What is the program name to update vbrp and ce1beka tables

Hi experts,
                when i do vf01 transaction and i press save then the table ce1beka and the table vbrp is updating.How i can find from which program these tables are updating.Is it possible to check in sql trace?.from where the data is coming to those tables. please help me.
Thanks.

Hi Bharat,
For any given transaction you can find the relevant program very easily.
Enter the Tcode in command prompt.Goto menu path System->Status.
In SAP data section you can view the Tcode and the corresponding Program name.
For Tcode: VF01, the program name is SAPMV60A.
Also, using Tcode: SE49, you can see what are the tables being updated through a program or transaction.
Hope this helps.
Please reward if helpful.
Thanks,
Srinivas

Similar Messages

  • What is the program name which extend the partitions in BW 3.5 ?

    Hi All..
    What is the program name which extend/split the partitions in BW 3.5 ?
    Thanks..
    Saj

    Hope It's not too late,
    You might be talking about the program described in note "697275":
      - SAP_EXTEND_PARTITIONING_INF for INFORMIX databases.
    There's also a possibility described in note "895539":
      - SAP_PART_EXTEND_ETABLE  for ORACLE databases.
    Good Luck!
    Edited by: Martin St-Jean on Dec 3, 2009 5:07 PM
    Edited by: Martin St-Jean on Dec 3, 2009 5:20 PM

  • What is the programming (ABAP) difference between Unicode and non Unicode?

    What is the programming(ABAP) difference between Unicode and non Unicode?
    Edited by: NIV on Apr 12, 2010 1:29 PM

    Hi
    The difference between programming in Unicode or not Unicode is that you should consider some adjustments to make on the Program "Z" to comply with the judgments Unicode Standard.
    In the past, developments in SAP using multiple systems to encode the characters of different alphabets. For example: ASCII, EBCDI, or double-byte code pages.
    These coding systems mostly use 1 byte per character, which can encode up to 256 characters. However, other alphabets such as Japanese or Chinese use a larger number of characters in their alphabets. That's why the system using double-byte code page, which uses 2 bytes per character.
    In order to unify the different alphabets, it was decided to implement a single coding system that uses 2 bytes per character regardless of what language is concerned. That system is called Unicode.
    Unicode is also the official way to implement ISO/IEC 10646 and is supported in many operating systems and all modern browsers.
    The way of verifying whether a program was adjusted or not, is through the execution of the UCCHECK transaction. Additionally, you can check by controlling syntax (making sure that this asset verification check Unicode).
    The main decisions to adjust / replace are (examples):
    ASSIGN H-SY-INDEX TEXT TO ASSIGN <F1> by
    H-SY-INDEX TEXT (*) TO <F1>.
    DATA INIT (50) VALUE '/'. by
    DATA INIT (1) VALUE '/'.
    DESCRIBE FIELD text LENGTH lengh2 by
    DESCRIBE FIELD text LENGTH lengh2 in character mode.
    T_ZSMY_DEMREG_V1 = record_tab by
    record_tab TO MOVE-Corresponding t_zsmy_demreg_v1.
    escape_trick = hot3. by
    escape_trick-x1 = hot3.
    itab_txt TYPE wt by
    ITAB_TXT TYPE TABLE OF TEXTPOOL
    DATA: string3 (3) TYPE X VALUE B2023 '3 'by
    DATA: string3 (6) B2023 TYPE c VALUE '3 '.
    OPEN DATASET file_name IN TEXT MODE by
    OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING NON-UNICODE.
    or
    OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    CODE FROM PAGE TRANSLATE a_codepage record by
    record TRANSLATE USING a_codepage.
    CALL FUNCTION 'DOWNLOAD' by
    CALL METHOD cl_gui_frontend_services => gui_download
    CALL FUNCTION 'WS_DOWNLOAD' by
    CALL METHOD cl_gui_frontend_services => gui_download
    CALL FUNCTION 'UPLOAD' by
    CALL METHOD cl_gui_frontend_services => gui_upload
    CALL FUNCTION 'WS_UPLOAD' by
    CALL METHOD cl_gui_frontend_services => gui_upload
    PERFORM USING HEAD APPEND_XFEBRE +2. by
    PERFORM USING HEAD APPEND_XFEBRE +2 (98).
    Best Regars
    Fabio Rodriguez

  • What is the exact purpose of Transaction NACE and NAST Table?

