What is the Process code for IDoc SISCSO01

Hi all,
I am using 4.6c version.
I am going for an outbound IDoc SISCSO01 for sales Order confirmation.
I want the process code (we41) which suits this IDoc SISCSO01.
Can you please help to get the process code so that my IDoc can be sent succesfully.
Best Regards,
Gangolu

Hi Gangolu,
I don't think there is an outbound process code for IDoc type SISCSO01.
But you can generate the IDoc with this FM <b>MCV_STATISTICS_ALE_OUT_ORDER</b>. But you still need to setup partner profile, distribution model and etc.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Similar Messages

  • What is the process code for Message type FUNDMA

    Hi,
    I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
    Thanks
    William

    Check entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
    Hope this helps.
    ashish

  • What is the process code for message type FIXEDASSET_CREATE?

    Hi all
    please tell me that what is the process code for
    MESSGAE TYPE = FIXEDASSEt_CREATE,
    FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
    BASIC TYPE = FIXEDASSET_CREATE01 ?
    thanx in advance.......
    Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
    Edited by: Prachi Sharma on Jan 11, 2008 8:03 AM

    Hi,
    Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
    Check below Tables as well
    EDE1T
    EDE2T
    EDE5T
    EDE6T
    TEDE5
    TEDE6
    Regards,
    Satish

  • Process code for IDOC Output from MIRO

    Hi,
    We need to find the Process code for IDOC output to assign Output type in ECC. We need the IDOC output to some other system like PR while doing the invoice Posting (Transaction code MIRO). We tried Using process code SD09 for the IDOC with IDOC Type INVOIC02. In SD09 we are getting error (Update terminated) when we trigger the output while saving in MIRO transaction.
    Further we understand that process code SD09 is used for SD billing and Invoice process.
    We need your help in
    1.      getting the correct process code for the IDOC generation for Invoice posting thru MIRO.
    2.      If we need to configure one process code, let me know the correct function module for the same.  
    Please Note, we need this as Output Idoc from Invoice Posting MM (MIRO).

    Hi Shankar,
    Thanks for quick for reply. We have tested this process code with IDoc type - GSVERF03 and message type - GSVERF. It worked for us for MIRO transaction.
    we are testing with IDoc type INVOIC02.
    once again thanks for sharing the process code.
    Regards,
    Brahma

  • What is outbound process code for quotation

    hi
    what is outbound process code for quotation

    Process code for outbound processing - Code which identifies the type of data which is to be sent via the IDoc interface.
    Use - Using the process code, the IDoc interface finds the application selection module which converts the SAP document into an IDoc.
    The process code is only used with applications which perform outbound processing via Message Control (NAST).
    Check with tcode WE41
    Process code SD12 - QUOTES: Quotation
    Regards,
    maha

  • What is the proces code for mbgmcr

    what is the proces code for mbgmcr

    HI,
    This is the Functionmodule under that process  code
    MB_CREATE_GOODS_MOVEMENT
    Regards
    Sudheer

  • What is the bypass code for lock screen

    what is the bypass code for the lock screen on i pod touch

    To restore the iPod to get rid of the lock combination you forgot, just follow these steps....
    1) Plug your iPod into the PC
    2) Wait for iTunes to sync your device like normal and let it back up all of your stuff, since restoring deletes all of your data
    3) Go onto your iPod's menu (The one that shows the memory bar at the bottom)
    4) Locate the Restore button on the screen and click restore
    5) If your not on iOS 5.0.1 yet, it will ask you to download the latest firmware, go ahead download it
    6) When it is done downloading it will take you through the restoration process.
    7) When it asks you if you want to restore it from a backup or set up as new when everything is finished, make sure you select "Back up as new"!!!
    8) Re-Sync your music, apps, photos, mail, contacts, etc. and anything you had before, and you device is just like new.

