What is the process for rollout projects and upgradation projects

Hi All,
Hope you all are doing well.
I am a new bee in oracle apps. Just would like to understand  what is the process for rollout projects and upgradation projects and difference between them.
Please help me. Thanks in advance.
Regards,
MM

Don't know which phone do you use but if you configure your Exchange ActiSync Profile on your Phone there is an option for the CONTACTS. Basically Exchange account will pull the contacts from your profile.. I did test it on my iPhone 5 and works for mee
Where Technology Meets Talent

Similar Messages

  • What is the process for sharing calenders and contacts via a company cell phone

    Hi
    how do you share Outlook calendars and contacts using a company cell phone...currently we are sharing using Outlook in the office using MS Exchange Server.
    do you have any suggestions?thank you!

    Don't know which phone do you use but if you configure your Exchange ActiSync Profile on your Phone there is an option for the CONTACTS. Basically Exchange account will pull the contacts from your profile.. I did test it on my iPhone 5 and works for mee
    Where Technology Meets Talent

  • What is the process for connecting ethernet.  Have ethernet cable connected to stereo received for internet radio and Blue Ray. However Network System Preferences indicates ethernet not connected and has red dot to left.  Note Airport wireless is working.

    What is the process for connecting airport extreme ethernet?  I have ethernet cables connected to stereo receiver for internet radio and another to blue ray player.  The system preference network indicates "ethernet not connected" with red dot to left of this message.  The airport wireless works and has green dot to left of it.  The stereo receiver and blue ray player do not respond and give message not connect to internet.  Thank you.  /  cfpirate 

    It worked for me finally. I took out the DNS numbers in airport admin utility, and restarted the airport express. I do not remember putting the DNS numbers in, I wonder from where the airport express got those numbers.
    After restarting, it worked.
    Thanks!

  • What is the process for MM and asset account a/c and FI

    what is the process for MM and asset account a/c and FI
    Regard's
    VYadav

    Dear,
    There are below steps involved...
    1. Create purchase requisition..
    2. Create purchase order from above or you can directly creating it. Make sure you are entering A in account assignment category..
    3. Do the GR of asset based on PO created in step 2 in transction MIGO..
    4. Pass the invoice in MIRO.
    5. Make payment.
    6. Clear the vendor account...
    Result is Asset is aquired......
    Regards,
    Chintan Joshi

  • What is the process for transferring 2 lines from separate family plans and joining them in their own share plan?

    I am part of a family plan (not the owner) and my boyfriend is part of a family plan, also not the owner of it.  We would like to transfer both of our phones out of our family plans and do our own share plan together. What is the process for this??

    Have each of the account owners contact Verizon to let them know that you will be doing an AOL on your lines. Then you call Verizon and explain what you want to do. Just that easy. But understand you'll have to get the new Share everything plan.

  • Can I know what is the process for us to do Good Return from customer?

    Can I know what is the process for us to do Good Return from customer?

    hi
    this ques need to be posted in sd forum..
    to answer this u can use order type RE to create Return order and then u can do the goods receipt..
    or u can use the process mentioned in first reply.
    regards
    CMM

  • What is the process for SQL Server 2005 patch update

    hi,
    i have 2 production SQL Server2005  Database servers in cluster ,
    what is the process for applying patches.
    Saidireddy

    In 2005 you can do it in two ways...
    Method 1 :
    With SQL Server 2005,
    when you start installing cluster service pack (or hotfix), it must be launched on the active node(node
    that hosts the instance). When installing the Setup will launch simultaneously  "remote silence" on all passive nodes. All nodes in the cluster containing the SQL Server instance are updated in the same time.
    Method 2: First you can install in passive node then you can install in the active node, In this way you can save your down time ( If you start in the active node it will check in the passive, and if its installed already then it skips that
    and start applying in the active node ), but most of the DBA's follows only first method because they may not aware of this or just they follows Microsoft common method. 
    SQL 2008 and Later....
    1.  Apply the hotfix on pasive node N2
    2.  Reboot the passive node N2
    3.  Failover on SQL resource : the passive node become the active node
    4.  Apply the hotfix on the passive node N1
    5.  Reboot the passive node N1
    Raju Rasagounder Sr MSSQL DBA

  • I would like to make an upgrade from creative suite cs5 to cs6 what is the price for student edition and what i have to do, i do not found in your website price

    i would like to make an upgrade from creative suite cs5 to cs6 what is the price for student edition and what i have to do, i do not found in your website price

    There are no upgrades for student editions. You simply buy a fresh license at the discounted price.
    Mylenium

  • What is the Process for setting up smart view

    what is the Process for setting up smart view

    hehehe ..... cant stop it :)
    @next level ::try this
    Re: Smart View configuration
    apart from this try giving point the people who post answers to u .. :) so that they will reply ur post or question which u ask now days non stop...try to minimize ur qs in single post it would be better

  • What is the process for recording vinyl records into iTunes using the Sony USB Turntable?

