What is the process for getting my host e-mail settings added to Mail Assistant?

Can someone point me in the right direction?  My understanding is that Mail.app's auto-account detection process grabs e-mail account settings from a database managed by Apple, not from public DNS.  If that is correct, what would be the process by which I could submit the e-mail account settings associated with my domain, so that both Mail.app's auto-account detection and Mail Assistant (the web tool) will populate the settings correctly?
Thanks,
Jeff Cohen

Are you trying to create the account in Mail or import mailboxes? Doing what you did won't create an account, it'll just try to import a mailbox. To create an AOL account in Mail, see:
http://about.aol.com/faq/openmailaccess#MacOSX
and:
http://members.aol.com/adamkb/aol/mailfaq/imap/applemail.html

Similar Messages

  • What are the prerequisite for getting MTTR / MTBR data.

    Dear SAP Experts,
    I want to know what are the prerequisite for getting MTTR / MTBR data.
    Regards
    ERP Tech

    Pre-requisites are:
    Maintain Start date in Equipment / Functional location master
    Maintain the Malfunction Start date & time, Malfunction End Date & time in Notification
    Maintain the Breakdown tick mark in notification
    Maintain update group (stats) in Notification type configuration (IMG - Plant Maintenance & Customer Service - Maintenance & Service Processing - Maintenance & Service Notifications - Notification types - Define Notification types)

  • What is the process for SQL Server 2005 patch update

    hi,
    i have 2 production SQL Server2005  Database servers in cluster ,
    what is the process for applying patches.
    Saidireddy

    In 2005 you can do it in two ways...
    Method 1 :
    With SQL Server 2005,
    when you start installing cluster service pack (or hotfix), it must be launched on the active node(node
    that hosts the instance). When installing the Setup will launch simultaneously  "remote silence" on all passive nodes. All nodes in the cluster containing the SQL Server instance are updated in the same time.
    Method 2: First you can install in passive node then you can install in the active node, In this way you can save your down time ( If you start in the active node it will check in the passive, and if its installed already then it skips that
    and start applying in the active node ), but most of the DBA's follows only first method because they may not aware of this or just they follows Microsoft common method. 
    SQL 2008 and Later....
    1.  Apply the hotfix on pasive node N2
    2.  Reboot the passive node N2
    3.  Failover on SQL resource : the passive node become the active node
    4.  Apply the hotfix on the passive node N1
    5.  Reboot the passive node N1
    Raju Rasagounder Sr MSSQL DBA

  • What is the process for transferring 2 lines from separate family plans and joining them in their own share plan?

    I am part of a family plan (not the owner) and my boyfriend is part of a family plan, also not the owner of it.  We would like to transfer both of our phones out of our family plans and do our own share plan together. What is the process for this??

    Have each of the account owners contact Verizon to let them know that you will be doing an AOL on your lines. Then you call Verizon and explain what you want to do. Just that easy. But understand you'll have to get the new Share everything plan.

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • What is the process for connecting ethernet.  Have ethernet cable connected to stereo received for internet radio and Blue Ray. However Network System Preferences indicates ethernet not connected and has red dot to left.  Note Airport wireless is working.

    What is the process for connecting airport extreme ethernet?  I have ethernet cables connected to stereo receiver for internet radio and another to blue ray player.  The system preference network indicates "ethernet not connected" with red dot to left of this message.  The airport wireless works and has green dot to left of it.  The stereo receiver and blue ray player do not respond and give message not connect to internet.  Thank you.  /  cfpirate 

    It worked for me finally. I took out the DNS numbers in airport admin utility, and restarted the airport express. I do not remember putting the DNS numbers in, I wonder from where the airport express got those numbers.
    After restarting, it worked.
    Thanks!

  • What are the procedures for getting Apple to remotely wipe all my data off my ipad that was stolen? I have no hope of recovering it. Please advise asap...thanks!

    What are the procedures for getting Apple to wipe the data off my original ipad I bought two years ago. I had it stolen from a hotel room over the weekend and it is not password protected and no I did not download app to find it.
    Any hwlp would be greting appreciated!

    Apple can't do it, only you could potentially do it if you had enabled Find My iPad on it before it was stolen.
    If it was stolen then you should report it to the police. As a safety precaution you should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

  • Can I know what is the process for us to do Good Return from customer?

    Can I know what is the process for us to do Good Return from customer?

    hi
    this ques need to be posted in sd forum..
    to answer this u can use order type RE to create Return order and then u can do the goods receipt..
    or u can use the process mentioned in first reply.
    regards
    CMM

  • What is the password for "Get Text Rect.vi"

    What is the password for "Get Text Rect.vi"  I need it to add a password to my code, which uses this error handler provided by LV.
    Tim Burroughs
    email:[email protected]
    email:[email protected]

    That is a an NI VI and they will not give you the password.
    When saving your VI makes sure you UN-CHECK the "Include vi.lib files" option.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • What is the process for rollout projects and upgradation projects

    Hi All,
    Hope you all are doing well.
    I am a new bee in oracle apps. Just would like to understand  what is the process for rollout projects and upgradation projects and difference between them.
    Please help me. Thanks in advance.
    Regards,
    MM

    Don't know which phone do you use but if you configure your Exchange ActiSync Profile on your Phone there is an option for the CONTACTS. Basically Exchange account will pull the contacts from your profile.. I did test it on my iPhone 5 and works for mee
    Where Technology Meets Talent

  • What is the process for MM and asset account a/c and FI

    what is the process for MM and asset account a/c and FI
    Regard's
    VYadav

    Dear,
    There are below steps involved...
    1. Create purchase requisition..
    2. Create purchase order from above or you can directly creating it. Make sure you are entering A in account assignment category..
    3. Do the GR of asset based on PO created in step 2 in transction MIGO..
    4. Pass the invoice in MIRO.
    5. Make payment.
    6. Clear the vendor account...
    Result is Asset is aquired......
    Regards,
    Chintan Joshi

  • What is the Process for setting up smart view

    what is the Process for setting up smart view

    hehehe ..... cant stop it :)
    @next level ::try this
    Re: Smart View configuration
    apart from this try giving point the people who post answers to u .. :) so that they will reply ur post or question which u ask now days non stop...try to minimize ur qs in single post it would be better

  • What is the process for recording vinyl records into iTunes using the Sony USB Turntable?

    What is the process for recording vinyl records into iTunes using the Sony USB Turntable?

    What is the process for recording vinyl records into iTunes using the Sony USB Turntable?

  • What is the process for adding customize coponent in palette of VE eclipse

    Hi ,
    I use our own enhaunced components for our applications inherited from standard swing components.
    so I need to put our own components into the palette of the visual editor to simply add them to the design.
    what is the process for this ?.
    Thanks.

    Hi,
    you have to create a plugin for that.
    See http://dev.eclipse.org/viewcvs/indextools.cgi/org.eclipse.ve.examples/org.eclipse.ve.example.customwidget/WebContent/index.html
    - Michael

  • What's the bapi for getting document details ?

    hi,
    i'm trying to do F-22 things through BAPI, but there's one field in some screen that i can't find relative field in any structure of BAPI para., so i tried to get the details of the document created by F-22 to find where the field i'm looking for is stroed.
    so would you please tell me the bapi for getting document info.?
    thanks!

    Hi,
    Have you solved your problem?
    If not:
    Have you tried to debug your application and see what you have in your object just after doing GetByKey?
    The GetByKey method returns true if it founds the object, false if the key does not exist.
    In the DI Help File it is specified the key for a payment is the DocEntry...
    Regards
    Trinidad.

Maybe you are looking for