What is the private mode

hi Experts,
                 Pls clarify what is the private mode and how we it can relate with Heap Memory?
Thanks in advance.

hello amit
Private Mode
Private mode is mode where the heap data is getting exclusively allocated by the user and is no more shared across the system, this happen when your extended memory is exhausted.
You can go to transaction
ST02 --> Double click on extended memory --> Mode List
From there you see a history of which users were using all of your extended memory, and how much memory total.
If you want to know more about private mode
http://help.sap.com/saphelp_nwpi71/helpdata/en/7a/caa6f3bfdb11d188b30000e83539c3/content.htm
I hope this information will help you a lot
Thanks & Regards
Shishir

Similar Messages

  • What is the private tab.

    What is the private tab which has mysteriously appeared on Safari ?

    Nothing mysterious about it... Read here...
    https://discussions.apple.com/message/23960680#23960680

  • What are the lock modes in Lock object

    What are the lock modes in Lock object ?
    what are the divfferences between
    Exclusive , cumulative
    Shared
    Exclusive , not cumulative
    Could any body explain what happens in each table lock ?
    How the lock consists ?

    HI
    Lock objects are used to synchronize access to the same data by more than one program.
    The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table.
    There are three types of lock modes
    1.Exclusive
    2.Shared
    3.Exclusive not cummulative
    Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
    Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
    Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
    please go through these links:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm</a>
    Regards,
    Gunasree.

  • Is it possible to install a module only for the private mode (i would use https everywhere only in this mode). Is there any way to do that ? Thanks

    I would use the module "https everywhere" wich is an extension that encrypts communications with many major website. The thing is that i dont want to use it all the time.
    The way to use it perfectly would be to activate it only when i'm in private mode (wich makes sense IMO).
    Is there any way to install / configure it in order it's effective in the private mode but not in the normal one ?
    That would be a great feature but i found nothing about it.
    Btw, sorry for my bad english, not my mother tongue anyway ;).
    Thanks for your support.
    Best regards

    I know i m running on firefox 24, but i m working with GWT plateform and there is no pluggin for version higher than 24.
    Thank you for your help, it fit perfectly with my issue. Much appreciated.
    Best regards

  • What are the MDM Modes and explain them?

    hi friends,
    What are the MDM Modes
    please explain each mode with examples?
    thanks and regards,
    ramu.

    Hi,
    There are five modes in Data Manager which are as follows:
    1. Record Mode: When Data Manager starts, record mode is opened.It is the primary working view. From here, the content of the data can be
    managed. We perform various operations like
    a. Adding a record
    b. Deleting a record
    c. Searching a record. The search for a record in record mode can be started from the tree view located in the left area of the main window. The search parameters are shown here.
    2. Hierarchy Mode: In this mode, the user of the Data Manager can view and change all hierarchies stored in the repository. The hierarchy table to be edited can be selected here. The tree view displays the tree structure of the hierarchy.
    3. Taxonomy Mode:  The taxonomy determines how records belonging to different categories are defined. Through a taxonomy, an attribute can be attached to a record. These additional attributes are defined for records, which belong to a certain category. An example of this could be personal data, which differs according to the role in the organization, and thus includes additional information.
    The taxonomy mode can only be selected if there is a table of type Taxonomy in the repository.
    4. Matching Mode:  We can define transformations, substitutions, and matching rules u2014 and bundle these rules into matching strategies.
    According to a matching strategy, for example, SAP net weaver MDM will calculate scores for the probability that specific records are duplicates. We can then compare potential duplicates and merge any objects that are in fact repeated.
    In Rules Tab, we set up rules to automate the detection of duplicate master data.
    In Strategies tab, we bundle rules into matching strategies to calculate the probability of duplicates.
    A high matching score indicates that a data entry is likely a duplicate record.
    5. Family Mode: In family mode, all existing records that are already assigned to a category can be subdivided into families. The taxonomy table in which the family definitions are to be stored is selected in the toolbar. Then the family can be selected in the tree view.
    Regards
    Richa

  • What is the safe mode key for 875p neo board

    can you please tell me what the safe mode key is for this board as F8 key in xp pro wont do?
    regards,
    bunter