    What is the process for recording vinyl records into iTunes using the Sony USB Turntable?

    What is the process for recording vinyl records into iTunes using the Sony USB Turntable?

  • What is the process for adding customize coponent in palette of VE eclipse

    Hi ,
    I use our own enhaunced components for our applications inherited from standard swing components.
    so I need to put our own components into the palette of the visual editor to simply add them to the design.
    what is the process for this ?.
    Thanks.

    Hi,
    you have to create a plugin for that.
    See http://dev.eclipse.org/viewcvs/indextools.cgi/org.eclipse.ve.examples/org.eclipse.ve.example.customwidget/WebContent/index.html
    - Michael

  • What is the role of an abaper in upgradation project from 4.7 to ecc6.0?

    Hi anybody pls forward  any documentation and ppts to understand the upgradation project
    What is the role of an abaper in upgradation project from 4.7 to ecc6.0?
    what we have to check and we have to upgrade give some guidance
    thanks in advance.

    Hi,
    check the below link..
    http://www.thespot4sap.com/upgrade_guide_v2.pdf
    reward if helpfu.
    Regards,
    Nagaraj

  • What's the best solution Unicode Conversion and Upgrade on AS 400

    Hi Guys,
    We have a R/3 4.6C system on AS400 server. Within this year, we' like to change hardware and DB vendor (Oracle), in the meantime we also need to perform the UC and upgrade to ECC6.0.
    What 's the best scenario? we have below suggestions.
    1
    Step1 - Heterogeneous migration and perform UC to new server and DB in one migration (export / import)
    Step2 - Upgrade ECC6.0 Unicode
    (not sure about this solution, is Unicode conversion to  4.6C without upgrade possible?????)
    2
    Step1 - Heterogeneous migration to new server and DB
    Step2 - UC&UP
    3
    Step 1 - Heterogeneous migration to new server and DB
    Step 2 - Upgrade to ECC non-unicode
    Step3 - Unicode conversion to ECC unicode
    ????? which is better? 2 big question
    - is Unicode conversion to  4.6C without upgrade possible?????)
    - what's the difference between UC&UP and upgrade first and perform UC later, which is better?
    Thanks very much
    Lin
    Edited by: ye zhulin on Mar 8, 2010 9:53 AM

    Hi Lin,
    I assume you have an EBCDIC database at the moment.
    Point 1 is not possible, since 4.6C is not supported with Unicode.
    The difference between CU&UC and a separate Upgrade and a later Unicode conversion is that CU&UC is done in one downtime. However you need to evaluate whether this is possible with your downtime requirements.
    My recommendation would be to do the Migration and after that the CU&UC approach (if this is possible in a feasible downtime window - this is highly dependent on your system size / downtime requs / hardware capabilities).
    Best regards,
    Nils Buerckel
    SAP AG
    Edited by: Nils Buerckel on Mar 8, 2010 10:34 AM

  • What is the use for lock object and how to use the lock objects

    Hi Guru's,
    I am new to ABAP .Can you please clarify the that what is the use of lock object and how to use the loct object .what is use of the Deque & Enque  function modules .

    hi ,
    below are some minfo about lock objects :
      Lock Objects
    These types of objects are used for locking the access to database records in table. This mechanism is used to enforce data integrity that is two users cannot update the same data at the same time. With lock objects you can lock table-field or whole table.
    In a system where many users can access the same data, it becomes necessary to control the access to the data. In R/3 system this access control is built-in on database tables. Developers can also lock objects over table records.
    To lock an object you need to call standard functions, which are automatically generated while defining the lock object in ABAP/4 dictionary. This locking system is independent of the locking mechanism used by the R/3 system. This mechanism also defines LUW i.e. Logical Unit of Work. Whenever an object is locked, either by in built locking mechanism or by function modules, it creates corresponding entry in global system table i.e. table is locked. The system automatically releases the lock at the end of transaction. The LUW starts when a lock entry is created in the system table and ends when the lock is released.
    Creating Lock Objects
    Lock object is an aggregated dictionary object and can be defined by using the following steps:
    o From initial data dictionary screen, enter the name for the object, Click Lock object radiobutton and then click on Create. The system displays a dialog box for Maintain Lock Objects screen
    o Enter short text as usual and the name for primary table.
    -Save
    -Select Tables option
    From this screen you can:
    Select secondary tables, if any, linked by foreign key relationship.
    Fields for the lock objects. This option allows you to select fields for objects (R/3 system allows locking up to record level). Lock object argument are not selected by user but are imposed by the system and includes all the primary keys for the table.
    1) Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
    2) Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
    3) Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
    Also, last but not the least, locking the object is logical (locking with any enqueue ) .so, you have to use the lock object while trying to access from second program .
    reward if helpful ,
    Regards,
    Ranjita

  • What are the settings for apn data and mms for iphone 4 on straight talk?

    what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

    They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
    Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
    You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
    It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
    Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

Maybe you are looking for