    Hi All,
    What is the exact purpose of Transaction NACE and NAST Table?
    Pls help me…
    Akshitha.

    Hi
    When a Output type in an apllication doc is configured with a Medium, Partner, Lang and other communication paramters an entry is created in NAST table
    so to trigger the output an entry in NAST is compulsory
    Output is a link between the Driver Program and the Sapscript,
    An output type summarizes messages of the same meaning. It contains parameters that are valid for all its assigned messages, for example appropriate partner functions.
    Transmission medium is a medium which the layout will be come out, this may be printout, Fax or Mail
    Check this link.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/19884743b111d1896f0000e8322d00/content.htm
    ex-how to config output type.
    You will assign output types using Transaction NACE.
    Do the follow steps to assign output type
    1)Select Application Type V2 which will have description Shipping.
    2)Click on Output types button.
    3)Go to change mode by pressing Ctrl+F4.
    4)Select one output type which already exists
    5)Do Copy As(F6)
    6)Give your output type against Output Type field.
    7)Under General data Tab, Give Program and Form routine and Save the data.
    i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
    Check the following documentation
    In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
    If suppose data can be read from EDI then we should go for condition records.
    So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
    Go to the Transaction NACE.
    choose the related sub module.. like billing or shipping
    doubel click on Output Types
    Choose the Output Type for which whcih you wanted your script to trigger
    Then select the Output Type and double click on Processing Routine
    Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
    Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
    Device Types for SAP Output Devices (Detail Information)
    Definition
    The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
    The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
    You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
    How do I choose the correct device type?
    • In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
    These standard device types are completely defined and need no modification or extension before you use them in device definitions.
    • You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
    • Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
    • Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
    • If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
    Attributes of a Device Type
    A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
    • Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
    • Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
    • Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
    • Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
    • Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
    • Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
    Reward points for useful Answers

  • What is the Program name to Upload and Download Scripts

    Hi ALL ,
                  Can anybody help me out by the program name by which we upload and download scripts ..
    Thanks in Advance
    Regards
    Shankar

    RSTXSCRP
    Regards,
    Aparna

  • What are the file names of iphone pics and videos?.

    I am backing up all my pics to a hard drive and need to select which file types I want backed up

    Thank you, darlin!!!

  • To Find the SAP Query from the tranaction code or the program name

    Hi,
    I have a situation wherein I have to modify the sap query associated with an transaction code.But the problem is that I am unable to find the SAP Query.
    <b>Please let me know how to find the SAP query from the transaction code or the program name.</b>
    Thanks and Regards,
    Rupesh

    Hi Rupesh,
    1 use FM
      RSAQ_DECODE_REPORT_NAME
    2. This is one of the best and easiest way.
    3. It will provide u the following info.
       WORKSPACE
       USERGROUP
       QUERY    
       CLIENT   
    4. Thru TCode U must know the program name first.
       This can be discovered using SE93.
    Hope it helps.
    Regards,
    Amit M.

  • Standard Program Name for updating the System-Variables everyday in BACKGRO

    Hi All,
    Can anybody tell me the Standard Program Name for updating the System-Variables everyday in BACKGROUND job?

    Hello matt,
    I have a program with variant.
    This VARIANT input values will store in TVARVC table every day night background job.
    i want the program name

  • Windows Vista home addition want let Icloud execute. I went into the DEP program but I can not find the Apple exe file to add as ok. What is the file name?

    Windows Vista home additon want let Iclud execute. I went into the DEP program but I can not find the Apple exe file to add as ok. What is the file name?

    Hey,
    if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders.  You can then navigate all the contents as normal.
    HTH,
    S.

  • How to get the program name from transformation id.

