What is the process flow for Asset Acquisation without PO in CIN environmen

Hi,
I need to do Asset Acquisation without PO (Directly through F-91) scenario in CIN environment.
Kindly help me on *how to proceed with Direct Asset Acquisation without PO. How can i capture excise invoice for this scenario.
When i am doing direct acquisation of asset thru F-91, how can i capture excise invoice?
Thanks
KB

HI,
This is not possible to update excise data while aquiring assets through FI......
Because SAP has clearly mentined that if you want to avail CIN functionality then MM and SD modules must have been implemented.....
System has copy control from GR to Excise invoice so better aquire asset though PO so that you can update register RG23C Part I and Part II.
Regards,
Chintan Joshi

Similar Messages

  • What is the proces flow for calibration equipement management

    Hello,
    Please can some explain the Process flow for the equipment management?
    We want to schdule the order for the calibration equipement.
    Gaurav

    Please follow the following prcoess flow
    IA05- Create General Task list(Enter inspection point :300,operation,inspection charactertics to the operation,usage)
    IP01-Create plan( Use maintenace startegy of plant,enter equipment, select general task list for plan the equipment,enter call horizon,planning cycle schduling period)
    IP42-Schedule the plan Schedule the plan for the quantity with frequency defined in the plan.Which schdule the according to the schdule date.Schedule date generates pm order for the plan on due date.
    IW33-Display order.
    QE51-Calibration result recording for equipment- Gives status for result i.e ok or not ok.
    QA11-Lot usage decision
    IW41-Confirmation for the order.
    You can refer the sap librabary for detailed process.
    Regards,
    Sunil Patil

  • What is the process code for Message type FUNDMA

    Hi,
    I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
    Thanks
    William

    Check entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
    Hope this helps.
    ashish

  • What is the process code for message type FIXEDASSET_CREATE?

    Hi all
    please tell me that what is the process code for
    MESSGAE TYPE = FIXEDASSEt_CREATE,
    FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
    BASIC TYPE = FIXEDASSET_CREATE01 ?
    thanx in advance.......
    Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
    Edited by: Prachi Sharma on Jan 11, 2008 8:03 AM

    Hi,
    Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
    Check below Tables as well
    EDE1T
    EDE2T
    EDE5T
    EDE6T
    TEDE5
    TEDE6
    Regards,
    Satish

  • Can anyone give me the process flow for MTBF report?

    hi all
        can anyone give me the process flow of MTBF Report?
    regards
    asha

    And Full form of MTBF is ???
    Regards
    Amitava

  • What is the process flow in MRP - MD61+MD01,MD02+MD04+COR7

    Hi experts,
    I need one clarification for Material requirment planning ( MRP - Process industries )
    My company is newly implemented in SAP so i want some clarification in MRP side.  My company flow is 3 rd level converted of FG.
    1 st level - Raw paint - Samifinished
    2 nd level - Tin condition - Samifinished
    3 rd level - Case condition - FG
    I have raised PIR in MD61 at FG code, after MRP Run planded order created at three level ( 1 st, 2nd, 3rd - level)
    But what is the t.code used is correct recording MRP Run - MD01( Plant level ) OR MD02 ( Single item)
    what is the t.code used for over all requirment Bill of material list ( ROH & VERP)at plant based recording purchase the material.
    Kindly pls explain the flow for PIR > MRP RUN>STOCK RECUIRMENT LIST> PLANNED ORDER TO PROCESS ORDER>
    Thanks,
    Umapathy

    Hi,
    To proceed further you should firm confirm that below master data properly maintained in your system,
    - Create BOM - CS01
    - Create Resource - CRC1
    - Create Master Recipe - C201
    Now your business process starts with the requirements created in the system e.g. by MD61 in your case
    Now you can run the MRP by MDBT/MD01/MD02 for your case. It is suggested to go with MD02 for better understanding on MRP behavior for single FG material.
    Now You can analyze the MRP result for single FG material in MD04 transaction wherein you will get the planned order created through MRP run and also the order report for planning of below level components of BOM
    Then you can further proceed for Production Execution with the help of below transactional steps:-
    - COR1 - Create Process Order Manual
    - COR7 - Convert Plan Order to Process Order
    - COR6N/CORZ/CORR - Order Confirmation
    - CORS - Cancel Confirmation
    - CORT - Display Confirmation
    - CO53 - Control Recipe Monitor (Optional)
    - CO55/CO60 - Maintain PI Sheet (Optional)
    - CO54 - Process Massage Monitor (Optional)
    - MB31 - Goods Receipt For Order
    - COIK / MB1A / MIGO :- Goods Issue
    - KKS1/KKS2 - Calculate Varience
    - CO88 - Actual settlement
    - COOISPI - Order Information System
    You can see the all PR created through MRP in ME5A transaction by selecting the Creation Indicator as B for MRP as shown in below screen,    
    And for rest of analysis you can use COOISPI report.
    Regards,
    Narresh

  • What is the Process code for IDoc SISCSO01

    Hi all,
    I am using 4.6c version.
    I am going for an outbound IDoc SISCSO01 for sales Order confirmation.
    I want the process code (we41) which suits this IDoc SISCSO01.
    Can you please help to get the process code so that my IDoc can be sent succesfully.
    Best Regards,
    Gangolu

    Hi Gangolu,
    I don't think there is an outbound process code for IDoc type SISCSO01.
    But you can generate the IDoc with this FM <b>MCV_STATISTICS_ALE_OUT_ORDER</b>. But you still need to setup partner profile, distribution model and etc.
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • DW CS5 - what determines the font specs for design view (without Live View on)?