  • Process codes for Idoc types

    Hi All,
    Can you please send me the process codes for the following IDOC types as I could not find them in WE64. Also let me know how did you found out.
    IDOC types are:
    1) INTERNAL_ORDER_CREATE01
    2) PROFITCENTER_CREATE01
    3) COSTCENTERGROUP_CREATE01
    Urgent help is really appreciated.
    Regards,
    Shahu

    Hi,
    1) INTERNAL_ORDER_CREATE01
               Please clarify for which order you are using this.
    2) PROFITCENTER_CREATE01 -
               PRCM (PRCMAS)
    3) COSTCENTERGROUP_CREATE01
               COSM (COSMAS)
    Reward points if useful.
    Regards,
    Atish

  • Can we create a developersite in O365 SP Online programiatically ? what is the template code for it ?

    Hi
    I am trying to create sites programmatically in O365 SharePoint Online. So, just want to know that can we create a DeveloperSite ?? what is the template code for it viz. Team site- STS#0, etc
    If possible provide me the MSDN link where I can refer for available site templates for O365 SP Online sites creation.
    Thank you 

    http://community.office365.com/en-us/f/154/t/61145.aspx
    Are you meaning to create sites on SharePoint Online by invoking web services in your own program? SharePoint Online indeed provide some web services for custom programming, however, the web methods for creating a new site seems not included in them. Here
    are some resources for the development of SharePoint Online for your reference:
    SharePoint Online for developers
    http://msdn.microsoft.com/en-us/sharepoint/gg153540.aspx
    Code example for SharePoint Online: Accessing Web Services
    http://code.msdn.microsoft.com/office/SharePoint-Online-0bdeb2ca
    As to create a site collection, the parameter "Template" is the name of the template you want to use, as to find the name of the custom site template, you can use the powershell command "Get-SPOWebTemplate",
    it will list all the templates with the names.
    Note, The Template and LocaleId parameters must be a valid combination as returned from the Get-SPOWebTemplate cmdlet.
    Also check
    http://stackoverflow.com/questions/21268629/creating-new-site-collection-in-office-365-from-an-app
    If this helped you resolve your issue, please mark it Answered

  • Hi what is the transaction code for vendor master delete

    hi
       what is the transaction code for vendor master delete? and customer master delete?
    thank u
    surya

    Hi
    There won't be any Deleting of customer and vendor completely
    we only BLOCK them
    FK05                   Block Vendor (Accounting)
    MK05                   Block Vendor (Purchasing)
    XK05                   Block Vendor (centrally)
    FD05                   Block Customer (Accounting)
    VD05                   Customer Block (Sales)
    XD05                   Block customer (centrally)
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • HT1918 what is the postal-code for lebanon ? I cand find it :(

    what is the postal-code for lebanon ? I cand find it

    From a quick search, some of the results that I've found seem to imply that Lebanese addresses can have postal codes, which consist of 8 numbers - the first 4 for the region, the second 4 for the building. Are you being forced to enter a post code ?
    What sort of visa card are you trying to add, debit or credit ? If it's a debit card then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined
    If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management

  • What is the ok code for Save (to post a document)

    Hi all Technos
    How to post a document(Save it) in BDC In Tr Code F-02 after all entry? What is code for that.
    In simple what is the ok code for SAVE. For your kind infromation ENTER is not taking.
    Plz any body help me For that.
    Every usefull answer will be rewarded with points..
    Thanks in advance
    shovan

