supported for Analysis workbooks?
    Thanks.

    HANA is a data source (which could contain non-SAP data)
    For other Excel front-ends that may connect to "non-SAP" data look at Live Office or Power BI by Microsoft - see Excel and Power BI connectivity to SAP BusinessObjects Universes | Power BI

  • I have just opened 2 new albums in photo but cannot see the albums thru' itunes when syncing my ipad or thru' the screen saver on ITV

    I have just opened 2 new albums in photo but cannot see the albums thru' itunes when syncing my ipad or thru' the screen saver on ITV . My photo apps is Version 1.0 (209.52.0)

    Have you tried deleting the photo cache from your computer and then re-trying the photo sync and see if they all then copy over (you need to select and sync all the photos that you want on the iPad together in one go, as only the most recent photo sync remains on the iPad) ? The location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
    Don't know about the Facebook photo emailing, but there are a number of apps that allow to upload photos to their site (e.g. the 'official' Facebook app).
    (For future info, typing all in capitals is considered SHOUTING - you are more likely to get help/responses if you don't.)

  • What is the default staging mode when it is: (not specified) ?

    Hi All,
    What is the default staging mode when none is specified?
    As per docs, there are three: stage, no stage and external stage
    http://docs.oracle.com/cd/E17904_01/apirefs.1111/e13952/taskhelp/deployment/SetAServerStagingMode.html
    Many thanks.
    Running Weblogic 10.3.5.0 on OEL.

    "stage" directory means that the EAR file will be temporarily copied to that location and will be used only when the application source directory is not available OR when the administration server is down.
    It is like a local copy of the source directory for your application.
    Sometimes, during restart/redeployment, the managed server could pick the application files from the stage directory.
    But, in general if you use the "Update" option in "Deployment", the files in the stage directory are replaced by the files from the "source" directory.
    What I suspect here is in PROD, if you might have any permission issues with the stage directory?
    Can you please check that the stage directory is owned by the user running the server process AND that the directory permissions is set to 755. And not only directory the files also should inherit the same ownership and permissions.
    That is the only thing I can suspect.
    Arun

  • What is the purpose  of Date From and Date To In Oracle HRMS ?

    hi
    I have doubt on
    What is the purpose of Date From and Date To In Oracle HRMS?
    Thanks

    Where do you see these fields? Please give full details (eg, the navigation path).
    If you're referring to Effective Start Date and Effective End Date (effective_start_date, effective_end_date) these are two fields that appear on many HRMS entities. They're used to store dated history over time. For example:
    14-Jan-2009 to 19-Apr-2009 - Pam Stephens
    20-Apr-2009 to date - Pam Erickson
    In this example Pam got married on the 20th April 2009 and changed her surname from Stephens to Erickson. Here the history of changes are kept so that if we date-track to any time prior to the 20th April 2009 we'll see Pam Stephens and if we date-track on or after the 20th April 2009 we'll see Pam Erickson.
    Check out the following Oracle Support article for more information:
    How Date Track Works [ID 177733.1]

  • What are the username and password when i click the ICM of JavaEE5@SAP

    when i click the ICM of JavaEE5@SAP in the sapmanagement console mmc, It need i input the username and password for Web_admin, What are the username and password when i click the ICM of JavaEE5@SAP and which tools act the role as the VisualAdministrator of NetWeaver04s and NetWeaver2004s?
    thank you very much

    Hello Guoging,
    you can login to ICM with username Administrator and password abc123. That is described in the start.html file, which you can find in the unzipped Downloadpackage of SAP NetWeaver Java EE 5 Edition.
    You can use NetWeaverAdministrator(NWA) or config tool to configure this edition. NWA
    needs to be installed separately. If you have a default installation, go to
    C:SAPJP1JC00j2eeNWAdmin and execute the file install.bat. Ensure that NetWeaver is running, enter user Administrator und the Masterpassword you chose during installation and wait around 20 Minutes or more. NWA is started automatically after installation has finished in your webbrowser.
    For more information on NWA read the Administrationguide
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/806e75a0-0e01-0010-2587-fc518de8ac1a">Administration Guide</a>

  • What does the RHD symbol mean when using the multiple speakers?

    i have two 1st gen apple TVs and when i pull up the multiple speakers prompt, i see an acronym "RHD" after each device.
    what does the RHD symbol mean when using the multiple speakers?
    typically i was used to seeing the Apple TV-1  vs. Apple TV-1-RHD??
    What is the difference?

    It's been modified to run Remote HD.
    http://remotehd.com/

Maybe you are looking for