    Quote
    Originally posted by CROBBO
    @ Assaf correct  
    I tried your suggestion and you were correct again thanks m8  
    I have Built many Pc's first time using an MSI mobo, I have been fault finding and have many problems.
    So Assaf going to need some more of your knowlage please.  
    I have the utils infoview & wminfo and I have big problems.
    Number of Proccessors: 2?  
    External Clock: 200MHz  
    Current Speed: 3200MHz  
    Device manager confirms this in Win XP Pro SP1, Tried uninstalling one of the cpu's reboot and it's still their 2 cpu's
    Some help would be very nice TA!
    TIA  
    Regards CROBBO  
    theres nothing wrong with those readings m8.
     you have 2 processors because of hyperthreading. windows sees it at 2 separate cpus.  you external clock is your fsb, which should be 200. this is quadpumped so essentially it is 800mhz, then your current speed is your cpus clock speed and since you have a 3.2p4 E it tells you its running at 3200mhz = 3.2Ghz  

  • The 50D has a sports mode. What is the same mode on the 7D

    I shot sports on my 50D using the sports mode.  What mode do you shoot sports on usint the 7D?

    Shooting in Sports mode is a convenient way to avoid learning how to do it right. It just uses a built in program that assumes some variables will always be similar so it sets the camera to capture action using that program & light meter readings. Unfortunately different sports require different settings to capture them properly, which is why more advanced cameras ignore those modes. Let me explain that plus I'll direct you to an article I wrote which should help you get a handle on the settings.
    Sports & Action are one in the same when it comes to the camera settings but the shutter speeds used need to match what's considered a good photos of that activity. In motorsports we want to freeze the car or bike etc, blur the background & more importantly the wheel & tire to show speed. Freeze all of that & it looks like the car or bike etc is just parked on the track. The same for shooting prop planes, they need prop blur if they are flying through the air. The reverse is true for poeople playing sports (in general) so you use a faster shutter speed & freeze everything in the frame. Each activity is different so it's important to learn what looks correct & then set the camera to get that result PLUS learn how to pan SMOOTHLY.
      http://www.rccanada.ca/rccforum/showthread.php?t=147971&highlight=Aviation+photography+101
    "A skill is developed through constant practice with a passion to improve, not bought."

  • Whats is the 0record mode what is it significance ?

    hi all
    what is the significance of  0record mode in ods and what are the different types of images ?
    explain with an scenerio.
    thanxs
    hari

    Hai hari,
    <b>0recordmode</b> is the field added by the system, if the ds if delta capable.
    In ODS it is added ate the time of creation of the ODS.
    First: the recrodmode controls how data is posted into cubes or ODS (DSO) Objects.
    N for new records
    B for Pre Imgages
    ' ' for after images
    R for Reverse Images
    X for Storno
    D for Deletion of a Key (only in ODS possible)
    Y-Update image
    What extractor delivers what different types pof values can be seen via to tables:
    ROOSOURCE in the source R/3 System.
    There point out th edelta mechanism. With this value, check within Table RODELTAM. There you see the different POSSIBLE Values for ROCANCEL delivered by a DataSource.
    The relevant objekt for the controlling of the mode in BW is the InfoObject 0RECORDMODE. Each ODS (DSO) has this Object. For Logistic-Extractors (except MaterialManagement) 0RECORDMODE should be mapped with ROCANCEL.
    0STORNO generally is an InfoObject for Reports. E.G. Material movements. Stornos are posted in R/3 with particular so called movement types. Each movement typer contains an information if it is of type "Storno". If this is so, the field storno contains an X.
    If you now map the storno field onto 0RECORDMODE, the record is interpreted as a storno record an will be wied blank ini the DataTarget.
    If you have monotone increasing document numbers (like in CO-PA, CO-OM, MM-INV ...) 0RECORDMODE should be left blank. 0STORNO can be used for Reporting then and be filled differently.
    If you can have changes to an already existing document number (like in sales orders or purchase orders) i'd strongly recommend to map 0RECORDMODE onto the delivered ROCALNCEL field.
    Hope it helps.
    regards
    KP
    <b>Don't forget to asign points</b>

  • What is the recovery mode and what does it do to my ipad3/iphone5

    I have recently synced my photos to my regular computer- a month ago- and then the hard disk of the computer had burnt and my photos are gone because i didn't turn on the back up option before all of that happens
    I am trying to get them back because they are so important to me and i thought that the recovery mode would help but i don't know even a little about it

    iPad Photo Recovery: How to Recover Deleted Photos
    http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
    How to Restore Lost or Deleted Files from iPad
    http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
    How to Recover Deleted Files from iPad
    http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
    iSkysoft Free iPhone Data Recovery
    http://www.iskysoft.com/iphone-data-recovery/
    Recover iPhone/iPad/iPod touch lost data, Free.
    Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
    Recover data directly from iPhone or from iTunes backup
    Preview and recover lost iOS data with original quality
    Wondershare Dr.Fone for iOS
    http://www.wondershare.net/data-recovery/iphone-data-recovery.html?gclid=CJT7i9e 6gb4CFcvm7AodbUEAJQ
    Recover contacts, messages, photos, videos, notes, call history, calendars, voicemail, voice memos, reminders, bookmarks and other documents.
     Cheers, Tom

  • What is the "private" folder?