    Dear Folks,
    Could you kindly share to me how to make it please .. ? :-).
    As we know that every update rules/transfer rules has it's own program.
    Do you know how to find the program for particular update/transfer rules .. ? If i'm not mistaken there is particular comprising about this information.
    Could you share to me what table is that and how to find it .. ?
    Tks a lot ..
    Regards,
    Niel.

    Hi Sumit,
    Tks a lot for your quick response, why i can't fetch the data from that table... ?
    What i did is like this ..
    1. tcode rsa1.
    2. expand the tree for info-provider.
    3. ctrl+c, in tech. names for update rules.
    4. Open rstran table, and input for that tech. id.
    5. Execute it.
    But no data i get.
    Does this happen only for business content ? Or Could I fetch the data even this is for customized object ..
    Still need your guidance.
    Btw, i'm now running BI 7
    Regards,
    Niel.

  • What is the "correct"  name for the new iPad?  Is it also called the 3rd Generation?

    I have the latest iPad, purchased Mar '12.  But when I read Apple News it is referred to as the "new ipad" & somtimed the 3rd Generation.  What is the "correct name & will "SIRI" be available with this Fall latest update?  Thanks!!!

    Yes, it is somewhat confusing isn't it. Almost like, the iPad is having an identity crisis. I believe the official Apple line would be that it is the "New iPad" but I see it referred to the 3rd generation just as frequently as the new iPad.
    Siri will be available for the "new iPad/3rd Gen when iOS 6 is released this fall.

  • What is the program can run this flash

    hi all, I download some flash from this funny site
    http://www.funny-pictures.com/
    but i can't run it in my computer , means my computer not my
    browser , i run it only into flash programs as flash editor or
    macromedia flash 6 (open it and click file menu and choce open and
    search it), I want to open it directly , just click it to open
    without any program

    If you know the job name, than you can find out the associated program name.
    Go to SM37.
    Select your job from the list
    Select "Step" ... here it will show you the program name
    Put cursor on the program name and Go to > Variant to know what was the input to run this job.
    Regards,
    Naimesh Patel

  • What is the Program for Sales Order Line Item Rescheduling

    Hi,
    There is a background scheduled job which does sales order line items rescheduling but I could get the name of the Program/Function Module by looking at the Jobs log. Can any one please help me?
    When does the rescheduling happen? Does it happen while creating delivery for the order? I need to understand the rescheduling the process to solve a bug in the User Exit / Screen Exit.
    Appreciate your help in Advance.
    Thanks,
    Kannan.

    If you know the job name, than you can find out the associated program name.
    Go to SM37.
    Select your job from the list
    Select "Step" ... here it will show you the program name
    Put cursor on the program name and Go to > Variant to know what was the input to run this job.
    Regards,
    Naimesh Patel

  • What are the field names for below mentioned

    Hello Friends
    What are the fields names for below tables
    in EKKO
    Purchase Document Date
    Net Value of the purchase document.
    In EKPO
    Item Description
    From which place We bought it. (It means in Sales Items there we can know from which plant we sold the goods, like in EKPO, there is any field like this)
    Please let we are defining the report to find out the stock availability for perticular storage location using select Options plant, company code, material no.
    How many tables involve her to build this report. and also field names, they come under which table.
    Please send me this information ASAP. PLz Plz Plz..........
    Regards
    Praveen

    You can check the fields of these tables via SE11
    Purchase Document Date  -  EKKO-BEDAT
    Item Description  -  EKPO-TXZ01
    Net price per item - EKPO-NETPR.
    Regards,
    Rich Heilman

  • What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro?  I need to transfer files from the old hard drive to the new computer.

    What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro?  I need to transfere files from the old hard drive to the new computer.

    No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
    I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
    I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
    synghem wrote:
    Thank you LowLuster,
    At the apple store they said I needed an esata to usb wire.  But looking at wires on line has been confusing.  Is sata the same as esata?  How do I know if I need a usb 3 or usb 2?

Maybe you are looking for