    Hi Shovan,
    OK-code for save is =BU
    Check this recording..Award points if useful
    perform bdc_dynpro      using 'SAPMF05A' '0100'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BKPF-BLDAT'
                                  '06.05.2008'.
    perform bdc_field       using 'BKPF-BLART'
                                  'SA'.
    perform bdc_field       using 'BKPF-BUKRS'
                                  'BP01'.
    perform bdc_field       using 'BKPF-BUDAT'
                                  '19.05.2008'.
    perform bdc_field       using 'BKPF-MONAT'
                                  '5'.
    perform bdc_field       using 'BKPF-WAERS'
                                  'USD'.
    perform bdc_field       using 'FS006-DOCID'
    perform bdc_field       using 'RF05A-NEWBS'
                                  '40'.
    perform bdc_field       using 'RF05A-NEWKO'
                                  '630020'.
    perform bdc_dynpro      using 'SAPMF05A' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BSEG-WRBTR'
                                  '100'.
    perform bdc_field       using 'BSEG-MWSKZ'
                                  'I0'.
    perform bdc_field       using 'BSEG-TXJCD'
                                  'ca0000000'.
    perform bdc_field       using 'DKACB-FMORE'
                                  'X'.
    perform bdc_dynpro      using 'SAPLKACB' '0002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTE'.
    perform bdc_field       using 'COBL-KOSTL'
                                  '1201'.
    perform bdc_dynpro      using 'SAPMF05A' '0700'.
    perform bdc_field       using 'BDC_OKCODE'
                                  *'=BU'.* 
    Thanks,
    Rvaee..

  • What is the transaction code for see the Web Services available in SAP

    Hi
    I came to know that SAP has provided its own webservices... I need some information on that... If any one has documentation on that can u please send it to me... My ID is <b>[email protected]</b>.
    What is the trasaction code for see the web services available in SAP.... Can any one help.. Please its  urgent
    Best Regards
    Ravi Shankar B
    Message was edited by:
            RaviShankar B

    Hi,
    you can find Web Services (Enterprise Services) in the Enterprise Services Workplace (ES Workplace). The ES Workplace allows you to explore, test, and use enterprise services to make enterprise SOA tangible. Here, you will find all of the currently productized enterprise services by SAP.
    Best Regards,
    Boris Mueller
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/esa/esapreview">ES Workplace at SDN</a>
    <a href="http://esapreview.sap.com:82/socoview(bD1kZSZjPTgwMCZkPW1pbg==)/flddisplay.asp">ES Workplace</a>

  • What is the t-codes for transport Organizer

    what is  the t-codes for transport Organizer

    STMS - and with SE16, Table TSTCT you can look up any other transaction code in R/3.
    Rgds.

  • What is the T-Code for creating Cost center - profit center standard hierar

    Hi,
    What is the T-Code for creating Cost center - profit center standard hierarchy.Please provide me the T-codes.
    Thanks

    Hi Supriya,
    Create / Change Cost Center Standard Hierarchy - OKEON
    Display Cost Center Standard Hierarchy - OKENN
    Create Profit Center Standard Hierarchy - KCH1
    Change Profit Center Standard Hierarchy - KCH5N
    Display Profit Center Standard Hierarchy - KCH6N
    Srikanth Munnaluri

Maybe you are looking for

  • HP IPAQ C310 died in less then 20 days.

    I called Hp customer service on the 20th of July after i got back from vacation, because on my way down to my vacation place my GPS died. On my return i called HP customer service who told me I am sorry you are over the 21 days. I advised them i was

  • I have a 16 page document which I was told someone else was working on. Not possible! How do I get permission to open it ?

    I am compiling my Ancestry and today I was told I couldn't open it. The reason I was given is written above. I am the only one with my history who has the access to work on my family history. I then tried to get a copy made and WORD told me it was un

  • My phone wants to restore, yet not sure if backed up? Any ideas?

    Have tried to give phone ios7 but now phone won't update, or turn on, wants to restore to factory settings and loose all info, which don't want to do

  • SRM  MDM catalog link not working

    Dear All, I am from SAP Basis background. Currently we have a project to go live on internet. Hence we are changing our link to internet links. We are currently facing some concerns for MDM Catalog. We have updated correct URL of internet in SAP Impl

  • JVM threads BLOCKED

    Hi, One of our java application stopped responding. In the thread dump it is observed that JVM threads like "GC Daemon", "Low Memory Detector" etc are found to be in BLOCKED state. Also our application threads got blocked. I really wonder why JMV thr