    Can I delete anything from it? It has folders called "var" and "tmp".

    i just found some problem with the "PRIVATE" folder.
    i have tried empty my trash many times but there are some files still there, when I check the file's info
    it is located in "/private/tmp/174/C/.Trashes"
    is it because the deleted file is under my bootcamp?
    please advice how can i delete these files.
    many thanks!!
    Message was edited by: gimuipepsi

  • What is the common mode range of the 6033E Daq Card?

    I'm reading the voltage accross a 10 ohm resistor in
    Differential mode. There is 1 AMP DC current
    flowing = 10 volts.
    When the UUT fails, the voltage on one side of the
    resistor could go as high as 50 volts.
    That's why I would like to know if the common mode
    voltage of the DAQ is withing 50 volts.
    thank you...
    \\carlos_diaz

    For DIFF mode, V+ and V- in have to be within +/-11V of AIGND. You'll probably have to go with NRSE.

  • What does the private keyword mean exactly?

    Hi,
    I thought I understood what "private" meant, but apparently not fully.
    Can someone explain the difference between the following two chunks of code and why one compiles when the other doesn't?
    class Component
      private Object loopID;
      private Container container;
      public boolean isActive()
        return loopID == container.loopID; //Doesn't Compile
        return loopID == getContainer().loopID; //Does compile
      public Container getContainer()
        return container;
    class Container extends Component
    }

    Put simply, private means you can't access the
    variable from outside
    the class. So you cannot use the "." operator to get
    access to it.
    But the method can return a reference to it, so the
    accessor method
    allows you to return a reference to the variable.
    Think of it this way:
    If you want to do "x.y" or "x.y()", the
    variable/method has to be public.
    If the variable/method is private, you can't access
    it with ".".
    By the way, there is an edit button--It is in the
    right corner above the message. I just added this
    with it. I didn't know it was there before.
    Message was edited by:
    WhyNotFerzlePut simply: no. Private means that access is only allowed from within the body of the top level class where it the member or constructor is declared. Your example is just wrong on a number of levels. I can access the member of an instance using "." if I have access, and I cannot if I do not have access.

  • ${createMode},${editMode} what are the other mode controls?

    Hi,
    I am developing a web application[JSP, struts, ADF BC]
    using JDeveloper 10.1.3. I am using <c:if test="${createMode}"> to hide or unhide some of my form's buttons.
    I have found ${editMode} too. I like to know if other mode control statements exists????and what are they?

    Was the iPad originally set up on a different computer, and hasn't been synced to the one that you are now trying to use ? There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141
    (Before trying that you could copy any important files/documents off the iPad so that you have you own backup copy of them e.g. depending upon what the apps support then email them to yourself, use Dropbox, copy them to your computer via your wifi-network.)
    You should be able to copy iTunes purchases off the iPad and over to that computer's iTunes via File > Devices  Transfer Purchases, but if you have music from other sources (e.g. copied from CDs) which aren't in that computer's iTunes (and you haven't got a backup to copy them onto it from) then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991
    For recovery mode, that will result in your iPad being put back to factory defaults i.e. all of your content will be removed from it

  • What are the Batch mode parameters for Receiver JDBC Adapter

    Hi All,
             Could some pls tell me how to set bacth mode in receiver JDBC adapter and what are its parameters and how to configure them. i beleive there is something like max count parameters etc..
    Regards,
    Xier

    Hi,
    Check this for more info
    http://help.sap.com/saphelp_nw04s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
    Regards
    Seshagiri

  • What is the connection mode?

    Hi every expert,
    I use Oracle Applications 11i in my company. How can I
    know which type of connection the application is? (1. http, 2. https, 3. Socket)
    When I open the file formsweb.cfg, I found a line
      connectMode=%forms_server_mode%
      where can I find the value of %forms_server_mode%?
    (I also want to know when I put the server-compiled fmx file to the
    suitable place, how can I test/run the form)
    I am so painful in deploying the forms on web!!!
    Thanks a lot!

    If you want your iPhone Wi-Fi to stay connected in sleep mode, plugin using the wall power socket.

Maybe you are looking for