    Says it all above. The non-Live View font I get bears no relationship to the font spec'd (and displayed) for the page in Live View. I assume I have a preference set wrong but can't find it.Help appreciated. - Jim

    You won't see any custom web fonts in Design View, if that's what you mean.  Design View is not and never has been 100% reliable because it is not a browser.  At best Design View is an approximation of what you can expect to see in some browsers.
    Nancy O.

  • Process flow for the Mid-year Status Changes based upon the Qualifying Even

    Hi Experts,
    I'm looking some information for the process flow for the Mid-year Status Changes based upon the Qualifying Events. Basically, I need to know, what would be the impact of these changes on various info types (Via IT0014 - Deduction changes & so forth) and the things that needs to be considered during it's Configuration and the things that needs to be checked due to the occurrence of the change. I would greatly appreciate any kind of help/document.
    Thanks a bunch in advance,
    Thanks,
    Exertive.

    Hello guys,
    Can anyone has any kind of input on this? Basically, I need to know the procees for Mid-year status changes based upon Qualified events. Any kind of help is greatly appreciated.
    Thanks,
    Exertive.

  • REM process flow for food manufacturing.

    Hallo,
    I want to know what is the process flow in SAP REM  for food manufacturing compony?
    Thx
    Nikam.D.A

    Dear Dev,
    Check these links for the REM flow along with the T Codes,
    Repetitive Manufacturing
    REM Cycle..........
    Regards
    Mangalraj.S

  • Process flow for customer services

    Hi ,
    I want to know the process flow for customer services.Means when customer return the product for repair or replacement,then how we run the complete process in system.What is the various tcode for this process.
    Please ASAP
    Regards
    Prabudh

    Have a look at this [link|http://help.sap.com/saphelp_crm40/helpdata/en/b0/87e20ee4f20148acc496c5525f4399/content.htm] if it for any help. couldn't find anything better
    Regards

  • Process Flow for Subcontracting

    I need help in the process  flow for Subcontracting
    With Regards
    Maya

    Please have a look at the building block '442 RFQs for Project-based Procurement' and '443 Purchase Orders for Project-based Procurement' of the SAP Best Practices for Engineering, Construction, and Operations SAP Best Practices for Engineering, Construction, and Operations U.S - V1.604 (SAP Best Practices for Engineering, Construction, and Operations – SAP Help Portal Page).
    Best regards,
    Maria

  • Process flow for Maintenance Event Builder integrated with PS

    Dear EAM  Master ,
    Good Day. Can anyone show me how's the process flow for Process flow for Maintenance Event Builder integrated with PS.
    Appreciate.
    Thank you.

    [SAP Help|http://help.sap.com/erp2005_ehp_05/helpdata/en/d7/d0b83a47d0c649e10000000a114084/frameset.htm]
    Thanks
    Narasimhan

  • Regarding the process flow

    Hi All,
    My client is asking the process flow for the following scenarios can any one help me by providing the procees flow
    1.Depot Import Material Return Process
    2. Depot FOC process.
    3.Depot purchase return process.
    4. High sea Sales Config (if anything in SAP).
    Regards
    sunil

    Dear Murali,
    Welcome to PS World.
    See link which is given by Venkat Sir.(It shows process)
    Its very tough to explain whole process.
    Plz refer this link.
    Deffntly it will help you.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
    PS cycle
    Re: Enterprise structure for PS
    Re: Why we use Project system?
    Regards
    Chandra

  • HELLO, i HAVE MY ITUNES ON AN OLDER COMPUTER, JUST PURCHASED A NEW LAP TOP... WHAT IS THE PROCESS TO LOG ON TO MY ITUNES AN USE THE NEW COMPUTER AN DNOT LOSE WHAT i HAVE ALREADY PURCHASED? THANKYOU VERY MUCH... i AM A NEW IPOD USER AND iAM OLD

    hELLO i HAVE A NANO IPOD... A NEW USER OF IT AND iTUNES... HAVE MY ITUNES ON MY OLD COMPUTER... JUST PURCHased a  NEW LAP TOP. WHAT IS THE PROCESS OF ACCESSING THAT ACCOUNT WITHOUT LOSING EVERYTHING OR REPURCHASING SONGS.
    THANK YOU VERY MUCH... i AM OLD AND NOT TECHNOLGY SAVVY!

    Hi Mary,
    Here is an Apple Support link that provides all options for moving your iTunes Library to a new computer as well as full instructions for completing the one you select:
    http://support.apple.com/kb/HT4527
    Hope this helps!
    Gail

Maybe you are looking for

  • Bug in Agilent 34401 LabVIEW driver?

    I was surprised when I tried to use this driver in a larger application. One of my other drivers puts a warning about "more data may be available" and when fed into the Read Single Point.vi of this driver it results in a full blown time out error mes

  • Prerequisites in ERP 6.0 for SAP NW BW 7.3

    Hi All, We are going to install SAP Netweaver BW 7.3 in 1 or 2 days. I just wanted to know the prerequisites for ERP 6.0 and BO 4.0 to connect with BW 7.3. I tried searching for that but not able to get the details. Kindly suggest. Regards, Sreekanth

  • Which Part of windows 7 should I use for Playing games.

    I have heard that Windows 7 Home Premium is best For playing games can you tell me which one should I install in my MacBook Pro & Please give me the link For it...

  • Keynote '08: Can I edit narration?

    The Keynote help seems to indicate that a narration can only be added or deleted, not edited. I didn't think this would be a problem, then actually tried to narrate without errors through a bunch of slides... it takes some practice. Anyway, if I was

  • How to Find the coordinates of blister

    hi   i want to find the edge coordinates of blister of image attached   Plz tell whether it can be calculated Regards Abhishek Verma Attachments: 13.jpg ‏2305 KB